that of the tun instance even for the !AF_INET case, and properly
remove configured addresses by calling if_purgeaddrs().
Maintain the TUN_DSTADDR behaviour for compatibility with the OS/390
emulator.
MFC after: 3 weeks
PR: 100080
Reviewed by: bz
Make devfs cloning a sysctl/tunable which defaults to on.
If devfs cloning is enabled, only the super-user may create
tun(4)/tap(4)/vmnet(4) instances. Devfs cloning is still enabled by
default; it may be disabled from the loader or via sysctl with
"net.link.tap.devfs_cloning" and "net.link.tun.devfs_cloning".
Disabling its use affects potentially all tun(4)/tap(4) consumers
including OpenSSH, OpenVPN and VMware.
PR: 105228 (potentially also 90413, 105570)
Submitted by: Landon Fuller
Tested by: Andrej Tobola
Approved by: core (rwatson)
MFC after: 4 weeks
of a tap(4) instance, if IFF_PROMISC is not set.
In tap(4), we should emulate the effect IFF_PROMISC would have on
hardware, otherwise we risk introducing layer 2 loops if tap(4) is
used with bridges. This means not even bpf(4) gets to see them.
This patch has been tested in a variety of situations. Multicast and
broadcast frames are correctly allowed through. I have observed this
behaviour causing problems with multiple QEMU instances hosted on
the same FreeBSD machine.
The checks in in ether_demux() [if_ethersubr.c, rev 1.222, line 638]
are insufficient to prevent this bug from occurring, as ifp->if_vlantrunk
will always be NULL for the non-vlan case.
MFC after: 3 weeks
PR: 86429
Submitted by: Pieter de Boer (with changes)
not used in any of our code. Also remove explicit padding variable that
kept the bpf_d structure the same size before and after the change in
select implementation, since binary compatibility is not required for this
data structure on 7-CURRENT.
- Micro-optimize the addition of an 802.1q header to match the removal code.
- Consistently check for interfaces being up and running.
- Consistently use NULL instead of 0 with pointers.
semantics.
- Stop testing bpf pointers for NULL. In some cases use
bpf_peers_present() and then call the function directly inside the
conditional block instead of the macro.
- For places where the entire conditional block is the macro, remove the
test and make the macro unconditional.
- Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of
the old semantics.
Reviewed by: csjp (older version)
in the Public Safety Band):
o add channel flags to identify half/quarter-rate operation
o add rate sets (need to check spec on 4Mb/s in 1/4 rate)
o add if_media definitions for new rates
o split net80211 channel setup out into ieee80211_chan_init
o fixup ieee80211_mhz2ieee and ieee80211_ieee2mhz to understand half/quarter
rate channels: note we temporarily use a nonstandard/hack numbering that
avoids overlap with 2.4G channels because we don't (yet) have enough
state to identify and/or map overlapping channel sets
o fixup ieee80211_ifmedia_init so it can be called post attach and will
recalculate the channel list and associated state; this enables changing
channel-related state like the regulatory domain after attach (will be
needed for 802.11d support too)
o add ieee80211_get_suprates to return a reference to the supported rate
set for a given channel
o add 3, 4.5, and 27 MB/s tx rates to rate <-> media conversion routines
o const-poison channel arg to ieee80211_chan2mode
Add a pointer to the relevant PR for future reference. The whole comment
will be OK to remove as soon as the general solution is applied.
PR: kern/105943
In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
The symptoms were that outgoing DHCP requests for diskless kernels
had the IP header corrupt. After long investigations, the source of
the problem was found in ether_output() - for SIMPLEX interfaces
and broadcast traffic, a copy of the packet is passed back to the kernel
through if_simloop(). However if_simloop() modifies the mbuf, while
the copy obtained through m_copym() is a readonly one.
The bug has been there forever, but it has been triggered only recently
by a change in sosend_dgram() which passed down mbufs with sufficient
space to prepend the header.
This fix is trivial - use m_dup() instead of m_copy() to create
the copy. As an alternative, we could try and modify if_simloop()
to play safely with readonly mbufs, but i don't think it is worthwhile
because 1) this is a relatively infrequent code path so we do not need
to worry too much about performance, and 2) the cost of doing an
extra m_pullup in if_simloop() is probably the same as doing the
copy of the cluster, anyways.
MFC after: 1 week
of the bridge port and path cost have been administratively set or
calculated automatically by RSTP.
Make sure to transition from non-edge to edge when the port goes down
and the edge flag was manually set before.
This is needed to comply with the condition
((!portEnabled && AdminEdge) || ....)
in the Bridge Detection State Machine (IEE802.1D-2004, p. 171).
Reviewed by: thompsa
Approved by: bz (mentor)
on the arm. Add an assert to ensure that the size is 8 to prefent others
from falling into this trap (we should have more of these).
Why the construct:
struct foo {
union bar {
struct {
...
} __packed fred;
...
} __packed wilma;
} __packed;
has a different packing than:
struct foo {
union bar {
struct {
...
} fred __packed;
...
