A future patch that will add a Linux compatible copy_file_range(2) syscall
needs to be able to lock the byte ranges of two files concurrently.
To do this without a risk of deadlock, a non-blocking variant of
vn_rangelock_rlock() called vn_rangelock_tryrlock() was needed.
This patch adds this, along with vn_rangelock_trywlock(), in order to
do this.
The patch also adds a couple of comments, that I hope clarify how the
algorithm used in kern_rangelock.c works.
Reviewed by: kib, asomers (previous version)
Differential Revision: https://reviews.freebsd.org/D20645
r160875 added sbdestroy() as a wrapper around sbrelease_internal to be
called from sofree(), yet the comment added in the same revision to
sofree() still mentions sbrelease_internal().
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20488
Previously, the aiotx task relied on the aio jobs in the queue to hold
a reference on the socket. However, when the last job is completed,
there is nothing left to hold a reference to the socket buffer lock
used to check if the queue is empty. In addition, if the last job on
the queue is cancelled, the task can run with no queued jobs holding a
reference to the socket buffer lock the task uses to notice the queue
is empty.
Fix these races by holding an explicit reference on the socket when
the task is queued and dropping that reference when the task
completes.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20539
The format to use depends on hardware configuration (synthesis-time),
so make it compile-time kernel option.
Extended format allows DMA engine to operate with 64-bit memory addresses.
Sponsored by: DARPA, AFRL
"pin_list" allows to specify child pins as a list of pin numbers.
Existing hint "pins" serves the same purpose but with a 32-bit wide bit
mask. One problem with that is that a controller can have more than 32
pins. One example is amdgpio. Also, a list of numbers is a little bit
more human friendly than a matching bit mask. As a side note, it seems
that in FDT pins are typically specified by their numbers as well.
This commit also adds accessors for instance variables (IVARs) that
define the child pins. My primary goal is to allow a child to be
configured programmatically rather than via hints (assuming that FDT is
not supported on a platform). Also, while a child should not care about
specific pin numbers that are allocated to it, it could be interested in
how many were actually assigned to it.
While there, I removed "flags" instance variable. It was unused.
Reviewed by: mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20459
copy the VFP registers.
arvm7 VFP uses 32 64bits fp registers (but those could be used in pairs to
make 16 128bits registers), while aarch64 uses 32 128bits fp registers, so
we have to copy the value of each register.
that replaced a pmap_invalidate_page() with a dsb(ishst) in
pmap_enter_quick_locked(). Even though this change is in principle
correct, I am seeing occasional, spurious bus errors that are only
reproducible without this pmap_invalidate_page(). (None of adding an
isb, "upgrading" the dsb to wait on loads as well as stores, or
disabling superpage mappings eliminates the bus errors.) Add an XXX
comment explaining why the pmap_invalidate_page() is being performed.
Discussed with: andrew, markj
This adds emulation for:
test r/m16, imm16
test r/m32, imm32
test r/m64, imm32 sign-extended to 64
OpenBSD guests compiled with clang 8.0.0 use TEST directly against a
Local APIC register instead of separate read via MOV followed by a
TEST against the register.
PR: 238794
Submitted by: jhb
Reported by: Jason Tubnor jason@tubnor.net
Tested by: Jason Tubnor jason@tubnor.net
Reviewed by: markj, Patrick Mooney patrick.mooney@joyent.com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20755
Use it to indicate whether the page may be safely freed following
its removal from the object. Also change vm_page_remove() to assume
that the page's object pointer is non-NULL, and have callers perform
this check instead.
This is a step towards an implementation of an atomic reference counter
for each physical page structure.
Reviewed by: alc, dougm, kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20758
"fdt" is removed from the driver module name as the driver does not
require FDT and can work very well on hints based systems.
A module dependency is added for gpiobus. Without that owc cannot
resolve symbols in gpiobus if both are loaded as kernel modules.
Finally, a driver module module version is added.
Reviewed by: imp
MFC after: 11 days
When pmap_pkru_on_remove() is called, the sva argument value was
advanced. Clear PKRU earlier when sva still specifies the start of
the region.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
In set_regs32()/fill_regs32(), we have to get/set SP and LR from/to
tf_x[13] and tf_x[14].
set_regs() and fill_regs() may be called for a 32bits process, if the process
is ptrace'd from a 64bits debugger. So, in set_regs() and fill_regs(), get
or set PC and SPSR from where the debugger expects it, from tf_x[15] and
tf_x[16].
Assert that the per-mountpoint softdep mutex is held in modified
functions that do not already have this assertion. No functional
change intended.
Reviewed by: kib, mckusick (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20741
- Remove desc_used, which is only ever written to.
- Remove a dead store to reclaimed.
- Don't recycle avail.
- Sort variables according to style(9).
These changes will make a subsequent commit easier to read.
o In iflib_tx_credits_update(), don't bother checking whether the
ift_txd_credits_update method pointer is NULL; _iflib_pre_assert()
asserts upfront that this method has been assigned and functions
like iflib_{fast_intr_rxtx,netmap_timer_adjust,txq_can_drain}()
and _task_fn_tx() were already unconditionally relying on the
method being callable.
