Commit Graph

50 Commits

Author SHA1 Message Date
Alexander Kabaev
363b8ed74f Use callout_init_mtx on FreeBSD versions recent enough. This closes
the race where interrupt thread can complete the request for which
timeout has fired and while mpt_timeout has blocked on mpt_lock.

Do a best effort to keep 4.x ang Giant-locked configurartions
compiling still.

Reported by: ups
Reviewed by: scottl
2009-10-20 02:35:12 +00:00
Marius Strobl
7ee3780799 Make the whole initiator mode part of mpt(4) endian-clean,
specifically SPI controllers now also work in big-endian
machines and some conversions relevant for FC and SAS
controllers as well as support for ILP32 machines which all
were omitted in previous attempts are now also implemented.
The IOCTL-interface is intentionally left (and where needed
actually changed) to be completely little-endian as otherwise
we would have to add conversion code for every possible
configuration page to mpt(4), which didn't seem the right
thing to do, neither did converting only half of the user-
interface to the native byte order.
This change was tested on amd64 (SAS+SPI), i386 (SAS) and
sparc64 (SAS+SPI). Due to lack of the necessary hardware
the target mode code is still left to be made endian-clean.

Reviewed by:	scottl
MFC after:	1 month
2009-01-07 21:52:47 +00:00
Scott Long
942adee743 Don't force a reset at driver attach time. It doesn't work on some
adapters, apparently.
2008-04-03 14:39:48 +00:00
Scott Long
e955d4fd10 The MPT driver treats the "core" module with the same importance and
abstraction as the RAID and CAM modules, making it nearly impossible
for enough initialization to be done in time for the RAID module to
know whether to attach.  On top of this, no reset was being done on
the controller on attach, in violation of the spec.  Additionally,
the port enable step was being deferred to the end of the attach
process, long after it should have been done to ensure reliable
operation from the controller.  Fix all of these with a few hacks
to force the "attach" and "enable" steps of the core module early
on, and ensure that a reset and port enable also happens early on.
In the future, the driver needs to be refactored to eliminate the
core module abstraction, clean up withe reset/enable steps, and
defer event messages until all of the modules are available to
recieve them.
2008-03-31 21:54:05 +00:00
Scott Long
fee67c1a14 Ever since the module registration system was introduced to this driver,
it's been printing out scary messages about "Unhanded Event Notify Frame"
that are needlessly worrisome to users.  Change this warning to only print
out at an elevated debugging level.
2007-11-03 17:33:41 +00:00
Kevin Lo
976b010645 Spelling fix for interupt -> interrupt 2007-10-12 06:03:46 +00:00
Scott Long
9adc3a2dfb Move callout initialization to the proper spot. This prevents panics during
error recovery.

Approved by: re
Found by: kan
2007-08-14 19:17:35 +00:00
Scott Long
a490742913 Track an update in the MPI headers that was missed earlier. 2007-06-04 06:18:07 +00:00
Scott Long
1d558d6a15 mpt.c:
mpt.h:
	Add support for reading extended configuration pages.
mpt_cam.c:
	Do a top level topology scan on the SAS controller.  If any SATA
	device are discovered in this scan, send a passthrough FIS to set
	the write cache.  This is controllable through the following
	tunable at boot:

	hw.mpt.enable_sata_wc:
		-1 = Do not configure, use the controller default
		 0 = Disable the write cache
		 1 = Enable the write cache

	The default is -1.  This tunable is just a hack and may be
	deprecated in the future.

Turning on the write cache alleviates the write performance problems with
SATA that many people have observed.  It is not recommend for those who
value data reliability!  I cannot stress this strongly enough.  However,
it is useful in certain circumstances, and it brings the performence in line
with what a generic SATA controller running under the FreeBSD ATA driver
provides (and the ATA driver has had the WC enabled by default for years).
2007-06-03 23:13:05 +00:00
Matt Jacob
d0a68c2747 Make this driver MP safe and still be a multi-release driver.
Obtained from:	99% of the work done by Scott Long.
MFC after:	3 days
2007-05-05 20:18:24 +00:00
Matt Jacob
a2baed9764 (commented out) multipath fault injection code.
Some code to make diffs with RELENG_6 easier.
2007-01-05 22:49:05 +00:00
Matt Jacob
7185cd3625 PH! Forgot to do my cross-compile check. Also now rearranged things so
the ENDIAN defines are consistent between mpt.h and mpt.c.
2006-12-07 23:51:00 +00:00
Matt Jacob
0e0521a153 MFP4: principally to reapply tagged command support to FC and SAS cards. 2006-12-07 22:02:28 +00:00
Matt Jacob
a54067cc0e Fix a debug message which didn't quite get it right about data direction.
Fix things to use the LSI-Logic Fusion Library mask and shift names for
offset and sync, no matter how awkward they are, in preference to just
plain numbers.
2006-12-03 00:28:11 +00:00
John Birrell
3f970273b1 Add big endian support.
Submitted by:	scottl
Reviewed by:	mjacob
2006-11-15 21:46:36 +00:00
Matt Jacob
a7303be1a8 Create a 'ready' handler for each personality. The purpose of this handler
is to able to be called after *all* attach and enable events are done.

