Commit Graph

129 Commits

Author SHA1 Message Date
Roger Hardiman
ca0c4630a1 Move the bktr Bt848/Bt878 driver to /sys/dev/bktr
Phase 1) move the driver
Phase 2)
Phase 3) Profit, by splitting the driver into smaller files like
bktr_tuner, bktr_card, bktr_audio, bktr_<osname>
making it easier to maintain and understand.
1999-09-22 06:46:08 +00:00
Roger Hardiman
f53c00ee1a Update to driver release 1.74
Bug fix:     xmradio nolonger experiences a 6Mhz offset after running FXTV

New feature: Automatic Tuner selection for AVerMedia cards with
             configuration EEPROMs on (ie the Bt878 based cards)
1999-09-17 21:28:23 +00:00
Roger Hardiman
1ea586719f Sync with driver release 1.74 1999-09-17 17:06:36 +00:00
Roger Hardiman
76e2530cfb Update to driver 1.73
Add new hauppauge Tuner Type 6
Add Aims Labs Video Highway Xtreme card type
1999-09-10 12:08:36 +00:00
Roger Hardiman
216c19e338 Update to driver 1.72.
Fix a bug where video capture locks up on channel changes.
Many thanks to Juha for solving this.

Submitted by: Juha Nurmela <Juha.Nurmela@quicknet.inet.fi>
1999-09-01 14:09:53 +00:00
Roger Hardiman
2dd2ab9fc8 Oops. I undid the $Id: -> $FreBSD: change.
Put it back to $FreeBSD:
1999-08-31 10:32:42 +00:00
Roger Hardiman
2271cf26df Update to driver release 1.71
New Features:
Greatly improved VBI capture support. (mainly for the AleVT port)
Supports select() on /dev/vbi
Improved RISC program for RGB+VBI capture to capture both evenodd
VBI data even when only capturing even only (or odd only) video
Based on code from Juha Nurmela <Juha.Nurmela@quicknet.inet.fi>

Support for Hauppauge 627 and Temic 4006
Submitted by: Maurice Castro <maurice@atum.castro.aus.net>

Bug Fix:
Fix bug in AverMedia card detection.
1999-08-31 10:29:42 +00:00
Roger Hardiman
a8a77e3724 Add #include <sys/select.h> ready for select() support in bt848 driver 1999-08-30 09:28:47 +00:00
Bruce Evans
3de9d6fbe4 Don't restrict our requests for contiguous memory to addresses >= 1MB.
This fixes, at least, panics in ncr_attach() on i386's with about 5MB
of memory.  The restriction was a hack to leave some low memory for ISA
DMA, but on i386's we now allocate pages from the top down, so all the
restriction did was cause our allocations to fail when there is no free
memory above 1MB.
1999-08-29 09:03:58 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Roger Hardiman
4efbc31757 Bug fixes
Change number of VBI lines from 16 to 12 for NTSC formats.
 Juha.Nurmela@quicknet.inet.fi found/fixed bug in VBI_SLEEP.

New features
 MSP3430G DBX initialisation from Matt Brown <matt@dqc.org>
 STB Bt878 card identification.
 Hauppauge Model Number identification.
 Changes to probeCard() for better eeprom identification.
 Experimental TDA9850 initialisation code, from Linux bttv.

Cross Platform Changes
 The driver has been reorgainsed based ideas from Brad Parker's port to Linux
 to seperate OS Dependant and Independant sections.
 I have backends for FreeBSD 2.2.x/3.x and 4.x newbus, BSDI, OpenBSD and NetBSD.

This commit has FreeBSD 2.2.8/2.2-stable/3.x and FreeBSD 4.x newbus backends.

Some code submitted by: Juha.Nurmela@quicknet.inet.fi
                        Matt Brown <matt@dqc.org>
                        Brad Parker <brad@parker.boston.ma.us>

Some code obtained from:        Linux bttv driver
1999-07-12 15:51:50 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Peter Wemm
9929d2a045 Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files.  config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
Roger Hardiman
3d68f363a4 Removed checking for unit>NBKTR.
No longer need when using device_get_softc.
(also fixed bug where loadable bktr module could only access 1st device)
1999-06-13 16:05:00 +00:00
Roger Hardiman
5a2f31f0fb Updated to use the new 4.x newbus API
Also removed the BSDI support (for now)
This allows the driver to be loaded/unloaded as a KLD
and loaded in the boot loader phase whithout making a custom kernel.
1999-06-12 14:54:56 +00:00
Roger Hardiman
2dc6d34fac Fix the cdevsw_add change made by PHK.
(It was accidentally added to the BSDI bktr_probe and not the
 FreeBSD bktr_probe)
1999-06-04 13:24:54 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Roger Hardiman
8fa3a2e7ed Rename 849 to 849A (the correct name for the IC) 1999-05-25 12:44:40 +00:00
Roger Hardiman
ec3a598be7 Add support for the Bt878/Bt879's Intel 430 FX and
SIS/VIA/ OPTi chipset PCI bus workarounds.

