Remove confusing backwards compatibility code that allowed driver to be
used in pre-4.4 releases. The 3COM card's use -link2 to switch tranceivers.
(no functional changes here)
This code will only be included in your kernel if you have
'options DEVRANDOM', but that will fall away in a couple of days.
Obtained from: Theodore Ts'o, Linux
the new seeprom format and negotiate up to 20MHz sync if set in SCSI-Select.
Reduce the complexity of the timeout code by running it at splhigh(). Fix
a bug that caused rescheduled timeouts at 0 clock ticks in the future causing
an infinite loop.
Obtained from: Timeout bug noticed by David Greenman and wcarchive.
Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
Fix the tests for being a console by reverting to the ones that
were used before the the RB_SERIAL changes. RB_SERIAL only needs
to be tested in one place. The initialization of comconsole was
wrong before the RB_SERIAL changes for the COMCONSOLE case. This
may have been the cause of the unnecessary changes.
Start eliminating #includes of <i386/i386/cons.h>. This header is
supposed to be included from <machine> although it should be
completely machine-independent and included from <sys>.
Remove a wrong XXX comment. `comconsole' is used to test for being
a console and even the tests for deciding the default termios state
are necessary (the semi-reentrant i/o routines don't handle ordinary
device i/o).
cy.c:
Sync with sio.c. The console tests are present but always fail.
handler (remove SA_NODEFER).
On the other hand, signal() case should set sa_flags to SA_NODEFER as
in previous change.
In addition, added #ifdef'd code for signal() to or in SA_RESETHAND
flag for when that compatability is implemented.
accesses after the BIOS bus scan. The previous revision made the assumption,
that every PCI motherboard did ...
Change the test on the initial value of the CONF1_ADDR_PORT register in a way
that makes the probe succeed on triton based motherboards, without breaking
the EISA motherboard that has some non-PCI register at the same address.
This is truly a hack. The idea is taken from the Linux ibcs2 emulator.
To use this feature, you must use the option,
options SPX_HACK
in your config.
Also, in /compat/ibcs2/dev, you must do:
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 X0R@ -> /dev/null
lrwxr-xr-x 1 root wheel 7 Oct 15 22:20 nfsd@ -> socksys
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 socksys@ -> /dev/null
crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx
Do NOT use old socksys driver as that has been removed.
This hack needs /compat/ibcs2/dev/spx to be any device that does NOT
exist/configured (so the now non-existant spx major/minor works fine).
When an open() is called, the error ENXIO is checked and then the
path is checked. If spx open detected, then a unix socket is opened
to the hardcoded path "/tmp/.X11-unix/X0".
As the Linux hacker author mentioned, the real way would be to detect
the getmsg/putmsg through /dev/X0R and /dev/spx. Until this true
solution is implemented (if ever), I think this hack is important
enough to be put into the tree, even though I don't like it dirtying
up my clean code (which is what #ifdef SPX_HACK is for).
Currently, the emulator defaults to returning "FreeBSD" as the system
name, release "3.2", and version "2.0". Some programs want to make
sure they are on a SYSV 3.2 system and check for 3.X release number.
Use the following defines to override the defaults:
IBCS2_UNAME_SYSNAME
IBCS2_UNAME_RELEASE
IBCS2_UNAME_VERSION
(should be string)
for system name, release, and version, respectively. This allows
someone to compile the emulator into the kernel so it can pretend
to be a specific system if needed.
Require the state of the configuration enable bits to be OFF assuming
that the BIOS left them that way, as it should anyway to avoid bad things
to happen.
The tests themselves are copied from the previous release, with the
exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be
read back as '0', since only DWORD addresses are legal.
I tried to solve the problem of IDE probing compatibility in this version.
When compiled without an ATAPI option, the wd driver is
fully backward compatible with 2.0.5. With ATAPI option,
the wdprobe becomes strictly weaker. That is, if wdprobe works
without ATAPI option, it will always work with it too.
Another problem was with the CD-ROM drive attached as a slave
in the IDE bus, where there is no master. All IDE CD-ROM
drives are shipped in slave configuration, and most users
just plug them in, never thinking about jumpers.
It works fine with ms-dos and ms-windows, and this
version of the driver supports it as well.
The eject op can now load disks. Just repeat it twice,
and the disk will be ejected and then loaded back.
The disc cannot be ejected if it is mounted.
Submitted by: Serge Vakulenko, <vak@cronyx.ru>
nxmmap() returned a bogus value as well as having a bogus type. Some
drivers use nxmmap() for configured devices (`nx' functions should
only be used for unconfigured devices). These drivers allowed mmapping
physical page 6, which may have interesting contents. vm has kludges
to avoid the same bug with nullop() returning page 0 and enodev()
returning page 19 (ENODEV), but didn't handle enxio() returning page 6.
vm is the wrong place to handle these bugs.
free-run and doing a subtract in microtime() rather than resetting the
counter to zero at every clock tick. In combination with the changes to
kern_clock.c, this should eliminate all the immediately obvious sources
of systematic jitter in timekeeping on Pentium machines.
in line with linux alt space of /compat/linux.
This was pointed out by Stefan Esser.
In cheching alt space for libraries in imgact_coff.c, use const
ibcs2_emul_path instead of its own local string. Also do a proper
malloc of temp name according to MAXPATHLEN.
Add new files created for emulator.
Modify NetBSD import to work with FreeBSD and add new features and
code. The complete emulator is essentially a combination of work/code
implemented by Sean Eric Fagan, Soren Schmidt, Scott Bartram, and myself,
Steven Wallace.
Features of this new emulator system include:
o "clean" code, including strict prototyping.
o Auto-generation of ibcs2 system calls, xenix system calls, isc system
calls. Generation includes system tables, structure definitions,
and prototyping of function calls.
o ibcs2 emulator does not rely on any COMPAT_43 system calls.
o embedded socksys support
o ibcs2 msgsys, semsys, shmsys calls supported if supported in kernel
o alternate /emul/ibcs2 namespace searched first for files in ibcs2
system. Usefull to keep sysv libraries, binaries in /emul/ibcs2.
o many other finer details and functions fixed or implemented.
