spl() protection in the case of a copyout error.
Add missing spl calls around the intial activation call that is
done when when the kevent is added.
Add two KASSERT macros to help catch errors in the future.
This means that the kernel can be totally self contained now and is not
dependent on the last buildworld to update /usr/share/mk. This might
also make it easier to build 5.x kernels on 4.0 boxes etc, assuming
gensetdefs and config(8) are updated.
which seems to correspond better with what a busy plex needs. This
may also help us avoid race conditions when expanding the table which
may have been contributing to the random corruption, panics and hangs
we've been seeing in RAID-5 plexes, particularly with ata drives.
Eagerly-awaited-by: sos
Get counting volume I/Os right.
launch_requests: Be macho, throw away the safety net and walk the
tightrope with no splbio().
Add some comments explaining the smoke and mirrors.
Remove some redundant braces.
sdio: Set the state of an accessed but down subdisk correctly. This
appears to duplicate an earlier commit that I hadn't seen.
Get counting volume I/Os right.
Count buffer sizes correctly for architectures where ints are not 32 bits.
complete_rqe: Move decrementing active count until after call to
complete_raid5_write, thus possibly avoiding a race condition.
Suggested-by: dillon
Rename user bp to ubp to avoid confusion.
Tidy up comments.
PRs!" So here I go.
Add definitions for some of the AMD CPU feature bits. Also add a comment on
where to find the rest of them. This is a purely cosmetic change.
PR: i386/14438
Submitted by: Kelly Yancey <kbyanc@egroups.net>
is used to control whether the debug messages are output at runtime.
It defaults to on so that if you define BUS_DEBUG in your kernel
then you get all the debugging info when you boot.
It's very useful for disabling all the debugging info when you're
developing a loadable device driver and you're doing lots of loads
and unloads but don't always want to see all the debugging info.
a struct buf. Don't try to examine B_ASYNC, it is a layering violation
to do so. The only current user of this interface is vn(4) which, since
it emulates a disk interface, operates on struct bio already.
ioccom.h defines only implementation detail, and should therefore
only be included from the #include which defines the ioctl tags,
in other words: never include it from *.c
provide locking over extended attribute operations, requiring that
individual operations be atomic. Allowing non-zero starting offsets
permits applications/etc to put themselves at risk for inconsistent
behavior. As VOP_SETEXTATTR already prohibited non-zero write offsets,
this makes sense.
Suggested by: Andreas Gruenbacher <a.gruenbacher@bestbits.at>
calling in_pcbbind so that in_pcbbind sees a valid address if no
address was specified (since divert sockets ignore them).
PR: 17552
Reviewed by: Brian
from the sys Makefile's SUBDIRs. This is conditioned in make.conf by the
NO_MODULES variable and the existence of the modules directory. The
actual location of the modules is not modified. Changes in Makefiles
only, this does not affect Peter's recent changes.
Reviewed by: Peter Wemm, who warned me I would get some flack, and
he had the good idea for the NO_MODULES variable.
are two supported chips, the NetChip 1080 (only prototypes available)
and the EzLink cable. Any other cable should be supported however as they
are all very much alike (there is a difference between them wrt
performance).
It uses Netgraph.
This driver was mostly written by Doug Ambrisko and Julian Elischer and
I would like to thank Whistle for yet another contribution. And my
aplogies to them for me sitting on the driver for so long (2 months).
Also, many thanks to Reid Augustin from NetChip for providing me with a
prototype of their 1080 chip.
Be aware of the fact that this driver is very immature and has only been
tested very lightly. If someone feels like learning about Netgraph however
this is an excellent driver to start playing with.
via the MODULE_VERSION() and MODULE_DEPEND() macros that both the loader
and kld system know how to deal with. The old DT_NEEDED tag is still
supported by the loader (and will remain supported for a while) - but the
kernel side presently doesn't know how to deal with DT_NEEDED.
Remove evil allocation macros from machdep.c (why was that there???) and
use malloc() instead.
Move paramters out of param.h and into the code itself.
Move a bunch of internal definitions from public sys/*.h headers (without
#ifdef _KERNEL even) into the code itself.
