directly. We need to copyin() the strings in the iovec before
we can strcmp() them. Also, when we want to send the errmsg back
to userspace, we need to copyout()/copystr() the string.
Add a small helper function vfs_getopt_pos() which takes in the
name of an option, and returns the array index of the name in the iovec,
or -1 if not found. This allows us to locate an option in
the iovec without actually manipulating the iovec members. directly via
strcmp().
Noticed by: kris on sparc64
- Add locked variants of start, init, and ifmedia_upd.
- Add a mutex to the softc and remove spl calls.
- Use callout(9) rather than timeout(9).
- Setup interrupt handler last in attach.
- Use M_ZERO rather than bzero.
MFC after: 1 week
Tested by: wpaul
- Improve panic message if we fail to read the PCI bus number from a bridge
device.
- Don't try to lookup a BIOS IRQ for a link unless the link is routed via
an ISA IRQ since BIOSen currently only route PCI link devices via ISA
IRQs.
Tested by: Mathieu Prevot bsdhack at club-internet dot fr
MFC after: 1 week
but not provide a panic(9) implementation. Thus, enable the sanity
checks under INVARIANTS only if _KERNEL is also defined.
Submitted by: jmallett
Approved by: rwatson (mentor)
Instead, re-evaluate _BIF only when we get a notify and use the cached
results. We also still evaluate _BIF once on boot. Also, optimize the
init loop a little by only querying for a particular info if it's not valid.
MFC after: 2 days
during SMP startup. We haven't had any issues with starting up the APs
on i386 in quite a while now which is all this code is really useful for.
If someone ever does really need it they can always dig it up out of the
attic.
INO) for incorrect interrupt map entries on E250 machines. These
incorrect entries caused the INO of the on-board HME to be also
assigned to the second on-board NS16550 and to the on-board printer
port controller. Further down the road caused hme(4) to fail to attach
to the on-board HME in FreeBSD 5 and 6 as INTR_FAST and non-INTR_FAST
handlers can't share the same IRQ there (it's unknown what whould
happen in -CURRENT now that INTR_FAST and non-INTR_FAST handlers can
share an IRQ but I'd expect funny problems with uart(4)).
- Make sure there are exactly 4 PCI ranges instead of just checking
that the bridge has a 'ranges' property in the OFW device tree at all.
Besides the fact that currently the 64bit memory range isn't used by
this driver it we can't really work with less than 4 ranges and don't
have memory for more than 4 bus handles for the ranges in the softc.
- Remove sc_range and sc_nrange from softc; for the bridges supported
by this driver we no longer need to know the ranges besides the bus
handles obtained from them once this driver is attached. That way we
also can free the memory allocated for sc_range during attach again.
- Remove sc_dvmabase from the softc and pass it to psycho_iommu_init()
via an additional argument as we no longer need to know the DVMA base
in this driver once the IOMMU is initialized.
- Remove sc_dmatag from the softc, there isn't much sense in keeping
the nexus dma tag around locally.
PR: 88279 [1]
Info from: OpenSolaris [1]
Tested by: kensmith [1]
MFC after: 1 month
between this driver and other Host-PCI bridge drivers based on this one:
- Make the code fit into 80 columns.
- Make the code adhere style(9) (don't use function calls in initializers,
use uintXX_t instead of u_intXX_t, add missing prototypes, ...).
- Remove unused and superfluous struct declaration, softc member, casts,
includes, etc.
- Use FBSDID.
- Sprinkle const.
- Try to make comments and messages consistent in style throughout the
driver.
- Use convenience macros for the number of interrupts and ranges of the
bridge.
- Use __func__ instead of hardcoded function names in panic strings and
error messages. Some of the hardcoded function names actually were
outdated through moving code around. [1]
- Rename softc members related to the PCI side of the bridge to sc_pci_*
in order to make it clear which side of the bridge they refer to (so
stuff like sc_bushandle vs. sc_bh is less confusing while reading the
code).
PR: 76052 [1]
additionally on ebus(4) as the 'SUNW,envctrl' devices (as well as
'SUNW,envctrltwo' and 'SUNW,rasctrl', which we might want to also
support in envctrl.c in the future) are only found on EBus.
on powerpc (more or less...). That way people updating from FreeBSD 5 to
FreeBSD 6 and beyond on sparc64 will get an error from config(8) rather
than a mysterious compile error when they have a stale 'device zs' in
their kernel config file.
