pf by default does not do per-table address accounting unless the
"counters" keyword is specified in the corresponding pf.conf table
definition. Yet, we always allocate 12 per-CPU counters per table. For
large tables this carries a lot of overhead, so only allocate counters
when they will actually be used.
A further enhancement might be to use a dedicated UMA zone to allocate
counter arrays for table entries, since close to half of the structure
size comes from counter pointers. A related issue is the cost of
zeroing counters, since counter_u64_zero() calls smp_rendezvous() on
some architectures.
Reported by: loos, Jim Pingle <jimp@netgate.com>
Reviewed by: kp
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D24803
Nexthop objects implementation, defined in r359823,
introduced sys/net/route directory intended to hold all
routing-related code. Move recently-introduced route_temporal.c and
private route_var.h header there.
Differential Revision: https://reviews.freebsd.org/D24597
The pf_frag_mtx mutex protects the fragments queue. The fragments queue
is virtualised already (i.e. per-vnet) so it makes no sense to block
jail A from accessing its fragments queue while jail B is accessing its
own fragments queue.
Virtualise the lock for improved concurrency.
Differential Revision: https://reviews.freebsd.org/D24504
If we pass an anchor name which doesn't exist pfr_table_count() returns
-1, which leads to an overflow in mallocarray() and thus a panic.
Explicitly check that pfr_table_count() does not return an error.
Reported-by: syzbot+bd09d55d897d63d5f4f4@syzkaller.appspotmail.com
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24539
Both DIOCCHANGEADDR and DIOCADDADDR take a struct pf_pooladdr from
userspace. They failed to validate the dyn pointer contained in its
struct pf_addr_wrap member structure.
This triggered assertion failures under fuzz testing in
pfi_dynaddr_setup(). Happily the dyn variable was overruled there, but
we should verify that it's set to NULL anyway.
Reported-by: syzbot+93e93150bc29f9b4b85f@syzkaller.appspotmail.com
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24431
Switch uRPF to use specific fib(9)-provided uRPF.
Switch MSS calculation to the latest fib(9) kpi.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D24386
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
Mark all nodes in pf, pfsync and carp as MPSAFE.
Reviewed by: kp
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23634
If we have a 'set skip on <ifgroup>' rule this flag it set on the group
kif, but must also be set on all members. pfctl does this when the rules
are set, but if groups are added afterwards we must also apply the flags
to the new member. If not, new group members will not be skipped until
the rules are reloaded.
Reported by: dvl@
Reviewed by: glebius@
Differential Revision: https://reviews.freebsd.org/D23254
As of r356974 calls to ip_output() require us to be in the network epoch.
That wasn't the case for the calls done from pfsyncintr() and
pfsync_defer_tmo().
There's no reason for this to be a tunable. It's perfectly safe to
change this at runtime.
Reviewed by: Lutz Donnerhacke
Differential Revision: https://reviews.freebsd.org/D22737
Rework tcpopts_parse() to be more strict. Use const pointer. Add length
checks for specific TCP options. The main purpose of the change is
avoiding of possible out of mbuf's data access.
Reported by: Maxime Villard
Reviewed by: melifaro, emaste
MFC after: 1 week
datagrams.
Previously destination address from original datagram was used. That
looked confusing, especially in the traceroute6 output.
Also honor IPSTEALTH kernel option and do TTL/HLIM decrementing only
when stealth mode is disabled.
Reported by: Marco van Tol <marco at tols org>
Reviewed by: melifaro
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D22631
PULLUP_LEN_LOCKED().
PULLUP_LEN_LOCKED() could update mbuf and thus we need to update related
pointers that can be used in next opcodes.
Reported by: Maxime Villard <max at m00nbsd net>
MFC after: 1 week
icmp_reflect(), called through icmp_error() requires us to be in NET_EPOCH.
