Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.
Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)
mode at boot time. Multiple profiles can be started at the same time.
The whole idea is very similar to the ppp rc script.
Document Bluetooth knobs in rc.conf(5)
MFC after: 1 week
commands can be written to /dev/psm%d and status can be read back from it.
- Reflect the change in psm(4) and bump version for ports.
MFC after: 1 week
buffer kernel descriptors, which is used to allow the buffer
currently in the BPF "store" position to be assigned to userspace
when it fills, even if userspace hasn't acknowledged the buffer
in the "hold" position yet. To implement this, notify the buffer
model when a buffer becomes full, and check that the store buffer
is writable, not just for it being full, before trying to append
new packet data. Shared memory buffers will be assigned to
userspace at most once per fill, be it in the store or in the
hold position.
This removes the restriction that at most one shared memory can
by owned by userspace, reducing the chances that userspace will
need to call select() after acknowledging one buffer in order to
wait for the next buffer when under high load. This more fully
realizes the goal of zero system calls in order to process a
high-speed packet stream from BPF.
Update bpf.4 to reflect that both buffers may be owned by userspace
at once; caution against assuming this.
o Default to -O on mips as well as arm. -O2 has been strongly implicated
in many problems in the past, so we're taking a conservative approach
until the problems are well understood.
to JB's revision 1.96 change to remove -fno-strict-aliasing from CFLAGS.
This makes the default CFLAGS to match the simple defaults that the
tinderboxes use. By using -fno-strict-aliasing by default we are
choosing to ignore problems in code which had the potential to
shoot ourselves in the foot.
per-profile variables of the form ppp_<profile>_unit. No ppp_unit
variable is supported since tying the same unit to more than one profile
won't work.
PR: conf/122127
MFC after: 1 week
to _ when evaluating ppp_<profile>_nat and ppp_<profile>_mode. Document
the per-profile variables.
PR: conf/121452, conf/122127 (partial)
MFC after: 1 week
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.
Reviewed by: arch
There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
overhead of packet capture by allowing a user process to directly "loan"
buffer memory to the kernel rather than using read(2) to explicitly copy
data from kernel address space.
The user process will issue new BPF ioctls to set the shared memory
buffer mode and provide pointers to buffers and their size. The kernel
then wires and maps the pages into kernel address space using sf_buf(9),
which on supporting architectures will use the direct map region. The
current "buffered" access mode remains the default, and support for
zero-copy buffers must, for the time being, be explicitly enabled using
a sysctl for the kernel to accept requests to use it.
The kernel and user process synchronize use of the buffers with atomic
operations, avoiding the need for system calls under load; the user
process may use select()/poll()/kqueue() to manage blocking while
waiting for network data if the user process is able to consume data
faster than the kernel generates it. Patchs to libpcap are available
to allow libpcap applications to transparently take advantage of this
support. Detailed information on the new API may be found in bpf(4),
including specific atomic operations and memory barriers required to
synchronize buffer use safely.
These changes modify the base BPF implementation to (roughly) abstrac
the current buffer model, allowing the new shared memory model to be
added, and add new monitoring statistics for netstat to print. The
implementation, with the exception of some monitoring hanges that break
the netstat monitoring ABI for BPF, will be MFC'd.
Zerocopy bpf buffers are still considered experimental are disabled
by default. To experiment with this new facility, adjust the
net.bpf.zerocopy_enable sysctl variable to 1.
Changes to libpcap will be made available as a patch for the time being,
and further refinements to the implementation are expected.
Sponsored by: Seccuris Inc.
In collaboration with: rwatson
Tested by: pwood, gallatin
MFC after: 4 months [1]
[1] Certain portions will probably not be MFCed, specifically things
that can break the monitoring ABI.
scripts at boot. This is currently disabled by default. /etc/ddb.conf
contains some potentially reasonable default scripts.
PR: conf/119995
Submitted by: Scot Hetzel <swhetzel at gmail dot com> (Earlier version)
X-MFC after: textdumps
address PR ports/121363 (current day re-opening of PR ports/73797)
to make ports CFLAGS more independent of src/'s CFLAGS WRT aliasing.
Discussed with: brooks
Change the default CFLAGS to match the simple defaults that the
tinderboxes use. By using -fno-strict-aliasing by default we are
choosing to ignore problems in code which had the potential to
shoot ourselves in the foot.