We establish a SYSINIT hook to call this handler. The current usage for it
is to add scsi target resources *after* all enables are done. There seems
to be some dependencies between different halves of a dual-port with respect
to target mode.

Put in more meaningful event messages for some events- in particular
QUEUE FULL events so we can see what the queue depth was when the
IOC sent us this message.

MFC after:	1 week
2006-09-07 23:08:21 +00:00
Matt Jacob
6621d786eb If we're in mpt_wait_req and the command times out,
mark it as timed out. Don't try and free the config
request for read_cfg_header that times out because
it's still active. Put in code for the config reply
handler that will then free up timed out requests.

Fix the FC_PRIMITIVE_SEND completion to not try
and free a command twice. Dunno how this possibly
could have been working for awhile.

MFC after:	2 weeks
2006-07-16 03:34:55 +00:00
Matt Jacob
b4c618c099 Fix config page writes to not strip out the attributes when you
actually go write the config page. This fixes the long standing
problem about updating NVRAM on Fibre Channel cards and seems
so far to not break SPI config page writes.

Put back role setting into mpt. That is, you can set a desired role
for mpt as a hint. On the next reboot, it'll pick that up and redo
the NVRAM settings appropriately and warn you that this won't take
effect until the next reboot. This saves people the step of having
to find a BIOS utilities disk to set target and/or initiator role
for the MPT cards.
2006-07-12 07:48:50 +00:00
Matt Jacob
9fe6d25444 Major Fixes:
Don't enable/disable I/O space except for SAS adapters.
  This fixes a problem with VMware 4.5 Workstation.

  Fix an egregious bug introduced to target mode so it actually
  will not panic when you first enable a lun.

Minor fixes:

  Take more infor from port facts and configuration pages.

MFC after:	1 week
2006-06-25 04:23:26 +00:00
Matt Jacob
5580ce963e More checkpointing on the way toward really (finally)
fixing speed negotiation.

Also fix the mpt_execute_req function to actually
match mpt_execute_req_a64. This may explain why
i386 users were having more grief.
2006-06-02 18:50:39 +00:00
Matt Jacob
ec5fe39d39 Add acknowledgements to LSI-Logic for support 2006-05-29 20:34:28 +00:00
Matt Jacob
1d79ca0e46 Work in progress toward fixing IM checked in after having
lost one set to a peninsula power failure last night. After
this, I can see both submembers and the raid volumes again,
but speed negotiation is still broken.

Add a mpt_raid_free_mem function to centralize the resource
reclaim and fixed a small memory leak.

Remove restriction on number of targets for systems with IM enabled-
you can have setups that have both IM volumes as well as other devices.

Fix target id selection for passthru and nonpastrhu cases.

Move complete command dumpt to MPT_PRT_DEBUG1 level so that just
setting debug level gets mostly informative albeit less verbose
dumping.
2006-05-27 17:26:57 +00:00
Matt Jacob
1043516d26 Remove handrolled raw dump of a request from
mpt_send_cmd and replace with a new debug function.
2006-05-26 05:41:14 +00:00
Matt Jacob
4f9f0449c6 Remove debounce code in mpt_intr. After some reflection
and watching a debounce followed by a timeout, I think
I'm forced to conclude that it was not a good idea.
2006-04-19 21:17:33 +00:00
Matt Jacob
5089bd63bd A large set of changes:
+ Add boatloads of KASSERTs and *really* check out more locking
issues (to catch recursions when we actually go to real locking
in CAM soon). The KASSERTs also caught lots of other issues like
using commands that were put back on free lists, etc.