} wilma __packed;
} __packed;
is beyond my ability to ferret out of the gcc documentation. Most
likely some subtle binding issue (eg before it says the struct itself
is packed, while after it means that the whole struct is packed into
the thing it is in). Pointers to relevant documentation would be
appreciated.
sizeof ether_header is 2 * ETHER_ADDR_LEN + 2 (14) bytes long
sizeof ether_addr is ETHER_ADDR_LEN bytes long
On arm, this shows that struct ether_addr needs to be __packed.
The first condition muts be true for the bridging code to not dump core.
The second one appears to be implicitly relied upon by wi (but many
of the rids it sends down likely need __packed too to be safe) and
maybe others. It appears to not hurt anything.
if_watchdog/if_timer interface doesn't fit modern SMP network
stack design.
Device drivers that need watchdog to monitor their hardware should
implement it theirselves.
Eventually the if_watchdog/if_timer API will be removed. For now,
warn that driver uses it.
Reviewed by: scottl
enables direct dispatch of the network stack from the device driver
ithread, enabling input path parallelism by default when multiple
interfaces are present.
The strategy for network stack parallelism is something being actively
discussed, and this is just one of several possible (and perfectly
reasonable) strategies, but has the distinct advantage of reducing the
number of context switches and preemptions significantly, resulting in
higher efficiency in many cases. In some caes, this may reduce
network stack parallelism due to work not being deferred from the
ithread to the netisr. Therefore, the strategy may change in the
future, but this offers a reasonable first pass and enabling
parallelism while maintaining strong ordering.
Hopefully this will trigger lots of nice new bugs.
This change is not intended for MFC.
- use flags rather than sperate ioctls for edge, p2p
- implement p2p and autop2p flags
- define large pathcost constant as ULL
- show bridgeid and rootid in ifconfig
Obtained from: Reyk Floeter <reyk@openbsd.org>
at the start of rtalloc1(). This backs out part of revs 1.83 and 1.85.
Profiling on an i386 showed that that for sending tiny packets using
bge, -current takes 7 bzero()s where RELENG_4 takes only 1, and that
bzero()ing is now the dominant overhead (10-12%, up from 1%, but
profiling overestimated this a bit). This commit backs out 2 of the
6 extra bzero()s (1 in each of 2 calls per packet to rtalloc1()). They
were the largest ones by byte count (48 bytes each) but perhaps not
by time (small misaligned ones might take longer).
processing are forced to toggle this functionality when the card
is put in and out of promiscuous mode. The main reason for this
is because the hardware strips the VLAN tag, making it impossible
for the tag information to show up in network diagnostic tools like
tcpdump(1).
This change introduces ether_vlan_mtap(), which is called if the
mbuf has M_VLANTAG set. VLAN information is extracted from the
mbuf and inserted into a stack allocated ether vlan header which
is then inserted through the bpf machinery via bpf_mtap2(). The
original mbuf's data pointer and lengths are temporarily adjusted
to eliminate the original Ethernet header for the duration of the
tap operation. This should have no long term effects on the mbuf.
Also, define a new macro, ETHER_BPF_MTAP which should be used
by drivers which support hardware offload of VLAN tag processing.
The fixes for the relevant drivers will follow shortly.
Discussed with: rwatson, andre, jhb (and others)
Much feedback from: sam, ru
MFC after: 1 month [1]
[1] The version that is eventually MFCed will be somewhat
different then this, as there has been significant work
done to the VLAN code in HEAD.
constratins on arm; this fixes bridging when packets are
rx'd so ip headers are 32-bit aligned
Reviewed by: imp (and discussed elsewhere)
MFC after: 2 weeks
- Each stp port is added sequentially so it was possible for our bridgeid to
change every time because the new port has a lower MAC address. Instead
just find the lowest MAC address from all Ethernet adapters in the machine
as the value only needs to be unique, this stops a lot of churn on the
protocol.
- Update the states after enabling or disabling a port.
- Keep tabs if we have been stopped or started by our parent bridge.
- The callout only needs to be drained before destroying the mutex, move it to
bstp_detach.
address learned by the bridge is made permanent, the address will not age out
and most importantly will not migrate to another interface.
This can be used to stop mac address poisoning or clients roaming in much the
same way as static entries without the hassle of preloading the table.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
we never initialize it to anything else. However, in the case that
m_uiotombuf fails, we return error (effectively reporting success).
This appears to be a relic of an older revision of this file, where
"error" used to be doing something useful. (See revision 1.1, where
error is used in a loop with uiomove() instead of using m_uiotomubf).
So instead on unconditionally reporting success in the case there is
a failure in m_uiotombuf, explicitly return ENOBUFS. While we are
here, garbage collect the error variable since it's no longer required.
MFC after: 2 weeks
to, previously it was always broadcast to all interfaces (a bug). This is
useful when the bridge is the default gateway and vlans are used to isolate
each client, the reply is now kept private to the vlan which the client
resides.
Reported by: Jon Otterholm
Tested by: Jon Otterholm
MFC after: 3 days
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
mbuf clusters. Add a flags parameter to accept M_PKTHDR and M_EOR mbuf
chain flags. Provide compatibility macro for m_getm() calling m_getm2()
with M_PKTHDR set.
Rewrite m_uiotombuf() to use m_getm2() for mbuf allocation and do the
uiomove() in a tight loop over the mbuf chain. Add a flags parameter to
accept mbuf flags to be passed to m_getm2(). Adjust all callers for the
extra parameter.
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
