Commit Graph

6308 Commits

Author SHA1 Message Date
Cameron Grant
506a5308bc add a method for recording of specific channels for devices with more than
one hardware record channel.  new devices, /dev/dsprX.Y where X is unit
number and Y is channel index.
2001-09-05 16:28:41 +00:00
Cameron Grant
c2e6dd76ce don't try to dump nonexistent data when recording 2001-09-05 14:49:44 +00:00
Bill Paul
516f7ab7ac Regenerate. 2001-09-04 22:00:49 +00:00
Bill Paul
e1968a0d2f Add support for the BCM5401 and BCM5411 10/100/1000Mbps copper gigE PHYs.
This basically updates the brgphy driver to support 10/100 modes in
addition to 1000Mbps modes.
2001-09-04 22:00:33 +00:00
Matt Jacob
64edff948b I don't know what I was thinking- if I have two separate busses on on
SIM (as is true for the 1280 and the 12160), then I have to have separate
flags && status for *both* busses. *Whap*.

Implement condition variables for coordination with some target mode
events. It's nice to use these and not panic in obscure little places
in the kernel like 'propagate_priority' just because we went to sleep
holding a mutex, or some other absurd thing.

Remove some bogus ISP_UNLOCK calls. *Whap*.

No longer require that somebody do a lun enable on the wildcard device
to enable target mode. They are, in fact, orthogonal. A wildcard open
is a statement that somebody upstream is willing to accept commands which
are otherwise unrouteable. Now, for QLogic regular SCSI target mode, this
won't matter for a damn because we'll never see ATIOs for luns we haven't
enabled (are listening for, if you will). But for SCCLUN fibre channel
SCSI, we get all kinds of ATIOs. We can either reflect them back here
with minimal info (which is isp_target.c:isp_endcmd() is for), or the
wildcard device (nominally targbh) can handle them.

Do further checking against firmware attributes to see whether we can,
in fact, support target mode in Fibre Channel. For now, require SCCLUN
f/w to supoprt FC target mode.

This is an awful lot of change, but target mode *still* isn't quite right.

MFC after:	4 weeks
2001-09-04 21:53:12 +00:00
Matt Jacob
23ac1fce7b Note for ATIOs returned because of BDRs or Bus Resets for which bus this
applies to.  Do more bus # foo things.

Acknowledge Immediate Notifies right away prior to throwing events upstream
(where they're currently being ignored, *groan*)

Capture ASYNC_LIP_F8 as with ASYNC_LIP_OCCURRED. Don't percolate them
upstream as if they were BUS RESETS- they're not.
2001-09-04 21:48:02 +00:00
Matt Jacob
b96934e89a If we're on an interrupt stack, mark things so that we don't try
and cv_wait for mailbox commands to complete if we start them from
here.

Fix residuals for target mode such that we only check the residual and
set it in the CTIO if this is the last CTIO (when we're sending status).

MFC after:	4 weeks
2001-09-04 21:45:57 +00:00
Matt Jacob
f6a3bcf86c I don't know what I was thinking- if I have two separate busses on on
SIM (as is true for the 1280 and the 12160), then I have to have separate
flags && status for *both* busses. *Whap*.

Implement condition variables for coordination with some target mode
events. It's nice to use these and not panic in obscure little places
in the kernel like 'propagate_priority' just because we went to sleep
holding a mutex, or some other absurd thing.

MFC after:	4 weeks
2001-09-04 21:33:06 +00:00
Matt Jacob
2332ac8c61 Fix SET_IID_VAL/SET_BUS_VAL macros to usable.
MFC after:	4 weeks
2001-09-04 19:42:13 +00:00
Bill Paul
1af8bec768 Add support for Conexant LANfinity miniPCI controllers. People who have
laptops with this chip should test this and report back as I don't have
access to this hardware myself. People with -stable systems should try
the patch at:

	http://www.freebsd.org/~wpaul/conexant.patch.gz

Submitted by:	Phil Kernick <Phil@Kernick.org>
2001-09-04 17:10:11 +00:00
Mitsuru IWASAKI
dbad09ef38 Just print a message in acpi_tz_monitor() only when new active state
is different from the previous active state.
This reduce tons of 'acpi_tz0: _AC0: temperature 64.0 >= setpoint 64.0'
messages.

Reviewed by:	msmith
2001-09-04 15:40:12 +00:00
Poul-Henning Kamp
01706d206f Kill the NCCD constant by modernizing the ccd driver.
Submitted by:	sobomax
Reviewed by:	phk
2001-09-04 08:33:30 +00:00
Greg Lehey
27b286aa8c Remove an accidentally forgotten #ifdef. This could cause depletion
of mutexes if a lot of plexes are created and destroyed.
2001-09-04 06:30:05 +00:00
Noriaki Mitsunaga
48856b5fc7 We should not pass the size of the memory to bus_alloc_resource().
We should use 1 to request default iomem.

