Commit Graph

2424 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
b6e3627ecb typo. 2006-05-27 04:40:41 +00:00
Poul-Henning Kamp
a67173a28a Aling to new console and gdb_port semantics 2006-05-26 13:33:28 +00:00
Marius Strobl
136eda1dc3 - Add C-bus and ISA front-ends for le(4) so it can actually replace
lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP
  network cards as lnc(4) did and additionally a couple of PNP ones.
  Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S
  and is untested due to lack of such hardware, but given that's it's
  based on the respective lnc(4) and not too different from the ISA
  front-end it should be highly likely to work.
- Remove the descriptions of le(4), which where converted from lnc(4),
  from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common
  one in sys/conf/NOTES.
2006-05-17 21:25:23 +00:00
Marius Strobl
dcaf1a3834 - As only the PCI front-end of le(4) is common to all platforms move its
entry to the PCI NICs section so it's in the same spot in all GENERIC
  config files.
- Add a note to the description of pcn(4) informing that is has precedence
  over le(4).
2006-05-17 20:44:01 +00:00
Poul-Henning Kamp
f6ce2a64f7 Send the pcvt(4) driver off to retirement. 2006-05-17 09:33:15 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Ruslan Ermilov
155d9f6a98 Kill more references to lnc(4).
Submitted by:	grep(1)
2006-05-16 12:15:39 +00:00
Yoshihiro Takahashi
7d11a60e60 Switch from the lnc driver to the le driver. But C-NET(98)S support is
dropped.
2006-05-15 11:15:34 +00:00
Poul-Henning Kamp
5405ab4889 Clean out sysctl machdep.* related defines.
The cmos clock related stuff should really be in MI code.
2006-05-11 17:29:25 +00:00
Doug Ambrisko
32397ce071 Add in linsysfs. A linux 2.6 like sys filesystem to pacify the Linux
LSI MegaRAID SAS utility.

Sponsored by:		IronPort Systems
Man page help from:	brueffer
2006-05-09 22:27:01 +00:00
Yoshihiro Takahashi
ecad9def1d Remove unneeded include. 2006-05-08 12:05:04 +00:00
Yoshihiro Takahashi
56c134bef1 - Move defines for PC-98 machine type from pc98/cbus/cbus.h into
pc98/pc98/pc98_machdep.h.
- Fix PC98_SYSTEM_PARAMETER_SIZE.
- Remove unused defines.
2006-05-08 12:03:58 +00:00
Yoshihiro Takahashi
9f61d3129a Add the ath and the wlan crypto support. 2006-05-08 11:55:57 +00:00
Marcel Moolenaar
64220a7e28 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
Marcel Moolenaar
cea4d8752f o Move ISA specific code from ppc.c to ppc_isa.c -- a bus front-
end for isa(4).
o  Add a seperate bus frontend for acpi(4) and allow ISA DMA for
   it when ISA is configured in the kernel. This allows acpi(4)
   attachments in non-ISA configurations, as is possible for ia64.
o  Add a seperate bus frontend for pci(4) and detect known single
   port parallel cards.
o  Merge PC98 specific changes under pc98/cbus into the MI driver.
   The changes are minor enough for conditional compilation and
   in this form invites better abstraction.
o  Have ppc(4) usabled on all platforms, now that ISA specifics
   are untangled enough.
2006-04-24 23:31:51 +00:00
Yoshihiro Takahashi
c64cc84500 Add minidump.h for pc98. 2006-04-21 12:13:59 +00:00
Yoshihiro Takahashi
23fc45b550 MFi386: revision 1.625. 2006-04-21 12:12:21 +00:00
John Baldwin
39092e79ed Don't allow userland to set hardware watch points on kernel memory at all.
Previously, we tried to allow this only for root.  However, we were calling
suser() on the *target* process rather than the current process.  This
means that if you can ptrace() a process running as root you can set a
hardware watch point in the kernel.  In practice I think you probably have
to be root in order to pass the p_candebug() checks in ptrace() to attach
to a process running as root anyway.  Rather than fix the suser(), I just
axed the entire idea, as I can't think of any good reason _at all_ for
userland to set hardware watch points for KVM.

MFC after:	3 days
Also thinks hardware watch points on KVM from userland are bad:	bde, rwatson
2006-03-14 16:13:55 +00:00
Yoshihiro Takahashi
ed40c5a34d MFi386: revision 1.1220. 2006-03-04 07:31:58 +00:00
John Baldwin
57fb5e6097 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
Yoshihiro Takahashi
d41b34d1cd MFi386: revision 1.622.
> Clear carry flag in get_mcontext so that setcontext does not
> return a bogus error.

