Target mode operation does not depend on the initiator mode scan process.
This change allows the target driver to attach earlier and receive some
async events (like AC_CONTRACT) that could be lost otherwise.
MFC after: 1 week
the value without recompiling the kernel. This is useful when
recompiling is not possible as an immediate solution. When we run out
of witness objects, witness is completely disabled. Not having an
immediate solution can therefore be problematic.
Submitted by: Sreekanth Rupavatharam <rupavath@juniper.net>
Obtained from: Juniper Networks, Inc.
Such LUNs will be visible to initiators, but return "not ready" status
on media access commands. If backing storage become available later,
`ctladm modify ...` or `service ctld reload` can trigger its reopen.
compatible with write-locked path. Test for MAP_ENTRY_NOSYNC and set
VPO_NOSYNC for pages with dirty mask zero (this does not exclude a
possibility that the page is dirty, e.g. due to read fault on
writeable mapping and consequent write; the same issue exists in the
slow path).
Use helper vm_fault_dirty() to unify fast and slow path handling of
VPO_NOSYNC and setting the dirty mask.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
- Read the counts of received, dropped, and transmitted management
packets and add sysctl nodes for them.
- Fix the total octets received/transmitted to read all 64 bits of
the counters.
- Add missing sysctl nodes for rlec, tncrs, fcruc, tor, and tot.
- Remove spurious spaces.
Reviewed by: Eric Joyner @ Intel
MFC after: 1 week
is added to return EEXIST when only "b" interface exists---this can happen
when epair<N>b is moved to a vnet jail and then "ifconfig epair<N> create"
is invoked there.
The powerpc support was the only supported architecture not prepending the elf format name
with "-freebsd" in base this change makes it consistent with other architectures.
On newer version of binutils the powerpc format is also prepended with "-freebsd".
Also modify the kernel ldscripts in that regards.
As a result it is now possible cross build the kernel on powerpc using newer binutils
Differential Revision: https://reviews.freebsd.org/D926
Differential Revision: https://reviews.freebsd.org/D928
These are needed for the forthcoming vxlan implementation. The context
pointer means we do not have to use a spare pointer field in the inpcb,
and the source address is required to populate vxlan's forwarding table.
While I highly doubt there is an out of tree consumer of the UDP
tunneling callback, this change may be a difficult to eventually MFC.
Phabricator: https://reviews.freebsd.org/D383
Reviewed by: gnn
Main user-visible changes are related to tables:
* Tables are now identified by names, not numbers.
There can be up to 65k tables with up to 63-byte long names.
* Tables are now set-aware (default off), so you can switch/move
them atomically with rules.
* More functionality is supported (swap, lock, limits, user-level lookup,
batched add/del) by generic table code.
* New table types are added (flow) so you can match multiple packet fields at once.
* Ability to add different type of lookup algorithms for particular
table type has been added.
* New table algorithms are added (cidr:hash, iface:array, number:array and
flow:hash) to make certain types of lookup more effective.
* Table value are now capable of holding multiple data fields for
different tablearg users
Performance changes:
* Main ipfw lock was converted to rmlock
* Rule counters were separated from rule itself and made per-cpu.
* Radix table entries fits into 128 bytes
* struct ip_fw is now more compact so more rules will fit into 64 bytes
* interface tables uses array of existing ifindexes for faster match
ABI changes:
All functionality supported by old ipfw(8) remains functional.
Old & new binaries can work together with the following restrictions:
* Tables named other than ^\d+$ are shown as table(65535) in
ruleset in old binaries
Internal changes:.
Changing table ids to numbers resulted in format modification for
most sockopt codes. Old sopt format was compact, but very hard to
extend (no versioning, inability to add more opcodes), so
* All relevant opcodes were converted to TLV-based versioned IP_FW3-based codes.
* The remaining opcodes were also converted to be able to eliminate
all older opcodes at once
* All IP_FW3 handlers uses special API instead of calling sooptcopy*
directly to ease adding another communication methods
* struct ip_fw is now different for kernel and userland
* tablearg value has been changed to 0 to ease future extensions
* table "values" are now indexes in special value array which
holds extended data for given index
* Batched add/delete has been added to tables code
* Most changes has been done to permit batched rule addition.
* interface tracking API has been added (started on demand)
to permit effective interface tables operations
* O(1) skipto cache, currently turned off by default at
compile-time (eats 512K).
* Several steps has been made towards making libipfw:
* most of new functions were separated into "parse/prepare/show
and actuall-do-stuff" pieces (already merged).
* there are separate functions for parsing text string into "struct ip_fw"
and printing "struct ip_fw" to supplied buffer (already merged).
* Probably some more less significant/forgotten features
MFC after: 1 month
Sponsored by: Yandex LLC
Move the SCTP syscalls to netinet with the rest of the SCTP code.
