Commit Graph

22 Commits

Author SHA1 Message Date
Warner Losh
58c13f9b7a Add new pci attachment for pcic. This supports pci cards as well as
card bus bridges.

We now always use pci interrupts for pci cards.  This will allow us to
more easily configure things.  You must change your IRQ lines in
/etc/pccard.conf to match what we've probed.  I'm not sure the right
way to deal with this right now.

Development of pci pcmcia has been funded by Monzoon Networks AG.  I
am grateful for their generosity.
2001-06-04 06:49:46 +00:00
Warner Losh
f20688d55c #defines for pci way interrupt routing. 2001-06-04 03:36:22 +00:00
Warner Losh
ee327e92e1 Move to using the common device list.
Move to table driven probing of these devices since we have such a long list.
2001-05-25 19:22:36 +00:00
Warner Losh
e0e34f291e Add recognition for Toshiba ToPIC-100.
Submitted by: Shimodaira Toshio <tshimod1@ym.nsw.co.jp> in [bsd-nomads:15589]
2001-05-23 04:37:00 +00:00
Warner Losh
bccfae2270 Add some additional register definitions for some work I have in progress. 2001-05-08 02:06:03 +00:00
Warner Losh
82d3fe450d When booting, turn on the 3E0 compatibility address for ricoh cardbus
parts.  This is based on the newcard code that turns it off :-).  We
can now reboot after NEWCARD or Windows and have OLDCARD work.  Add
support for the RL5C466 while I'm at it.

Treat TI1031 the same as the CLPD6832.  It doesn't work yet, but sucks
less than it did before.

Also add a few #defines for other changes in the pipe.
2001-04-17 23:15:00 +00:00
Warner Losh
a9304a4eb5 Fix minor typo in comment. 112x -> 12xx 2001-04-11 22:49:00 +00:00
Warner Losh
a5eccf28a8 Add device id for the OZ Micro 6832. I didn't try to init it like the
Cirrus Logic parts that end in 6832, but maybe some machines will need
that in the future.
2001-01-02 21:42:48 +00:00
Warner Losh
a7d5d6a892 Add TI-1031 id. It doesn't work yet, but it is nice to have it.
These were on cards that were pci pccard (not cardbus) bridges that
lived in SparcUltras that picked up on ebay.
2000-08-29 04:40:17 +00:00
Peter Wemm
0a8e3ce8a5 Make this compile without depending on the FreeBSD 2.2 compatability
defines.
2000-05-28 16:31:35 +00:00
Warner Losh
748fdadaad Add TI-1211 chipset from datasheet info 2000-04-20 03:16:49 +00:00
Warner Losh
6ea2fbe9be More fully initialize cardbus bridges. We now call the new generic
cardbus bridge init routine for all cardbuses.  This routine attempts
to compensate for BIOSes that do not setup the cardbus bridge into
legacy mode.  Since this is becoming more common, and cardbus pci
cards have appeared on the market, this makes sense.

Do some TI113x specific initialization.  This came in as part of the
patch.  Report TI1[1234]XX specific config registers protected by
bootverbose.

Minor code cleanup while I'm here.  I've also removed the unused code
present in the original patches, and cleaned it up slightly in places
as well.

The original patches supported more than one card, but these patches
support just one.  We should likely revisit this in the future.

This makes the Compaq card that Walnut Creek CD purchased for me work
in my bouncer box.

This is a MFC candidate.  However, I'd like to get some airtime on
these patches on as many laptops as possible before doing the MFC.  It
does change things somewhat.  In theory, apart from the minor TI
tweaks, this shouldn't change anything if the bridge is in legacy mode
already.

Submitted by: sanpei@sanpei.org (MIHIRA Yoshiro)
2000-03-25 20:29:55 +00:00
Bill Fumerola
4eb47ecfab Fill in the blanks for some of the Texas Instruments cardbus controllers.
Obtained from:	NetBSD (syssrc/sys/dev/pci/pcidevs)
1999-12-31 07:22:24 +00:00
Bill Fumerola
f88e599fcb Copy Texas Instruments cardbus controllers from pcisupport.c, the pcisupport.c
probes are at the 'chip' level and will get overridden by pcic_p if it is
compiled in. It's still nice to get the better probe message if it's not...

Requested by:	imp
1999-12-29 13:33:37 +00:00
Eivind Eklund
e9f0f7d4ad Add the PCI id for the TI PCI-1251B PCI-CardBus bridge.
Submitted by:   Martin Blapp <mb@imp.ch>
1999-11-28 13:37:35 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Nate Williams
4be290acd4 - Added PCI identification support for the TI1251 PCI/CardBus bridge.
With this addition my ThinkPad 600E works with the stock FreeBSD
  PCMCIA code.
1999-05-02 05:53:50 +00:00
Nick Sayer
db49f041ae Import PCI pccard bridge chip probing from PAO. Hopeful prelude for
broadening chipset support in -current.

Reviewed by:	joerg
Obtained from:	PAO
1999-04-01 15:28:10 +00:00
Torsten Blum
de6f543955 Identify the TI1250 PCMCIA/CardBus bridge. It seems that it's compatible
to the TI1131. At least it works in my Compaq Armada 7800.
1999-01-25 12:59:31 +00:00
Nate Williams
a9b9e46550 - Support for multiple PD6832 controllers. Each found 6832 is assigned
and initializes the next two ports in order starting at 03e0.  This
  also patches pcic_p.h to reduce the I/O ports mapped from 4 to 2.

Submitted by:	Ted Faber <faber@ISI.EDU>
1998-01-20 21:11:03 +00:00
Nate Williams
12defa4078 - Bring in code removed from /sys/pccard/pcic.c, including DEVICE IDs, and
more bootverbose code.
- Style nits.

No significant functional changes.
1997-12-02 22:13:59 +00:00
Nate Williams
030713d715 - Framework for PCI/CardBus controllers running in PCMCIA emulation
mode.  Currently, the only supported controller is the Cirrus Logic
  PD6832, but others can be supported with docs on them.

Submitted by:	Ted Faber <faber@ISI.EDU>
1997-12-02 21:26:41 +00:00