+ Target mode: role setting is derived directly from port capabilities.
There is no need to set a role any more. Some target mode resources
are allocated early on (ELS), but target command buffer allocation
is deferred until the first lun enable.

+ Fix some breakages I introduced with target mode in that some commands
are *repeating* commands. That is, the reply shows up but the command
isn't really done (we don't free it). We still need to take it off the
pending list because when we resubmit it, bad things then  happen.

+ Fix more of the way that timed out commands and bus reset is done. The
actual TMF response code was being ignored.

+ For SPI, honor BIOS settings. This doesn't quite fix the problems we've
seen where we can't seem to (re)negotiate U320 on all drives but avoids
it instead by letting us honor the BIOS settings. I'm sure this is not
quite right and will have to change again soon.
2006-04-11 16:47:30 +00:00
Matt Jacob
33f3184660 Fix fat-fingered version define. 2006-04-01 19:49:55 +00:00
Matt Jacob
5e073106d5 Fix some of the previus changes 'better'.
There's something strange going on with async events. They seem
to be be treated differently for different Fusion implementations.
Some will really tell you when it's okay to free the request that
started them.  Some won't. Very disconcerting.

This is particularily bad when the chip (FC in this case) tells you
in the reply that it's not a continuation reply, which means you
can free the request that its associated with. However, if you do
that, I've found that additional async event replies come back for
that message context after you freed it. Very Bad Things Happen.

Put in a reply register debounce. Warn about out of range context
indices. Use more MPILIB defines where possible. Replace bzero with
memset. Add tons more KASSERTS. Do a *lot* more request free list
auditting and serial number usages. Get rid of the warning about
the short IOC Facts Reply.  Go back to 16 bits of context index.

Do a lot more target state auditting as well. Make a tag out
of not only the ioindex but the request index as well and worry
less about keeping a full serial number.
2006-04-01 07:12:18 +00:00
Matt Jacob
a529c6a2dc Correct bad format args. Interesting- the lines that generated
the error on sparc64 hadn't changed since the last checkin, pass
LINT on other platforms and mpt doesn't work on sparc64 anyway
and the tinderbox build didn't work for me in a cross build case
on my main build machine (which runs RELENG_6). Sigh. Still
need to try harder.
2006-03-26 07:16:17 +00:00
Matt Jacob
c87e3f833c Some fairly major changes to this driver.
A) Fibre Channel Target Mode support mostly works
(SAS/SPI won't be too far behind). I'd say that
this probably works just about as well as isp(4)
does right now. Still, it and isp(4) and the whole
target mode stack need a bit of tightening.

B) The startup sequence has been changed so that
after all attaches are done, a set of enable functions
are called. The idea here is that the attaches do
whatever needs to be done *prior* to a port being
enabled and the enables do what need to be done for
enabling stuff for a port after it's been enabled.

This means that we also have events handled by their
proper handlers as we start up.

C) Conditional code that means that this driver goes
back all the way to RELENG_4 in terms of support.

D) Quite a lot of little nitty bug fixes- some discovered
by doing RELENG_4 support. We've been living under Giant
*waaaayyyyy* too long and it's made some of us (me) sloppy.

E) Some shutdown hook stuff that makes sure we don't blow
up during a reboot (like by the arrival of a new command
from an initiator).

There's been some testing and LINT checking, but not as
complete as would be liked. Regression testing with Fusion
RAID instances has not been possible. Caveat Emptor.

Sponsored by: LSI-Logic.
2006-03-25 07:08:27 +00:00
Matt Jacob
9b7de73509 In mpt_complete_request_chain don't depend on somebody else to
remove the request from the TAILQ.
2006-03-17 04:52:27 +00:00
Matt Jacob
7a49a0d1fb Add a serial number for requests so we don't just depend on a request pointer
to try and do forensics on what has occurred.
2006-03-07 17:56:40 +00:00
Matt Jacob
1977cbd6cf turn some WARNs for unknown events into INFOs 2006-03-04 21:46:34 +00:00
Matt Jacob
29ae59edff Fix mpt_reset to try mpt_hard_reset more than once, and to try
mpt_soft_reset more than once. And to wait for MPT_DB_STATE_READY
twice. I mean, this is crucial- give the IOC a chance to get
ready.

If mpt_reset is called to reinit things, and we succeed, make
sure to re-enable interrupts. This is what has mostly led to
system lockup after having to hard reset the chip. Also, if
we think that interrupts aren't function in mpt_cam_timeout,
for goodness sake, turn them on again.

