- Perform final decryption and write decrypted data in case of non-block aligned
input data;
- Use strlcpy(3) instead of strncpy(3) to verify if paths aren't too long;
- Check errno after calling unlink(2) instead of calling stat(2) in order to
verify if a decrypted core was created by a child process;
- Free dumpkey.
Reported by: Coverity, cem, pfg
Suggested by: cem
CID: 1366936, 1366942, 1366951, 1366952
Approved by: pjd (mentor)
wdc cap-diag Capture diagnostic data from drive
wdc drive-log Capture drive history data from drive
wdc get-crash-dump Retrieve firmware crash dump from drive
r312992 removed RESTARTCMD_WITH_ARG for @RESTARTCMD something@ but
reverted the sed to be '@RESTARTCMD \(.*\)@' and RESTARTCMD= to be
the value of RESTARTCMD_WITH_ARG.
Submitted by: Guy Yur
x_MFC with: r312992
MAXPHYS bytes of data, the I/O would require MAXPHYS + PAGE_SIZE worth
of pages to do the I/O and we'd hit an assertion in
vm_fault_quick_hold_pages unless MAXPHYS was larger than 1M +
PAGE_SIZE.
openresolv: update to version 3.9.0.
It is now possible to drop the _WITH_ARG vars thanks to a change to the
pdns_recursor upstreamed by Guy Yur.
MFC after: 3 weeks
overwrites an existing file rather than removing it and creating a
new file. If the old and new version of the file both have extended
attributes and the extended attributes of the two versions of the
file are different, the result is that the new file ends up with
the union of the extended attributes of the old and new files.
To get the behavior of replacing the extended attributes rather
than augmenting them requires explicitly removing the old attributes
and then adding the new ones.
To get this behavior, the old file must be unlinked (which clears
out the old extended attributes). Then the new file of the same
name must be created and the new extended attributes added to it.
This behavior can be obtained by specifying the -u flag when running
restore. Rather than defaulting the -u option to on and possibly
breaking existing scripts using restore, this change simply notes
in the restore.8 manual page that the -u flag is recommended when
using restore on filesystems that contain extended attributes.
PR: 216127
Reported by: dewayne at heuristicsystems.com.au
Differential Revision: https://reviews.freebsd.org/D9208
CID 1229913 Fix output of "camcontrol persist -i report_capabilities".
The reported Persistent Reservation Types were wrong in all
cases.
CID 1356029 Annotate the code so Coverity will know that this is a false
positive.
CID 1366830 Fix a memory leak in "camcontrol timestamp -s"
CID 1366832 Fix a segfault that could be caused by bad drive firmware
Also, fix the man page entry for the "camcontrol epc state" command to match
what the code does.
Reviewed by: ken, wblock
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9239
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.
- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.
- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().
- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.
- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.
- How rate limiting works:
1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.
2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.
3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.
4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.
Reviewed by: wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision: https://reviews.freebsd.org/D3687
Sponsored by: Mellanox Technologies
MFC after: 3 months
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Previously code ignored resid field and returned extra zeroes in case of
data underflow. Now it returns only real bytes received from target.
MFC after: 2 weeks
If our buffer is too small, we may receive part of the page, and should
not try read/write past the end of the buffer.
Reported by: Coverity
CID: 1368374, 1368375
MFC after: 1 week
This is very preliminary and mostly enough for me (with other patches)
to work on VHT support.
It adds:
* VHT20, VHT40 and VHT80 regulatory/band awareness
* VHT20, VHT40 and VHT80 channel configuration / population
* Parses vht channel specifications (eg ifconfig wlan0 create wlandev athp0 wlanmode monitor channel 36:vht/80)
* Configuration of VHT, VHT40, VHT80, VHT80+80, VHT160 channel
width (IEEE80211_FVHT_VHT* flags in net80211)
TODO:
* No VHT80+80 or VHT160 channels yet - I don't yet have hardware, and I'm
not yet sure how to support/populate VHT80+80 channels.