The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies:
1. make buildworld TARGET_ARCH=powerpc
2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX
This default config uses kernel-level FPU emulation. For the soft-float world
approach:
1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500
2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX
3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX
Approved by: cognet (mentor)
MFp4: e500
The logical disks will appear as /dev/lvm/<vol group>-<logical vol>, for
instance /dev/lvm/vg0-home. G_LINUX_LVM currently supports linear stripes with
segments on multiple physical disks. The metadata is read only, logical
volumes can not be allocated or resized.
Reviewed by: Ivan Voras
Previously known as geom_lvm(4), rename requested by des, phk.
- mention LRO support
- describe multi-slice related tunables.
- correct DIAGNOSTICS section to reflect that missing firmware
is non-fatal.
Submitted by: gallatin
The logical disks will appear as /dev/lvm/<vol group>-<logical vol>, for
instance /dev/lvm/vg0-home. GLVM currently supports linear stripes with
segments on multiple physical disks. The metadata is read only, logical
volumes can not be allocated or resized.
Reviewed by: Ivan Voras
NOP-message polling in ciss_periodic().
Note that setting the tunable to non-zero can be workaround only for
`ADAPTER HEARTBEAT FAILED' problem, and may freeze the system w/o
the problem.
Reviewed by: scottl
Reported by: Attila Nagy
MFC after: 3 days
were recently), a simple 'make cleandepend; make depend' is sufficient
to keep the tree buildable after a cvs update when doing incremental
builds.
However, kdump and truss use a script which searches for header files
that define ioctls, and generates C code that includes them. This
script will usually not need updating when a header file is removed,
so the normal dependency mechanism will not realize that it needs to
be re-run. One is therefore left with code that references dead files
but will only be removed by a full 'make clean', which defeats the
purpose of incremental builds.
To work around this, modify the cleandepend target in bsd.dep.mk to
also remove any files listed in a new variable named CLEANDEPFILES,
and modify kdump's and truss's Makefiles accordingly.
MFC after: 2 weeks
- Remove redundant `s' and `S' from yesexpr.
- Add fullwidth latin letters to yesexpr and noexpr (inspired by ja_JP.UTF-8).
- Add korean translated yesexpr (`Ye') and noexpr (`Anio').
- Add yesstr and nostr entries (inspired by zh_CN.*).
- Add UTF-8 encoded file and connect to build.
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.
Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.
Likely break the only non-convetional user of the API, after informing
the relevant committer.
Update the mbuf(9) manual page, which was already out of sync on
this point.
Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.
This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.
This does not affect the memory layout or size of mbufs.
Parental oversight by: sam and rwatson.
No MFC is anticipated.
architectures, so call it "traditional" instead.
- sched_ule is no longer buggy or experimental (according to
rev. 1.7 of sched_ule(4)), so don't call it experimental
(reported by a user on stable@).
Reviewed by: rwatson
tx start threshold ..." Looking around on the mailing lists, and even having
one of these cards I agree the messages should be documented.
Bump doc date.
PR: 88477
it down to where it belongs.
Document 'all-depends-list' target and bump doc date.
PR: 119519
Submitted by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: flz
included in the kernel by default. Remove reference to this option
from defaults/rc.conf and rc.conf(5).
PR: conf/119098
Submitted by: Beat Gaetzi
MFC after: 1 week
4.1 point 6:
Add an entry for yourself to src/share/misc/committers-repository.dot,
where repository is either doc, ports or src, depending on the
commit privileges you obtained.
Approved by: grog@
As ncurses has the limitation that it returns the first matched key symbol,
you can not use END in ncurses based program, like mutt, with xterm.
- Add @8 (kp_enter) definition for xterm so you can use ENTER in xterm with
ncurses based program.
I also found that NetBSD's xterm does the same thing.
PR: 100150
Reported by: Arseny Nasokin <tarc at tarc.po.cs.msu.su>
Discussed with: Thomas Dickey, Ulrich Spoerlein <uspoerlein at gmail.com>
Reviewed by: freebsd-arch@
MFC after: 2 month
definition files that are used only for extracting symbols. This is useful
for inter-module dependencies and files containing only enum-definitions.
MFC after: 4 weeks
"month names" -> "months names"
typo
"Long months names (alternative)" or "in alternative form" ->
"(without case ending)"
"Long months names" -> "Long months names (as in a date)"
to not confuse developers on what purpose those sections are
This option just adds complexity and the new implementation no longer
will support it, so axing it now that it is unused is probabilly the
better idea.
