Commit Graph

16 Commits

Author SHA1 Message Date
Kirk McKusick
5cc52631b3 Rewrite the disk I/O management system in fsck_ffs(8). Other than
making fsck_ffs(8) run faster, there should be no functional change.

The original fsck_ffs(8) had its own disk I/O management system.
When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8)
to do the necessary gjournal rollback. Rather than use the existing
fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly
when journalled soft updates were added in FreeBSD 9, code was added
to fsck_ffs(8) to do the necessary journal rollback. And once again,
rather than using either of the existing fsck_ffs(8) disk I/O
systems, it wrote its own from scratch. Lastly the fsdb(8) utility
uses the fsck_ffs(8) disk I/O management system. In preparation for
making the changes necessary to enable snapshots to be taken when
using journalled soft updates, it was necessary to have a single
disk I/O system used by all the various subsystems in fsck_ffs(8).

This commit merges the functionality required by all the different
subsystems into a single disk I/O system that supports all of their
needs. In so doing it picks up optimizations from each of them
with the results that each of the subsystems does fewer reads and
writes than it did with its own customized I/O system. It also
greatly simplifies making changes to fsck_ffs(8) since everything
goes through a single place. For example the ginode() function
fetches an inode from the disk. When inode check hashes were added,
they previously had to be checked in the code implementing inode
fetch in each of the three different disk I/O systems. Now they
need only be checked in ginode().

Tested by:    Peter Holm
Sponsored by: Netflix
2021-01-07 15:03:15 -08:00
Kirk McKusick
85ee267a3e Update the libufs cgget() and cgput() interfaces to have a similar
API to the sbget() and sbput() interfaces. Specifically they take
a file descriptor pointer rather than the struct uufsd *disk pointer
used by the libufs cgread() and cgwrite() interfaces. Update fsck_ffs
to use these revised interfaces.

No functional changes intended.

Sponsored by: Netflix
2020-09-19 22:48:30 +00:00
Kyle Evans
c3e9752ea1 fsck_ffs/fsdb: fix -fno-common build
This one is also a small list:

- 3x duplicate definition (ufs2_zino, returntosingle, nflag)
- 5x 'needs extern', 3/5 of which are referenced in fsdb

-fno-common will become the default in GCC10/LLVM11.

MFC after:	1 week
2020-03-29 20:03:46 +00:00
Kirk McKusick
9fc5d538fc In preparation for adding inode check-hashes, clean up and
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.

Convert the utilities that had been using the undocumented
interface to use the new documented interface.

No functional change (as for now the libufs library does not
do inode check-hashes).

Reviewed by:  kib
Tested by:    Peter Holm
Sponsored by: Netflix
2018-11-13 21:40:56 +00:00
Kirk McKusick
a6bbdf81b5 More throughly integrate libufs into fsck_ffs by using its cgput()
routine to write out the cylinder groups rather than recreating the
calculation of the cylinder-group check hash in fsck_ffs.

No functional change intended.
2018-01-24 23:57:40 +00:00
Kirk McKusick
72f854ce8f Correct fsck journal-recovery code to update a cylinder-group
check-hash after making changes to the cylinder group. The problem
was that the journal-recovery code was calling the libufs bwrite()
function instead of the cgput() function. The cgput() function updates
the cylinder-group check-hash before writing the cylinder group.

This change required the additions of the cgget() and cgput() functions
to the libufs API to avoid a gratuitous bcopy of every cylinder group
to be read or written. These new functions have been added to the
libufs manual pages. This was the first opportunity that I have had
to use and document the use of the EDOOFUS error code.

Reviewed by: kib
Reported by: emaste and others
2018-01-17 17:58:24 +00:00
Pedro F. Giffuni
8a16b7a18f General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Ed Maste
1dc349ab95 prefix UFS symbols with UFS_ to reduce namespace pollution
Specifically:
  ROOTINO -> UFS_ROOTINO
  WINO -> UFS_WINO
  NXADDR -> UFS_NXADDR
  NDADDR -> UFS_NDADDR
  NIADDR -> UFS_NIADDR
  MAXSYMLINKLEN_UFS[12] -> UFS[12]_MAXSYMLINKLEN (for consistency)

Also prefix ext2's and nandfs's NDADDR and NIADDR with EXT2_ and NANDFS_

Reviewed by:	kib, mckusick
Obtained from:	NetBSD
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D9536
2017-02-15 19:50:26 +00:00
Matthew D Fleming
623d7cb663 Fix fsck_ffs build with a 64-bit ino_t.
Original code by:	Gleb Kurtsou
2012-09-27 23:30:58 +00:00
Eitan Adler
eb450775e0 Fix warning when compiling with gcc46:
error: variable 'blksfree' set but not used

Reviewed by:	pjd
Approved by:	dim
MFC after:	3 days
2012-01-10 02:59:50 +00:00
Jeff Roberson
113db2dddb - Merge soft-updates journaling from projects/suj/head into head. This
brings in support for an optional intent log which eliminates the need
   for background fsck on unclean shutdown.

Sponsored by:   iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
Antoine Brodin
13e403fdea (S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.

PR:		137213
Submitted by:	Eygene Ryabinkin (initial version)
MFC after:	1 month
2009-12-28 22:56:30 +00:00
Pawel Jakub Dawidek
2b2dc3a904 Correct comment. 2009-06-03 09:23:31 +00:00
Ruslan Ermilov
1675d675a7 Fix -fstrict-aliasing warning. 2006-11-01 10:56:33 +00:00
Pawel Jakub Dawidek
1a39ef9574 Forgot to add file with gjournal specific fsck code.
Sponsored by:	home.pl
2006-10-31 22:21:01 +00:00