MK_LOADER_ZFS is the current spelling of enabling or disabling ZFS
builds. Use it instead of MK_ZFS.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35896
We build lua by default, so we don't need another build to build it
enabled w/o FORTH. That gives little value over the without forth
builds. Remove all mips, they are no longer relevant. Build aarch64
everywhere we build amd64 (except firewire which is x86 only). Build a
few more architectures once so we have at least one of every arch we
support in at least the default build. This should increase coverage
and still take less time than before.
Sponsored by: Netflix
FreeBSD sh supports this but other common POSIX shells do not; in
particular, dash does not, unlike bash and zsh. This allows the script
to be used on non-FreeBSD systems for release media building.
Reviewed by: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D34000
QEMU (now) includes a prebuilt EDK II firmare in edk2-x86_64-code.fd.
Use that instead of requring a standalone uefi-edk2-qemu-x86_64 package.
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30915
Parallel builds of stand should be assumed both possible and safe as of
7012461c9b, so let's start using some jobs to speed up lualoader test
harness builds.
luacheck rightfully complains that i is unused in the show-module-options
loop at the end (it was used for some debugging in the process).
We've added a new pager module that's compiled in, so declare that as an
acceptable global.
RISC-V has the same booting requirements as arm64 (loader.efi, no legacy
boot options), so generated images for both architectures have the same
partition layout.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D27044
Rather than hard coding ada0 everywhere, use ${dev}. Also, set
dev=vtbd0 since both qemu and bhyve support this. More work
should be done to use labels instead for fstab.
qemu scripts likely need adjustment. And we should also
likely generate byhve scripts too.
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
directory.
Add a quick sanity check to objdir before using it. It must start
with /. If there was a make error getting it, report that and continue
with the next target. If there was anything else, bail out.
With this last piece in place, make -C /usr/src/release release.iso is
finally able to run in a jail. This was not possible before because
msdosfs cannot be mounted inside a jail.
Submitted by: ryan@ixsystems.com
Reviewed by: emaste@, imp@, gjb@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21385
It seems to be incompatible with the OVMF.fd (of unknown provenance)
in use by the Cirrus-CI config. We will soon have a known OVMF build
via a port/package (see review D19869) and we can switch back to q35
once packages are available.
Discussed with: bcran
Update ci-qemu-test.sh
o Update the path to the OVMF file, which is now in /usr/local/share/uefi-edk2-qemu.
o Use the more modern q35, pc-q35-3.0 (Q35 + ICH9, 2009) QEMU machine
instead of the default, obsolete pc, pc-i440fx-3.0 (i440FX + PIIX, 1996).
For example this adds ACPI support.
o Specify the system firmware using the newer pflash drive syntax instead
of bios.
o Remove extra, unneeded devices by passing -nodefaults.
o Change text to talk about 'firmware' instead of 'bios', since UEFI
isn't a BIOS.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D20074
ufs partition as p2, and put the zfs partition at p3, to test the ability
of the zfs probe code to find a zfs pool on something other than the first
partition.
tools/boot/install-boot.sh was assuming that if a device was passed in,
it should operate on the current system and run efibootmgr etc. to
update the boot manager. However, rootgen.sh passes a md(4) device and
not a fixed disk.
Add a -u option to install-boot.sh to tell it to update the system
in-place and run efibootmgr etc.
Also, source install-boot.sh in rootgen.sh to allow it to find and
call make_esp_file etc. And pass the loader file to make_esp_file instead
of a directory name.
Reported by: ian
Reviewed by: ian,imp,tsoome
Differential Revision: https://reviews.freebsd.org/D19992
See r346250 and followup commits and mailing list discussion.
We currently fail to boot properly in the absense of boot-time entropy.
Sponsored by: The FreeBSD Foundation
the temporary image in $TMPDIR.
Allow the script to be run from the src/tools/boot directory by using make
-V SRCTOP to find the top of the tree, because this script is handy for
quick smoke-testing of loader changes, as well as being useful in CI testing.
Also, use a temp directory in $TMPDIR to assemble the boot image, and write
the boot log file to $TMPDIR. Arrange to have the temporary image clean
itself up, but leave the log file in $TMPDIR for post-mortem analysis of
failures when the script is run interactively.
Differential Revision: https://reviews.freebsd.org/D19876
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
Use userboot.so from the test directory if possible, fall back to .OBJDIR.
This avoids a problem that we've had since userboot coexistence was added,
where userboot.so alone no longer exists in the .OBJDIR but is instead just
a link installed later.
This is purely to make it easier to tweak them locally; the machine I have
for testing takes forever to do 50,000 pw strengthening iterations, and
we're not testing the strength of geli's anti-pw-guessing logic here
(especially given that our test passphrase is "passphrase", except that
I tend to tweak that also, to 'x', because typing is hard).
Some day these should be settable as cmdline args. But then, some day this
whole script should probably get a rewrite. :)
Cope for the fact that laoder.efi, not being boot1, doesn't read
/boot.config by setting boot_serial and force the serial console.
Also add sysctl so we can display the boot method.
Provide a variable, do_boot1_efi, if you want to use boot1 for
testing. But since it's transient, it's just a variable and not
available on the command line.
This extends the test suite to generate images for every combination of:
amd64: mbr/gpt geli/nogeli ufs/zfs legacy/uefi/both
Except for mbr+geli, which is not currently possible.
Reviewed by: imp (previous version)
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15846
128MiB still works for Legacy booting, however. Go ahead and do 256MiB
for all amd64 boxes, since the number of such boxes < 256MiB is
vanishingly small.
We want to use the versions of the bootcode we just built, rather than
ones from whatever happens to be in /boot on the test machine
These were incorrectly added by me in r334888