Failure to hold it leads to the following panic (with INVARIANTS):
panic: Assertion in_epoch(net_epoch_preempt) failed at /usr/src/sys/netinet/ip_icmp.c:742
cpuid = 2
time = 1571233273
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00e0977920
vpanic() at vpanic+0x17e/frame 0xfffffe00e0977980
panic() at panic+0x43/frame 0xfffffe00e09779e0
icmp_reflect() at icmp_reflect+0x625/frame 0xfffffe00e0977aa0
icmp_error() at icmp_error+0x720/frame 0xfffffe00e0977b10
pf_intr() at pf_intr+0xd5/frame 0xfffffe00e0977b50
ithread_loop() at ithread_loop+0x1c6/frame 0xfffffe00e0977bb0
fork_exit() at fork_exit+0x80/frame 0xfffffe00e0977bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00e0977bf0
Note that we now enter NET_EPOCH twice if we enter ip_output() from pf_intr(),
but ip_output() will soon be converted to a function that requires epoch, so
entering NET_EPOCH directly from pf_intr() makes more sense.
Discussed with: glebius@
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
Avoid potential structure padding leak. r350294 identified a leak via
static analysis; although there's no report of a leak with the
DIOCGETSRCNODES ioctl it's a good practice to zero the memory.
Suggested by: kp
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ACTION_PTR() returns pointer to the start of rule action section,
but rule can keep several rule modifiers like O_LOG, O_TAG and O_ALTQ,
and only then real action opcode is stored.
ipfw_get_action() function inspects the rule action section, skips
all modifiers and returns action opcode.
Use this function in ipfw_reset_eaction() and flush_nat_ptrs().
MFC after: 1 week
Sponsored by: Yandex LLC
Remove our (very partial) support for RFC2675 Jumbograms. They're not
used, not actually supported and not a good idea.
Reviewed by: thj@
Differential Revision: https://reviews.freebsd.org/D21086
After r343619 ipfw uses own locking for packets flow. PULLUP_LEN() macro
is used in ipfw_chk() to make m_pullup(). When m_pullup() fails, it just
returns via `goto pullup_failed`. There are two places where PULLUP_LEN()
is called with IPFW_PF_RLOCK() held.
Add PULLUP_LEN_LOCKED() macro to use in these places to be able release
the lock, when m_pullup() fails.
Sponsored by: Yandex LLC
After r343631 pfil hooks are invoked in net_epoch_preempt section,
this allows to avoid extra locking. Add NET_EPOCH_ASSER() assertion
to each ipfw_bpf_*tap*() call to require to be called from inside
epoch section.
Use NET_EPOCH_WAIT() in ipfw_clone_destroy() to wait until it becomes
safe to free() ifnet. And use on-stack ifnet pointer in each
ipfw_bpf_*tap*() call to avoid NULL pointer dereference in case when
V_*log_if global variable will become NULL during ipfw_bpf_*tap*() call.
Sponsored by: Yandex LLC
It is possible, that opcode at the ACTION_PTR() location is not real
action, but action modificator like "log", "tag" etc. In this case we
need to check for each opcode in the loop to find O_EXTERNAL_ACTION.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
instead of a linear array.
The multicast memberships for the inpcb structure are protected by a
non-sleepable lock, INP_WLOCK(), which needs to be dropped when
calling the underlying possibly sleeping if_ioctl() method. When using
a linear array to keep track of multicast memberships, the computed
memory location of the multicast filter may suddenly change, due to
concurrent insertion or removal of elements in the linear array. This
in turn leads to various invalid memory access issues and kernel
panics.
To avoid this problem, put all multicast memberships on a STAILQ based
list. Then the memory location of the IPv4 and IPv6 multicast filters
become fixed during their lifetime and use after free and memory leak
issues are easier to track, for example by: vmstat -m | grep multi
All list manipulation has been factored into inline functions
including some macros, to easily allow for a future hash-list
implementation, if needed.
This patch has been tested by pho@ .