Misaligned floating point loads and stores are already handled for AIM, but
use the DSISR to obtain the necessary data. Book-E does not have the DSISR,
so these fixups are not performed, leading to a SIGBUS on misaligned FP
loads or stores. Obtain the necessary data on the Book-E side, similar to
how is done for SPE.
MFC after: 1 week
by dropping TCP fragments with offset = 1.
In addition to dropping these fragments, add a DTrace probe to allow
for more detailed monitoring and diagnosis if required.
MFC after: 1 week
Since the only caller to vm_map_splay is vm_map_lookup_entry, move the
implementation of vm_map_splay into vm_map_lookup_helper, called by
vm_map_lookup_entry.
vm_map_lookup_entry returns the greatest entry less than or equal to a
given address, but in many cases the caller wants the least entry
greater than or equal to the address and uses the next pointer to get
to it. Provide an alternative interface to lookup,
vm_map_lookup_entry_ge, to provide the latter behavior, and let
callers use one or the other rather than having them use the next
pointer after a lookup miss to get what they really want.
In vm_map_growstack, the caller wants an entry that includes a given
address, and either the preceding or next entry depending on the value
of eflags in the first entry. Incorporate that behavior into
vm_map_lookup_helper, the function that implements all of these
lookups.
Eliminate some temporary variables used with vm_map_lookup_entry, but
inessential.
Reviewed by: markj (earlier version)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20664
DMU sync code calls taskq_dispatch() for each sublist of os_dirty_dnodes
and os_synced_dnodes. Since the number of sublists by default is equal
to number of CPUs, it will dispatch equal, potentially large, number of
tasks, waking up many CPUs to handle them, even if only one or few of
sublists actually have any work to do.
This change adds check for empty sublists to avoid this.
Fixes panic when loading ipfw.ko and if_epair.ko built with modern compiler.
Similar to arm64 and riscv, when using a modern compiler (!gcc4.2), code
generated tries to access data in the wrong location, causing kernel panic
(data storage interrupt trap) when loading if_epair and ipfw.
Issue was reproduced with kernel/module compiled using gcc8 and clang8. It
affects both ELFv1 and ELFv2 ABI environments.
PR: 232387
Submitted by: alfredo.junior_eldorado.org.br
Reported by: Mark Millard
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20461
instead of a linear array.
The multicast memberships for the inpcb structure are protected by a
non-sleepable lock, INP_WLOCK(), which needs to be dropped when
calling the underlying possibly sleeping if_ioctl() method. When using
a linear array to keep track of multicast memberships, the computed
memory location of the multicast filter may suddenly change, due to
concurrent insertion or removal of elements in the linear array. This
in turn leads to various invalid memory access issues and kernel
panics.
To avoid this problem, put all multicast memberships on a STAILQ based
list. Then the memory location of the IPv4 and IPv6 multicast filters
become fixed during their lifetime and use after free and memory leak
issues are easier to track, for example by: vmstat -m | grep multi
All list manipulation has been factored into inline functions
including some macros, to easily allow for a future hash-list
implementation, if needed.
This patch has been tested by pho@ .
Differential Revision: https://reviews.freebsd.org/D20080
Reviewed by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
The final server unref should be done by the server thread to prevent
deadlock in the client cdevpriv destructor, which cannot destroy
itself.
MFC after: 1 week
Sponsored by: Mellanox Technologies
error response after clipping the first map entry in the region to be
reserved. This creates a pair of matching entries that should have
been "simplified" back into one, or never created. This change defers
the clipping of that entry until those two vm_map_protect failure
cases have been ruled out.
Reviewed by: alc
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20711
Use the cam_ed copy of ata_params rather than malloc and freeing
memory for it. This reaches into internal bits of xpt a little, and
I'll clean that up later.
Create ata_param_fixup
Create a common fixup routine to do the canonical fixup of the
ata_param fixup. Call it from both the ATA and the ATA over SCSI
paths.
Go ahead and completely fix the ata_params before calling the veto
function. This breaks nothing that uses it in the tree since
ata_params is ignored in storvsc_ada_probe_veto which is the only
in-tree consumer.
Remove a lingering use of splbio().
The buffer must be locked by the caller. No functional change
intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Summary:
PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses runtime
code generation to generate the PLT stubs. Secure-PLT was introduced with
GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and Binutils 2.17), and is a
more secure PLT format, using a read-only linkage table, with the dynamic
linker populating a non-executable index table.
This is the libc, rtld, and kernel support only. The toolchain and build
parts will be updated separately.
Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
MFC after: 1 month
Print warnings for some bad kernel configurations (like NUMA disabled
with multiple domains). Check and report some firmware errors (like
incorrect proximity domain entries).
Differential Revision: https://reviews.freebsd.org/D20416
We now support multiple ITS blocks raising interrupts to a CPU.
Add all available CPUs to the ITS when no NUMA information is
available.