Pointed-out-by: imp
2001-09-04 04:32:48 +00:00
Scott Long
f8185d5456 Sigh. There are actually two ioctls ranges that need to be watched on the
linux side.  This will all be over soon...
2001-09-03 07:50:14 +00:00
Matt Jacob
d82b6503a9 Because we now store SCCLUN capabilities in firmware attributes, get
rid of the silly test of isp_maxluns > 16 and use the attibutes directly.

MFC after:	4 weeks
2001-09-03 03:12:10 +00:00
Matt Jacob
181640a81c Clarify issues about whether we have SCCLUN (65535 luns) or non-SCCLUN (16
luns) firmware for the Fibre Channel cards.

We used to assume that if we didn't download firmware, we couldn't know
what the firmware capability with respect to SCCLUNs is- and it's important
because the lun field changes in the request queue entry based upon which
firmware it is.

At any rate, we *do* get back firmware attributes in mailbox register 6
when we do ABOUT FIRMWARE for all 2200/2300 cards- and for 2100 cards
with at least 1.17.0 firmware. So- we now assume non-SCCLUN behaviour
for 2100 cards with firmware < 1.17.0- and we check the firmware attributes
for other cards (loaded firmware or not).

This also allows us to get rid of the crappy test of isp_maxluns > 16-
we simply can check firmware attributes for SCCLUN behaviour.

This required an 'oops' fix to the outgoing mailbox count field for
ABOUT FIRMWARE for FC cards.

Also- while here, hardwire firmware revisions for loaded code for SBus
cards. Apparently the 1.35 or 1.37 f/w we've been loading into isp1000
just doesn't report firmware revisions out to mailbox regs 1, 2 and 3
like everyone else. Grumble. Not that this fix hardly matters for FreeBSD.

MFC after:	4 weeks
2001-09-03 03:09:48 +00:00
Matt Jacob
f8597b62e5 Add some more firmware revision macros. Add firmware attributes field
to fcparam structure.
MFC after:	4 weeks
2001-09-03 03:03:32 +00:00
Orion Hodson
bb76bd1180 Return updated blocksize from setblocksize function. 2001-09-03 02:14:55 +00:00
Orion Hodson
61608985c7 Fix return value of cs4281chan_setblocksize. 2001-09-03 01:05:04 +00:00
Orion Hodson
256e749243 Fix return value of svchan_setblocksize.
Expand probing range.
2001-09-03 01:03:50 +00:00
Orion Hodson
167d1bcd19 Fix return value of setblocksize functions. Recording is interspersed
with silent intervals otherwise.
2001-09-03 00:45:00 +00:00
Scott Long
61fea38293 Work around a bug where the driver's copy of the disklabel gets corrupted
and causes diskerr() to panic.
2001-09-02 23:16:40 +00:00
Scott Long
3361abb7a7 Restrict the range of linux ioctls we will accept. 2001-09-02 23:15:26 +00:00
Takeshi Shibagaki
5f5e1ff3b1 Always turned on 8bit access card support for the fe driver
both i386/pc98, so options FE_8BIT_SUPPORT was deleted.

Reviewed by: nyan
2001-09-02 13:05:00 +00:00
Nick Hibma
aa75eeda2f Only clear endpoint stall if status was USBD_STALLED.
This avoids panicing the system by unplugging a hub. The interrupt transfer
would sometimes arrive after the driver had been removed.
2001-09-02 09:26:14 +00:00
Noriaki Mitsunaga
9d92f16230 Fix bus timeout bug which might happen when nsp do suspend I/O burst write.
A nsp chip does suspend I/O write by 512bytes burst write,
though the chip only has 48 bytes FIFO. The chip assert I/O WAIT
signal to PC-Card bus after the CPU writes more than 48 bytes to
the chip if the SCSI device does not respond immediately in supsend
I/O burst write. If the device does not respond for a while it might
cause PC-Card bus timeout.

The previous work around was to wait the request from SCSI device.
But there are some devices which request bytes for synchronous transfer
immediately. So current work aound is to fill 32bytes FIFO, wait for
FIFO empty and burst write 512-32 bytes for every 512 bytes block.

Submitted-by: Honda-san (the author of the driver)
Obtained-from: NetBSD/pc98
2001-09-02 07:18:29 +00:00
Noriaki Mitsunaga
1068971fe0 Demand minimum I/O size rather than 0 when it calls
bus_alloc_resource(dev, SYS_RES_IOPORT, ...)

Pointed-out by: Yamamoto-san shigeru@iij.ad.jp
2001-09-02 06:42:40 +00:00
Takeshi Shibagaki
a8bc31671a Update cis tuple parser, add a pccarddevs entry,
and improve PCCARD_IVAR_ETHADDR in pccard_read_ivar().

