Commit Graph

83 Commits

Author SHA1 Message Date
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
d4c319bf3b - Allow multiple (external) PHYs with Am79C97{2,6}, which actually
only support external PHYs (besides not connectable internal ones
  which respond at the usual addresses, but which don't hurt if we
  let them show up) and don't wedge when isolating PHYs. Actually,
  this change special cases limiting PHYs to Am79C97{3,5,8}, for
  which this driver doesn't implement swiching between the internal
  and external PHYs, yet, and Am79C971, where isolating the external
  PHY (at least in case it's a DP83840A) wedges the chip. Together
  with sys/dev/mii/acphy.c rev. 1.21 this adds support for the
  100baseFX port of AT-2700 series adaptors, which use two AC101,
  one for the copper and one for the fibre port (there might be
  variants which only use one PHY though).
- Fix a bug in the previous revision that prevented the address of
  the used (external) PHY to be actually recorded.
- Don't bother to set if_mtu to ETHERMTU, ether_ifattach() does that.

MFC after:	1 week
2007-01-13 17:18:44 +00:00
Marius Strobl
3961cd0d76 - Clear the PCN_MISC_ASEL bit so the media port can be actually set
via the PCN_CSR_MODE register. Along with sys/dev/mii/nsphy.c 1.26
  this fixes the case of certain Am79c971-based HP cards and on-board
  ones in IBM machines reporting link but not actually passing any
  traffic. [1]
- Add support for the internal 10baseT PHY, which actually is used on
  at least said HP cards (together with an external DP83840A in a
  multiple PHYs configuration). With cards that don't make use of this
  internal PHY it'll also show up in FreeBSD but not cause any harm.
  This is still missing support for multiple PHYs configuration using
  the internal 100baseTX and/or HomePNA PHYs together with external
  PHYs or multiple external PHYs though.
- In pcn_ifmedia_upd() call pcn_reset() as otherwise the Am79C971 of
  at least said HP cards can wedge when switching from the internal
  10baseT PHY to the external PHY. This means that we need to also
  initialize and possibly start the chip again in pcn_ifmedia_upd(),
  which isn't that bad though as for setting the media port the chip
  has to be powered down or stopped anyway and unlike documented
  doesn't take effect until the next initialization.

PR:		27995, 25959, 72966 (likely) [1]
MFC after:	2 weeks
2006-11-28 01:33:17 +00:00
Marius Strobl
2d58d44651 - Don't bother to include IDs of PCnet chips which are not supported
by this driver and largely are not even PCI devices in pcn_chipid.
- Use device_printf(9)/if_printf(9) rather than implementing their
  functionality with printf(9).
- Sprinkle some const.
2006-11-07 19:44:41 +00:00
Marius Strobl
8fcd3fd881 Replace references to lnc(4) with references to le(4) (so far the notes
still apply to le(4)) now that lnc(4) is removed and le(4) is going to
replace it.
2006-05-15 20:07:24 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Ruslan Ermilov
e019908ee7 In detach method, move if_free() after bus_teardown_intr(). 2005-10-13 21:11:20 +00:00
Ruslan Ermilov
3badacee8c Fix "struct ifnet" leaks when attach() fails in the middle, e.g.
when mii_phy_probe() or bus_setup_intr() fails.  For drivers that
call their detach() in this case, call if_free() there to cover
this case too.
2005-09-16 11:11:51 +00:00
Warner Losh
c3b6bc1a2a Fix obsolete comment.
MFC After: 2 days
2005-08-29 16:48:28 +00:00
John Baldwin
f512b596a8 Use callout_init_mtx() to simplify the stats callout.
MFC after:	3 days
2005-08-17 17:44:58 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
John Baldwin
718e387c34 Fix up the locking in pcn(4) and mark it MPSAFE.
- Add locked versions of the init() and start() methods.
- Use callout_*() rather than timeout().
- Make the driver lock non-recursive.
- Push down locking in detach() and ioctl().
- Fix the tick routine to bail if the interface has been stopped and use
  callout_drain() in detach() after the call to stop().
- Lock the driver lock in the ifmedia handlers.

Tested by:	Ketrien I. Saihr-Kesenchedra ketrien at error404.nls.net
MFC after:	1 week
2005-08-05 16:03:16 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Matthew N. Dodd
c7ae8b4fa8 Invert conditional and use continue to reduce nesting. 2005-04-13 01:32:06 +00:00
Warner Losh
d24ae19d0e Fix style(9) issues with __P removal.
Noticed by: bde
2005-02-24 22:33:05 +00:00
Warner Losh
d701c91325 Return BUS_PROBE_DEFAULT instead of 0. 2005-02-24 21:32:56 +00:00
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Matthew N. Dodd
1f73cc7d3d - Simplify pcn_probe() by moving vendor/device matching code to pcn_match().
- Avoid LOR in pcn_probe() by removing useless mutex stuff.
2004-12-03 18:35:00 +00:00
Matthew N. Dodd
219cfd405b - Move chip ID code into separate function.
- Initialize sc->pcn_type during ATTACH as softc contents may not surivive
  from PROBE.
- Print out chip-id to assist with ongoing pcn(4) debugging efforts.
2004-12-03 18:21:30 +00:00
Christian Brueffer
0b6470435c Fix a couple of typos in comments
MFC after:	3 days
2004-09-06 13:42:38 +00:00
Robert Watson
2a567ae5ec Tag a last set of PCI network interfaces as IFF_NEEDSGIANT until they
are either locked down or demonstrated MPSAFE.
2004-08-28 15:10:35 +00:00
Warner Losh
c3e7434f34 Remove burn bridges code that saved/restored the pci config registers
that are now handled in the pci bus layer.  They are no longer
necessary.
2004-06-28 20:07:03 +00:00
Christian Weisgerber
0e939c0cea Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
Poul-Henning Kamp
f11d01c3bc Add missing <sys/module.h> includes 2004-05-30 20:00:41 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Maxime Henrion
aa0444ecdb Stop setting ifp->if_output to ether_output() since ether_ifattach()
does it for us already.
2004-03-11 14:04:59 +00:00
David E. O'Brien
a55a017f42 Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.
Requested by:	bde,imp
2003-12-08 07:54:15 +00:00
Sam Leffler
5120abbfb4 Drop the driver lock around calls to if_input to avoid a LOR when
the packets are immediately returned for sending (e.g.  when bridging
or packet forwarding).  There are more efficient ways to do this
but for now use the least intrusive approach.

