of I/O in 1.5. It looks like I got it right only for some of the
cases. Instead, allow ISA addresses as a special case. Most PCI
bridges decode this range. I need to investigate PCI bridges better
to know if this is always true or not, but for now assume that it is
since that seems to be the most common case.
# We need to allocate addresses better for the pccard stuff...
Submitted by: phk, mitsunaga-san
- Fix null-pointer dereference introduced when snapshotting
was introduced. This occured because unlike the previous code,
vn_start_write() doesn't always return a non-NULL mp, as
filesystems may not support the VOP_GETWRITEMOUNT() call. For
now, rely on two pointers, so that vn_finished_write() works
properly.
- Fix locking problems on exit, introduced at some past time,
some when snapshots came in, where a vnode might not be
unlocked before being vrele'd in various error situations.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
sys/time.h:137: integer constant out of range
sys/time.h:137: warning: decimal integer constant is so large that it is unsigned
sys/time.h:153: integer constant out of range
sys/time.h:153: warning: decimal integer constant is so large that it is unsigned
inode'' panic. This change corrects that problem by setting the
fs_active flag when the inode map changes to notify the snapshot
code that the cylinder group must be rescanned.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
The binary format "bintime" is a 32.64 format, it will go to 64.64
when time_t does.
The bintime format is available to consumers of time in the kernel,
and is preferable where timeintervals needs to be accumulated.
This change simplifies much of the magic math inside the timecounters
and improves the frequency and time precision by a couple of bits.
I have not been able to measure a performance difference which was not
a tiny fraction of the standard deviation on the measurements.
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
without being reclaimed. This bug was introduced in revision 1.95
dealing with filenames placed in newly allocated directory blocks,
thus is not present in 4.X systems. The bug is triggered when a
new entry is made in a directory after the data block containing
the original new entry has been written, but before the inode
that references the data block has been written.
Submitted by: Bill Fenner <fenner@research.att.com>
to fix their code.
ata stuff:
Change name of ar_attach to not colide with existing ar_attach in if_ar.c.
usb stuff:
Create a dummy function to satisfy a call to it when in DEBUG mode.
- Create a private list of active pmaps rather than abusing the list of all
processes when we need to look up pmaps. The process list needs a sx lock
and we can't be getting sx locks in the middle of cpu_switch()
(pmap_activate() can call pmap_get_asn() from cpu_switch()). Instead, we
protect the list with a spinlock. This also means the list is shorter
since a pmap can be used by more than one process and we could (at least
in thoery) dink with pmap's more than once, but now we only touch each
pmap once when we have to update all of them.
- Wrap pmap_activate()'s code to get a new ASN in an explicit critical section
so that when it is called while doing an exec() we can't get preempted.
- Replace splhigh() in pmap_growkernel() with a critical section to prevent
preemption while we are adjusting the kernel page tables.
- Fixes abuse of PCPU_GET(), which doesn't return an L-value.
- Also adds some slight cleanups to the ASN handling by adding some macros
instead of magic numbers in relation to the ASN and ASN generations.
Reviewed by: dfr
check is complicated by the fact that the Adaptec 5400S cards claim to use
1.x firmware also. PERC2/QC 1.x firmware is not compatible with this driver
and will cause a system hang.
MFC after: 3 days
shared.
Also introduce vm_endcopy instead of using pointer tricks when
initializing new vmspaces.
The race occured because of how the reference was utilized:
test vmspace reference,
possibly block,
decrement reference
When sharing a vmspace between multiple processes it was possible
for two processes exiting at the same time to test the reference
count, possibly block and neither one free because they wouldn't
see the other's update.
Submitted by: green
HZ=BIGNUM will strain the assumptions behind timecounters to the
point where they break.
This may or may not help people seeing microuptime() backwards messages.
Make the global timecounter variable volatile, it makes no difference in
the code GCC generates, but it makes represents the intent correctly.
Thanks to: jdp
MFC after: 2 weeks
a particular Ethernet interface will actually be delivered by (only) that
device driver. This is not necessarily true when ng_ether(4) is used.
To word around this, while a ng_ether(4)'s "upper" hook is connected,
turn off all hardware checksum, fragmentation, etc., features for that
interface.
PR: kern/31586
MFC after: 1 week
disable MWI on 2300
based on function code, set an 'isp_port' for the 2312- it's a
separate instance, but the NVRAM is shared, and the second port's
NVRAM is at offset 256.
+ Enable RIO operation for LVD SCSI cards. This makes a *big* difference
as even under reasonable load we get batched completions of about 30
commands at a time on, say, an ISP1080.
+ Do 'continuation' mailbox commands- this allows us to specify a work
area within the softc and 'continue' repeated mailbox commands. This is
more or less on an ad hoc basis and is currently only used for firmware
loading (which f/w now loads substantially faster becuase the calling
thread is only woken when all the f/w words are loaded- not for each
one of the 40000 f/w words that gets loaded).
+ If we're about to return from isp_intr with a 'bogus interrupt' indication,
and we're not a 23XX card, check to see whether the semaphore register is
currently *2* (not *1* as it should be) and whether there's an async completion
sitting in outgoing mailbox0. This seems to capture cases of lost fast posting
and RIO interrupts that the 12160 && 1080 have been known to pump out under
extreme load (extreme, as in > 250 active commands).
+ FC_SCRATCH_ACQUIRE/FC_SCRATCH_RELEASE macros.
+ Endian correct swizzle/unswizzle of an ATIO2 that has a WWPN in it.
MFC after: 1 week