This reverts the check added in r340602, at that tim we did not
suppport multiple ITS blocks for a CPU.
Differential Revision: https://reviews.freebsd.org/D20417
Now that GICV3_IVAR_REDIST is available, GICV3_IVAR_REDIST_VADDR
is unused and can be removed. Drop the define and add a comment.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20454
had been done years ago. I did. All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm. Now separate LINT-V5 and LINT-V7 configs are
generated and built.
There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file. That file now contains only
the bits that are common to v5 and v7.
The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
Port the code to block on turnstile instead of yielding, to lock-less
delayed invalidation. The yield might cause tight loop due to priority
inversion.
Since it is impossible to avoid race between block and wake-up, arm
1-tick callout to wakeup when thread blocks itself.
Reported and tested by: mjg
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Differential revision: https://reviews.freebsd.org/D20636
into existing files for sugid processes.
Despite using real user id pronounces the intent, it actually breaks
suid coredumps, while not making any difference for non-sugid
processes. The reason for the breakage is that non-existent core file
is created with the effective uid (unless weird hacks like SUIDDIR are
configured).
Then, if user enabled kern.sugid_coredump, core dumping should not
overwrite core files owned by effective uid, but we cannot pretend to
use real uid for dumping.
PR: 68905
admbugs: 358
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
perform a TLB invalidation. A barrier suffices. (See r343876.)
Add a comment to pmap_enter_quick_locked() in order to highlight the
fact that it does not replace valid mappings.
Correct a typo in one of pmap_enter()'s comments.
MFC after: 1 week
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
MFC after: 2 weeks
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12725
Until r349278, bhyve presented a seg_max to the guest that was too large.
Detect this case and clamp it to the virtqueue size. Otherwise, we would
fail the "too many segments to enqueue" assertion in virtqueue_enqueue().
I hit this by running a guest with a MAXPHYS of 256 KB.
Reviewed by: bryanv cem
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20703
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
MFC after: 2 weeks
When some type has 0 elements, saved_individual_element_index was set
to -1 on second type bump, since individual_element_index was not
restored after the first. To me it looks easier just to increment
saved_individual_element_index separately than think when to save it.
MFC after: 2 weeks
Define __daddr_t in _types.h and use it in filio.h
Reported by: ian, bde
Reviewed by: ian, imp, cem
MFC after: 2 weeks
MFC-With: 349233
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20715
- Add rcu list functions.
- Make rcu hlist's foreach macro use rcu calls instead of the non-rcu macro.
- Bump FreeBSD version so we have a checkpoint for the vboxvideo drm driver.
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
Differential Revision: D20719
pwm(9), but also maintains the historical sysctl config interface for
compatiblity with existing apps. The two config systems are not compatible
with each other; if you use both interfaces to change configurations you're
likely to end up with incorrect output or none at all.
upcoming functional changes.
Add an ofw_compat_data table for probing compat strings, and use it to add
PNP data. Remove some stray semicolons at the end of macro definitions,
and add a PWM_LOCK_ASSERT macro to round out the usual suite. Move the
device_t and driver_methods structs to the end of the file. Tweak comments.
Previously nandsim_chip_status returned EINVAL iff both of user-provided
chip->ctrl_num and chip->num were out of bounds. If only one failed the
bounds check arbitrary memory would be read and returned.
The NAND framework is not built by default, nandsim is not intended for
production use (it is a simulator), and the nandsim device has root-only
permissions.
admbugs: 827
Reported by: Daniel Hodson of elttam
MFC after: 3 days
Security: kernel information leak or DoS
Sponsored by: The FreeBSD Foundation
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.
# ipfw add deny log tcp from any to any tcpmss 0-500
Reviewed by: melifaro,bcr
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
If we take the slow path for forwarding we should still tell our
firewalls (hooked through pfil(9)) that we're forwarding. Pass the
ip_output() flags to ip_output_pfil() so it can set the PFIL_FWD flag
when we're forwarding.
MFC after: 1 week
Sponsored by: Axiado
VOP_READ and VOP_WRITE take the seqcount in blocks in a 16-bit field.
However, fcntl allows you to set the seqcount in bytes to any nonnegative
31-bit value. The result can be a 16-bit overflow, which will be
sign-extended in functions like ffs_read. Fix this by sanitizing the
argument in kern_fcntl. As a matter of policy, limit to IO_SEQMAX rather
than INT16_MAX.
Also, fifos have overloaded the f_seqcount field for a completely different
purpose ever since r238936. Formalize that by using a union type.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20710
Do not allocate temporary buffer for attributes we are going to return
as-is, just make sure to NUL-terminate them. Do not zero temporary 64KB
buffer for CDAI_TYPE_SCSI_DEVID, XPT tells us how much data it filled
and there are also length fields inside the returned data also.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
A new macro PROT_MAX() alters a protection value so it can be OR'd with
a regular protection value to specify the maximum permissions. If
present, these flags specify the maximum permissions.
While these flags are non-portable, they can be used in portable code
with simple ifdefs to expand PROT_MAX() to 0.