These make the Bt878/879 chips stabler on certain
older and non-intel motherboards.

Use options BKTR_430_FX_MODE
or  options BKTR_SIS_VIA_MODE
to enable these modes.

Also rename 849 to 849A
1999-05-25 12:43:40 +00:00
Roger Hardiman
ab27fe4452 Added rgb_vbi_prog() to capture VBI data and video at the
same time. To capture VBI data, /dev/vbi must be opened
before starting video capture.
A partly on code from Hiroki Mori <mori@infocity.co.jp>
1999-05-23 21:40:51 +00:00
Bruce Evans
1979249db2 Restored rev.1.76 which was clobbered by rev.1.77. 1999-05-22 04:34:59 +00:00
Roger Hardiman
d3a26f0c62 Updated Australian channel frequencies
Submitted by: Ivan Brawley <brawley@internode.com.au>
1999-05-19 22:04:21 +00:00
Roger Hardiman
ec5d7ef31d Bt848 driver release 1.65
Change Intel GPIO mask to hopefully stop turning the Intel Camera off
Fixed tuner selection on Hauppauge card with tuner 0x0a
Replaced none tuner with no tuner for Theo de Raadt <deraadt@openbsd.org>.

Ivan Brawley <brawley@internode.com.au> added
the Australian channel frequencies.
1999-05-18 12:16:15 +00:00
Roger Hardiman
ec2a37ea3c Bt848 driver release 1.65
Updated with australian channel set

Submitted by:	Ivan Brawley <brawley@internode.com.au>
1999-05-18 12:14:39 +00:00
Bruce Evans
a8481cfc72 memcmp -> bcmp. memcmp doesn't exist in the kernel, but unfortunately
it exists as a gcc builtin provided the kernel is not compiled with
-O0 or -fno-builtin.
1999-05-13 07:54:24 +00:00
Roger Hardiman
458b25e55b Support LifeView FlyVideo 98 cards. Use EEPROM for card autodetection.Use
bttv's audio mux values.

Automatically locate the EEPROM i2c address and read the subsystem_vendor_id
from EEPROM and not the PCI registers.

Add NSMBUS checks around smbus/iicbus i2c bus code

Add GPIO mask for the audio mux to each card type.
Add CARD_ZOLTRIX and CARD_KISS from mailing list searches.

Tested by: Paul Reece <paul@fastlane.net.au>,
           Ivan Brawley <brawley@internode.com.au> and
           Gilad Rom <rom_glsa@ein-hashofet.co.il>
1999-05-10 10:10:13 +00:00
Roger Hardiman
af36b88b1b Update card type to support GPIO mask
Add NSMBUS checks around smbus/iicbus i2c bus code.
1999-05-10 10:08:50 +00:00
Roger Hardiman
2a3fb485f9 Add #if (NSMBUS>0) checks around smbus/iicbus i2c bus code. 1999-05-10 10:08:05 +00:00
Peter Wemm
579f45fa60 Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Roger Hardiman
541157e3ac My last commit accidentally undid the changes made in rev 1.68
regarding COMPAT_PCI_DRIVER. Put them back.
1999-04-30 11:16:30 +00:00
Roger Hardiman
f677e15fe8 Added initial code for VBI capture based on work by
Hiroki Mori <mori@infocity.co.jp> and reworked by myself.
This allows software decoding of teletext, intercast and
subtitles via /dev/vbi.
1999-04-29 10:15:55 +00:00
Roger Hardiman
26da6e9453 Add support for VBI capture from /dev/vbi.
This will allow software teletext/intercast/subtitles decoding
while watching a TV station.

Based on code from Hiroki Mori <mori@infocity.co.jp> but reworked by
myself.
1999-04-29 10:01:28 +00:00
Roger Hardiman
ea2052d226 Added new cards: NEC PK-UG-X017 and I/O DATA GV-BCTV2/PCI
Added new tuner: ALPS_TSBH1 (plus FM Radio for ALPS_TSCH5)
Added support for BCTV audio mux.