Differential Revision: https://reviews.freebsd.org/D20080
Reviewed by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.
# ipfw add deny log tcp from any to any tcpmss 0-500
Reviewed by: melifaro,bcr
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
- Perform ifp mismatch checks (to determine if a send tag is allocated
for a different ifp than the one the packet is being output on), in
ip_output() and ip6_output(). This avoids sending packets with send
tags to ifnet drivers that don't support send tags.
Since we are now checking for ifp mismatches before invoking
if_output, we can now try to allocate a new tag before invoking
if_output sending the original packet on the new tag if allocation
succeeds.
To avoid code duplication for the fragment and unfragmented cases,
add ip_output_send() and ip6_output_send() as wrappers around
if_output and nd6_output_ifp, respectively. All of the logic for
setting send tags and dealing with send tag-related errors is done
in these wrapper functions.
For pseudo interfaces that wrap other network interfaces (vlan and
lagg), wrapper send tags are now allocated so that ip*_output see
the wrapper ifp as the ifp in the send tag. The if_transmit
routines rewrite the send tags after performing an ifp mismatch
check. If an ifp mismatch is detected, the transmit routines fail
with EAGAIN.
- To provide clearer life cycle management of send tags, especially
in the presence of vlan and lagg wrapper tags, add a reference count
to send tags managed via m_snd_tag_ref() and m_snd_tag_rele().
Provide a helper function (m_snd_tag_init()) for use by drivers
supporting send tags. m_snd_tag_init() takes care of the if_ref
on the ifp meaning that code alloating send tags via if_snd_tag_alloc
no longer has to manage that manually. Similarly, m_snd_tag_rele
drops the refcount on the ifp after invoking if_snd_tag_free when
the last reference to a send tag is dropped.
This also closes use after free races if there are pending packets in
driver tx rings after the socket is closed (e.g. from tcpdrop).
In order for m_free to work reliably, add a new CSUM_SND_TAG flag in
csum_flags to indicate 'snd_tag' is set (rather than 'rcvif').
Drivers now also check this flag instead of checking snd_tag against
NULL. This avoids false positive matches when a forwarded packet
has a non-NULL rcvif that was treated as a send tag.
- cxgbe was relying on snd_tag_free being called when the inp was
detached so that it could kick the firmware to flush any pending
work on the flow. This is because the driver doesn't require ACK
messages from the firmware for every request, but instead does a
kind of manual interrupt coalescing by only setting a flag to
request a completion on a subset of requests. If all of the
in-flight requests don't have the flag when the tag is detached from
the inp, the flow might never return the credits. The current
snd_tag_free command issues a flush command to force the credits to
return. However, the credit return is what also frees the mbufs,
and since those mbufs now hold references on the tag, this meant
that snd_tag_free would never be called.
To fix, explicitly drop the mbuf's reference on the snd tag when the
mbuf is queued in the firmware work queue. This means that once the
inp's reference on the tag goes away and all in-flight mbufs have
been queued to the firmware, tag's refcount will drop to zero and
snd_tag_free will kick in and send the flush request. Note that we
need to avoid doing this in the middle of ethofld_tx(), so the
driver grabs a temporary reference on the tag around that loop to
defer the free to the end of the function in case it sends the last
mbuf to the queue after the inp has dropped its reference on the
tag.
- mlx5 preallocates send tags and was using the ifp pointer even when
the send tag wasn't in use. Explicitly use the ifp from other data
structures instead.
- Sprinkle some assertions in various places to assert that received
packets don't have a send tag, and that other places that overwrite
rcvif (e.g. 802.11 transmit) don't clobber a send tag pointer.
Reviewed by: gallatin, hselasky, rgrimes, ae
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
Now that we don't hold a lock during DIOCRSETTFLAGS memory allocation we can
use M_WAITOK.
MFC after: 1 week
Event: Aberdeen hackathon 2019
Pointed out by: glebius@