In read_cfg_header, return distinguishing errnos so the caller
can decide what's an error. It's *not* an error to fail to
read a RAID page from a non-RAID capable device like the FC929X.

Some whitespace fixes (removing spaces from ends of lines).
2006-02-28 07:44:50 +00:00
Matt Jacob
ca8ee7080f a) Delay for port enable to succeed should be 30 seconds (at least) for
*both* SAS and FC, not just SAS.

b) Don't tell the chip we want it to do FIFO signalling if we actually
don't set up the address where the FIFO signal is supposed to be written
(oops).
2006-02-26 07:44:31 +00:00
Matt Jacob
0b80d21bdf Role a microrev of the MPI Library in preparation for target mode work.
Make my portions of the license clearer.

Thank Chris Ellsworth for his support in getting a bunch of this done.
2006-02-25 07:45:54 +00:00
Matt Jacob
444dd2b669 Do initial cut of SAS HBA support. These controllers (106X) seem to support
automatically both SATA and SAS drives.  The async SAS event handling we catch
but ignore at present (so automagic attach/detach isn't hooked up yet).

Do 64 bit PCI support- we can now work on systems with > 4GB of memory.

Do large transfer support- we now can support up to reported chain depth, or
the length of our request area. We simply allocate additional request elements
when we would run out of room for chain lists.

Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms.
There were no RAID cards available for me to regression test.

The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
Scott Long
a3699bcaa6 Remove a couple of explicit memset(0) ops that were zeroing past the end of
an allocation.  This fixes the malloc 'use after free' panic on boot that
many were seeing.  It doesn't solve the problem of the allocations being
cached and then written past their bounds later.  That will take more work.

Submitted by: kan
2005-10-08 05:16:45 +00:00
Justin T. Gibbs
286e947fee Correct attribution in clause three to address the correct copyright
holders.  The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.

MFC: 1 day
2005-08-03 14:08:41 +00:00
Scott Long
b0a2fdee0d Massive overhaul of MPT Fusion driver:
o Add timeout error recovery (from a thread context to avoid
  the deferral of other critical interrupts).
o Properly recover commands across controller reset events.
o Update the driver to handle events and status codes that
  have been added to the MPI spec since the driver was
  originally written.
o Make the driver more modular to improve maintainability and
  support dynamic "personality" registration (e.g. SCSI Initiator,
  RAID, SAS, FC, etc).
o Shorten and simplify the common I/O path to improve driver
  performance.
o Add RAID volume and RAID member state/settings reporting.
o Add periodic volume resynchronization status reporting.
o Add support for sysctl tunable resync rate, member write cache
  enable, and volume transaction queue depth.

Sponsored by
----------------
Avid Technologies Inc:
	SCSI error recovery, driver re-organization, update of MPI library
	headers, portions of dynamic personality registration, and misc bug
	fixes.

Wheel Open Technologies:
	RAID event notification, RAID member pass-thru support, firmware
	upload/download support, enhanced RAID resync speed, portions
	of dynamic personality registration, and misc bug fixes.

Detailed Changes
================
mpt.c mpt_cam.c mpt_raid.c mpt_pci.c:
o Add support for personality modules.  Each module exports
  load, and unload module scope methods as well as probe, attach,
  event, reset, shutdown, and detach  per-device instance
  methods

mpt.c mpt.h mpt_pci.c:
o The driver now associates a callback function (via an
  index) with every transaction submitted to the controller.
  This allows the main interrupt handler to absolve itself
  of any knowledge of individual transaction/response types
  by simply calling the callback function "registered" for
  the transaction.  We use a callback index instead of a
  callback function pointer in each requests so we can
  properly handle responses (e.g. event notifications)
  that are not associated with a transaction.  Personality
  modules dynamically register their callbacks with the
  driver core to receive the callback index to use for their
  handlers.

o Move the interrupt handler into mpt.c.  The ISR algorithm
  is bus transport and OS independent and thus had no reason
  to be in mpt_pci.c.

o Simplify configuration message reply handling by copying
  reply frame data for the requester and storing completion
  status in the original request structure.

o Add the mpt_complete_request_chain() helper method and use
  it to implement reset handlers that must abort transactions.

o Keep track of all pending requests on the new
  requests_pending_list in the softc.