Reviewed by:	imp, rwatson
2003-11-14 19:00:32 +00:00
David E. O'Brien
4dc52c32bf Remove duplicate FBSDID's, move others to their right place. 2003-11-14 17:16:58 +00:00
David E. O'Brien
aa8255025a Try to create some sort of consistency in how the routings to find the
multicast hash are written.  There are still two distinct algorithms used,
and there actually isn't any reason each driver should have its own copy
of this function as they could all share one copy of it (if it grew an
additional argument).
2003-11-13 20:55:53 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Warner Losh
19b7ffd1b8 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:20:27 +00:00
Warner Losh
b84e866a18 Due to extreme bogusness in the pci bus layer, these drivers were
forced to do slightly bogus power state manipulation.  However, this
is one of those features that is preventing further progress, so mark
them as BURN_BIRDGES like I did for the drivers in sys/dev/...

This, like the other change, are a no-op unless you have BURN_BRIDGES
in your kernel.
2003-07-03 21:39:53 +00:00
Poul-Henning Kamp
50cc8392cc Remove unused variables.
Remove now unused pointer to ether header.
Remove break after return

Found by:       FlexeLint
2003-05-31 20:02:43 +00:00
Warner Losh
214073e5e4 Use newly minted device_is_attached rather than device_is_alive to see
if attach succeeded.  device_is_alive just tells us that probe
succeeded.  Since we were using it to do things like detach net
interfaces, this caused problems when there were errors in the attach
routine.

Symptoms of problem reported by: martin blapp
2003-04-21 18:34:04 +00:00
David E. O'Brien
152385d122 Explicitly declare 'int' parameters. 2003-04-21 16:27:46 +00:00
Nate Lawson
693f4477b1 Revise attach/detach resource cleanup
- Unconditionally call *_stop() if device is in the tree. This is to
  prevent callouts from happening after the device is gone. Checks for
  bus_child_present() should be added in the future to keep from touching
  potentially non-existent hardware in *_detach().  Found by iedowse@.
- Always check for and free miibus children, even if the device is not in
  the tree since some failure cases could have gotten here.
- Call ether_ifdetach() in the irq setup failure case
- ti(4), xl(4): move ifmedia_init() calls to the beginning of attach so
  that ifmedia_removeall() can be unconditionally called on detach. There
  is no way to detect whether ifmedia has been initialized without using
  a separate variable (as tl(4) does).
- Add comments to indicate assumptions of code path
2003-04-17 20:32:06 +00:00
John Baldwin
918f6e721b Remove another unused variable. 2003-04-16 15:24:17 +00:00
Matthew N. Dodd
046d2c31c8 Remove some code that managed to escape from my local repository. 2003-04-16 13:18:27 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
John Baldwin
59f47d29b7 Add missing ()'s so that these drivers all compile again.
Noticed by:	jake
Tested on:	i386 (compile)
2003-03-31 20:22:00 +00:00
Nate Lawson
54f1f1d1e6 Clean up locking and resource management for pci/if_*
- Remove locking of the softc in the attach method, instead depending on
  bus_setup_intr being at the end of attach (delaying interrupt enable until
  after ether_ifattach is called)
- Call *_detach directly in the error case of attach, depending on checking
  in detach to only free resources that were allocated.  This puts all
  resource freeing in one place, avoiding thinkos that lead to memory leaks.
- Add bus_child_present check to calls to *_stop in the detach method to
  be sure hw is present before touching its registers.
- Remove bzero softc calls since device_t should do this for us.
- dc: move interrupt allocation back where it was before.  It was unnecessary
  to move it.  This reverts part of 1.88
- rl: move irq allocation before ether_ifattach.  Problems might have been
  caused by allocating the irq after enabling interrupts on the card.
- rl: call rl_stop before ether_ifdetach
- sf: call sf_stop before ether_ifdetach
- sis: add missed free of sis_tag
- sis: check errors from tag creation
- sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- sk: remove duplicate initialization of sk_dev
- ste: add missed bus_generic_detach
- ti: call ti_stop before ether_ifdetach
- ti: add missed error setting in ti_rdata alloc failure
- vr: add missed error setting in I/O, memory mapping cases
- xl: add missed error setting in I/O, memory mapping cases
- xl: remove multi-level goto on attach failure
- xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- Calls to free(9) are unconditional because it is valid to call free with a
  null pointer.

Reviewed by:	imp, mdodd
2003-03-31 17:29:43 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Matthew N. Dodd
df79cfe4a6 Fix an oversight in some code I added to the last commit. 2003-02-08 21:06:03 +00:00