Commit Graph

28 Commits

Author SHA1 Message Date
Nathan Whitehorn
348a26e6c7 Make netbooting work again by disabling BOOTP_NFSV3. Investigate why this
causes bad RPC errors later.
2015-01-16 17:41:21 +00:00
Warner Losh
d4f95c889d In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.
2014-03-18 14:41:18 +00:00
Nathan Whitehorn
8279efe54e Switch default Book-E scheduler to ULE, which works now, and enable
CAPABILITIES stuff required to make ssh work.

Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of issue with bitrot. That will require figuring out how to link
Book-E and AIM kernels at the same address, however...
2014-02-01 20:56:50 +00:00
David E. O'Brien
0e6a0799a9 Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
David E. O'Brien
99ff83da74 Decouple yarrow from random(4) device.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
  The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.

* random(4) device doesn't really depend on rijndael-*.  Yarrow, however, does.

* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
  random_adaptor is basically an adapter that plugs in to random(4).
  random_adaptor can only be plugged in to random(4) very early in bootup.
  Unplugging random_adaptor from random(4) is not supported, and is probably a
  bad idea anyway, due to potential loss of entropy pools.
  We currently have 3 random_adaptors:
  + yarrow
  + rdrand (ivy.c)
  + nehemeiah

* Remove platform dependent logic from probe.c, and move it into
  corresponding registration routines of each random_adaptor provider.
  probe.c doesn't do anything other than picking a specific random_adaptor
  from a list of registered ones.

* If the kernel doesn't have any random_adaptor adapters present then the
  creation of /dev/random is postponed until next random_adaptor is kldload'ed.

* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
  system wide one.

Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
2013-07-29 20:26:27 +00:00
Alexander Motin
45f6d66569 Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0.  Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam.  Remove the
atacontrol utility and some man pages.  Remove useless now options ATA_CAM.

No objections:	current@, stable@
MFC after:	never
2013-04-04 07:12:24 +00:00
Rafal Jaworowski
17f4cae4a5 Let us manage differences of Book-E PowerPC variations i.e. vendor /
implementation specific vs. the common architecture definition.

Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under
BOOKE_PPC4XX are not used in the code yet.

This change set is not supposed to affect existing E500 support, it's just
another reorg step before bringing support for E500mc, E5500 and PPC465.

Obtained from:	AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
Ed Schouten
92396a3174 Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.
2012-03-21 08:38:42 +00:00
Marcel Moolenaar
67ad01694a Apply r221124 to Book-E: switch to the new NFS client.
Approved by:	re (blanket)
2011-07-31 18:34:38 +00:00
Alexander Motin
97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
Nathan Whitehorn
c3e289e1ce MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Andrew Thompson
b850ecc180 Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after:	1 week
2010-04-22 21:31:34 +00:00
Attilio Rao
c1210a7d97 Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
2010-02-15 23:44:48 +00:00
Attilio Rao
88cbfa852e Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
2010-02-10 16:30:04 +00:00
Rafal Jaworowski
51500a4872 Include SMP support in the MPC85XX kernel by default. 2009-06-25 10:07:21 +00:00
Rafal Jaworowski
f07ef6e4e3 DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus.
Obtained from:	Semihalf
2009-06-22 15:48:47 +00:00
Rafal Jaworowski
757cb6dbdf Integrated I2C controller driver (found in MPC85xx and other SOC parts).
Obtained from:	Freescale, Semihalf
2009-06-22 15:34:32 +00:00
Rafal Jaworowski
02b553cafc Initial version of the sec(4) driver for the integrated security engine found
in Freescale system-on-chip devices.

The following algorithms and schemes are currently supported:
  - 3DES, AES, DES
  - MD5, SHA1, SHA256, SHA384, SHA512

Reviewed by:	philip
Obtained from:	Freescale, Semihalf
2009-06-06 09:37:55 +00:00
Jun Kuriyama
b3b17597ea - Use "device\t" and "options \t" for consistency. 2009-05-10 00:00:25 +00:00
Marcel Moolenaar
ac741ae511 Add suppport for ISA and ISA interrupts to make the ATA
controller in the VIA southbridge functional in the CDS
(Configurable Development System) for MPC85XX.
The embedded USB controllers look operational but the
interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00
Andrew Thompson
c89d41e5ff Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
Rafal Jaworowski
bd37530ee4 Additional features for the tsec(4) Ethernet driver.
- interrupt coalescing
  - polling
  - jumbo frames
  - multicast
  - VLAN tagging

The enhanced version of the chip (eTSEC) can also take advantage of:

  - TCP/IP checksum calculation h/w offloading

Obtained from:	Freescale, Semihalf
2009-02-17 14:57:05 +00:00
Marcel Moolenaar
e5637f19bd Enable the cfi(4) driver. 2008-10-25 06:25:15 +00:00
Rafal Jaworowski
90a37a5a28 Enable NFSLOCKD for MPC85XX kernel to comply with recent NFS rework. 2008-04-26 17:37:13 +00:00
Poul-Henning Kamp
0051271e12 Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
2008-04-21 10:09:55 +00:00
Poul-Henning Kamp
943f6ddd39 Get rid of an empty RTC implementation and hook up genclock instead. 2008-04-13 21:20:26 +00:00
Rafal Jaworowski
321578e3d0 Connect MPC85XX to the PowerPC build.
The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies:

1. make buildworld TARGET_ARCH=powerpc
2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX

This default config uses kernel-level FPU emulation. For the soft-float world
approach:

1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500
2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX
3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX

Approved by:	cognet (mentor)
MFp4:		e500
2008-03-03 20:40:20 +00:00