* No, I won't update the manpage until this is "more done", lest someone
tries using vht and gets upset with me.
* No, I won't commit the regulatory database I'm testing with, so you'll
just end up with no VHT channels ever populated. Which is good, as there
isn't an 11ac driver in-tree yet to try it with.
struct ip in ping(8):
sbin/ping/ping.c:1684:53: error: taking address of packed member
'ip_src' of class or structure 'ip' may result in an unaligned pointer
value [-Werror,-Waddress-of-packed-member]
(void)printf(" %s ", inet_ntoa(*(struct in_addr *)&ip->ip_src.s_addr));
^~~~~~~~~~~~~~~~~
sbin/ping/ping.c:1685:53: error: taking address of packed member
'ip_dst' of class or structure 'ip' may result in an unaligned pointer
value [-Werror,-Waddress-of-packed-member]
(void)printf(" %s ", inet_ntoa(*(struct in_addr *)&ip->ip_dst.s_addr));
^~~~~~~~~~~~~~~~~
MFC after: 3 days
The offending code has been dead ever since the import from OpenBSD in
r195805. OpenBSD later deleted that entire function.
Reported by: Coverity
CID: 500059
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
is a 32-bit socklen_t, do_get3() passes the kernel to access the wrong
32-bit half on big-endian LP64 machines when simply casting the 64-bit
size_t optlen to a socklen_t pointer.
While at it and given that the intention of do_get3() apparently is to
hide/wrap the fact that socket options are used for communication with
ipfw(4), change the optlen parameter of do_set3() to be of type size_t
and as such more appropriate than uintptr_t, too.
MFC after: 3 days
In this specific case the src address can be set to any, which was not
accepted prior to this commit.
pfSense bug report: https://redmine.pfsense.org/issues/6985
Reviewed by: kp
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
The primary purpose is to call nmount() in a loop with new iovec's so
free_iovec takes arguments by reference and resets their values.
Reviewed by: cem
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8513
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
This is imported from NetBSD. The author--Joerg Sonnenberger--agreed
to apply a two-clause BSD license, just so the license was clear.
This source tree location matches NetBSD, and is the first place someone
might look for such a tool.
Obtained from: Joerg Sonnenberger via NetBSD
MFC after: 3 days
Sponsored by: Dell EMC
This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
drives, but is a SPC (SCSI Primary Commands) command, and may be found
on any device that speaks SCSI.
The new camcontrol timestamp subcommand allows getting the current device
time or setting the time to the current system time or any arbitrary time.
sbin/camcontrol/Makefile:
Add timestamp.c.
sbin/camcontrol/camcontrol.8:
Document the new timestamp subcommand.
sbin/camcontrol/camcontrol.c:
Add the timestamp subcommand to camcontrol.
sbin/camcontrol/camcontrol.h:
Add the timestamp() function prototype.
sbin/camcontrol/timestamp.c:
Timestamp setting and reporting functionality.
sys/cam/scsi/scsi_all.c:
Add two new CCB building functions, scsi_set_timestamp() and
scsi_report_timestamp(). Also, add a new helper function,
scsi_create_timestamp().
sys/cam/scsi/scsi_all.h:
Add CDB and parameter data for the the set and report timestamp
commands.
Add function declarations for the new CCB building and helper
functions.
Submitted by: Sam Klopsch
Sponsored by: Spectra Logic
MFC After: 2 weeks
It is quite specific mode of operation without storing on-disk metadata.
It can be useful in some cases in combination with some external control
tools handling mirror creation and disks hot-plug.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
the BIOCSETIF ioctl.
The kernel always copies an entire struct ifreq and IPv4 addresses will
always fit in an ifreq.
On systems with pointers larger than 64-bits, the computed size will be
less than the size of struct ifreq, potentially resulting in the kernel
attempting to copyin memory from outside the allocation.
Reviewed by: jhb
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8445
and uses TCP for the Unmount RPC if the mount is over TCP.
Without this patch, umount does an Unmount RPC over UDP for all NFS mounts.