Change points:

(1) Read Function Ext tuple.
(2) Add Ratoc REX-R280 entry(fe driver).
(3) Take ether address from function ext tuple.

Reviewed by: imp
Obtained from: NetBSD
2001-09-02 06:37:41 +00:00
Mitsuru IWASAKI
dd081ed5d0 Fix typo; CTLFLAG_RO -> CTLFLAG_RD. 2001-09-02 06:28:20 +00:00
Takeshi Shibagaki
c8dab10220 Update the fe driver to probe and attach under a NEWCARD kernel.
Reviewed by: imp
Obtained from: NetBSD
2001-09-02 06:27:07 +00:00
Nick Hibma
c2d7a52a1b Small nit: Make both prints use 'at device %d.%d'. 2001-09-01 23:06:14 +00:00
Mike Smith
dde24897d2 Add a MODULE_VERSION declaration. This should prevent duplicate loading
of the module, and allows other modules to depend on and link against
the ACPI module.

Add a sysctl that allows us to retrieve the ACPI CA version number as
well.
2001-09-01 22:41:53 +00:00
Nick Hibma
d7e53003ef First check whether the USB transfer was cancelled before starting to
use the data structures related to that keyboard.
2001-09-01 09:38:45 +00:00
Nick Hibma
2ce5d19515 Regen. 2001-09-01 09:35:46 +00:00
Nick Hibma
c2d98eeaca Spelling nit. 2001-09-01 09:33:15 +00:00
Søren Schmidt
1f3d9edf37 Make "atapi less" kernels link again.
Question is if we should allow the ioctl only interface to be
created if atapi devices are present, but no driver linked in....
2001-09-01 08:47:11 +00:00
Mike Smith
2a4684aa19 Don't claim memory resources owned by a PNP0C01 device ("system memory")
as some systems claim the entire physical address space is owned by it.
2001-08-31 22:59:04 +00:00
Murray Stokely
b64e68c520 Add ID for the Best Data Smart One 56SPS Voice modem.
PR:		kern/24851
Submitted by:	Daniel Rudy <dcrudy@aol.com>
2001-08-31 21:51:00 +00:00
Murray Stokely
ba5b94fef7 Correct the ID for the ALS0120 PnP Joystick. It is different from the
ALS0110.

PR:		kern/22617
Submitted by:	Mike Holling <myke@fks.bt>
2001-08-31 21:40:56 +00:00
Matt Jacob
126ec86486 Add 2 Gigabit Fibre Channel support (2300 && 2312 cards). This required
some reworking (and consequent cleanup) of the interrupt service code.

Also begin to start a cleanup of target mode support that will (eventually)
not require more inforamtion routed with the ATIO to come back with the
CTIO other than tag.

MFC after:	4 weeks
2001-08-31 21:39:04 +00:00
Matt Jacob
a2f1799115 Add 2300/2312 (2Gbit) firmware. 2001-08-31 21:25:15 +00:00
Murray Stokely
6e66dd6b62 Add OMRON ME5614ISA PnP modem.
PR:		kern/22801
Submitted by:	Ryuzo Okada <R.Okada@mm.neweb.ne.jp>
2001-08-31 20:37:02 +00:00
Murray Stokely
4fd606bfba Add PCI device IDs for Kuotech dual port serial cards.
Also give example of the flags needed to use these cards.

PR:		kern/21242
Submitted by:	Shigeki Moride <moride@portside.net>
2001-08-31 20:16:00 +00:00
Mike Smith
05c03ed9b8 Don't activate placeholder resources; it can be very expensive in the
SYS_RES_MEMORY case, and it shouldn't be necessary.
2001-08-31 18:08:50 +00:00
Takanori Watanabe
ff741bef86 Call OS-independent resume routine to execute _WAK .. etc.
This should also recover GPE bit,comment says, though not implemented yet.
2001-08-31 05:36:48 +00:00
Mike Smith
91bca55f68 Revert previous "fix"; bus mice still have to be manually probed even in
the presence of PnP data.

Submitted by:	yokota
2001-08-31 02:14:34 +00:00
Nick Hibma
f3dfa83f4f Add safety belts. A control endpoint doesn't have an endpoint descriptor. 2001-08-30 21:45:28 +00:00
Doug Rabson
7e59bf6765 Recognise VIA Apollo KT133A bridge.
PR:	30061
Submitted by:	John Merryweather Cooper <jmcoopr@webmail.bmi.net>
MFC after:	1 week
2001-08-30 14:17:48 +00:00
Scott Long
6965a4937d Doh! Fix a comma that disappeared along the way.
Pointy-hat by:	peter
2001-08-30 13:09:09 +00:00