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: tuexen, rrs
Obtained from: Juniper Networks, Inc.
syscalls themselves are tightly coupled with the network stack and
therefore should not be in the generic socket code.
The following four syscalls have been marked as NOSTD so they can be
dynamically registered in sctp_syscalls_init() function:
sys_sctp_peeloff
sys_sctp_generic_sendmsg
sys_sctp_generic_sendmsg_iov
sys_sctp_generic_recvmsg
The syscalls are also set up to be dynamically registered when COMPAT32
option is configured.
As a side effect of moving the SCTP syscalls, getsock_cap needs to be
made available outside of the uipc_syscalls.c source file. A proper
prototype has been added to the sys/socketvar.h header file.
API tests from the SCTP reference implementation have been run to ensure
compatibility. (http://code.google.com/p/sctp-refimpl/source/checkout)
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: tuexen, rrs
Obtained from: Juniper Networks, Inc.
It allows to push out some final data from the send queue to the socket
before its close. In particular, it increases chances for logout response
to be delivered to the initiator.
Refactor the code and stop restore_object from creating two transactions.
Illumos issue:
3693 restore_object uses at least two transactions to restore an object
MFC after: 2 weeks
* Add a bus_if.m method - get_domain() - returning the VM domain or
ENOENT if the device isn't in a VM domain;
* Add bus methods to print out the domain of the device if appropriate;
* Add code in srat.c to save the PXM -> VM domain mapping that's done and
expose a function to translate VM domain -> PXM;
* Add ACPI and ACPI PCI methods to check if the bus has a _PXM attribute
and if so map it to the VM domain;
* (.. yes, this works recursively.)
* Have the pci bus glue print out the device VM domain if present.
Note: this is just the plumbing to start enumerating information -
it doesn't at all modify behaviour.
Differential Revision: D906
Reviewed by: jhb
Sponsored by: Norse Corp
This partitular case is the only path where the mbuf could be NULL.
udp_append() checked for a NULL mbuf only after invoking the tunneling
callback. Our only in tree tunneling callback - SCTP - assumed a non
NULL mbuf, and it is a bit odd to make the callbacks responsible for
checking this condition.
This also reduces the differences between the IPv4 and IPv6 code.
MFC after: 1 month
The M_FLOWID flag should be propagated to the new mbuf pkthdr in
m_move_pkthdr() and m_dup_pkthdr(). The new mbuf already got the
existing flowid value, but would be ignored since the flag was
not set.
Phabricator: https://reviews.freebsd.org/D914
Reviewed by: adrian
Obtained from: NetApp
MFC after: 1 week
1. ERESTART is not only returned when the revoke count changed. It
is also returned when a signal is received. While a change in
the revoke count should be ignored, a signal should not.
2. Waiting until the output queue is entirely drained can cause a
hang when the underlying device is stuck or broken.
Have tty_drain() take care of this by telling it when we're leaving.
When leaving, tty_drain() will use a timed wait to address point 2
above and it will check the revoke count to handle point 1 above.
The timeout is set to 1 second, which is arbitrary and long enough
to expect a change in the output queue.
Discussed with: jilles@
Reported by: Yamagi Burmeister <lists@yamagi.org>
outer header, consider it as new packet and clear the protocols flags.
This fixes problems when IPSEC traffic goes through various tunnels and router
doesn't send ICMP/ICMPv6 errors.
PR: 174602
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
a running event each time it executes a callout function. The event
includes the function pointer, argument, and whether or not it was run from
hardware interrupt context. The callwheel is marked idle when each handler
completes. This effectively logs the duration of each callout routine in
the graph.
consistent with the amount of data provided in the SCTP_RESET_STREAMS
socket option.
Thanks to Peter Bostroem from Google for drawing my attention to
this part of the code.
where as there are limited number(32) of mfi commands in the pool.
The mfi command pool is now restricted to 27 simultaneous accesses by using
a counting semaphore while calling the passthru function.
In the mrsas_cam.c source file there was a same function name mrsas_poll(),
which was same as the mrsas_poll() implemented in the mrsas.c file for the
polling interface.
To clearly distinguish the functionality by usage we have renamed the former
as mrsas_cam_poll().
In the passthru function let's say it has got an mfi command from the pool
but it has failed in one of the DMA function call which will lead to leak
an mfi command because in the ERROR case it directly returns and not freeing up
the occupied mfi command.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
It is meant to notify the applications which will be waiting for some
controller events to be occured.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
This Driver will create multiple MSI-x vector depending upon what FW expose.
As of now 12 Gbp/s MR controller (Invader and Fury) expose 96 msix vector.
As of now 6 Gbp/s MR controller (Thunderbolt) expose 16 msix vector.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
snv add, so I have added $FreeBSD$ as comment.