Suggested by: cperciva
Reviewed by: cperciva
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8503
instead. Since we're little endian, we can get away with it. Also,
since the counters in quesitons would require billions of iops for
tens of billions of seconds to overflow, and since such data rates are
unlikely for people using i386 for a while, that's OK. The fastest
cards today can't do even a million IOPs.
Noticed by: dim@
Sponsored by: Netflix, Inc
it in human readable form. Include a pointer to the public spec that
was followed to implement this in the code. Samsung also implements
page 0xca on some of their drives, but the format is slighly
different, so the code skips printing zero keys. Samsung's log page
has additional, unknown data after the end of Intel defined data which
isn't displayed.
Supported by: Netfix, Inc
number is printed, even though you'd need like a billion IOPs for a 10
billion seconds to overflow the 64-bit counters (~300 years).
Sponsored by: Netflix, Inc
are valid or not. While many pages are reserved in the standard, that
doesn't make them invalid and future versions of the standard may
define then.
Sponsored by: Netflix, Inc
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
Currently, '/etc/rc.d/swaplate stop' removes all swap devices. This can be
very slow and may not even be possible if there is a lot of swap space in
use. However, removing swap devices is only needed for late swap devices
that may depend on daemons that subsequent shutdown steps stop. Normal swap
devices such as hard disk partitions will remain available throughout the
shutdown process and need not be removed.
In swapoff, interpret -aL to remove late swap devices only, and use this in
etc/rc.d/swaplate. The meaning of -aL in swapon remains unchanged (add all
swap devices, both normal and late).
PR: 187081
Reviewed by: wblock (man page only), ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8126
In r307684, I changed rescan_or_reset_bus() to bzero stack-allocated CCBs
before sending them to the kernel because there was stack garbage in there
that wound up meaning that bogus CCB flags were set.
While this fixed the 'camcontrol rescan all' case (XPT_DEV_MATCH CCBs were
failing previously), it broke the 'camcontrol rescan 0' (or any other
number) case when INVARIANTS are turned on. Rescanning a single bus
reliably produced an assert in cam_periph_runccb():
panic: cam_periph_runccb: ccb=0xfffff80044ffe000, func_code=0x708, flags=0xffffdde0
The flags values don't make sense from the code. Changing the CCBs in
rescan_or_reset_bus() from stack to heap allocated avoids the problem.
It would be better to understand why userland stack allocated CCBs don't
work properly, since there may be other code that breaks if stack allocated
CCBs don't work.
sbin/camcontrol/camcontrol.c:
In rescan_or_reset_bus(), allocate the CCBs using malloc(3) instead
of on the stack to avoid an assertion in cam_periph_runccb().
MFC after: 3 days
Sponsored by: Spectra Logic
the header. Otherwise stack garbage can lead to random flags getting set.
This showed up as 'camcontrol rescan all' failing with EINVAL because the
address type wasn't CAM_DATA_VADDR.
sbin/camcontrol/camcontrol.c:
In rescan_or_reset_bus(), bzero the stack-allocated CCBs before
use instead of clearing the body.
MFC after: 3 days
Sponsored by: Spectra Logic
Ignore the ECN bits on 'tos' and 'set-tos' and allow to use
DCSP names instead of having to embed their TOS equivalents
as plain numbers.
Obtained from: OpenBSD
Sponsored by: OPNsense
Differential Revision: https://reviews.freebsd.org/D8165
r301059 accidently introduced a subtle change for point to point interfaces
where an extra space is inserted before the netmask. This can cause issues
for scripts that parse ifconfig output.
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: hiren
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8199
shell, ensure that we do sleep for at least the specified time, in
presence of signals.
Interrupted sleep(3) is followed by _exit(), which might cause 'Going
nowhere without my init' panic if init(8) exits before the reboot(2)
really started, or before SIGTSTP stopped init(8) (both events are
initiated by the parallel reboot(8) operation).
I do not see other calls to sleep(STALL_TIMEOUT) as having the same
disasterous consequences and kept them as is until the similar change
is proven required.