I had hoped to make some of this more dynamic, but the cost of doing
wakeups on all sleeping processes on old arrays was too frightening.
The other possibility is to initialize on the first use, and allow
dynamic sysctl changes to parameters right until that point. That would
allow /etc/rc.sysctl to change SEM* and MSG* defaults as we presently
do with SHM*, but without the nightmare of changing a running system.
coming later this week. Mitsuru IWASAKI provided a patch to -mobile which
I used to make sure I was doing the right thing but only a small part of
the actual patch was used.
that fails to proberly close the disk.
The problem seems to be that the HP burners sometimes return
ready when they actually are not, the solution is to not use
immediate mode on the closing commands. This is suboptimal
for real burners, in that they now hog the ATA bus for possibly
minutes, where its really not nessesary, *sigh*.
was added accidentally, and although not terrible, it would improperly
hide the bug of calling M_PREPEND with a NULL mbuf argument.
Submitted by: jlemon (ISTR)
wrong for many years that negative niceness would lower the priority
of a process below PUSER, and once below PUSER, there were conditionals
in the code that are required to test for whether a process was in
the kernel which would break.
The breakage could (and did) cause lock-ups, basically nothing else
but the least nice program being able to run in some conditions. The
algorithm which adjusts the priority now subtracts PRIO_MIN to do
things properly, and the ESTCPULIM() algorithm was updated to use
PRIO_TOTAL (PRIO_MAX - PRIO_MIN) to calculate the estcpu.
NICE_WEIGHT is now 1 to accomodate the full range of priorities better
(a -20 process with full CPU time has the priority of a +0 process with
no CPU time). There are now 20 queues (exactly; 80 priorities) for
use in user processes' scheduling, and PUSER has been lowered to 48
to accomplish this.
This means, to the user, that things will be scheduled more correctly
(noticeable), there is no lock-up anymore WRT a niced -20 process
never releasing the CPU time for other processes. In this fair system,
tsleep()ed < PUSER processes now will get the proper higher priority
than priority >= PUSER user processes.
The detective work of this was done by me, along with part of the
solution. Luoqi Chen has provided most of the solution, and really
helped me understand what was happening better, to boot :)
Submitted by: luoqi
Concept reviewed by: bde
not u_long. On i386's with 64-bit longs, returning u_longs indirectly
in (more than) the space reserved for uintptr_t's tended to corrupt the
previous frame pointer in the stack frame, so it was not easy to debug.
The type mismatches are hidden by the bogus cast in DEVMETHOD().
declarations of structs for use in prototypes are only necessary if
the struct is not otherwise declared in scope.
Removed prototypes for fdissequential() and fdsequential(). These
functions never existed in FreeBSD.
Fixed most style bugs in FreeBSD changes (mainly disordered prototypes
and prototypes without parameter names).
Note that if_aue doesn't strictly depend on usb because it uses the
method interface for calls rather than using internal symbols, and
because it's a child driver of usb and therefore will not try and do
anything unless the parent usb code is loaded at some point. if_aue does
strictly depend on miibus as it will fail to link if it is missing.
bus/driver/kobj system. I am not 100% sure that this is the correct fix,
but it is harmless and does seem to solve the problem. At worst, it could
cause a tiny memory leak at unload time - this is better than a free(NULL)
and subsequent panic. I'm waiting for comments from Doug about this.
This may yet be backed out and fixed differently.
The change itself is to increment the reference count on drivers in one
case where it appears to have been missed. When everything is unloaded,
kobj_class_free() was being called twice in some cases, and panicing the
second time.
version dependency system. This isn't quite finished, but it is at a
useful stage to do a functional checkpoint.
Highlights:
- version and dependency metadata is gathered via linker sets, so things
are handled the same for static kernels and code built to live in a kld.
- The dependencies are at module level (versus at file level).
- Dependencies determine kld symbol search order - this means that you
cannot link against symbols in another file unless you depend on it. This
is so that you cannot accidently unload the target out from underneath
the ones referencing it.
