Commit Graph

55 Commits

Author SHA1 Message Date
Peter Wemm
447b3772dc Change hw.physmem and hw.usermem to unsigned long like they used to be
in the original hardwired sysctl implementation.

The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int.  Use
'long' there.

Change Maxmem and physmem and related variables to 'long', mostly for
completeness.  Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody.  This
comes for free on 32 bit machines, so why not?
2002-08-30 04:04:37 +00:00
Poul-Henning Kamp
e1d970f181 Improve the implementation of adjtime(2).
Apply the change as a continuous slew rather than as a series of
discrete steps and make it possible to adjust arbitraryly huge
amounts of time in either direction.

In practice this is done by hooking into the same once-per-second
loop as the NTP PLL and setting a suitable frequency offset deducting
the amount slewed from the remainder.  If the remaining delta is
larger than 1 second we slew at 5000PPM (5msec/sec), for a delta
less than a second we slew at 500PPM (500usec/sec) and for the last
one second period we will slew at whatever rate (less than 500PPM)
it takes to eliminate the delta entirely.

The old implementation stepped the clock a number of microseconds
every HZ to acheive the same effect, using the same rates of change.

Eliminate the global variables tickadj, tickdelta and timedelta and
their various use and initializations.

This removes the most significant obstacle to running timecounter and
NTP housekeeping from a timeout rather than hardclock.
2002-04-15 12:23:11 +00:00
Mike Silbersack
77a7d074e4 Unconditionally limit maxproc so that it is not possible
to exhaust all kmaps.  The only reward for setting maxproc
to a value which will cause kmap exhaustion is a panic
during a forkbomb attack.

MFC after:	3 days
2002-03-07 04:50:36 +00:00
Matthew Dillon
0b94a0e9f9 Allow the kern.maxusers boot tuneable to be set to 0 (previously only
the kernel config's maxusers could be set to 0 for autosizing to work).
Reviewed by:	rwatson, imp
MFC after:	3 days
2002-02-06 01:19:19 +00:00
Matthew Dillon
4fbd563eb8 Make the 'maxusers 0' auto-sizing code slightly more conservative. Change
from 1 megabyte of ram per user to 2 megabytes of ram per user, and
reduce the cap from 512 to 384.  512 leaves around 240 MB of KVM available
while 384 leaves 270 MB of KVM available.  Available KVM is important
in order to deal with zalloc and kernel malloc area growth.

Reviewed by:	mckusick
MFC: either before 4.5 if re's agree, or after 4.5
2002-01-25 01:54:16 +00:00
Peter Wemm
f6916f666c Proper fix for old config setting maxusers to 8. 2001-12-14 09:39:29 +00:00
Matthew Dillon
7ca592e093 Too many people are compiling kernels with maxusers set to 0 without the new
config.  Hack the kernel to force auto-sizing if the old config is used.
2001-12-14 04:01:08 +00:00
Mike Silbersack
ebacce5e99 Limit maxprocperuid to 9/10 maxproc, and limit maxfilesperproc to 9/10
maxfiles.  This should make local resource exhaustion attacks easier
to handle with a non-tweaked setup.

MFC after:	3 days
2001-12-13 20:00:45 +00:00
Matthew Dillon
66a11b9fb1 Allow maxusers to be specified as 0 in the kernel config, which will
cause the system to auto-size to between 32 and 512 depending on the
amount of memory.

MFC after:	1 week
2001-12-09 01:57:09 +00:00
Matthew Dillon
f286003909 Create a mutex pool API for short term leaf mutexes.
Replace the manual mutex pool in kern_lock.c (lockmgr locks) with the new API.
Replace the mutexes embedded in sxlocks with the new API.
2001-11-13 21:55:13 +00:00
Paul Saab
cbc89bfbfe Make MAXTSIZ, DFLDSIZ, MAXDSIZ, DFLSSIZ, MAXSSIZ, SGROWSIZ loader
tunable.

Reviewed by:	peter
MFC after:	2 weeks
2001-10-10 23:06:54 +00:00
Matthew Dillon
e1616f3a7b Conditionalize VM_SWZONE_SIZE_MAX and VM_BCACHE_SIZE_MAX so MD sections
that don't define these constants don't break.
2001-08-20 16:29:13 +00:00
Matthew Dillon
2f9e4e8025 Limit the amount of KVM reserved for the buffer cache and for swap-meta
information.  The default limits only effect machines with > 1GB of ram
and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX
and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and
kern.maxbcache.  This has the effect of leaving more KVM available for
sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad
adds memory to a machine and then sees the kernel panic on boot due to
running out of KVM.