Reported and tested by: Andy Farkas <chuzzwassa@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
A premature optimization lead to caching a native-sector sized memory
allocation. If the program examined a 512 byte sector disk, then a 4096
byte sector disk, the program would overrun the cached 512 byte buffer.
Just remove the optimization to fix the bug. This was introduced with the 4Kn
dump support in r298076.
Reported by: markj
Reviewed by: markj, rpokala
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8162
Move sentence to a new line as advised by igor.
PR: 212474
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
I was unable to pin point the exact version of Mach the fdisk utility appeared as I could not find documentation older than version 2.5 & no source code or repo history.
fdisk utility appears as a separate utility[3] in v2.5. Due to this, I have avoided stating the exact version fdisk first appeared in Mach.
Add authors section.
[1] https://groups.google.com/d/topic/comp.unix.bsd/Hhi45vAHxDg/discussion
[2] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_install.ps
[3] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_manpages.ps
PR: 212470
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
I was unable to pin point the exact version of Mach the fdisk utility appeared as I could not find documentation older than version 2.5 & no source code or repo history.
fdisk utility appears as a separate utility[3] in v2.5. Due to this, I have avoided stating the exact version fdisk first appeared in Mach.
Add authors section.
Make correction pointed by igor
[1] https://groups.google.com/d/topic/comp.unix.bsd/Hhi45vAHxDg/discussion
[2] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_install.ps
[3] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_manpages.ps
PR: 212469
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
Move sentence to a new line as advised by igor.
PR: 212441
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
Move sentence to a new line as advised by igor
PR: 212439
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
The tag fastroute came from ipf and was removed in OpenBSD in 2011. The code
allows to skip the in pfil hooks and completely removes the out pfil invoke,
albeit looking up a route that the IP stack will likely find on its own.
The code between IPv4 and IPv6 is also inconsistent and marked as "XXX"
for years.
Submitted by: Franco Fichtner <franco@opnsense.org>
Differential Revision: https://reviews.freebsd.org/D8058
The old behavior depended on the FAT version and on what files were in the
root directory. "mount_msdosfs -o shortnames" is still supported.
Reviewed by: wblock, cem
Discussed with: trasz, adrian, imp
MFC after: 4 weeks
X-MFC-Notes: Don't MFC the removal of findwin95
Differential Revision: https://reviews.freebsd.org/D8018
By adding it to the option priorities table.
PR: 184117
Submitted by: Lowell Gilbert <freebsd-bugs-local at be-well.ilk.org>
Reported by: Tomek CEDRO <cederom at tlen.pl>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D7911
gmultipath.8: Add HISTORY
Adjust sentences with bad phrases picked up by igor
ggatec.8: Add HISTORY
ggated.8: Add HISTORY
ggatel.8: Add HISTORY
Seperate out sentence as advised by igor.
hastctl.8: Add HISTORY
hastd.8: Add HISTORY
Fix sentence highlighted by igor.
iscontrol.8: Add HISTORY
mdmfs.8: Add HISTORY
Address issues raised by igor
mount_nfs.8: Add HISTORY
Not sure where mount_nfs first showed up, but the verison used
in the BSD's originates from 4.4BSD according to CSRG archive.
Though commercial offerings from Sun and others covers older
systems, eg https://groups.google.com/forum/#!topic/net.unix-wizards/lMe7aQikqJI
nandfs.8: Add HISTORY
Adjust sentence in description to address bad phrase highlighted
by igor.
nvmecontrol.8: Add HISTORY
PR: 212491
PR: 212498
PR: 212499
PR: 212500
PR: 212501
PR: 212502
PR: 212505
PR: 212508
PR: 212540
PR: 212543
PR: 212546
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
A standalone reboot utility showed up in 4.0BSD, in AT&T UNIX init has a
case for reboot and is present in the version shipped with V5
either way, current entry is incorrect.
PR: 212548
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
Make dhclient set interface MTU if it was provided.
This version implements MTU setting in dhclient itself before it runs
dhclient-script.
PR: 206721
Submitted by: novel@
Reported by: Jarrod Petz <jlpetz at gmail.com>
Reviewed by: cem, allanjude
Differential Revision: https://reviews.freebsd.org/D5675
the hidden and huge sectors is less than or equal MAXU16. When
formatting in Windows bpbSectors is still used for 63488 sectors and
2048 hidden (sum > MAXU16). The hidden sectors count is the number of
sectors before the FAT16 Boot Record so it shouldn't affect the sector
count. Attached patch (huge_sec_conversion.patch) to only check for
bpb.bpbHugeSectors <= MAXU16 when converting to bpbSectors.
Submitted by: Guy Yur
PR: 183234
Certain features, such as resolv_conf_passthrough=NULL, do not work
correctly due to this missing substitution.
Also remove the @PREFIX@ substitution, which is no longer needed.
Reviewed by: pfg
Approved by: vangyzen (mentor)
MFC after: 1 week
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7572
alternate superblock location when given in the -b option. When int
is 32-bits, block numbers larger than 2^32 would get truncated. This
commit changes the storage fpr the alternate superblock location
to a ufs2_daddr_t.
Submitted by: Dmitry Sivachenko <trtrmitya@gmail.com>
The module works together with ipfw(4) and implemented as its external
action module.
Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.
A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.
A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434
Now zero value of arg1 used to specify "tablearg", use the old "tablearg"
value for "nat global". Introduce new macro IP_FW_NAT44_GLOBAL to replace
hardcoded magic number to specify "nat global". Also replace 65535 magic
number with corresponding macro. Fix typo in comments.
PR: 211256
Tested by: Victor Chernov
MFC after: 3 days
Zero fib is correct value and it conflicts with IP_FW_TARG.
Use bprint_uint_arg() only when opcode contains IP_FW_TARG,
otherwise just print numeric value with cleared high-order bit.
MFC after: 3 days
setdscp's argument can have zero value that conflicts with IP_FW_TARG value.
Always set high-order bit if parser doesn't find tablearg keyword.
MFC after: 3 days
The prototype and the implementation of the pfctl_load_hostid used a
different data type for one of the parameters.
Submitted by: Christian Mauderer <christian.mauderer@embedded-brains.de>
TOS value 0 is valid, so use 256 as an invalid value rather than zero.
This allows users to enforce TOS == 0 with pf.
Reported by: Radek Krejča <radek.krejca@starnet.cz>
so when user did `ipfw table N flush` it always worked, but now
when table N doesn't exist the kernel returns ESRCH error.
This isn't fatal error for flush and destroy commands. Do not
call err(3) when errno is equal to ESRCH. Also warn only when
quiet mode isn't enabled. This fixes a regression in behavior,
when old rules are loaded from file.
Also use correct value for switch in the table_swap().
Reported by: Kevin Oberman
MFC after: 3 days
After r303062, which brought openresolv 3.8.1, we need to replace an
additional @RESTARTCMD@ in resolvconf.
Apply a read fix this time.
Submitted by: Guy Yur
X-MFC with: r303062
loop of reading the rtsock's feed. When it used by some scripts,
this leads to growing number of not finished route(8) instances and
thus growing number of rtsock consumers. Add SIGALRM handler to prevent this.
Reviewed by: melifaro
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
The keep-state, limit and check-state now will have additional argument
flowname. This flowname will be assigned to dynamic rule by keep-state
or limit opcode. And then can be matched by check-state opcode or
O_PROBE_STATE internal opcode. To reduce possible breakage and to maximize
compatibility with old rulesets default flowname introduced.
It will be assigned to the rules when user has omitted state name in
keep-state and check-state opcodes. Also if name is ambiguous (can be
evaluated as rule opcode) it will be replaced to default.
Reviewed by: julian
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6674
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.
Reviewed by: hrs
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420
any open vnodes before proceeding. Make autounmound(8) use this flag.
Without it, even an unsuccessfull unmount causes filesystem flush,
which interferes with normal operation.
Reviewed by: kib@
Approved by: re (gjb@)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7047
or several hops we have segmentation fault because we overwrite the same
structure to store information for host and gateway.
Submitted by: Maryse Levavasseur <maryse.levavasseur@stormshield.eu>
Reworked by: hrs
Approved by: re (hrs)
Differential Revision: https://reviews.freebsd.org/D6980
associated) instance.
The result is that the packet is dropped without an indication
that smaller MTU is advisable, which is not optimal, but better
than a NULL pointer deref.
Approved by: re (glebius)
Adopt the OpenBSD syntax for setting and filtering on VLAN PCP values. This
introduces two new keywords: 'set prio' to set the PCP value, and 'prio' to
filter on it.
Reviewed by: allanjude, araujo
Approved by: re (gjb)
Obtained from: OpenBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D6786
which refers to IEEE 802.1p class of service and maps to the frame
priority level.
Values in order of priority are: 1 (Background (lowest)),
0 (Best effort (default)), 2 (Excellent effort),
3 (Critical applications), 4 (Video, < 100ms latency),
5 (Video, < 10ms latency), 6 (Internetwork control) and
7 (Network control (highest)).
Example of usage:
root# ifconfig em0.1 create
root# ifconfig em0.1 vlanpcp 3
Note:
The review D801 includes the pf(4) part, but as discussed with kristof,
we won't commit the pf(4) bits for now.
The credits of the original code is from rwatson.
Differential Revision: https://reviews.freebsd.org/D801
Reviewed by: gnn, adrian, loos
Discussed with: rwatson, glebius, kristof
Tested by: many including Matthew Grooms <mgrooms__shrew.net>
Obtained from: pfSense
Relnotes: Yes
Correct switch between current and previous line buffers when
encountering a carriage return in the input.
CID: 1305719
Obtained from: OpenBSD (CVS rev. 1.30)
MFC after: 3 days
specified by the -f flag or IFCONFIG_FORMAT environment variable, the user
can request that inet4 subnet masks be printed in CIDR or dotted-quad
notation, in addition to the traditional hex output.
inet6 prefixes can be printed in CIDR as well.
For more documentation see the ifconfig(8) man page.
PR: 169072
Requested by: seanc, marcel, brd, many others
Reviewed by: gnn, jhb (earlier version)
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D2856
This change makes the code use the POSIX basename() function. It has the
advantage that (if implemented correctly), it also imposes no restrict
on the pathname length.
Notice that I haven't added any error handling to the strdup() call. It
looks like none of the other calls to strdup() and malloc() performed by
this utility do it either.
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D6626
Connect it to userland (libmd, libcrypt, sbin/md5) and kernel (crypto.ko)
Support for skein as a ZFS checksum algorithm was introduced in r289422
but is disconnected because FreeBSD lacked a Skein implementation.
A further commit will enable it in ZFS.
Reviewed by: cem
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6166
This implements SHA-512/256, which generates a 256 bit hash by
calculating the SHA-512 then truncating the result. A different initial
value is used, making the result different from the first 256 bits of
the SHA-512 of the same input. SHA-512 is ~50% faster than SHA-256 on
64bit platforms, so the result is a faster 256 bit hash.
The main goal of this implementation is to enable support for this
faster hashing algorithm in ZFS. The feature was introduced into ZFS
in r289422, but is disconnected because SHA-512/256 support was missing.
A further commit will enable it in ZFS.
This is the follow on to r292782
Reviewed by: cem
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6061
Centre for Advanced Internet Architectures
Implementing AQM in FreeBSD
* Overview <http://caia.swin.edu.au/freebsd/aqm/index.html>
* Articles, Papers and Presentations
<http://caia.swin.edu.au/freebsd/aqm/papers.html>
* Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html>
Overview
Recent years have seen a resurgence of interest in better managing
the depth of bottleneck queues in routers, switches and other places
that get congested. Solutions include transport protocol enhancements
at the end-hosts (such as delay-based or hybrid congestion control
schemes) and active queue management (AQM) schemes applied within
bottleneck queues.
The notion of AQM has been around since at least the late 1990s
(e.g. RFC 2309). In recent years the proliferation of oversized
buffers in all sorts of network devices (aka bufferbloat) has
stimulated keen community interest in four new AQM schemes -- CoDel,
FQ-CoDel, PIE and FQ-PIE.
The IETF AQM working group is looking to document these schemes,
and independent implementations are a corner-stone of the IETF's
process for confirming the clarity of publicly available protocol
descriptions. While significant development work on all three schemes
has occured in the Linux kernel, there is very little in FreeBSD.
Project Goals
This project began in late 2015, and aims to design and implement
functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE
in FreeBSD (with code BSD-licensed as much as practical). We have
chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall
and traffic shaper. Implementation of these AQM schemes in FreeBSD
will:
* Demonstrate whether the publicly available documentation is
sufficient to enable independent, functionally equivalent implementations
* Provide a broader suite of AQM options for sections the networking
community that rely on FreeBSD platforms
Program Members:
* Rasool Al Saadi (developer)
* Grenville Armitage (project lead)
Acknowledgements:
This project has been made possible in part by a gift from the
Comcast Innovation Fund.
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
X-No objection: core
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6388
Change default regulatory domain from DEBUG (no limitations;
exposes all device channels) to FCC; as a result, newly created wireless
interface with default settings will have less chances to violate
country-specific regulations.
This change will not affect drivers with pre-initialized regdomain
structure (currentry ath(4) and mwl(4)); in that case, the default
channel list must correspond to the default regdomain / country setting.
You can switch to another regdomain / country via corresponding
ifconfig(8) options; the driver must implement ic_getradiocaps()
method to restore full channel list.
Full country / regdomain list may be obtained via
'ifconfig <iface> list countries' command.
Example: change country to Germany:
ifconfig wlan0 down # all wlans on the device must be down
ifconfig wlan0 country DE
ifconfig wlan0 up
# wpa_supplicant(8), dhclient(8) etc
At the creation time:
ifconfig wlan0 create wlandev wpi0 country DE
To make changes permanent add the following line to the rc.conf(5):
create_args_wlan0="country DE"
Tested with
- Intel 3945BG (wpi(4)).
- WUSB54GC (rum(4)).
Reviewed by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6228
defects. When shifting an unsigned byte into the upper 8 bits of
an int and the resulting value is greater than 0x7FFFFFF, the result
will be sign extended when converting to a 64 bit unsigned long.
Fix by casting to (uint64_t) before the shift.
Reported by: Coverity
CID: 1356044, 1356045
Reviewed by: ken
overflow defect. Use the new CCB_CLEAR_ALL_EXCEPT_HDR() macro
instead of the calling bzero() on the pointer to the header used
as an array and indexed by 1.
Don't leak a buffer after executing "goto restart_report" by
overwriting its pointer with the results of another calloc().
Be sure to clear the buffer before reusing it. (CID 1356042)
Reported by: Coverity
CID: 1356022, 1356034, 1356023, 1356035, 1356042
Reviewed by: ken
The currently used idiom for clearing the part of a ccb after its
header generates one or two Coverity errors for each time it is
used. All instances generate an Out-of-bounds access (ARRAY_VS_SINGLETON)
error because of the treatment of the header as a two element array,
with a pointer to the non-existent second element being passed as
the starting address to bzero(). Some instances also alsp generate
Out-of-bounds access (OVERRUN) errors, probably because the space
being cleared is larger than the sizeofstruct ccb_hdr).
In addition, this idiom is difficult for humans to understand and
it is error prone. The user has to chose the proper struct ccb_*
type (which does not appear in the surrounding code) for the sizeof()
in the length calculation. I found several instances where the
length was incorrect, which could cause either an actual out of
bounds write, or incompletely clear the ccb.