Submitted by Hiroki Mori <mori@infocity.co.jp>
1999-04-29 09:57:47 +00:00
Roger Hardiman
c8f810a76e Fix crashes caused by rows=0 or columns=0.
Add new #ifdef. By defining BKTR_NO_MSP_RESET you can prevent the
MSP34xx being reset by the bt848 driver. This is handy
if you pre-initialise the MSP34xx stereo audio chip in another
operating system first (eg MS Windows).
Suggested by:  Randal Hopper<aa8vb@ipass.net>
Suggested by:  Yuri Gindin <yuri@xpert.com>
1999-04-29 05:48:32 +00:00
Dmitrij Tejblum
604359cf9b s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
Peter Wemm
96b3554e5c Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
Roger Hardiman
efe3a31e73 My changes:
Added autodetection of MMAC Osprey 100 card for
Jan Schmidt <mmedia@rz.uni-greifswald.de>. The MMAC card has an EEPROM
which contains an ASCII string beginning with "MMAC".
Corrected Hauppauge Audio Mux Mute value from 0x01 to 0x04.
Fixed a typo.

Sumitted change:
Added ALPS Tuner Type submitted by Hiroki Mori <mori@infocity.co.jp>

Submitted by:	Roger Hardiman and Hiroki Mori <mori@infocity.co.jp>
1999-02-25 07:45:47 +00:00
Roger Hardiman
02819e7033 Corrected ioctl numbers conflict.
Thanks to Vsevolod Lobko <seva@alex-ua.com> for spotting this.
P:
1999-02-15 11:04:36 +00:00
Roger Hardiman
f02529f9b2 Added ioctl REMOTE_GETKEY for Hauppauge Infra-Red Remote Control.
Submitted by Roger Hardiman.

Added ioctl TVTUNER_GETCHANSET to discover which regions the bktr driver
supports. Submitted by Vsevolod Lobko <seva@alex-ua.com>

Added BT848_GPIO_SET_EN,BT848_GPIO_SET_DATA (and GETs) to allow user land
control of the GPIO pins. This allows a Radio module on the GPIO port
to be controlled. Submitted by Vsevolod Lobko <seva@alex-ua.com>
The kernel option BKTR_GPIO_ACCESS must be used to enable the GPIO ioctls.

Submitted by:	Roger Hardiman and Vsevolod Lobko <seva@alex-ua.com>
1999-02-11 10:22:30 +00:00
Roger Hardiman
29122ece3e Added new ioctls for Hauppage Infra-Red Remote Control support,
Obtaining the supported channel sets and Controlling the GPIO port.

Submitted by:	Roger Hardiman and Vsevolod Lobko <seva@alex-ua.com>
1999-02-11 10:18:04 +00:00
Roger Hardiman
08d8a5b841 Added detection for bt848a chips 1999-02-08 11:55:30 +00:00
Roger Hardiman
a3869d3479 Added check to bktr_mmap() from OpenBSD driver.
Improved MSP34xx reset for bt848 Hauppauge boards.
Added detection for Bt848a.
Vsevolod Lobko<seva@sevasoft.alex-ua.com> added more XUSSR channels.
Submitted by:	parts from Vsevolod Lobko<seva@sevasoft.alex-ua.com>
Obtained from:  parts from OpenBSD
1999-02-08 11:53:05 +00:00
Roger Hardiman
f60cbfffac Support for MSP3410D / MSP3415D Stereo/Mono audio using the audio format
Auto Detection Mode. This leaves MSP3400C owners still unsupported.
Thanks to Gerd Knorr <kraxel@cs.tu-berlin.de> for providing some early
assistance and sample code in the linux bttv driver.
Nicolas Souchu <nsouch@freebsd.org> ported the msp_read/write/reset
functions to smbus/iicbus.

METEOR_INPUT_DEV2 now selects a composite camera on the SVIDEO port.
For true SVIDEO, use METEOR_INPUT_DEV_SVIDEO.
If you get a monochrome image from the SVIDEO port, you have
seleted the wrong input type.

Tested by:      Johan Larsson<gozer@ludd.luth.se>
1999-01-28 17:47:47 +00:00
Roger Hardiman
ba66f0a223 Added METEOR_DEV2 and METEOR_DEV3 1999-01-28 16:32:52 +00:00
Matthew Dillon
8aef171243 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-28 00:57:57 +00:00
Roger Hardiman
2c401a831e Added detection of Hauppauge IR remote control.
and MSP34xx Audio chip. Fixed i2c read error.
Hauppauge supplied details of new Tuner Types.
Added tuner type 0x1a.
Danny Braniss <danny@cs.huji.ac.il> submitted Bt878
AverMedia detection with PCI subsystem vendor id.
1999-01-23 11:32:06 +00:00