- It is flexible enough that we can put tags in #include files and macros
so that we can get decent hooks for enforcing recompiles on incompatable
ABI changes. eg: if we change struct proc, we could force a recompile
for all kld's that reference the proc struct.
- Tangled dependency references at boot time are sorted. Files are
relocated once all their dependencies are already relocated.
Caveats:
- Loader support is incomplete, but has been worked on seperately.
- Actual enforcement of the version number tags is not active yet - just
the module dependencies are live. The actual structure of versioning
hasn't been agreed on yet. (eg: major.minor, or whatever)
- There is some backwards compatability for old modules without metadata
but I'm not sure how good it is.
This is based on work originally done by Boris Popov (bp@freebsd.org),
but I'm not sure he'd recognize much of it now. Don't blame him. :-)
Also, ideas have been borrowed from Mike Smith.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE instructions for these chips.
2 SCRIPTS sets (firmwares) numbered #1 and #2 are
used for the whole support of the 53C8XX family
to get possible:
- FW #1 : Only based on MEMORY MOVE instructions.
Selected for 810, 815, 825.
- FW #2 : LOAD/STORE based. This is the firmware
also used by previous driver versions.
Selected for other chips.
When both `ncr' and `sym' are configured, `sym'
will now attach all the 53C8XX devices by default.
Previous balancing between `ncr' and `sym' can be
preserved by:
- Either editing sym_conf.h and commenting the
following compile option:
#define SYM_CONF_GENERIC_SUPPORT
(This also saves about 3.5Kb of kernel memory).
- Or setting kernel config option
SYM_SETUP_LP_PROBE_MAP to 64 (bit 0x40)
to PPTP) with more generic PacketAliasRedirectProto().
Major number is not bumped because it is believed that noone
has started using PacketAliasRedirectPptp() yet.
reset their grace timer as their ownership crossed the soft limit
threshhold. Thus if they had been over their limit in the past,
they were suddenly penalized as if they had been over their limit
ever since. The fix is to check when root gives away files, that
when the receiving user crosses their soft limit, their grace timer
is reset. See the PR report for a detailed method of reproducing
the bug.
PR: kern/17128
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
Reviewed by: Kirk McKusick <mckusick@mckusick.com>
first. This will fix a few cards that hang on the WD probe. He tells
me that PAO went one step farther and removed the WD proble completely
and none of the cards in the 2.x database broke in PAO3. Since I'm
more conservative in this code, I'm just swapping the order, which he
said also fixed his problem.
Reviewed by: mdodd, iwasaki
Submitted by: sanpai@sanpai.org
The makefile contains a reference to /sys/dev/ppbus. What really should
be done is copy the header files to /usr/include/sys/dev/ppbus.
PR: kern/16767
Submitted by: Jin Guojun (FTG staff) <jin@gracie.lbl.gov>
LSNAT links are first created by either PacketAliasRedirectPort() or
PacketAliasRedirectAddress() and then set up by one or more calls to
PacketAliasAddServer().
program running under linux emulation, the script binary is checked for
in /compat/linux first. Without this patch the wrong script binary
(i.e. the FreeBSD binary) will be run instead of the linux binary.
For example, #!/bin/sh, thus breaking out of linux compatibility mode.
This solves a number of problems people have had installing linux
software on FreeBSD boxes.
This driver should support both the SSI (V.35 etc) E1/T1 unchannelized,
DS3 and HSSI cards. Only tested on the SSI card.
More info at: http://www.lanmedia.com
Thanks to LanMedia for donating two LMC1000P cards.
if_de.c driver modified by: LanMedia
NetGraphification by: Stephen Kiernan <sk-ports@vegamuse.org>
- Fixed bogus CIS tuple dumping (Network node ID, IRQ modes and etc.)
- Include telling drivers ethernet address if Network node ID
tuple is available. This is usefull for some bogus ehter cards which
can't get correct ethernet address from CIS tupple.
Obtained from: PAO3
There's no excuse to have code in synthetic filestores that allows direct
references to the textvp anymore.
Feature requested by: msmith
Feature agreed to by: warner
Move requested by: phk
Move agreed to by: bde
