This fixes two problems, one where epoch calls could occur before all
the readers had exited the epoch section, and one where the epoch calls
could be unnecessarily delayed.
Approved by: re (glebius)
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
becomes -1, except these are unsigned integers, so they become very large
numbers. Thus are always larger than the maximum bucket; the hash table
insertion fails causing NAT to fail.
This commit ensures that if the index is already zero it is not reduced
prior to insertion into the hash table.
PR: 208566
are situated next to error counters and/or in one instance prior to the
-1 return from various functions. This was useful in diagnosis of
PR/208566 and will be handy in the future diagnosing NAT failures.
PR: 208566
MFC after: 3 days
Bring in https://github.com/jedisct1/libsodium at
461ac93b260b91db8ad957f5a576860e3e9c88a1 (August 7, 2018), unmodified.
libsodium is derived from Daniel J. Bernstein et al.'s 2011 NaCl
("Networking and Cryptography Library," pronounced "salt") software library.
At the risk of oversimplifying, libsodium primarily exists to make it easier
to use NaCl. NaCl and libsodium provide high quality implementations of a
number of useful cryptographic concepts (as well as the underlying
primitics) seeing some adoption in newer network protocols.
I considered but dismissed cleaning up the directory hierarchy and
discarding artifacts of other build systems in favor of remaining close to
upstream (and easing future updates).
Nothing is integrated into the build system yet, so in that sense, no
functional change.
in ipf_nat_checkout() and report it in the frb_natv4out and frb_natv4in
dtrace probes.
This is currently being used to diagnose NAT failures in PR/208566. It's
rather handy so this commit makes it available for future diagnosis and
debugging efforts.
PR: 208566
MFC after: 1 week
is defined in sys/socket.h where it's defined as 28.
A bit of trivia: On NetBSD AF_INET6 is defined as 24. On Solaris it is
defined as 26. This is probably why Darren defaulted to 26, because
ipfilter was originally written for SunOS 4 and Solaris many moons ago.
MFC after: 2 weeks
The nvlist_append_{bool,number,string,nvlist,descriptor}_array() functions
allows to dynamically extend array stored in the nvlist.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
When we are removing element form the nvlist we should also clean parent,
because the array is not a part of the nvlist anymore.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
All information which are need for those operations is already stored in
the cookie.
We decided not to bump libnv version because this API is not used yet in the
base system.
Reviewed by: pjd
If we fail noise floor calibration then we may end up with a deaf NIC
which we can't recover without a full chip reset.
Earlier chips seem to get less stuck in this condition versus AR9280/later
and AR9300/later, but whilst here just fix up the AR5212 era chips to also
return NF calibration failures.
This HAL routine would only return failure if the channel was not configured.
This is a no-op until the driver side code for doing resets and the HAL
code for being told about the reset type (and then handling it!) is
implemented.
Tested:
* AR9280, STA mode
* AR2425, STA mode
* AR9380, STA mode
Plenty of allocation sites pass M_ZERO and sizes which are small and known
at compilation time. Handling them internally in malloc loses this information
and results in avoidable calls to memset.
Instead, let the compiler take the advantage of it whenever possible.
Discussed with: jeff
I'm in the process of reworking how the reset path works with an eye
to better recovery when the chips hang and/or go RF/PHY deaf.
This is the first step in a lot of unification and API changes.
* Change ena-com BIT macro to work on unsigned value.
To make the shifting operations safer, they should be working on
unsigned values.
* Fix a mutex not owned ASSERT panic in ENA control path.
A thread calling cv_broadcast()/cv_signal() must hold the mutex used for
cv_wait(). Fix the ENA control path code that has this problem.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Tested by: Michal Krawczyk <mk@semihalf.com>
It should fix ck_pr_[load|store]_ptr on mips and riscv, make sure no
*fence instructions are used on i386, as older cpus don't support it, and
make sure we don't rely on gcc builtins that can lead to calls to
libatomic when linked with -O0.
MFC after: 1 week
Drop our local patch and restore full vanilla upstream code in
contrib/libb2.
No functional change intended. explicit_bzero() should continue to be used.
Obtained from: libb2 b4b241a34824b51956a7866606329a065d397525
Sponsored by: Dell EMC Isilon
Includes our local patch to conditionalize use of __builtin_clz(ll) on
Clang's __has_builtin() (which is just defined to false when building with
GCC).
The issue is tracked upstream at https://github.com/facebook/zstd/pull/884 .
Otherwise, these are vanilla Zstandard 1.3.4 files.
Reported by: allanjude, Yann Collet
Sponsored by: Dell EMC Isilon
The upstream repository is on github BLAKE2/libb2. Files landed in
sys/contrib/libb2 are the unmodified upstream files, except for one
difference: secure_zero_memory's contents have been replaced with
explicit_bzero() only because the previous implementation broke powerpc
link. Preferential use of explicit_bzero() is in progress upstream, so
it is anticipated we will be able to drop this diff in the future.
sys/crypto/blake2 contains the source files needed to port libb2 to our
build system, a wrapped (limited) variant of the algorithm to match the API
of our auth_transform softcrypto abstraction, incorporation into the Open
Crypto Framework (OCF) cryptosoft(4) driver, as well as an x86 SSE/AVX
accelerated OCF driver, blake2(4).
Optimized variants of blake2 are compiled for a number of x86 machines
(anything from SSE2 to AVX + XOP). On those machines, FPU context will need
to be explicitly saved before using blake2(4)-provided algorithms directly.
Use via cryptodev / OCF saves FPU state automatically, and use via the
auth_transform softcrypto abstraction does not use FPU.
The intent of the OCF driver is mostly to enable testing in userspace via
/dev/crypto. ATF tests are added with published KAT test vectors to
validate correctness.
Reviewed by: jhb, markj
Obtained from: github BLAKE2/libb2
Differential Revision: https://reviews.freebsd.org/D14662
Link __bswap[ds]i2() intrinsics in to libzstd for riscv, where the C runtime
apparently lacks such intrinsics.
Broken in r330894.
Reported by: asomers
Sponsored by: Dell EMC Isilon