FreeBSD version is bumped in order to reflect the KPI breakage introduced
by this patch.
In the ports tree, kris found that only old OSKit code uses it, but as
it is thought to work only on 2.x kernels serie, version bumping will
solve any problem.
some stock formulas for use.
Update ddb(4) to reference the textdump(4) page, list the textdump
commands, and suggest using them with scripts and output capture.
Update HISTORY section.
Hook up textdump(4) to build.
MFC after: 3 months
cards:
o RocketRAID 172x series
o RocketRAID 174x series
o RocketRAID 2210
o RocketRAID 222x series
o RocketRAID 2240
o RocketRAID 230x series
o RocketRAID 231x series
o RocketRAID 232x series
o RocketRAID 2340
o RocketRAID 2522
Many thanks to Highpoint for their continued support of FreeBSD.
Submitted by: Highpoint
default to the value of MK_KERBEROS unless set explicitly by
WITH_GSSAPI/WITHOUT_GSSAPI. (This introduces another type of
MK_* variables which itself is questionable.)
- Teach tools/build/options/makeman script that generates the
src.conf(5) manpage about the new type of MK_* variables.
- Fix broken logic in lib/Makefile.
RELENG_7, the way to do a cross build changed from specifying only
TARGET_ARCH (which has an ambigous mapping to TARGET) to specifying
only TARGET (which has a unique mapping to TARGET_ARCH). Update the
example to reflect this.
MFC After: 1 week (the example change only)
WITHOUT_KERBEROS knob. While GSS can be used for other things
some third party software (most notably ports/x11/kdelibs3)
takes the presence of libgssapi as an indication that kerberos
is available, and attempts to link with the kerberos libs. If
they are not available, the build will fail.
Because you might want to use GSS but not kerberos, add a knob
to re-enable it if WITHOUT_KERBEROS is present.
Document the new knob, and the new behavior of WITHOUT_KERBEROS.
Not objected and/or generally agreed to by: freebsd-arch
Problem discussed/analyzed in:
PR: ports/116484
Also mention that the driver sometimes returns '10baseTX' as output instead
of 100baseTX (which is the case at that moment).
PR: docs/115284
Submitted by: Julian Stacey Jhs <jhs at berklix dot org>
MFC After: 3 days
Timezone data changes in this import:
- Add America/St_Barthelemy (BL) and America/Marigot (MF)
- Venezuela will move to -4:30 on 9 December 2007 instead of 31 December 2007
MFCs will be done after the code freezes have stopped.
Timezone data changes in this import:
- Add America/St_Barthelemy (BL) and America/Marigot (MF)
- Venezuela will move to -4:30 on 9 December 2007 instead of 31 December 2007
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
defined, or also if "options DDB" is defined to provide compatibility
with existing users of stack(9).
Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to. It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.
Update stack(9) man page.
Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
linker interfaces for looking up function names and offsets from
instruction pointers. Create two variants of each call: one that is
"DDB-safe" and avoids locking in the linker, and one that is safe for
use in live kernels, by virtue of observing locking, and in particular
safe when kernel modules are being loaded and unloaded simultaneous to
their use. This will allow them to be used outside of debugging
contexts.
Modify two of three current stack(9) consumers to use the DDB-safe
interfaces, as they run in low-level debugging contexts, such as inside
lockmgr(9) and the kernel memory allocator.
Update man page.
- added sysctls to if_enc(4) to control whether the firewalls or
bpf will see inner and outer headers or just inner headers
for incoming and outgoing IPsec packets.
- if_enc work with IPv6 now as well.
Reviewed by: brueffer
in the default CFLAGS, we're in the middle of a ports freeze, so we can't
really go making the corresponding change to the ports mk files.
I'll take -fno-strict-aliasing out again when the ports freeze ends.
- Document some EINVAL error returns from PMC_OP_CONFIGURELOG,
PMC_OP_WRITELOG and PMC_OP_FLUSHLOG that were missed earlier.
- Correct a typo: s/PMC_OP_ALLOCATE/PMC_OP_PMCALLOCATE/.
- Describe how log file writing errors are returned by a PMC_OP_FLUSHLOG
request.
function, its options and explaining that recursion for writers can be
selectively enabled.
Reported by: rwatson, Skip Ford <skip at menantico dot com>
PMCs and 'mode' to distinguish between counting and sampling.
- Document PMC row dispositions.
- Document the requirement for PRIV_PMC_MANAGE privilege when issuing
PMC_OP_PMCADMIN requests.
This time, change the default CFLAGS to match the simple defaults that
the tinderboxes use. That is, don't use -fno-strict-aliasing by default.
My last attempt to re-anable -Werror gave me a lesson in what strict
aliasing is all about. There was code in libthr that wasn't 64-bit clean.
The default use of -fno-strict-aliasing hid that.
By using -fno-strict-aliasing by default we were choosing to ignore
problems in code which had the potential to shoot ourselves in the
foot. Sometimes it would be the 64-bit foot. I have both feet. The left
ones are 32 bits and the right ones are 64 bits. Don't ask about my
endian orientation. :-)
The -fno-strict-aliasing compiler arg can still be used if NO_STRING_ALIASING
is define in make.
We are early in the FreeBSD 8 development, so we have the opportunity to
wait and see if this works for us. I am sure that people will complain.
We can easily revert this. All I ask is that we take sides: clean code or
not. YMMV.
Note that by using -fno-strict-aliasing the build won't actually break.
Only where WARNS is set (and -Werror is used) will a compiler warning break
the build. The use of WARNS levels implies (to me at least) that the
developer has taken some care to make the code pass basic checks. This
commit makes those checks just a little bit more strict.
request are 32 bit values, and are not necessarily small.
- Note that the PMC_F_KGMON flag is currently unimplemented.
- Tweak description of an EINVAL error return.
- Add an "AUTHORS" section.
obstacle to enabling -Werror. I'll continue to work on cleaning up the
code so that we can keep this enabled.
If the tinderboxes would just use the default CFLAGS set in this file,
all would be fine and we'd be able to make use of -Werror.
upgrading to new releases. Important parts of this code include
* automatically determining which optional components (e.g., src,
info, proflibs) are installed.
* merging changes in files which are modified locally and have
changed between the currently running and new release.
* prompting the user to rebuild all 3rd party software before
deleting old shared libraries.
Yes, this is compatible with "freebsd-update rollback" -- you can
test a new -BETA and roll back to the old release if you don't
like it.
Subject to re@ approval, this will be MFCed before 7.0-BETA3 and
6.3-RC1.
MFC after: 2 days
* Correct spelling and grammar
* Re-structure sentences in BUGS section for legibility
* Break long lines appropriately
* Break lines at full stops
* Add mdoc(9) commands where applicable
* Remove superfluous .Ft in the SYNOPSIS section
* Various other mdoc(9) fixes
This includes:
o mtree (for legal/intel_wpi)
o manpage for i386/amd64 archs
o module for i386/amd64 archs
o NOTES for i386/amd64 archs
Approved by: mlaier (comentor)
lock optimized for almost exclusive reader access. (see also rmlock.9)
TODO:
Convert to per cpu variables linkerset as soon as it is available.
Optimize UP (single processor) case.
This import includes:
o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi)
o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE)
o wpifw Firmware driver (sys/modules/wpifw)
Approved by: mlaier, sam (co-mentors)
changes:
01 - Enhanced LRO:
LRO feature is extended to support multi-buffer mode. Previously,
Ethernet frames received in contiguous buffers were offloaded.
Now, frames received in multiple non-contiguous buffers can be
offloaded, as well. The driver now supports LRO for jumbo frames.
02 - Locks Optimization:
The driver code was re-organized to limit the use of locks.
Moreover, lock contention was reduced by replacing wait locks
with try locks.
03 - Code Optimization:
The driver code was re-factored to eliminate some memcpy
operations. Fast path loops were optimized.
04 - Tag Creations:
Physical Buffer Tags are now optimized based upon frame size.
For better performance, Physical Memory Maps are now re-used.
05 - Configuration:
Features such as TSO, LRO, and Interrupt Mode can be configured
either at load or at run time. Rx buffer mode (mode 1 or mode 2)
can be configured at load time through kenv.
06 - Driver Statistics:
Run time statistics are enhanced to provide better visibility
into the driver performance.
07 - Bug Fixes:
The driver contains fixes for the problems discovered and
reported since last submission.
08 - MSI support:
Added Message Signaled Interrupt feature which currently uses 1
message.
09 Removed feature:
Rx 3 buffer mode feature has been removed. Driver now supports 1,
2 and 5 buffer modes of which 2 and 5 buffer modes can be used
for header separation.
10 Compiler warning:
Fixed compiler warning when compiled for 32 bit system.
11 Copyright notice:
Source files are updated with the proper copyright notice.
MFC after: 3 days
Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>,
Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
selected interface. wpa_supplicant does not only handle WPA
authentication but also EAP/LEAP as well as WEP encryption or no
encryption at all. The patch clarifies this.
PR: 117046
Submitted by: lme
Reviewed by: bruffer
Approved by: jkois (mentor)
__MAKE_SHELL variable. This feature isn't supposed to be in wide
use, but it's needed now to make `installworld' independent of the
stock binaries and libs so that radical ABI changes can go in safely.
Reviewed by: ru
test MK_INSTALLLIB, users can set WITHOUT_INSTALLLIB. The old
NO_INSTALLLIB is still supported as several makefiles set it.
- While here, fix an install when instructed not to install libs
(usr.bin/lex/lib/Makefile).
PR: bin/114200
Submitted by: Henrik Brix Andersen
- Check for duplicated symbols and suggest moving them to ObsoleteVersions.
- Improve and unify error handling.
- Make the regular expressions more uniform, robust, and less sensitive
to harmless variations in the input such as those to whitespace amount.
Reviewed by: deischen
Tested with: md5 (Version.map files in /usr/obj stay the same)
It can be missed easily that the following blank line formally
belongs to the xterm-basic entry due to the unneeded backslash.
PR: bin/80256 (audit trail)
make sure to never call sched_bind() for uninitialised CPUs.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
Timezone data changes in the following locations:
- Egypt (push possible DST ending one year ahead)
- Iran gets DST again in 2008.
- Palestine DST time for this year fixed.
- Brasils DST rule change in 2008.
- Venezuela time moves half an hour back at the end of this year.
PR: conf/116900
Approved by: re (Ken Smith), grog@ (mentor)
MFC after: 1 week
Timezone data changes in the following locations:
- Egypt (push possible DST ending one year ahead)
- Iran gets DST again in 2008.
- Palestine DST time for this year fixed.
- Brasils DST rule change in 2008
- Venezuela time moves half an hour back at the end of this year.
I also took the chance to make the list of supported devices a
bit more compact, as it was really long to read.
Even though re@ and Warner only saw the diffs for the code, i expect
their approval also covered the manpage update.
Approved by: re, imp (implicitly i hope)
MFC after: 3 days
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
to gem_attach() as the former access softc members not yet initialized
at that time and gem_reset() actually is enough to stop the chip. [1]
o Revise the use of gem_bitwait(); add bus_barrier() calls before calling
gem_bitwait() to ensure the respective bit has been written before we
starting polling on it and poll for the right bits to change, f.e. even
though we only reset RX we have to actually wait for both GEM_RESET_RX
and GEM_RESET_TX to clear. Add some additional gem_bitwait() calls in
places we've been missing them according to the GEM documentation.
Along with this some excessive DELAYs, which probably only were added
because of bugs in gem_bitwait() and its use in the first place, as
well as as have of an gem_bitwait() reimplementation in gem_reset_tx()
were removed.
o Add gem_reset_rxdma() and use it to deal with GEM_MAC_RX_OVERFLOW errors
more gracefully as unlike gem_init_locked() it resets the RX DMA engine
only, causing no link loss and the FIFOs not to be cleared. Also use it
deal with GEM_INTR_RX_TAG_ERR errors, with previously were unhandled.
This was based on information obtained from the Linux GEM and OpenSolaris
ERI drivers.
o Turn on workarounds for silicon bugs in the Apple GMAC variants.
This was based on information obtained from the Darwin GMAC and Linux GEM
drivers.
o Turn on "infinite" (i.e. maximum 31 * 64 bytes in length) DMA bursts.
This greatly improves especially RX performance.
o Optimize the RX path, this consists of:
- kicking the receiver as soon as we've a spare descriptor in gem_rint()
again instead of just once after all the ready ones have been handled;
- kicking the receiver the right way, i.e. as outlined in the GEM
documentation in batches of 4 and by pointing it to the descriptor
after the last valid one;
- calling gem_rint() before gem_tint() in gem_intr() as gem_tint() may
take quite a while;
- doubling the size of the RX ring to 256 descriptors.
Overall the RX performance of a GEM in a 1GHz Sun Fire V210 was improved
from ~100Mbit/s to ~850Mbit/s.
o In gem_add_rxbuf() don't assign the newly allocated mbuf to rxs_mbuf
before calling bus_dmamap_load_mbuf_sg(), if bus_dmamap_load_mbuf_sg()
fails we'll free the newly allocated mbuf, unable to recycle the
previous one but a NULL pointer dereference instead.
o In gem_init_locked() honor the return value of gem_meminit().
o Simplify gem_ringsize() and dont' return garbage in the default case.
Based on OpenBSD.
o Don't turn on MAC control, MIF and PCS interrupts unless GEM_DEBUG is
defined as we don't need/use these interrupts for operation.
o In gem_start_locked() sync the DMA maps of the descriptor rings before
every kick of the transmitter and not just once after enqueuing all
packets as the NIC might instantly start transmitting after we kicked
it the first time.
o Keep state of the link state and use it to enable or disable the MAC
in gem_mii_statchg() accordingly as well as to return early from
gem_start_locked() in case the link is down. [3]
o Initialize the maximum frame size to a sane value.
o In gem_mii_statchg() enable carrier extension if appropriate.
o Increment if_ierrors in case of an GEM_MAC_RX_OVERFLOW error and in
gem_eint(). [3]
o Handle IFF_ALLMULTI correctly; don't set it if we've turned promiscuous
group mode on and don't clear the flag if we've disabled promiscuous
group mode (these were mostly NOPs though). [2]
o Let gem_eint() also report GEM_INTR_PERR errors.
o Move setting sc_variant from gem_pci_probe() to gem_pci_attach() as
device probe methods are not supposed to touch the softc.
o Collapse sc_inited and sc_pci into bits for sc_flags.
o Add CTASSERTs ensuring that GEM_NRXDESC and GEM_NTXDESC are set to
legal values.
o Correctly set up for 802.3x flow control, though #ifdef out the code
that actually enables it as this needs more testing and mainly a proper
framework to support it.
o Correct and add some conversions from hard-coded functions names to
__func__ which were borked or forgotten in if_gem.c rev. 1.42.
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o In gem_pci_attach() in case attaching fails release the resources in
the opposite order they were allocated.
o Make gem_reset() static to if_gem.c as it's not needed outside that
module.
o Remove the GEM_GIGABIT flag and the associated code; GEM_GIGABIT was
never set and the associated code was in the wrong place.
o Remove sc_mif_config; it was only used to cache the contents of the
respective register within gem_attach().
o Remove the #ifdef'ed out NetBSD/OpenBSD code for establishing a suspend
hook as it will never be used on FreeBSD.
o Also probe Apple Intrepid 2 GMAC and Apple Shasta GMAC, add support for
Apple K2 GMAC. Based on OpenBSD.
o Add support for Sun GBE/P cards, or in other words actually add support
for cards based on GEM to gem(4). This mainly consists of adding support
for the TBI of these chips. Along with this the PHY selection code was
rewritten to hardcode the PHY number for certain configurations as for
example the PHY of the on-board ERI of Blade 1000 shows up twice causing
no link as the second incarnation is isolated.
These changes were ported from OpenBSD with some additional improvements
and modulo some bugs.
o Add code to if_gem_pci.c allowing to read the MAC-address from the VPD on
systems without Open Firmware.
This is an improved version of my variant of the respective code in
if_hme_pci.c
o Now that gem(4) is MI enable it for all archs.
Pointed out by: yongari [1]
Suggested by: rwatson [2], yongari [3]
Tested on: i386 (GEM), powerpc (GMACs by marcel and yongari),
sparc64 (ERI and GEM)
Reviewed by: yongari
Approved by: re (kensmith)
- Group hash functions together and sort
- Add CRYPTO_CAMELLIA_CBC (1)
PR: 116471
Submitted by: Philip Schulz <phs@deadc0.de> (1)
Approved by: re (blanket)
other changes too).
(without any real order)
1. Use device_get_nameunit for mutex naming
2. Add timer for low-latency playback
3. Move most mixer controls from sysctls to mixer(8) controls.
This is a largest part of this patch.