This change allows (e.g.) a region that must be writable during run-time
linking or JIT code generation to be made permanently read+execute after
writes are complete. This complements W^X protections allowing more
precise control by the programmer.
This change alters mprotect argument checking and returns an error when
unhandled protection flags are set. This differs from POSIX (in that
POSIX only specifies an error), but is the documented behavior on Linux
and more closely matches historical mmap behavior.
In addition to explicit setting of the maximum permissions, an
experimental sysctl vm.imply_prot_max causes mmap to assume that the
initial permissions requested should be the maximum when the sysctl is
set to 1. PROT_NONE mappings are excluded from this for compatibility
with rtld and other consumers that use such mappings to reserve
address space before mapping contents into part of the reservation. A
final version this is expected to provide per-binary and per-process
opt-in/out options and this sysctl will go away in its current form.
As such it is undocumented.
Reviewed by: emaste, kib (prior version), markj
Additional suggestions from: alc
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18880
This ioctl exposes VOP_BMAP information to userland. It can be used by
programs like fragmentation analyzers and optimized cp implementations. But
I'm using it to test fusefs's VOP_BMAP implementation. The "2" in the name
distinguishes it from the similar but incompatible FIBMAP ioctls in NetBSD
and Linux. FIOBMAP2 differs from FIBMAP in that it uses a 64-bit block
number instead of 32-bit, and it also returns runp and runb.
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20705
wakeup_one() and underlying sleepq_signal() spend additional time trying
to be fair, waking thread with highest priority, sleeping longest time.
But in case of taskqueue there are many absolutely identical threads, and
any fairness between them is quite pointless. It makes even worse, since
round-robin wakeups not only make previous CPU affinity in scheduler quite
useless, but also hide from user chance to see CPU bottlenecks, when
sequential workload with one request at a time looks evenly distributed
between multiple threads.
This change adds new SLEEPQ_UNFAIR flag to sleepq_signal(), making it wakeup
thread that went to sleep last, but no longer in context switch (to avoid
immediate spinning on the thread lock). On top of that new wakeup_any()
function is added, equivalent to wakeup_one(), but setting the flag.
On top of that taskqueue(9) is switchied to wakeup_any() to wakeup its
threads.
As result, on 72-core Xeon v4 machine sequential ZFS write to 12 ZVOLs
with 16KB block size spend 34% less time in wakeup_any() and descendants
then it was spending in wakeup_one(), and total write throughput increased
by ~10% with the same as before CPU usage.
Reviewed by: markj, mmacy
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D20669
When it comes to megabytes of text, difference between sbuf_printf() and
sbuf_cat() becomes substantial.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
in response to SACKs. The default behavior is unchanged; however, the limit
can be activated by changing the new net.inet.tcp.rack.split_limit sysctl.
Submitted by: Peter Lei <peterlei@netflix.com>
Reported by: jtl
Reviewed by: lstewart (earlier version)
Security: CVE-2019-5599
at runtime. This change removes a dependency on a barrel shifter pass
before branch resolution, while reducing the instruction stream size
by 9 bytes on amd64.
MFC after: 3 days
translation units with differing capabilities
From the author via Bugzilla:
---
When an attempt is made to passthrough a PCI device to a bhyve VM
(causing initialisation of IOMMU) on certain Intel chipsets using
VT-d the PCI bus stops working entirely. This issue occurs on the
E3-1275 v5 processor on C236 chipset and has also been encountered
by others on the forums with different hardware in the Skylake
series.
The chipset has two VT-d translation units. The issue is caused by
an attempt to use the VT-d device-IOTLB capability that is
supported by only the first unit for devices attached to the
second unit which lacks that capability. Only the capabilities of
the first unit are checked and are assumed to be the same for all
units.
Attached is a patch to rectify this issue by determining which
unit is responsible for the device being added to a domain and
then checking that unit's device-IOTLB capability. In addition to
this a few fixes have been made to other instances where the first
unit's capabilities are assumed for all units for domains they
share. In these cases a mutual set of capabilities is determined.
The patch should hopefully fix any bugs for current/future
hardware with multiple translation units supporting different
capabilities.
A description is on the forums at
https://forums.freebsd.org/threads/pci-passthrough-bhyve-usb-xhci.65235
The thread includes observations by other users of the bug
occurring, and description as well as confirmation of the fix.
I'd also like to thank Ordoban for their help.
---
Personally tested on a Skylake laptop, Skylake Xeon server, and
a Xeon-D-1541, passing through XHCI and NVMe functions. Passthru
is hit-or-miss to the point of being unusable without this
patch.
PR: 229852
Submitted by: callum@aitchison.org
MFC after: 1 week
On large systems those sysctls may generate megabytes of output. Before
this change sbuf(9) code was resizing buffer by 4KB each time many times,
generating tons of TLB shootdowns. Unfortunately in this case existing
sbuf_new_for_sysctl() mechanism, supposed to help with this issue, is not
applicable, since all the sbuf writes are done in different kernel thread.