MFC after:	3 days
2006-02-09 11:50:22 +00:00
Yoshihiro Takahashi
2afd016ce3 The asr driver was moved to NOTES for i386. So 'nodevice asr' is not
needed anymore.
2006-02-09 11:43:13 +00:00
Yoshihiro Takahashi
df55e78b6f MFi386: Enable the ce(4). 2006-02-02 11:14:13 +00:00
Poul-Henning Kamp
d3e64681d6 Move the old BSD4.3 tty compatibility from (!BURN_BRIDGES && COMPAT_43)
to COMPAT_43TTY.

Add COMPAT_43TTY to NOTES and */conf/GENERIC

Compile tty_compat.c only under the new option.

Spit out
	#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
2006-01-10 09:19:10 +00:00
Warner Losh
d5e61c97a6 By popular demand, move __HAVE_ACPI and __PCI_REROUTE_INTERRUPT into
param.h.  Per request, I've placed these just after the
_NO_NAMESPACE_POLLUTION ifndef.  I've not renamed anything yet, but
may since we don't need the __.

Submitted by: bde, jhb, scottl, many others.
2006-01-09 06:05:57 +00:00
Warner Losh
501755f4f6 Define __HAVE_ACPI and/or __PCI_REROUTE_INTERRUPT, as appropriate for
each platform.  These will be used in the pci code in preference to
the complicated #ifdefs we have there now.
2006-01-01 20:59:28 +00:00
Yoshihiro Takahashi
3b52aaddac MFi386: revision 1.621 2005-12-26 12:46:36 +00:00
Yoshihiro Takahashi
d0873c5d1d Fix build error. 2005-12-23 12:14:55 +00:00
John Baldwin
b439e431bf Tweak how the MD code calls the fooclock() methods some. Instead of
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly.  In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures.  Basically,
  all the archs were taking a trapframe and converting it into a clockframe
  one way or another.  Now they can just extract the PC and usermode values
  directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
  accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
  the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
  timecounter, call hardclock() directly.  This removes an extra
  conditional check from every clock interrupt on Alpha on the BSP.
  There is probably room for even further pruning here by changing Alpha
  to use the simplified timecounter we use on x86 with the lapic timer
  since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
  is false, so add a KASSERT() to that affect and remove a condition
  to slightly optimize the non-lapic case.
- Change prototypeof  arm_handler_execute() so that it's first arg is a
  trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.

Tested on:	alpha, amd64, arm, i386, ia64, sparc64
Reviewed by:	bde (mostly)
2005-12-22 22:16:09 +00:00
Yoshihiro Takahashi
6a901529f5 Enable the cs and disable the amdsmb and nfsmb on pc98. 2005-12-22 16:16:42 +00:00
Warner Losh
b0493a9984 Move device 'cs' into i386/pc98 specific NOTES. It is broken on ppc
because it uses i386 specific calls.  Maybe it could be added to
amd64, but I'm not so sure it would work there so I've not added it
there.
2005-12-20 23:00:11 +00:00
Yoshihiro Takahashi
b8a8ce140f Merged from sys/dev/sio/sio.c revision 1.463. 2005-12-18 11:16:31 +00:00
Yoshihiro Takahashi
944b597264 Switch MACHINE to "pc98" on FreeBSD/pc98.
Add copyright.

Approved by:	FreeBSD/pc98 development team.
2005-12-08 12:35:12 +00:00
Ruslan Ermilov
5219ffdbe0 cpp(1) only understand integer arithmetical expressions, so
_MACHINE == i386 test always succeeds, even on non-i386 (both
sides of expressions become 0).  Remove the comment since
_MACHINE and _MACHINE_ARCH are going away.
2005-12-06 13:22:14 +00:00
Ruslan Ermilov
44e09d2fa2 Fix -Wundef warnings from compiling GENERIC and LINT kernels of
all architectures.
2005-12-06 11:19:37 +00:00
Ruslan Ermilov
342ed5d948 Fix -Wundef warnings found when compiling i386 LINT, GENERIC and
custom kernels.
2005-12-05 11:58:35 +00:00
Yoshihiro Takahashi
54586e49a3 MFi386: revision 1.1215 (add savagedrm). 2005-11-30 11:58:01 +00:00
Ruslan Ermilov
6646524f34 - Allow duplicate "machine" directives with the same arguments.
- Move existing "machine" directives to DEFAULTS.
2005-11-27 23:17:00 +00:00
Ruslan Ermilov
1a581012df Add missing "struct" in i386/i386/machdep.c,v 1.497 by deischen@. 2005-11-24 08:16:18 +00:00
John Baldwin
1dab802e37 Garbage collect machine/smptests.h now that it is empty and no longer used. 2005-11-22 22:55:48 +00:00
John Baldwin
7417e80b4e Don't enable PUC_FASTINTR by default in the source. Instead, enable it
via the DEFAULTS kernel configs.  This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.

I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
2005-11-21 20:22:35 +00:00
Yoshihiro Takahashi
643d537fcd MFi386: Remove obsolete options. 2005-11-09 12:26:37 +00:00
Yoshihiro Takahashi
4cf092a1fa Move the isa, npx, mem and io devices and the PC98 option from GENERIC
into DEFAULTS.
2005-10-28 15:30:51 +00:00
Ruslan Ermilov
c9003bc7fa Catch up with new interrupt handling code. 2005-10-26 06:44:59 +00:00
John Baldwin
58553b9925 Rename the KDB_STOP_NMI kernel option to STOP_NMI and make it apply to all
IPI_STOP IPIs.
- Change the i386 and amd64 MD IPI code to send an NMI if STOP_NMI is
  enabled if an attempt is made to send an IPI_STOP IPI.  If the kernel
  option is enabled, there is also a sysctl to change the behavior at
  runtime (debug.stop_cpus_with_nmi which defaults to enabled).  This
  includes removing stop_cpus_nmi() and making ipi_nmi_selected() a
  private function for i386 and amd64.
- Fix ipi_all(), ipi_all_but_self(), and ipi_self() on i386 and amd64 to
  properly handle bitmapped IPIs as well as IPI_STOP IPIs when STOP_NMI is
  enabled.
- Fix ipi_nmi_handler() to execute the restart function on the first CPU
  that is restarted making use of atomic_readandclear() rather than
  assuming that the BSP is always included in the set of restarted CPUs.
  Also, the NMI handler didn't clear the function pointer meaning that
  subsequent stop and restarts could execute the function again.
- Define a new macro HAVE_STOPPEDPCBS on i386 and amd64 to control the use
  of stoppedpcbs[] and always enable it for i386 and amd64 instead of
  being dependent on KDB_STOP_NMI.  It works fine in both the NMI and
  non-NMI cases.
2005-10-24 21:04:19 +00:00
Poul-Henning Kamp
733634738e Eliminate two unused arguments to ttycreate(). 2005-10-16 20:22:56 +00:00
Yoshihiro Takahashi
cb614592cf Reduce diffs from i386/i386/machdep.c 2005-10-16 12:33:14 +00:00
John Baldwin
4fdd2813ff Merge over the remaining changes from i386 of the ksiginfo_t changes so
that this compiles.

Pointy hat to:	davidxu
2005-10-14 22:03:39 +00:00
John Baldwin
021eda1d85 Remove the sx(4) driver at the request of the author. The author
originally wrote it for 4.x and hasn't really had the time to fully update
it to 5.x and later.  Also, the author doesn't use the hardware anymore as
well.  If someone does need this driver they can always resurrect it from
the Attic.

Requested by:	Frank Mayhar frank at exit dot com
2005-10-14 18:24:58 +00:00
David Xu
9104847f21 1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most
changes in MD code are trivial, before this change, trapsignal and
   sendsig use discrete parameters, now they uses member fields of
   ksiginfo_t structure. For sendsig, this change allows us to pass
   POSIX realtime signal value to user code.

2. Remove cpu_thread_siginfo, it is no longer needed because we now always
   generate ksiginfo_t data and feed it to libpthread.

3. Add p_sigqueue to proc structure to hold shared signals which were
   blocked by all threads in the proc.

4. Add td_sigqueue to thread structure to hold all signals delivered to
   thread.

5. i386 and amd64 now return POSIX standard si_code, other arches will
   be fixed.

6. In this sigqueue implementation, pending signal set is kept as before,
   an extra siginfo list holds additional siginfo_t data for signals.
   kernel code uses psignal() still behavior as before, it won't be failed
   even under memory pressure, only exception is when deleting a signal,
   we should call sigqueue_delete to remove signal from sigqueue but
   not SIGDELSET. Current there is no kernel code will deliver a signal
   with additional data, so kernel should be as stable as before,
   a ksiginfo can carry more information, for example, allow signal to
   be delivered but throw away siginfo data if memory is not enough.
   SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
   not be caught or masked.
   The sigqueue() syscall allows user code to queue a signal to target
   process, if resource is unavailable, EAGAIN will be returned as
   specification said.
   Just before thread exits, signal queue memory will be freed by
   sigqueue_flush.
   Current, all signals are allowed to be queued, not only realtime signals.

Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
2005-10-14 12:43:47 +00:00