9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue
illumos/illumos-gate@20b5dafb42
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some
platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that
volumes be "thick provisioned", where supported by the platform (VMware).
Thick provisioning is time consuming and often is ignored. If the thick
provision step is omitted, customers will see suboptimal performance until
we have written to all parts of the LUN. ZFS should be able to initialize
any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
Ensure that the TCP connections are terminated gracefully as expected
by the test. Use appropriate numbers for sent/received packets.
In addition, enable tst.localtcpstate.ksh, which should pass, but
doesn't until https://reviews.freebsd.org/D16369 is committed.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16288
This change is similar to the one done in r286171 for
tst.ipv4localtcp.ksh. This not only reduces the requirements on the
system used for testing but results also in a graceful teardown of
the TCP connection.
Reviewed by: gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16276
The code imported from opensolaris was depending on ping supporting
UDP for sending probes. Since this is not supported by ping on FreeBSD
use a perl script instead.
The remote test requires the usage of ksh93, so state that in the
sheband.
Enable the local test, but keep the remote test disabled, since it
requires a remote machine on the LAN.
Reviewed by: markj@, gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16268
Since we don't have /usr/bin/ksh, use a generic way of specifying
ksh. Some of the tests only run with ksh93, so use this shell
for these tests. Two of the tests don't have the execute bit set,
so fix this, too.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16270
In some cases, the required information is not available and the
UDP provider reported an empty string in this case and the IP
and TCP provider reported a NULL pointer.
This patch changes the value provided in this case to the string
"<unknown>". This make the behaviour consistent and in-line with
the behaviour of Solaris.
Reviewed by: markj@, dteske@, gnn@
Differential Revision: https://reviews.freebsd.org/D15855
At the moment ctfconvert(1) does not do much with such CUs, but
that may not be true in the future, and we run ctfconvert on several
assembly files during the build.
X-MFC with: r334883
ctfconvert(1) is not designed to handle DWARF generated from such code,
and will generally fail in non-obvious ways. Use an explicit check to
help catch such potential failures.
Reported by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 2 weeks
d4a72f2386
During scans (scrubs or resilvers), it sorts the blocks in each transaction
group by block offset; the result can be a significant improvement. (On my
test system just now, which I put some effort to introduce fragmentation into
the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the
changes.) I've seen similar rations on production systems.
Approved by: Alexander Motin
Obtained from: ZFS On Linux
Relnotes: Yes (improved scrub performance, with tunables)
Differential Revision: https://reviews.freebsd.org/D15562
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Profiles that perform post-processing of the DTrace output were
dropping the "-t test" option on the floor. Fix handling of this
option for said profiles.
X-MFC-to: stable/11
X-MFC-with: r334261-334262
Sponsored by: Smule, Inc.
"Developer mode" (passing of "-dev" options), which enables debugging
features on compilation error, used to dim lines unrelated to error.
That proved distracting and feedback from testers also confirmed that
simply highlighting the line the compiler complains about is enough.
Sponsored by: Smule, Inc.
dwatch allows you to customnize the predicate (condition) for when
information is displayed. The DTrace syntax for this is:
probe[, ...] /predicate/ { [actions] }
But if predicate is something like "*args[1]!=NULL" to test that
the first pointer in an array is non-NULL, the syntax produced is:
probe[, ...] /*arg1!=NULL/ { [actions] }
The issue being that "/*" is the beginning of a comment and thus
the following error is emitted:
dtrace: failed to compile script /dev/stdin:
line 535: /* encountered inside a comment
This patch adds whitespace around the argument given to -t,
producing:
probe[, ...] / *arg1!=NULL / { [actions] }
Sponsored by: Smule, Inc.
The profile for send(2)/recv(2) observation has been refactored to
eliminate alloca() in favor of translations available in HEAD.
Sponsored by: Smule, Inc.
Knowing the value of execname during these probes is of some value even
if it is commonly the interrupt kernel thread (intr[12]) -- quite often
it is not, but that depends on the probe.
Sponsored by: Smule, Inc.
A module that wishes to post-process the output needs to know which
arguments were passed in order to re-execute a child in a pipe-chain.