This change improves situation in two ways:
- on first sysctl call, not providing any output buffer, it sets special
sbuf drain function, just counting the data and so not needing big buffer;
- on second sysctl call it uses as initial buffer size value saved on
previous call, so that in most cases there will be no reallocation, unless
GEOM topology changed significantly.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
In r349154, random device reads of size < 16 bytes (AES block size) were
accidentally broken to loop forever. Correct the loop condition for small
reads.
Reported by: pho
Reviewed by: delphij
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D20686
In all supported (and most unsupported) FreeBSD versions the appropriate
header for Capsicum is sys/capsicum.h. Software including sys/capability.h
is most likely looking for Linux capabilities based on the withdrawn
POSIX.1e draft.
This header was previously removed in r334929 and r340156, but reverted
each time due to ports failures. These issues have now (broadly) been
addressed.
PR: 228878 [exp-run]
Submitted by: eadler (r334929)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This adds ACPI device path on devinfo(8) output and
show value of _UPC(usb port capabilities), _PLD (physical location of device)
when hw.usb.debug >= 1 .
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D20630
Add experimental feature to increase concurrency in Fortuna. As this
diverges slightly from canonical Fortuna, and due to the security
sensitivity of random(4), it is off by default. To enable it, set the
tunable kern.random.fortuna.concurrent_read="1". The rest of this commit
message describes the behavior when enabled.
Readers continue to update shared Fortuna state under global mutex, as they
do in the status quo implementation of the algorithm, but shift the actual
PRF generation out from under the global lock. This massively reduces the
CPU time readers spend holding the global lock, allowing for increased
concurrency on SMP systems and less bullying of the harvestq kthread.
It is somewhat of a deviation from FS&K. I think the primary difference is
that the specific sequence of AES keys will differ if READ_RANDOM_UIO is
accessed concurrently (as the 2nd thread to take the mutex will no longer
receive a key derived from rekeying the first thread). However, I believe
the goals of rekeying AES are maintained: trivially, we continue to rekey
every 1MB for the statistical property; and each consumer gets a
forward-secret, independent AES key for their PRF.
Since Chacha doesn't need to rekey for sequences of any length, this change
makes no difference to the sequence of Chacha keys and PRF generated when
Chacha is used in place of AES.
On a GENERIC 4-thread VM (so, INVARIANTS/WITNESS, numbers not necessarily
representative), 3x concurrent AES performance jumped from ~55 MiB/s per
thread to ~197 MB/s per thread. Concurrent Chacha20 at 3 threads went from
roughly ~113 MB/s per thread to ~430 MB/s per thread.
Prior to this change, the system was extremely unresponsive with 3-4
concurrent random readers; each thread had high variance in latency and
throughput, depending on who got lucky and won the lock. "rand_harvestq"
thread CPU use was high (double digits), seemingly due to spinning on the
global lock.
After the change, concurrent random readers and the system in general are
much more responsive, and rand_harvestq CPU use dropped to basically zero.
Tests are added to the devrandom suite to ensure the uint128_add64 primitive
utilized by unlocked read functions to specification.
Reviewed by: markm
Approved by: secteam(delphij)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20313
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
names. I.e., everything related to pwm now goes in /dev/pwm. This will
make it easier for userland tools to turn an unqualified name into a fully
qualified pathname, whether it's the base pwmcX.Y name or a label name.
At a basic level, remove assumptions about the underlying algorithm (such as
output block size and reseeding requirements) from the algorithm-independent
logic in randomdev.c. Chacha20 does not have many of the restrictions that
AES-ICM does as a PRF (Pseudo-Random Function), because it has a cipher
block size of 512 bits. The motivation is that by generalizing the API,
Chacha is not penalized by the limitations of AES.
In READ_RANDOM_UIO, first attempt to NOWAIT allocate a large enough buffer
for the entire user request, or the maximal input we'll accept between
signal checking, whichever is smaller. The idea is that the implementation
of any randomdev algorithm is then free to divide up large requests in
whatever fashion it sees fit.
As part of this, two responsibilities from the "algorithm-generic" randomdev
code are pushed down into the Fortuna ra_read implementation (and any other
future or out-of-tree ra_read implementations):
1. If an algorithm needs to rekey every N bytes, it is responsible for
handling that in ra_read(). (I.e., Fortuna's 1MB rekey interval for AES
block generation.)
2. If an algorithm uses a block cipher that doesn't tolerate partial-block
requests (again, e.g., AES), it is also responsible for handling that in
ra_read().
Several APIs are changed from u_int buffer length to the more canonical
size_t. Several APIs are changed from taking a blockcount to a bytecount,
to permit PRFs like Chacha20 to directly generate quantities of output that
are not multiples of RANDOM_BLOCKSIZE (AES block size).
The Fortuna algorithm is changed to NOT rekey every 1MiB when in Chacha20
mode (kern.random.use_chacha20_cipher="1"). This is explicitly supported by
the math in FS&K §9.4 (Ferguson, Schneier, and Kohno; "Cryptography
Engineering"), as well as by their conclusion: "If we had a block cipher
with a 256-bit [or greater] block size, then the collisions would not
have been an issue at all."
