place physical memory at an address outside the old DMAP range. This is an
issue as we rely on being able to move from PA -> VA using this range.
Obtained from: Patrick Wildt <patrick@bitrig.org> (earlier version)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3885
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
the map has been created via bounce_bus_dmamem_alloc(). In that case
bus_dmamap_unload(9) typically isn't called during normal operation
but still should be during detach, cleanup from failed attach etc.
Submitted by: yongari
MFC after: 3 days
map has been created via bounce_bus_dmamem_alloc(). Even for coherent
DMA - which bus_dmamem_alloc(9) typically is used for -, calling of
bus_dmamap_sync(9) isn't optional.
PR: 188899 (non-original problem)
MFC after: 3 days
This will enable the elimination of a workaround in the USB driver that
artifically allocates buffers twice as big as they need to be (which
actually saves memory for very small buffers on the buggy platforms).
When deciding how to allocate a dma buffer, armv4, armv6, mips, and
x86/iommu all correctly check for the tag alignment <= maxsize as enabling
simple uma/malloc based allocation. Powerpc, sparc64, x86/bounce, and
arm64/bounce were all checking for alignment < maxsize; on those platforms
when alignment was equal to the max size it would fall back to page-based
allocators even for very small buffers.
This change makes all platforms use the <= check. It should be noted that
on all platforms other than arm[v6] and mips, this check is relying on
undocumented behavior in malloc(9) that if you allocate a block of a given
size it will be aligned to the next larger power-of-2 boundary. There is
nothing in the malloc(9) man page that makes that explicit promise (but the
busdma code has been relying on this behavior all along so I guess it works).
Arm and mips code uses the allocator in kern/subr_busdma_buffalloc.c, which
does explicitly implement this promise about size and alignment. Other
platforms probably should switch to the aligned allocator.
the dynamic linker copy them, but not relocate them at the new location.
This allows us to run sqlite3 without it crashing.
Sponsored by: ABT Systems Ltd
Internal busses (thus ECAM access) should be mapped to
all values from 0 to 143.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D3753
When one tries to allocate a resource with unspecified range,
read already configured BAR values (by UEFI or whatever).
This is necessary to make VNIC VFs working and to allow them to be
properly allocated.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D3752
From the (now removed) comment:
* It is unclear in some cases if the bit is implementation defined.
* The Foundation Model and QEMU disagree on if the IL bit should
* be set when we are in a data fault from the same EL and the ISV
* bit (bit 24) is also set.
Instead of adding even more special cases just remove the assertion.
Approved by: andrew
Sponsored by: The FreeBSD Foundation
It turns out that it is pretty easy to make CloudABI work on ARM64. We
essentially only need to copy over the sysvec from AMD64 and ensure that
we use ARM64 specific registers.
As there is an overlap between function argument and return registers,
we do need to extend cloudabi64_schedtail() to only set its values if
we're actually forking. Not when we're creating a new thread.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3917
boot on an SoC that places physical memory at an address past where three
levels of page tables can access in an identity mapping.
Submitted by: Wojciech Macek <wma@semihalf.com>,
Patrick Wildt <patrick@bitrig.org>
Differential Revision: https://reviews.freebsd.org/D3885 (partial)
Differential Revision: https://reviews.freebsd.org/D3744
in through the stack pointer, however this may have been misaligned
causing some userland applications to crash. A workaround was committed in
r284707 where userland would check if the aux vector was passed using the
old or new ABI and adjust the stack if needed. As 4 months have passed it
is time to move to the new ABI, with the expectation the compat code in csu
and the runtime linker to be removed in the future.
Sponsored by: ABT Systems Ltd
an extra argument to specify the number of 1GiB pages to map. This should
be a nop as we are only mapping a single page, but when we move to use an
extra level of page tables we will be able to map a second block, e.g. if
the kernel was loaded over a 1GiB boundary.
While trying to get multithreading working for CloudABI on aarch64, I
noticed that compare-and-exchange operations in kernelspace would always
fail. It turns out that we don't properly set the return value to 0 when
the compare and exchange succeeds.
Approved by: andrew
Differential Revision: https://reviews.freebsd.org/D3899
- Move the required kernel compiler flags from Makefile.arm64 to kern.mk.
- Build arm64 modules as PIC; non-PIC relocations in .o for shared object
output cannot be handled.
- Do not try to install aarch64 symlink.
- A hack for arm64 to avoid ld -r stage. See the comment for the explanation.
Some functionality is lost, like ctf handling, but hopefully will be
restored after newer linker is available.
Reviewed by: andrew, emaste
Tested by: andrew (on real hardware)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3796
It is decided to go with the shared object file format for modules on
arm64, due to the Aarch64 instruction set details. Combination of the
signed 28-bit offset in the branch instructions encoding together with
the supported memory model of compilers makes the relocatable object
support impossible or at least too hard.
Reviewed by: andrew, emaste
Tested by: andrew (on real hardware)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3796
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
Submitted by: kmacy (an earlier version)
Differential Revision: https://reviews.freebsd.org/D1674
reschedule. Right now arm_cpu_intr() does critical_exit() as the last
action, so the impact is not serious.