4. Add analog/digital switch (as a temporary sysctl)
5. Get back support for low-bitrate playback (with help of (2))
6. Change locking for exclusive I/O. Writing to non-PTR register
is almost safe and does not need to be ordered with PTR operations.
7. Disable MIDI until we get it to detach properly and fix memory
managment problems.
8. Enable multichannel playback by default. It is as stable as
single-channel mode. Multichannel recording is still an
experimental feature.
9. Multichannel options can be changed by loader tunables.
10. Add a way to disable card from a loader tunable.
11. Add new PCI IDs.
12. Debugger settings are loader tunables now.
14. Remove some unused variables.
15. Mark pcm sub-devices MPSAFE.
16. Partially revert (bus_setup_intr -> snd_setup_intr) since it need
to be done independently
Submitted by: Yuriy Tsibizov (driver maintainer)
Approved by: re (bmah)
Bill Paul copyright. Not sure what the right copyright is, but this
file has been through 22 reversions on OpenBSD and 1 on NetBSD. This
isn't (yet) connected to the build, just in case I've done something
wrong (test builds worked, but better safe than sorry).
Submitted by: Weongyo Jeong
Approved by: re@
I did this in the previous commit, leaves out the parsing of $FreeBSD$
which is actually required to be parsed.
Kindly reminded by: bmah
Approved by: re (bmah)
Approved by: imp (mentor, implicit)
Timezone data changes in the following locations:
- Egypt
- Australia (new DST rules for 2008 and following)
- Perry County, Indiana
- America/Indiana/Tell_City
- Pike County, Indiana
Also:
- City coordinates corrected.
- Layout of leapseconds is updated
PR: conf/115706
Approved by: re (bmah@)
cr0-4, etc. Support should be added for other platforms that have a
different set of registers for system use.
Loosely based on: OpenBSD
Approved by: re
Also rename the related functions in a similar way.
There are no functional changes.
For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.
With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.
The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.
Discussed at: BSDCan 2007
Best new name suggested by: rwatson
Reviewed by: rwatson
Approved by: re (bmah)
Merge in parts of the old fast_ipsec.4 man page to ipsec.4 and
start updating ipsec.4 man page.
Reviewed by: brueffer, sam (slightly earlier versions), bmah
Approved by: re (bmah)
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.
Approved by: re (rwatson), glebius (mentor)
ports to the lagg interface.
- Use the MTU from the first interface as the lagg MTU, all extra interfaces
must be the same.
This fixes using a lagg interface for a vlan or enabling jumbo frames, etc.
Approved by: re (kensmith)
MFC After: 3 days
information from the submitter:
Starting value for OID_AUTO was changed from 100 to 256 (0x100) in
kern/kern_sysctl.c#rev1.112 on 2001-07-25, and defined as
CTL_AUTO_START in sys/sysctl.h#rev1.98.
Submitted by: cnst
Silence from: #bsddocs on efnet
MFC After: 3 days
Approved by: re (bmah)
included man pages on how to use it. This code is still somewhat experimental
but has been successfully tested on a number of targets. Many thanks to
Danny for contributing this.
Approved by: re
config info. from device.hints. Some machines have ipmi controllers
that do not have attachment info in either PCI, SMBIOS or ACPI.
This idea was hacked together by me and then done properly by
jhb.
Submitted by: jhb
Reviewed by: jhb (man page)
Approved by: re (Ken Smith)
MFC after: 1 week
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
It is a latin9/ISO_8859-15 and features dead keys for ^/uml/`, Euro, oe/OE
support and a few additional characters like copyright/trademark.
It is probably Powerbook/iBook compatible but I don't have a machine to test
it with and the primary objective was to have a correct keyboard for within
Parallels (for IntelMacs).
Approved by: re (hrs)
"There seems to be some continuing discussion about how this is best fixed,
and we'd like to get Alexander (as our gcc guru) to opine on a final
solution before picking one. In the mean time, could you back out the
original commit (sys.mk:1.89)?"
Approved by: re (rwatson)
possibly installed thirdparte zoneinfo databases (from ports for example).
PR: bin/104713
Submitted by: Mark Andrews <Mark_Andrews at isc dot org> (original patch
rewritten by me to be more consistent with the new practise).
Approved by: re (kensmith)
Approved by: imp (mentor)
Reviewed by: ru (some time ago already)