o Add default handlers to mpt.c to handle generic event
  notifications and controller reset activities.  The event
  handler code is largely the same as in the original driver.
  The reset handler is new and terminates any pending transactions
  with a status code indicating the controller needs to be
  re-initialized.

o Add some endian support to the driver.  A complete audit is
  still required for this driver to have any hope of operating
  in a big-endian environment.

o Use inttypes.h and __inline.  Come closer to being style(9)
  compliant.

o Remove extraneous use of typedefs.

o Convert request state from a strict enumeration to a series
  of flags.  This allows us to, for example, tag transactions
  that have timed-out while retaining the state that the
  transaction is still in-flight on the controller.

o Add mpt_wait_req() which allows a caller to poll or sleep
  for the completion of a request.  Use this to simplify
  and factor code out from many initialization routines.
  We also use this to sleep for task management request
  completions in our CAM timeout handler.

mpt.c:
o Correct a bug in the event handler where request structures were
  freed even if the request reply was marked as a continuation
  reply. Continuation replies indicate that the controller still owns
  the request and freeing these replies prematurely corrupted
  controller state.

o Implement firmware upload and download. On controllers that do
  not have dedicated NVRAM (as in the Sun v20/v40z), the firmware
  image is downloaded to the controller by the system BIOS. This
  image occupies precious controller RAM space until the host driver
  fetches the image, reducing the number of concurrent I/Os the
  controller can processes. The uploaded image is used to
  re-program the controller during hard reset events since the
  controller cannot fetch the firmware on its own. Implementing this
  feature allows much higher queue depths when RAID volumes
  are configured.

o Changed configuration page accessors to allow threads to sleep
  rather than busy wait for completion.

o Removed hard coded data transfer sizes from configuration page
  routines so that RAID configuration page processing is possible.

mpt_reg.h:
o Move controller register definitions into a separate file.

mpt.h:
o Re-arrange includes to allow inlined functions to be
  defined in mpt.h.

o Add reply, event, and reset handler definitions.

o Add softc fields for handling timeout and controller
  reset recovery.

mpt_cam.c:
o Move mpt_freebsd.c to mpt_cam.c.  Move all core functionality,
  such as event handling, into mpt.c leaving only CAM SCSI
  support here.

o Revamp completion handler to provide correct CAM status for
  all currently defined SCSI MPI message result codes.

o Register event and reset handlers with the MPT core.  Modify
  the event handler to notify CAM of bus reset events.  The
  controller reset handler will abort any transactions that
  have timed out.  All other pending CAM transactions are
  correctly aborted by the core driver's reset handler.

o Allocate a single request up front to perform task management
  operations.  This guarantees that we can always perform a
  TMF operation even when the controller is saturated with other
  operations.  The single request also serves as a perfect
  mechanism of guaranteeing that only a single TMF is in flight
  at a time - something that is required according to the MPT
  Fusion documentation.

o Add a helper function for issuing task management requests
  to the controller.  This is used to abort individual requests
  or perform a bus reset.

o Modify the CAM XPT_BUS_RESET ccb handler to wait for and
  properly handle the status of the bus reset task management
  frame used to reset the bus.  The previous code assumed that
  the reset request would always succeed.

o Add timeout recovery support.  When a timeout occurs, the
  timed-out request is added to a queue to be processed by
  our recovery thread and the thread is woken up.  The recovery
  thread processes timed-out command serially, attempting first
  to abort them and then falling back to a bus reset if an
  abort fails.

o Add calls to mpt_reset() to reset the controller if any
  handshake command, bus reset attempt or abort attempt
  fails due to a timeout.

o Export a secondary "bus" to CAM that exposes all volume drive
  members as pass-thru devices, allowing CAM to perform proper
  speed negotiation to hidden devices.

o Add a CAM async event handler tracking the AC_FOUND_DEVICE event.
  Use this to trigger calls to set the per-volume queue depth once
  the volume is fully registered with CAM. This is required to avoid
  hitting firmware limits on volume queue depth.  Exceeding the
  limit causes the firmware to hang.

mpt_cam.h:
o Add several helper functions for interfacing to CAM and
  performing timeout recovery.

mpt_pci.c:
o Disable interrupts on the controller before registering and
  enabling interrupt delivery to the OS.  Otherwise we risk
  receiving interrupts before the driver is ready to receive
  them.

o Make use of compatibility macros that allow the driver to
  be compiled under 4.x and 5.x.