For now, continue to break up reads into PAGE_SIZE chunks, as they were
before. So, no functional change, mostly.
Reviewed by: markm
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D20312
Add some basic regression tests to verify behavior of both uint128
implementations at typical boundary conditions, to run on all architectures.
Test uint128 increment behavior of Chacha in keystream mode, as used by
'kern.random.use_chacha20_cipher=1' (r344913) to verify assumptions at edge
cases. These assumptions are critical to the safety of using Chacha as a
PRF in Fortuna (as implemented).
(Chacha's use in arc4random is safe regardless of these tests, as it is
limited to far less than 4 billion blocks of output in that API.)
Reviewed by: markm
Approved by: secteam(gordon)
Differential Revision: https://reviews.freebsd.org/D20392
Implement wiring changes on superpage mappings. Previously, a superpage
mapping was unconditionally demoted by pmap_unwire(), even if the wiring
change applied to the entire superpage mapping.
Rewrite a comment to use the arm64 names for bits in a page table entry.
Previously, the bits were referred to by their x86 names.
Use atomic_"op"_64() instead of atomic_"op"_long() to update a page table
entry in order to match the prevailing style in this file.
MFC after: 10 days
Previously, there was a pwmc instance for each instance of pwm hardware
regardless of how many pwm channels that hardware supported. Now there
will be a pwmc instance for each channel when the hardware supports
multiple channels. With a separate instance for each channel, we can have
"named channels" in userland by making devfs alias entries in /dev/pwm.
These changes add support for ivars to pwmbus, and use an ivar to track the
channel number for each child. It also adds support for hinted children.
In pwmc, the driver checks for a label hint, and if present, it's used to
create an alias for the cdev in /dev/pwm. It's not anticipated that hints
will be heavily used, but it's easy to do and allows quick ad-hoc creation
of named channels from userland by using kenv to create hint.pwmc.N.label=
hints. Upcoming changes will add FDT support, and most labels will
probably be specified that way.
Implement protection changes on superpage mappings. Previously, a superpage
mapping was unconditionally demoted by pmap_protect(), even if the
protection change applied to the entire superpage mapping.
Precompute the bit mask describing the protection changes rather than
recomputing it for every page table entry that is changed.
Skip page table entries that already have the requested protection changes
in place.
Reviewed by: andrew, kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D20657
is nothing left in the file that related to pwmbus at all. It just contains
prototypes for the functions implemented in dev/pwm.ofw_pwm.c, so name it
accordingly and fix the include protect wrappers to match.
A new pwmbus.h will be coming along in a future commit.
The natural place to look for them based on how other SoCs are organized
would be sys/modules/ti, but that's already taken. Drop a clue into
modules/ti/Makefile directing people to modules/arm_ti if they're looking
for ARM modules.
The pwm and pwmbus interfaces were nearly identical, this merges them into a
single pwmbus interface. The pwmbus driver now implements the pwmbus
interface by simply passing all calls through to its parent (the hardware
driver). The channel_count method moves from pwm to pwmbus, and the
get_bus method is deleted (just no longer needed).
The net effect is that the interface for doing pwm stuff is now the same
regardless of whether you're a child of pwmbus, or some random driver
elsewhere in the hierarchy that is bypassing the pwmbus layer and is talking
directly to the hardware driver via cross-hierarchy connections established
using fdt data.
The pwmc driver is now a child of pwmbus, instead of being its sibling
(that's why the get_bus method is no longer needed; pwmc now gets the
device_t of the bus using device_get_parent()).
pollution that was cleaned up recently, and this file got missed in the
cleanup because it's not attached to the build unless you specifically
request this device in a custom kernel config.
ioctl definitions and related datatypes that allow userland control of pwm
hardware via the pwmc device. The new name and location better reflects its
assocation with a single device driver.
it only called vm_page_dirty() on the first of the superpage's constituent
4KB pages. This revision corrects that error, calling vm_page_dirty() on
all of superpage's constituent 4KB pages.
MFC after: 3 days
driver is compiled into the kernel but pwmbus will be loaded as a module
when needed (and because of that, pwmbus_attach_bus() is going away in
the near future). Instead, just directly do what that function did:
register the fdt xfef handle, and attach the pwmbus.
resources if they got allocated (because detach() gets called from attach()
to handle various failures), and delete the pwmbus child if it got created.
structs with placeholders (in the latter case, IFLIB_MAX_TX_BYTES
etc. are also only ever used for these write-only members if at all,
so both these macros and members can just go). Using these spares
may render it possible to merge certain iflib(9) fixes to stable/12.
Otherwise, changes extending struct if_irq or struct if_shared_ctx
in any way would break KBI as instances of these are allocated by
the driver front-ends (by contrast, struct if_pkt_info as well as
struct if_softc_ctx instances are provided by iflib(9) and, thus,
may grow at least at the end without breaking KBI).