Also change the default swap-meta auto-sizing calculation to allocate half
of what it was previously allocating.  The prior defaults were way too high.
Note that we cannot afford to run out of swap-meta structures so we still
stay somewhat conservative here.
2001-08-20 00:41:12 +00:00
Peter Wemm
ee342e1bf1 Move param.c out of the conf directory and make it fully dynamic.
Tunables are now derived at boot time from maxusers.  ie: change maxusers
via a tunable and all the derivative settings change.  You can change
the other tunables individually as well.  Even hz etc is tunable.
2001-07-26 23:04:03 +00:00
Bosko Milekic
08442f8a82 Introduce numerous SMP friendly changes to the mbuf allocator. Namely,
introduce a modified allocation mechanism for mbufs and mbuf clusters; one
which can scale under SMP and which offers the possibility of resource
reclamation to be implemented in the future. Notable advantages:

 o Reduce contention for SMP by offering per-CPU pools and locks.
 o Better use of data cache due to per-CPU pools.
 o Much less code cache pollution due to excessively large allocation macros.
 o Framework for `grouping' objects from same page together so as to be able
   to possibly free wired-down pages back to the system if they are no longer
   needed by the network stacks.

 Additional things changed with this addition:

  - Moved some mbuf specific declarations and initializations from
    sys/conf/param.c into mbuf-specific code where they belong.
  - m_getclr() has been renamed to m_get_clrd() because the old name is really
    confusing. m_getclr() HAS been preserved though and is defined to the new
    name. No tree sweep has been done "to change the interface," as the old
    name will continue to be supported and is not depracated. The change was
    merely done because m_getclr() sounds too much like "m_get a cluster."
  - TEMPORARILY disabled mbtypes statistics displaying in netstat(1) and
    systat(1) (see TODO below).
  - Fixed systat(1) to display number of "free mbufs" based on new per-CPU
    stat structures.
  - Fixed netstat(1) to display new per-CPU stats based on sysctl-exported
    per-CPU stat structures. All infos are fetched via sysctl.

 TODO (in order of priority):

  - Re-enable mbtypes statistics in both netstat(1) and systat(1) after
    introducing an SMP friendly way to collect the mbtypes stats under the
    already introduced per-CPU locks (i.e. hopefully don't use atomic() - it
    seems too costly for a mere stat update, especially when other locks are
    already present).
  - Optionally have systat(1) display not only "total free mbufs" but also
    "total free mbufs per CPU pool."
  - Fix minor length-fetching issues in netstat(1) related to recently
    re-enabled option to read mbuf stats from a core file.
  - Move reference counters at least for mbuf clusters into an unused portion
    of the cluster itself, to save space and need to allocate a counter.
  - Look into introducing resource freeing possibly from a kproc.

Reviewed by (in parts): jlemon, jake, silby, terry
Tested by: jlemon (Intel & Alpha), mjacob (Intel & Alpha)
Preliminary performance measurements: jlemon (and me, obviously)
URL: http://people.freebsd.org/~bmilekic/mb_alloc/
2001-06-22 06:35:32 +00:00
Poul-Henning Kamp
da936bf80a Remove unneeded <stddef.h> #includes. 2000-10-29 16:57:42 +00:00
Jason Evans
9722d88fba For lockmgr mutex protection, use an array of mutexes that are allocated
and initialized during boot.  This avoids bloating sizeof(struct lock).
As a side effect, it is no longer necessary to enforce the assumtion that
lockinit()/lockdestroy() calls are paired, so the LK_VALID flag has been
removed.

Idea taken from:	BSD/OS.
2000-10-12 22:37:28 +00:00
Peter Wemm
ab063af911 Move the MSG* and SEM* options to opt_sysvipc.h
Remove evil allocation macros from machdep.c (why was that there???) and
use malloc() instead.
Move paramters out of param.h and into the code itself.
Move a bunch of internal definitions from public sys/*.h headers (without
#ifdef _KERNEL even) into the code itself.

I had hoped to make some of this more dynamic, but the cost of doing
wakeups on all sleeping processes on old arrays was too frightening.
The other possibility is to initialize on the first use, and allow
dynamic sysctl changes to parameters right until that point. That would
allow /etc/rc.sysctl to change SEM* and MSG* defaults as we presently
do with SHM*, but without the nightmare of changing a running system.
2000-05-01 13:33:56 +00:00
Peter Wemm
255108f385 Make sysv-style shared memory tuneable params fully runtime adjustable
via sysctl.  It's done pretty simply but it should be quite adequate.
Also move SHMMAXPGS from $machine/include/vmparam.h as the comments that
went with it were wrong... we don't allocate KVM space for the pages so
that comment is bogus..  The only practical limit is how much physical
ram you want to lock up as this stuff isn't paged out or swap backed.
2000-03-30 07:17:05 +00:00
Brian Feldman
f48b807fc0 This is Bosko Milekic's mbuf allocation waiting code. Basically, this
means that running out of mbuf space isn't a panic anymore, and code
which runs out of network memory will sleep to wait for it.

Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
Reviewed by:	green, wollman
1999-12-12 05:52:51 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Mike Smith
134c934ce7 Move the initialisation/tuning of nmbclusters from param.c/machdep.c
into uipc_mbuf.c.  This reduces three sets of identical tunable code to
one set, and puts the initialisation with the mbuf code proper.

Make NMBUFs tunable as well.

Move the nmbclusters sysctl here as well.

Move the initialisation of maxsockets from param.c to uipc_socket2.c,
next to its corresponding sysctl.

Use the new tunable macros for the kern.vm.kmem.size tunable (this should have
been in a separate commit, whoops).
1999-07-05 08:52:54 +00:00
Dag-Erling Smørgrav
5a00f36414 Allow setting MAXFILES in the kernel config. 1999-04-09 16:28:11 +00:00
Matthew Dillon
3ea57f9da2 Fixed problems with kernel config file overrides of sysv semaphore
parameters.  Prior to this fix a kernel config override would effect
only some of the kernel files, resulting in panics.

PR:	kern/9068
1998-12-14 08:34:55 +00:00
David Greenman
dd0b2081f4 Implemented zero-copy TCP/IP extensions via sendfile(2) - send a
file to a stream socket. sendfile(2) is similar to implementations in
HP-UX, Linux, and other systems, but the API is more extensive and
addresses many of the complaints that the Apache Group and others have
had with those other implementations. Thanks to Marc Slemko of the
Apache Group for helping me work out the best API for this.
Anyway, this has the "net" result of speeding up sends of files over
TCP/IP sockets by about 10X (that is to say, uses 1/10th of the CPU
cycles) when compared to a traditional read/write loop.
1998-11-05 14:28:26 +00:00
Bruce Evans
bef7db2e66 Moved definition of fscale from param.c to kern_synch.c where it
should always have been (it has no user-servicable parts even at
compile time) and staticized it.
1998-07-11 13:06:41 +00:00
Poul-Henning Kamp
8cb5266728 Add 3 sysctl variables for future use by ps)1_ 1998-06-30 21:25:58 +00:00
Bruce Evans
df471779ea Round tickadj up. This prevents tickadj from being 0 when HZ > 500,
which makes adjtime(2) useless and confuses xntpd(8) into refusing
to start even when it would use the kernel PLL instead of adjtime().
The result is the same as recommended by tickadj(8), at least when
HZ divides 10^6.  Of course, you wouldn't want to actually use
adjtime() when HZ is large.  In the silly boundary case of HZ == 10^6,
tickadj == tick == 1 so the clock stops while adjtime() is active.
1998-06-21 12:22:35 +00:00
Garrett Wollman
98271db4d5 Convert socket structures to be type-stable and add a version number.
Define a parameter which indicates the maximum number of sockets in a
system, and use this to size the zone allocators used for sockets and
for certain PCBs.

Convert PF_LOCAL PCB structures to be type-stable and add a version number.

Define an external format for infomation about socket structures and use
it in several places.

Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through
sysctl(3) without blocking network interrupts for an unreasonable
length of time.  This probably still has some bugs and/or race
conditions, but it seems to work well enough on my machines.

It is now possible for `netstat' to get almost all of its information
via the sysctl(3) interface rather than reading kmem (changes to follow).
1998-05-15 20:11:40 +00:00
Guido van Rooij
d3c0af6943 Raise ncallout from NPROC + 16 to NPROC + 16 + MAXFILES. This shold
prevent a possible DOS attack. The proper fix (to dynamically grow
the callout list) is in the make.
Submitted by:	Paul Traina
1998-02-27 19:58:29 +00:00
Bruce Evans
ac5fcb6d4d Removed unused #includes. 1997-06-14 11:38:46 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Bruce Evans
5131d64e0c Removed option EXTRAVNODES. All versions of FreeBSD-2.x have a sysctl
variable `kern.maxvnodes' which gives much better control over vnode
allocation than EXTRAVNODES (except in -current between 1995/10/28 and
1996/11/12, kern.maxvnodes was read-only and thus useless).
1997-01-16 13:16:10 +00:00
David Greenman
649c409d03 Fix bug related to map entry allocations where a sleep might be attempted
when allocating memory for network buffers at interrupt time. This is due
to inadequate checking for the new mcl_map. Fixed by merging mb_map and
mcl_map into a single mb_map.

Reviewed by:	wollman
1997-01-15 20:46:02 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Peter Wemm
114a8cff43 Add an option "EXTRA_VNODES" to cause an extra number of vnode structures
to be allocated at boot time.  This is an expensive option, as they
consume physical ram and are not pageable etc.  In certain situations,
this kind of option is quite useful, especially for news servers that
access a large number of directories at random and torture the name cache.
Defining 5000 or 10000 extra vnodes should cut down the amount of vnode
recycling somewhat, which should allow better name and directory caching
etc.

This is a "your mileage may vary" option, with no real indication of
what works best for your machine except trial and error.  Too many will
cost you ram that you could otherwise use for disk buffers etc.

This is based on something John Dyson mentioned to me a while ago.
1996-05-31 00:20:34 +00:00
Garrett Wollman
cb7545a995 Allocate mbufs from a separate submap so that NMBCLUSTERS works as
expected.
1996-05-10 19:28:55 +00:00
Poul-Henning Kamp
e911eafcba removed:
CLBYTES PD_SHIFT PGSHIFT NBPG PGOFSET CLSIZELOG2 CLSIZE pdei()
        ptei() kvtopte() ptetov() ispt() ptetoav() &c &c
new:
        NPDEPG

Major macro cleanup.
1996-05-02 14:21:14 +00:00
Poul-Henning Kamp
f8845af0db First pass at cleaning up macros relating to pages, clusters and all that. 1996-05-02 10:43:17 +00:00
Jeffrey Hsu
70b012cab2 Merge in Lite2: proc LIST changes.
Reviewed by:	david & bde
1996-03-11 05:52:50 +00:00
Peter Wemm
4bd4912865 Add more options into the conf/options and i386/conf/options.i386 files
and the #include hooks so that 'make depend' is more useful.  This
covers most of the options I regularly use (but not all) and some other
easy ones.
1996-03-02 18:24:13 +00:00
Garrett Wollman
50c73f3620 Convert SYSV IPC to new-style options. (I hope I got everything...)
The LKMs will need an extra file, to come later.
1996-01-04 20:29:06 +00:00
Poul-Henning Kamp
154c04e573 Last commit this round: Staticize.
we are now down to about 1146 symbols being global, of which
I estimate that about 100 are validly so.
1995-12-10 13:45:30 +00:00
Bruce Evans
28f8db1403 Eliminate sloppy common-style declarations. There should be none left for
the LINT configuation.
1995-07-29 11:44:31 +00:00
David Greenman
3d5e37c501 Removed "GATEWAY" consideration when calculating number of mbuf clusters.
It now always uses the value that was used for the GATEWAY case.
1995-06-29 08:21:32 +00:00
David Greenman
ac7e6123a6 Killed "TIMEZONE" and "DST" options. They have been forced to 0 by config
for more than a year now. Moved the declaration of 'tz' into kern_time.c.
1995-06-29 07:07:00 +00:00
David Greenman
cddc961a83 Made "NMBCLUSTERS" calculation dynamic and fixed bogus use of "NMBCLUSTERS"
in machdep.c (it should use the global nmbclusters). Moved the calculation
of nmbclusters into conf/param.c (same place where nmbclusters has always
been assigned), and made the calculation include an extra amount based
on "maxusers". NMBCLUSTERS can still be overrided in the kernel config
file as always, but this change will make that generally unnecessary. This
fixes the "bug" reports from people who have misconfigured kernels seeing
the network "hang" when the mbuf cluster pool runs out.

Reviewed by:	John Dyson
1995-05-25 07:36:24 +00:00
Guido van Rooij
e6373c9ec0 Implement maxprocperuid and maxfilesperproc. They are tunable
via sysctl(8). The initial value of maxprocperuid is maxproc-1,
that of maxfilesperproc is maxfiles (untill maxfile will disappear)

Now it is at least possible to prohibit one user opening maxfiles

-Guido

Submitted by:
Obtained from:
1995-02-20 19:42:42 +00:00
Joerg Wunsch
3ab1adc555 Alow overriding of the various SHM* options.
Submitted by:	Heikki Suonsivu <hsu@fx7.cs.hut.fi>
1995-02-16 11:29:19 +00:00
David Greenman
ec2bb6ade1 Increase maxfiles to NPROC*2. This makes the per-process open file limit
highly bogus, however, and this needs to be fixed.
1995-01-12 03:38:12 +00:00