Remove duplicated interrupt disable in restore_registers macro, when
returning to usermode. The do_ast macro disabled interrupts for us.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3714
We should not call vm_fault(), or send a signal, with interrupts
disabled. MI kernel code is not prepared for such environment, not to
mention that this increases system latency, since code appears to be
executing as being under spinlock.
The FAR register for data aborts is read before the interrupts are
enabled, to avoid its corruption due to nested exception or context
switch.
Add asserts, similar to the checks done by other architectures, about
not taking page faults in non-sleepable contexts, rather than die with
late and somewhat confusing witness diagnostic.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3669
in unknown state per spec.
Reviewed by: andrew (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3668
Currently FreeBSD supports only single PIC controller. Some systems
that have more than one (like ThunderX dual-socket) fails to boot.
Disable other PICes until proper handling is implemented in the
generic interrupt code.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3682
cpu_init_fdt will now release memory allocated for structures
serving CPUs that have failed to init.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3297
running thread.
It is currently implemented only on amd64 and i386; on these
architectures, it is implemented by raising an NMI on the CPU on which
the target thread is currently running. Unlike stack_save_td(), it may
fail, for example if the thread is running in user mode.
This change also modifies the kern.proc.kstack sysctl to use this function,
so that stacks of running threads are shown in the output of "procstat -kk".
This is handy for debugging threads that are stuck in a busy loop.
Reviewed by: bdrewery, jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3256
The only operation which is prevented by the hold is the kernel stack
swapout for the faulted thread, which should be fine to allow.
Remove useless checks for NULL curproc or curproc->p_vmspace from the
trap_pfault() wrappers on x86 and powerpc.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
* Fail when the length passed in is 0
* Remove an unneeded increment of the count on success
* Return ENAMETOOLONG when the input pointer is too long
Sponsored by: ABT Systems Ltd
store should have release semantics and will have due to the dsb above it
so add a comment to explain this. [1]
While here update the code to not reload the current thread, it's already
in a register, we just need to not trash it.
Suggested by: kib [1]
Sponsored by: ABT Systems Ltd
hardware to perform address translation for us. These are useful to help
track down what caused us to enter the debugger.
Sponsored by: ABT Systems Ltd
SoC is used in the HiKey board from 96boards.
Currently on the SD card is working on the HiKey, as such devices 0 and 2
will need to be disabled, for example by adding the following to
loader.conf:
hint.hisi_dwmmc.0.disabled=1
hint.hisi_dwmmc.2.disabled=1
Relnotes: yes (Hikey board booting)
Sponsored by: ABT Systems Ltd
its_cmd_send() can be called by multiple CPUs simultaneously.
After the command is pushed to ITS command ring the completion
status is polled using global pointer to the next free ring slot.
Use copied pointer and provide correct locking to avoid spurious
pointer value when concurrent access occurs.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3436
be used with any SoC specific drivers, for example a ThunderX nic driver
would use something like the following in files.arm64:
arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic
Reviewed by: imp
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3479
correctly handle trying to access an invalid address in the debugger.
While here document that the breakpoint handler is supposed to fall
through to the following case.
Sponsored by: ABT Systems Ltd
Increase MAXCPU number to the maximum known value the existing
hardware can support.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3405
The global variable has been only used for CPU startup ordering
which is not needed anyway.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3296
Introduce supprot for SMP to GICv3 and ITS drivers.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3299
An exception with an unknown reasion is the expected result of the
attempted execution of an instruction bit pattern that has no allocated
instruction.
Sponsored by: The FreeBSD Foundation
It seems we get EXCP_UNKNOWN from QEMU when executing zeroed memory.
Print a register dump here and signal illegal instruction. Also print
a register dump for other invalid exceptions, before panic.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3370
vm_offset_t pmap_quick_enter_page(vm_page_t m)
void pmap_quick_remove_page(vm_offset_t kva)
These will create and destroy a temporary, CPU-local KVA mapping of a specified page.
Guarantees:
--Will not sleep and will not fail.
--Safe to call under a non-sleepable lock or from an ithread
Restrictions:
--Not guaranteed to be safe to call from an interrupt filter or under a spin mutex on all platforms
--Current implementation does not guarantee more than one page of mapping space across all platforms. MI code should not make nested calls to pmap_quick_enter_page.
--MI code should not perform locking while holding onto a mapping created by pmap_quick_enter_page
The idea is to use this in busdma, for bounce buffer copies as well as virtually-indexed cache maintenance on mips and arm.
NOTE: the non-i386, non-amd64 implementations of these functions still need review and testing.
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: http://reviews.freebsd.org/D3013
When doing a data abort from userland it is possible to get
more than one data abort inside the same exception level.
Add an appropriate exception number to allow nesting of
data_abort handler for EL0.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3276
in savectx where it will be used to store the current state however will
pass in a pcb when vfp_save_state expected a thread pointer.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
unwind_frame function to read each stack frame until either the pc or stack
are no longer withing the kernel's address space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This is copied from the amd64 version with minor changes. These should be
merged into a single file as from a quick look there are other copies of
the same file in other parts of the tree.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
when trying to read data from outside the DMAP region. I expect this panic
to be from within uiomove_fromphys, which needs to grow support to support
such addresses.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation