Commit Graph

51 Commits

Author SHA1 Message Date
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
Steven Hartland
85c9dd9d89 Prevent overflow issues in timeout processing
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision:	https://reviews.freebsd.org/D1157
Reviewed by:	mav, davide
MFC after:	1 month
Sponsored by:	Multiplay
2014-11-21 21:01:24 +00:00
John Baldwin
5d00bfa3cd Fix a few more drivers that were explicitly destroying the bus_dma
map created by bus_dmamem_alloc().
2014-06-11 17:03:14 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
John Baldwin
e40cc6afc4 Add locking to the ahb(4) driver and mark it MPSAFE.
- Use device_printf() and device_get_unit() instead of storing the unit
  number in the softc.
- Remove use of explicit bus space handles and tags.
- Compare pointers against NULL.
- Let new-bus allocate a softc rather than doing it by hand.

Tested by:	no one
2012-10-15 16:05:02 +00:00
Scott Long
3a71b630ff Remove a stale comment.
Submitted by:	jimharris
2012-03-12 20:31:58 +00:00
Scott Long
6ac6f295b0 Final pass at having devices use their bus parent for dma tags. The
remaining drivers that haven't been converted have various problems or
complexities that will be dealt with later.  This list includes:

hptrr, hptmv, hpt27xx - device aggregation across multiple parents
drm - want to talk to the maintainer first
tsec, sec - Openfirmware devices, not sure if changes are warranted
fatm - Done except for unused testing code
usb - want to talk to the maintainer first
ce, cp, ctau, cx - Significant driver changes needed to convey parent info

There are also devices tucked into architecture subtrees that I'll leave
for the respective maintainers to deal with.
2012-03-12 19:29:35 +00:00
Scott Long
846199b736 Fix a compile error from the last change. 2007-06-17 15:21:09 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Alexander Leidinger
02da6fa190 Handle errors from bus_setup_intr().
Found by:	Coverity Prevent (tm)
CID:		1066
2007-04-01 16:55:31 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Matt Jacob
b3d93fd0c9 Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.
PR:		106543
MFC after:	3 days
2006-12-11 18:28:31 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Matt Jacob
fa9ed86506 The first of 3 major steps to move the CAM layer forward to using
the CAM_NEW_TRAN_CODE that has been in the tree for some years now.

This first step consists solely of adding to or correcting
CAM_NEW_TRAN_CODE pieces in the kernel source tree such
that a both a GENERIC (at least on i386) and a LINT build
with CAM_NEW_TRAN_CODE as an option will compile correctly
and run (at least with some the h/w I have).

After a short settle time, the other pieces (making
CAM_NEW_TRAN_CODE the default and updating libcam
and camcontrol) will be brought in.

This will be an incompatible change in that the size of structures
related to XPT_PATH_INQ and XPT_{GET,SET}_TRAN_SETTINGS change
in both size and content. However, basic system operation and
basic system utilities work well enough with this change.

Reviewed by:	freebsd-scsi and specific stakeholders
2006-10-31 05:53:29 +00:00
Matt Jacob
866fcf84ba Fix missing update to reflect change in scsi_inquiry data structure. 2006-05-31 14:33:23 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Andrew Gallatin
4c672cfa18 Make this at least compile on 64 bit platforms. Its been breaking
the alpha tinderbox for far too long.
2003-07-30 20:09:22 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Nate Lawson
2813692cc2 Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

Looked over by:	scottl
2003-06-14 22:17:41 +00:00
Scott Long
7e71df9339 Bring back bus_dmasync_op_t. It is now a typedef to an int, though the
BUS_DMASYNC_ definitions remain as before.  The does not change the ABI,
and reverts the API to be a bit more compatible and flexible.  This has
survived a full 'make universe'.

Approved by:	re (bmah)
2003-05-27 04:59:59 +00:00
Maxime Henrion
7a648f56cf I deserve a big pointy hat for having missed all those references
to bus_dmasync_op_t in my last commit.
2003-04-10 23:50:06 +00:00
Matthew N. Dodd
563d4d8656 Clean up argument comments for bus_dma_tag_create() calls. 2003-03-29 09:46:10 +00:00
Alfred Perlstein
8deebb0160 Consolidate MIN/MAX macros into one place (param.h).
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-02-02 13:17:30 +00:00
Peter Wemm
9c580bea80 Fix new gcc-3.1 warnings. I think this gets GENERIC compiling cleanly
again.
2002-05-24 05:21:36 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
David Malone
5417ec4db1 Add the use of M_ZERO to some malloc calls.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	gibbs
2000-10-29 15:47:16 +00:00
Poul-Henning Kamp
46aa3347cb Convert all users of fldoff() to offsetof(). fldoff() is bad
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.

Define __offsetof() in <machine/ansi.h>

Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>

Remove myriad of local offsetof() definitions.

Remove includes of <stddef.h> in kernel code.

NB: Kernelcode should *never* include from /usr/include !

Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.

Deprecate <struct.h> with a warning.  The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.

Paritials reviews by:   various.
Significant brucifications by:  bde
2000-10-27 11:45:49 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Alexander Langer
0cca1cc078 Fix typo (accessable --> accessible).
PR:		18588
Submitted by:	Anatoly Vorobey <mellon@pobox.com>
Reviewed by:	asmodai
2000-06-14 17:53:40 +00:00
Peter Wemm
86edd75342 Remove #include "eisa.h" and #if NEISA > 0 2000-01-29 18:22:33 +00:00
Yoshihiro Takahashi
41d8671572 Use rman_get_bustag and rman_get_bushandle to initialize bus tag and
bus handle.
2000-01-17 12:38:51 +00:00
Peter Wemm
c5191a983c Pre 4.0 tidy up.
Collect together the components of several drivers and export eisa from
the i386-only area (It's not, it's on some alphas too).  The code hasn't
been updated to work on the Alpha yet, but that can come later.

Repository copies were done a while ago.
Moving these now keeps them in consistant place across the 4.x series
as the newbusification progresses.

Submitted by:   mdodd
2000-01-14 07:14:17 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
086646f7c6 Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.
1999-08-16 01:52:21 +00:00
Matthew N. Dodd
0d6ab4a16a Move the specification of EDGE/LEVEL triggered interrupts to
eisa_add_intr() which now takes an additional arguement (one of
EISA_TRIGGER_LEVEL or EISA_TRIGGER_EDGE).

The flag RR_SHAREABLE has no effect when passed to
bus_alloc_resource(dev, SYS_RES_IRQ, ...) in an EISA device context as
the eisa_alloc_resource() call (bus_alloc_resource method) now deals
with this flag directly, depending on the device ivars.

This change does nothing more than move all the 'shared = inb(foo + iobsse)'
nonesense to the device probe methods rather than the device attach.

Also, print out 'edge' or 'level' in the IRQ announcement message.

Reviewed by: dfr
1999-08-01 22:57:09 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Kenneth D. Merry
9deea8574e Add a number of interrelated CAM feature enhancements and bug fixes.
NOTE:  These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface.  A make world is recommended.

camcontrol.[c8]:
 - We now support two new commands, "tags" and "negotiate".

	- The tags commands allows users to view the number of tagged
	  openings for a device as well as a number of other related
	  parameters, and it allows users to set tagged openings for
	  a device.

	- The negotiate command allows users to enable and disable
	  disconnection and tagged queueing, set sync rates, offsets
	  and bus width.  Note that not all of those features are
	  available for all controllers.  Only the adv, ahc, and ncr
	  drivers fully support all of the features at this point.
	  Some cards do not allow the setting of sync rates, offsets and
	  the like, and some of the drivers don't have any facilities to
	  do so.  Some drivers, like the adw driver, only support enabling
	  or disabling sync negotiation, but do not support setting sync
	  rates.

 - new description in the camcontrol man page of how to format a disk
 - cleanup of the camcontrol inquiry command
 - add support in the 'devlist' command for skipping unconfigured devices if
   -v was not specified on the command line.
 - make use of the new base_transfer_speed in the path inquiry CCB.
 - fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

 - new flags on many CCB function codes to designate whether they're
   non-immediate, use a user-supplied CCB, and can only be passed from
   userland programs via the xpt device.  Use these flags in the transport
   layer and pass driver to categorize CCBs.

 - new flag in the transport layer device matching code for device nodes
   that indicates whether a device is unconfigured

 - bump the CAM version from 0x10 to 0x11

 - Change the CAM ioctls to use the version as their group code, so we can
   force users to recompile code even when the CCB size doesn't change.

 - add + fill in a new value in the path inquiry CCB, base_transfer_speed.
   Remove a corresponding field from the cam_sim structure, and add code to
   every SIM to set this field to the proper value.

 - Fix the set transfer settings code in the transport layer.

scsi_cd.c:

 - make some variables volatile instead of just casting them in various
   places
 - fix a race condition in the changer code
 - attach unless we get a "logical unit not supported" error.  This should
   fix all of the cases where people have devices that return weird errors
   when they don't have media in the drive.

scsi_da.c:

 - attach unless we get a "logical unit not supported" error

scsi_pass.c:

 - for immediate CCBs, just malloc a CCB to send the user request in.  This
   gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

 - change the CAM ioctls to use the CAM version as their group code.

adv driver:

 - Allow changing the sync rate and offset separately.

adw driver

 - Allow changing the sync rate and offset separately.

aha driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

 - Allow setting offset and sync rate separately

bt driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

 - Fix the ultra/ultra 2 negotiation bug
 - allow setting both the sync rate and offset separately

Other HBA drivers:
 - Put code in to set the base_transfer_speed field for
   XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by:	gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
Justin T. Gibbs
6d6f090033 ahb.c:
Synchronize malloc types for our softc.

ahc_eisa.c:
	Sync to aic7xxx driver bus dma and new bus changes.
1999-04-23 23:29:00 +00:00
Peter Wemm
a49a3d4433 Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go.  The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa.  I have only tested the EISA part of this so far.

Submitted by:	 Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
Eivind Eklund
c6d0e3f0c1 Staticize. 1999-04-11 03:06:07 +00:00
Justin T. Gibbs
da925f6c0f Poll for bus reset completion instead of assuming that our interrupt
is enabled.
1999-03-05 23:37:07 +00:00
Justin T. Gibbs
dd3afbd452 Correct test in poll loop for determining that the mailbox is free to
accept a new command.
1999-01-28 03:30:02 +00:00
Matthew Dillon
485111b55b Fix parenthesization, but the code still looks wrong. 1999-01-28 01:33:02 +00:00
Justin T. Gibbs
9574f7968d Hook up ahapoll so that dumps, synchronize cache commands or any other
command that comes in through xpt_polled_action works correctly.
1998-10-09 21:38:36 +00:00
Justin T. Gibbs
c2921d36a9 Use %p with (void *) casts to print pointers with printf. 1998-09-17 00:08:29 +00:00
Justin T. Gibbs
6954e80f7b Fix printf format bugs. 1998-09-16 03:27:12 +00:00