MFC after: 2 weeks
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
to attach a child gracefully instead of panicing, move the printing
of child resources common to bus_print_child() and bus_probe_nomatch()
implementations of a bus into a <bus>_print_res() function, ...) and
fix some minor bugs and nits (plug memory leaks present when attaching
a bus or child device fails, remove unused struct members, ...).
Additional testing by: kris (central(4) and fhc(4))
a newly introduced struct ofw_bus_devinfo which can hold the OFW info
of a device recallable via the ofw_bus KOBJ interface. Introduce a set
of functions ofw_bus_gen_get_*() which use ofw_bus_default_get_devinfo()
to provide generic subroutines for implementing the rest of the ofw_bus
KOBJ interface in a bus driver.
This is inspired by bus_get_resource_list() and bus_generic_rl_*_resource()
and allows to reduce code duplication in bus drivers as they only have
to provide an ofw_bus_default_get_devinfo() implementation in order to
provide the ofw_bus KOBJ interface via ofw_bus_gen_get_*().
- While here add a comment to ofw_bus_if.m describing the intention of
the ofw_bus KOBJ interface.
Reviewed by: marcel
If the complete reply on the TRANS2_FIND_FIRST2 request fits exactly
into one responce packet, then next call to TRANS2_FIND_NEXT2 will return
zero entries and server will close current transaction. To avoid
subsequent errors we should not perform FIND_CLOSE2 request.
PR: kern/78953
Submitted by: Jim Carroll
connection queue for a new connection. It was removing connections
from the wrong list.
Submitted by: Paul Mikesell
Sponsored by: Isilon Systems
MFC after: 1 week
the tree.
- Add locked variants of nve_start(), nve_init(), and nve_ifmedia_upd().
- Use callout_* to manage callouts rather than timeout(9).
- Mark interrupt handler MPSAFE (IFF_NEEDGIANT was already clear).
- Lock the driver lock in driver entry points such as the interrupt
handler, if_start, and if_init rather than locking the driver mutex
in the various work functions called by the binary blob. The spin lock
used by the binary block can probably be stubbed out now.
- Use IFQ_DRV_IS_EMPTY() macro rather than doing it by hand.
- Fix locking in detach.
- Remove some unused fields from the softc.
Tested by: cognet
MFC after: 2 weeks
the IRQ set by the BIOS in existing devices to actually get the correct
bus number of the child PCI bus. I was not reading the bus number from
the bridge device correctly. The __BUS_ACCESSOR() macros (from which
pcib_get_bus() is built) assume that the passed in argument is a child
device. However, at the time I'm reading the bus there is no child
device yet, so I was passing in the pcib device as the child device.
The parent of the pcib device probably returned an error in the case of
a host bridge, thus resulting in random stack garbage for the bus number.
For PCI-PCI bridges, the bus number being used was actually the subvendor
of the PCI-PCI bridge device itself.
MFC after: 1 week
- Don't call tulip_addr_filter() to reset the RX address filter in
tulip_reset() since that gets called before ether_ifattach(). Just
call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
thing with the added bonus that we leaked the driver lock if the MTU
was > ETHERMTU in the homerolled version. This part will be MFC'd.
Clue from: wpaul (1)
Stolen from: marcel (2 via patch for dc(4))
MFC after: 1 week
via the DEFAULTS kernel configs. This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.
I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and
amd64. Additionally, on ia64 enable ACPI by default since ia64 requires
acpi.
event of an error, does the right thing, in terms of setting
the error flags in the buf header. That fixes a crash from
bstrategy().
- Treat ETIMEDOUT as a "recoverable" error, causing the buffer
to be re-dirtied. ETIMEDOUT can occur on soft mounts, when
the number of retries are exceeded, and we don't want data loss
in that case.
Submitted by: Mohan Srinivasan
during boot up. Now we do a full reset of the 8259As and setup a simple
interrupt handler (we actually borrow the apic one that just does an
immediate iret) to handle any spurious interrupts triggered by either chip.
This should fix some folks that were getting a Trap 30 during bootup of
certain SMP AMD systems. This might get pushed into the 6.0 branch as an
errata. For now a suitable workaround is to add 'device atpic' to your
kernel config.
Tested by: scottl
Helpful info from: dillon
MFC after: 1 week
buildkernel: provide a real but dummy name to ${DEPENDFILE}
so that the relevant exists() check in bsd.prog.mk fails and
ensures that ${GENHDRS} are built before any other objects.
MFC after: 3 days