- Make the pvi_name in struct pci_vendor_info const char * as device
identifiers in hardware lookup tables aren't to be expected to ever
change at runtime.
- Similarly, make the pci_vendor_info_t of struct if_shared_ctx which
is used to point to the struct pci_vendor_info arrays provided by
the driver front-ends const.
- Remove the ETH_ADDR_LEN macro from iflib.h; this was duplicating
ETHER_ADDR_LEN of <net/ethernet.h> with iflib(9) actually only
consuming the latter macro.
- Make the name argument of iflib_io_tqg_attach(9) const, matching
the taskqgroup_attach_cpu(9) this function wraps as well as e. g.
iflib_config_gtask_init(9).
- Remove the orphaned iflib_qset_lock_get() prototype.
- Remove some extraneous empty lines.
the lost information in new comments.
Reported by: alc
Reviewed by: alc
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20632
I just happenned to have 3rd party code using 'var' as the output variable
which drew my attention to this. variables defined inside macros should be
prefixed to avoid getting shadowed varable wanrings from clang.
For busy ARC situation when arc_size close to arc_c is desired. But
then it is quite likely that aggsum_compare(&arc_size, arc_c) will need
to flush per-CPU buckets to find exact comparison result. Doing that
often in a hot path penalizes whole idea of aggsum usage there, since it
replaces few simple atomic additions with dozens of lock acquisitions.
Replacing aggsum_compare() with aggsum_upper_bound() in code increasing
arc_p when ARC is growing (arc_size < arc_c) according to PMC profiles
allows to save ~5% of CPU time in aggsum code during sequential write
to 12 ZVOLs with 16KB block size on large dual-socket system.
I suppose there some minor arc_p behavior change due to lower precision
of the new code, but I don't think it is a big deal, since it should
affect only very small window in time (aggsum buckets are flushed every
second) and in ARC size (buckets are limited to 10 average ARC blocks
per CPU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
It is too generous to collect in production debug traces that can only
be read with kernel debugger. Illumos includes special code in their
mdb debugger to read it, we don't.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
not performed directly by the pmap. Instead, they are performed by
vm_page_free_pages_toq(). (This is the same approach that we use on x86.)
Reviewed by: kib, markj
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D20627
iterate over consecutive vm_map entries, and that can easily just
'remember' the prev value instead of looking it up.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20628
Normally td_runtime is updated on context switch, but there are some kernel
threads that due to high absolute priority may run for many seconds without
context switches (yes, that is bad, but that is true), which means their
td_runtime was not updated all that time, that made them invisible for top
other then as some general CPU usage.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
for giving cred to a map entry backed by an object, and use them
instead of the code duplicated inline now.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20370
part of ciss_detach. It's a left-over debug that isn't needed and also
discloses a kernel address. Only root could provoke as part of a
devctl or kldunload.
Submitted by: Fuqian Huang
MFC After: 1 week
Memory copy is too heavy operation to do under the congested lock.
Moving it out reduces congestion by many times to almost invisible.
Since the original zio removed from the queue, and the child zio is
not executed yet, I don't see why would the copy need protection.
My guess it just remained like this from the time when lock was not
dropped here, which was added later to fix lock ordering issue.
Multi-threaded sequential write tests with both HDD and SSD pools
with ZVOL block sizes of 4KB, 16KB, 64KB and 128KB all show major
reduction of lock congestion, saving from 15% to 35% of CPU time
and increasing throughput from 10% to 40%.
Reviewed by: ahrens, behlendorf, ryao
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
demotion failure. Otherwise, some callers to pmap_demote_l2_locked(), such
as pmap_protect(), may leave an incorrect mapping in place on a demotion
failure.
Change pmap_demote_l2_locked() so that it handles addresses that are not
superpage aligned. Some callers to pmap_demote_l2_locked(), such as
pmap_protect(), may not pass a superpage aligned address.
Change pmap_enter_l2() so that it correctly calls vm_page_free_pages_toq().
The arm64 pmap is updating the count of wired pages when freeing page table
pages, so pmap_enter_l2() should pass false to vm_page_free_pages_toq().
Optimize TLB invalidation in pmap_remove_l2().
Reviewed by: kib, markj (an earlier version)
Discussed with: andrew
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20585
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
between each byte either sent or received). However, most transitions
actually complete in 2-3 microseconds.
By polling the status register with a delay of 4us with exponential
backoff, the performance of most IPMI operations is significantly
improved:
- A BMC update on a Supermicro x9 or x11 motherboard goes from ~1 hour
to ~6-8 minutes.
- An ipmitool sensor list time improves by a factor of 4.
Testing showed no significant improvements on a modern server by using
a lower delay.
The changes should also generally reduce the total amount of CPU or
I/O bandwidth used for a given IPMI operation.
Submitted by: Loic Prylli <lprylli@netflix.com>
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20527
necessary support functions in cpu-v6.h, and it may be that the only armv6
platform we support (RPi, the bcm2835 SOC) is incapable of supporting hwpmc.
Reported by: dim@
r348783 changed the behavior of the kernel mappings and broke booting on G5.
- Split the kernel mapping logic out so that the case where we are
running from the wrong memory space is handled using identity
mappings, and the case where we are not using a DMAP is handled by
forcibly mapping the kernel into the dmap range as intended by
r348783.
Reported by: Mikael Urankar
Reviewed by: luporl
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D20608
PR/203585 this appears to have been broken by r235959, which predates
the ipfilter 5.1.2 import into FreeBSD.
The IPv6 checksum calculation is incorrect. To resolve this we call
in6_cksum() to do the the heavy lifting for us, through a new function
ipf_pcksum6(). Should we need to revisit this area again, a DTrace probe
is added to aid with future debugging.
PR: 203275, 203585
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20583
assumed the pfil hook registration performed in ipf_modload() would take
care of this. However ipf_modload() is only called when the ipl kld is
loaded or when ipfilter is first called when it is statically linked
into the kernel at build time.
Prior to this, even though r302298 has been in the tree for a while, it
has never been used. So, r302298 in reality begins now.
PR: 212000
Reported by: ahsanb@
MFC after: 1 month
This fixes META_MODE rebuilding since it assumes that it this is
a non-consistent build command. These are always unencoded consistently
though and do not need to use the .OODATE/$? mechanism.
MFC after: 2 weeks
Reported by: npn
Sponsored by: DellEMC
This was lost in r335910 for some reason.
This also fixes a META_MODE rebuild issue in some modules [1].
MFC after: 2 weeks
Reported by: npn [1]
Sponsored by: DellEMC
New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI
Reviewed by: cem
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20555
length to the difference of the two offsets that define the gap, to
avoid overflow, rather that adding the length to an offset and
comparing that to another offset.
This addresses an overflow issue reported by Peter Holm on i386.
Reported by: pho
Tested by: pho
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20594
When building a kernel supporting PSERIES but not POWERNV,
the compiler would complain about an error variable being
possibly used before being initialized.
In practice, however, this should never happen. In any case, it
is now initialized to an error value.
Before this change, OFW initrd (as md) handling code was simulating an ofwbus
device. But as there isn't really a Device Tree (DT) node representing OFW
initrd (it is specified in 2 properties under /chosen), its driver was in fact
stealing other driver's DT node. This was noticed after MD_ROOT_MEM became
default and QEMU's USB keyboard stopped working under VNC.
This change consists in simplifying the process of detection and mapping of
initrd memory, turning it into a simple startup step, instead of trying to
simulate a device.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20553
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
This change rights that comparison.
Reported by: pho
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20595
detection pins to the Marvell Xenon SDHCI controller.
These features are enable by 'vqmmc-supply' and 'cd-gpios' properties in the
DTS.
This fixes the SD Card detection on espressobin.
Sponsored by: Rubicon Communications, LLC (Netgate)
children of every entry on the search path as part of updating values of
the max_free field. By comparing the max_free values of an entry and its
child on the search path, the code can avoid accessing the child off the
path in cases where the max_free value decreases along the path.
Specifically, this patch changes splay_split so that the max_free field
of every entry on the search path is replaced, temporarily, by the
max_free field from its child not on the search path or, if the child
in that direction is NULL, then a difference between start and end
values of two pointers already available in the split code, without
following any next or prev pointers. However, to find that max_free
value does not require looking toward that other child if either the
child on the search path has a lower max_free value, or the current max_free
value is zero, because in either case we know that the value of max_free for
the other child is the value we already have. So, the changes to
vm_entry_splay_split make sure that we know all the off-search-path entries
we will need to complete the splay, without looking at all of them. There is
an exception at the bottom of the search path where we cannot rely on the
max_free value in the direction of the NULL pointer that ends the search,
because of the behavior of entry-clipping code.
The corresponding change to vm_splay_entry_merge makes it simpler, since it's
just reversing pointers and updating running maxima.
In a test intended to exercise vigorously the vm_map implementation, the
effect of this change was to reduce the data cache miss rate by 10-14% and
the running time by 5-7%.
Tested by: pho
Reviewed by: alc
Approved by: kib (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19826
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
for both the lower and upper bound modifications. Change the error returned
to ENOMEM. Rename the parameter size to len and make size a local variable
that stores the value of len after it has been modified.
This addresses concerns expressed by Bruce Evans after r348843.
Reported by: brde@optusnet.com.au
Reviewed by: kib, markj (mentors)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20592
This allows SDIO (through CAM) to attach to an upstream, e.g.,
..
sdhci_bcm0 pnpinfo name=mmc@7e300000 compat=brcm,bcm2835-mmc
sdiob0
..
Without this, upon trying to load sdio, we would panic with
"bus_add_child is not implemented".
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
These algorithms are deprecated algorithms that will have no in-kernel
consumers in FreeBSD 13. Specifically, deprecate the following
algorithms:
- ARC4
- Blowfish
- CAST128
- DES
- 3DES
- MD5-HMAC
- Skipjack
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20554