A better way is to write the code to clear the ccb itself starting
at sizeof(ccb_hdr) bytes from the start of the ccb, and calculate
the length based on the specific type of struct ccb_* being cleared
as specified by the union ccb member being used. The latter can
normally be seen in the nearby code. This is friendlier for Coverity
and other static analysis tools because they will see that the
intent is to clear the trailing part of the ccb.
Wrap all of the boilerplate code in a convenient macro that only
requires a pointer to the desired union ccb member (or a pointer
to the union ccb itself) as an argument.
Reported by: Coverity
CID: 1007578, 1008684, 1009724, 1009773, 1011304, 1011306
CID: 1011307, 1011308, 1011309, 1011310, 1011311, 1011312
CID: 1011313, 1011314, 1011315, 1011316, 1011317, 1011318
CID: 1011319, 1011320, 1011321, 1011322, 1011324, 1011325
CID: 1011326, 1011327, 1011328, 1011329, 1011330, 1011374
CID: 1011390, 1011391, 1011392, 1011393, 1011394, 1011395
CID: 1011396, 1011397, 1011398, 1011399, 1011400, 1011401
CID: 1011402, 1011403, 1011404, 1011405, 1011406, 1011408
CID: 1011409, 1011410, 1011411, 1011412, 1011413, 1011414
CID: 1017461, 1018387, 1086860, 1086874, 1194257, 1229897
CID: 1229968, 1306229, 1306234, 1331282, 1331283, 1331294
CID: 1331295, 1331535, 1331536, 1331539, 1331540, 1341623
CID: 1341624, 1341637, 1341638, 1355264, 1355324
Reviewed by: scottl, ken, delphij, imp
MFH: 1 month
Differential Revision: https://reviews.freebsd.org/D6496
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
A DHCP client identifier is simply the hardware type (one byte) concatenated
with the hardware address (some variable number of bytes, but at most 16).
Limit the size of the temporary buffer to match and the rest of the
calculations shake out correctly.
This is a follow-up to the incorrect r299512, reverted in r300172.
CIDs: 1008682, 1305550
Sponsored by: EMC / Isilon Storage Division
It broke client identifiers because I misunderstood the intent of the code.
There is still a minor issue detected by Coverity (at least, I can't find where
the code proves it isn't an issue). I'll follow up with a better fix for the
CIDs.
Reported by: Ian FREISLICH
Sponsored by: EMC / Isilon Storage Division
objects with the same name in different sets.
Add optional manage_sets() callback to objects rewriting framework.
It is intended to implement handler for moving and swapping named
object's sets. Add ipfw_obj_manage_sets() function that implements
generic sets handler. Use new callback to implement sets support for
lookup tables.
External actions objects are global and they don't support sets.
Modify eaction_findbyname() to reflect this.
ipfw(8) now may fail to move rules or sets, because some named objects
in target set may have conflicting names.
Note that ipfw_obj_ntlv type was changed, but since lookup tables
actually didn't support sets, this change is harmless.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
that it is NUL terminated. Additional NUL padding is not required
for short names.
Use sizeof(destination) in a few places instead of IFNAMSIZ.
Cast afp->af_ridreq and afp->af_addreq to make the intent of
the code more obvious.
Reported by: Coverity
CID: 1009628, 1009630, 1009631, 1009632, 1009633, 1009635, 1009638
CID: 1009639, 1009640, 1009641, 1009642, 1009643, 1009644, 1009645
CID: 1009646, 1009647, 1010049, 1010050, 1010051, 1010052, 1010053
CID: 1010054, 1011293, 1011294, 1011295, 1011296, 1011297, 1011298
CID: 1011299, 1305821, 1351720, 1351721
MFC after: 1 week
Use arc4random_uniform() when the desired random number upper bound
is not a power of two.
While here, we don't need srandom() and friends anymore.
Obtained from: OpenBSD (CVS rev. 1.20)
The reports and fixes are straightforward but it's nice to be able
to confirm against NetBSD.
CID: 271080, 272306, 272307
Obtained from: NetBSD (CVS ref. 1.21 - 1.23)
MFC after: 2 weeks.