mpt_raid.c:
o Add a per-controller instance RAID thread to perform settings
   changes and query status (minimizes CPU busy wait loops).

o Use a shutdown handler to disable "Member Write Cache Enable"
  (MWCE) setting for RAID arrays set to enable MWCE During Rebuild.

o Change reply handler function signature to allow handlers to defer
  the deletion of reply frames. Use this to allow the event reply
  handler to queue up events that need to be acked if no resources
  are available to immediately ack an event. Queued events are
  processed in mpt_free_request() where resources are freed. This
  avoids a panic on resource shortage.

o Parse and print out RAID controller capabilities during driver probe.

o Define, allocate, and maintain RAID data structures for volumes,
  hidden member physical disks and spare disks.

o Add dynamic sysctls for per-instance setting of the log level, array
  resync rate, array member cache enable, and volume queue depth.

mpt_debug.c:
o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on
  a particular log level to aid in tracking down driver issues.

o Add mpt_decode_value() which parses the bits in an integer
  value based on a parsing table (mask, value, name string, tuples).

mpilib/*:
o Update mpi library header files to latest distribution from LSI.

Submitted by: gibbs
Approved by: re
2005-07-10 15:05:39 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
David E. O'Brien
9295c6c555 Fix where my automated script blew the SCM ID format conversion. 2004-08-21 17:44:57 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Matt Jacob
7fed69ee80 Update MPILIB from code received from LSI. Make changes in the rest of
the driver based upon some somewhat gratuitous name changes.
2003-06-03 17:47:48 +00:00
Matt Jacob
301472c20b Code cleanup: use mpt_prt instead of device_printf. 2002-09-24 21:33:43 +00:00
Matt Jacob
7dec90bcf9 Parameterize MPT_MAX_REQUESTS based upon device type (FC has Global Credits
of 1024- Ultra4 256). Rename 'requests' tag to 'request_pool' for clarity.
Make sure we do correct xpt_freeze_simq/CAM_RELEASE_SIMQ if we run out
of chip resources.

MFC after:	6 days
2002-09-23 19:41:10 +00:00
Matt Jacob
0424fb537e When freeing a request, zero out the sequence number.
Define the CFG_DAGA_OFF offset as 128 bytes instead of 40- gives us
a more reasonable headroom.

When reading a config page, zero out the entire request area- not just
the length of the request. This is because we cleverly (cheezily) return
configuration data back into the allocated request area, so it's nice
to make sure we start with a clean area to write on.

MFC after:	1 week
2002-09-23 05:14:02 +00:00
Matt Jacob
ce68dae5d6 Fix things so that:
a) we don't believe what the board tells us all the time (if the BIOS
hasn't run, port page 2 and port page 0 tend to be garbage)

b) add the missing code to set parameters for the SPI cards.

MFC after:	0 days
2002-09-01 23:07:09 +00:00
Matt Jacob
90f62fd23f Do some minor cleanups found during backport to RELENG_4. 2002-08-23 06:56:31 +00:00
Matt Jacob
7104aeef01 A chunk of cleanup, both stylistic and substantive.
We now also read configuration information for the SCSI cards- this allows
us to try and say what the speed settings now are.

Start, but not yet complete, the process of reorgs && #defines so that we
can backport to RELENG_4 pretty soon.
2002-08-20 23:04:08 +00:00
Matt Jacob
9b63136347 Add support for the LSI-Logic Fusion/MP architecture.
This is an architecture that present a thing message passing interface
to the OS. You can query as to how many ports and what kind are attached
and enable them and so on.

A less grand view is that this is just another way to package SCSI (SPI or
FC) and FC-IP into a one-driver interface set.

This driver support the following hardware:

LSI FC909:	Single channel, 1Gbps, Fibre Channel (FC-SCSI only)
LSI FC929:	Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only)
LSI 53c1020:	Single Channel, Ultra4 (320M) (Untested)
LSI 53c1030:	Dual Channel, Ultra4 (320M)

Currently it's in fair shape, but expect a lot of changes over the
next few weeks as it stabilizes.

Credits:

The driver is mostly from some folks from Jeff Roberson's company- I've
been slowly migrating it to broader support that I it came to me as.

The hardware used in developing support came from:

	FC909: LSI-Logic, Advansys (now Connetix)
	FC929: LSI-Logic
	53c1030: Antares Microsystems (they make a very fine board!)

MFC after:	3 weeks
2002-08-11 23:34:20 +00:00