This commit is contininous of last mrsas commit, so that compilation
does not break.
Obtained from: AVAGO Technologies
MFC after: 2 weeks
machine, for which 32bit compatibilty code has been added.
As in linux there is only one device entry that is used to fire IOCTL commands,
a new device entry megaraid_sas_ioctl_node is added for solely this
purpose.
From one dev node i.e mrgaraid_sa_ioctl_node we have to find out the
controller instance in case of multicontroller, for which one management info
structure has been added.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
E.g: If the user wants to create more than 64VD on a controller,
it is not possible on current firmware/driver.
New feature and requirement to support upto 256VD, firmware/driver/apps need changes.
In addition to that, there must be a backward compatibility of the new driver with the
older firmware and vice versa.
RAID map is the interface between Driver and FW to fetch all required
fields(attributes) for each Virtual Drives.
In the earlier design driver was using the FW copy of RAID map where as
in the new design the Driver will keep the RAID map copy of its own; on which
it will operate for any raid map access in fast path.
Local driver raid map copy will provide ease of access through out the code
and provide generic interface for future FW raid map changes.
For the backward compatibility driver will notify FW that it supports 256VD
to the FW in driver capability field.
Based on the controller properly returned by the FW, the Driver will know
whether it supports 256VD or not and will copy the RAID map accordingly.
At any given time, driver will always have old or new Raid map.
Reviewed by : ambrisko
MFC after : 2 weeks
Sponsored by: AVAGO Technologies
These controllers seem to have the same feature of AR813x/AR815x and
improved RSS support(4 TX queues and 8 RX queues). alc(4) supports
all hardware features except RSS. I didn't implement RX checksum
offloading for AR816x/AR817x just because I couldn't get
confirmation from the Vendor whether AR816x/AR817x corrected its
predecessor's RX checksum offloading bug on fragmented packets.
This change adds supports for the following controllers.
o AR8161 PCIe Gigabit Ethernet controller
o AR8162 PCIe Fast Ethernet controller
o AR8171 PCIe Gigabit Ethernet controller
o AR8172 PCIe Fast Ethernet controller
o Killer E2200 Gigabit Ethernet controller
Tested by: Many
Relnotes: yes
MFC after: 2 weeks
HW donated by: Qualcomm Atheros Communications, Inc.
from xnu sources. If we encounter a network where ICMP is blocked
the Needs Frag indicator may not propagate back to us. Attempt to
downshift the mss once to a preconfigured value.
Default this feature to off for now while we do not have a full PLPMTUD
implementation in our stack.
Adds the following new sysctl's for control:
net.inet.tcp.pmtud_blackhole_detection -- turns on/off this feature
net.inet.tcp.pmtud_blackhole_mss -- mss to try for ipv4
net.inet.tcp.v6pmtud_blackhole_mss -- mss to try for ipv6
Adds the following new sysctl's for monitoring:
-- Number of times the code was activated to attempt a mss downshift
net.inet.tcp.pmtud_blackhole_activated
-- Number of times the blackhole mss was used in an attempt to downshift
net.inet.tcp.pmtud_blackhole_min_activated
-- Number of times that we failed to connect after we downshifted the mss
net.inet.tcp.pmtud_blackhole_failed
Phabricator: https://reviews.freebsd.org/D506
Reviewed by: rpaulo bz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks
cannot be sent to the chip because a prerequisite L2 resolution
failed.
Submitted by: Hariprasad at chelsio dot com (original version)
MFC after: 2 weeks.
E5372 with different product IDs.
Interestingly, the standard E5372 IDs (12d1:1506) are currently listed in
u3g.c and are the same as the E3131. However, the R215/E5372 is an NCM
device and works well with cdce(4) whereas the E3131 isn't. More work
may be needed to better identify the other device IDs.
MFC after: 1 week
events we have actually counted 'Branch Instruction Retired' when people
asked for 'Unhalted core cycles' using the 'unhalted-core-cycles' event mask
mnemonic.
Reviewed by: jimharris
Discussed with: gnn, rwatson
MFC after: 3 days
Sponsored by: DARPA/AFRL
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
headroom determines how much data is scanned on a single list
during each run of the l2arc feed thread.
Because FreeBSD has more lists we proportionally decrease the limit.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
L2ARC_WRITE_SIZE determines the default value of l2arc_write_max which
defines limits on how much data is scanned and written to a cache device
during each run of the l2arc feed thread. The limits are applied on the
per buffer list basis.
Because FreeBSD has more lists we proportionally reduce the limits.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
* Ensure we're flushing entries without any locks held.
* Free memory in (rare) case when interface tracker fails to register ifp.
* Add KASSERT on table values refcounts.