Further, the expansion of ARGV needs to be such that items are escaped
properly.
Sponsored by: Smule, Inc.
If you were to pass an invalid option after `-B num' or `-K num' you
would see that the usage statement would show the value you passed
instead of the actual default.
Moving the default values to separate variables that are unaffected
by the options-parsing allows the usage statement to correctly show
the hard-coded default values if no flags are used.
Sponsored by: Smule, Inc.
A return statement should have been an exit in list_profiles().
If the user passed `-Q' to list profiles and asked for one-line
per profile (`-1'), list_profiles() would not exit as should.
Sponsored by: Smule, Inc.
https://github.com/illumos/illumos-gate/edit/master/usr/src/lib/libzfs/common/libzfs_sendrecv.c
Patch our version of it to quiesce warnings until someone decides to sync
up our code:
libzfs_sendrecv.c:2555:30: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", thisguid);
~~~ ^~~~~~~~
%llu
libzfs_sendrecv.c:2612:29: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", parent_fromsnap_guid);
~~~ ^~~~~~~~~~~~~~~~~~~~
%llu
libzfs_sendrecv.c:2645:29: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", parent_fromsnap_guid);
~~~ ^~~~~~~~~~~~~~~~~~~~
%llu
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15325
The default provides output in the following form:
```
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP
HEALTH ALTROOT
```
this corrects the man page.
Also submitted upstream as
https://github.com/openzfs/openzfs/pull/632/files (with slightly
different changes needed)
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
In recently added sendrecv profile, there was a line purposefully
added to introduce a compilation error in which `-dev' is used to
debug the entry. Removing the entry.
Sponsored by: Smule, Inc.
The options `-d' (debug), `-e' (exit after compile), and `-v' (verbose)
when combined in any order (though best remembered as `-dev') will run
the conflated script through dtrace(1), test for error conditions, and
show the line that dtrace(1) failed at (with context).
If no errors are found, the output is the same as `-e[v]'.
When writing a new profile for dwatch(1), you can quickly test to
make sure it compiles by running `dwatch -devX profile_name' where
profiles live in /usr/libexec/dwatch or /usr/local/libexec/dwatch
(the latter being where profiles installed via ports should go).
Sponsored by: Smule, Inc.
The change adds -t <name> option to zpool create and -t option to zpool
import in its form with an old name and a new name. This allows to
import (or create) a pool under a name that's different from its real,
permanent name without affecting that name. This is useful when working
with VM images or images of other physical systems if they happen to
have a ZFS pool with the same name as the host system.
The changes come from ZoL with some small tweaks.
The porting has been done by julian.
The change is being submitted to OpenZFS:
https://github.com/openzfs/openzfs/pull/600
Submitted by: julian
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura (porting)
Differential Revision: https://reviews.freebsd.org/D14972
9280 Assertion failure while running removal_with_ganging test with 4K devices
illumos/illumos-gate@243952c7ee
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matt Ahrens <Matt.Ahrens@delphix.com>
9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3eb
We want to be able to pass various settings during import/open of a pool,
which are not only related to rewind. Instead of adding a new policy and
duplicate a bunch of code, we should just rename rewind_policy to a more
generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we want
those flags not only for the import case, but also for the open case. One
such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would
allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@8671400134
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with
exactly that. It can be thought of as a “pool-wide snapshot” (or a
variation of extreme rewind that doesn’t corrupt your data). It remembers
the entire state of the pool at the point that it was taken and the user
can revert back to it later or discard it. Its generic use case is an
administrator that is about to perform a set of destructive actions to ZFS
as part of a critical procedure. She takes a checkpoint of the pool before
performing the actions, then rewinds back to it if one of them fails or puts
the pool into an unexpected state. Otherwise, she discards it. With the
assumption that no one else is making modifications to ZFS, she basically
wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
8809 libzpool should leverage work done in libfakekernel
illumos/illumos-gate@f06dce2c1f
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andrew Stormont <astormont@racktopsystems.com>
We do not have libfakekernel, but need to reduce code divergence.
