account at creation, create accounts with a "*" password (so you can
use alternate authentication schemes without fearing a "default" password
biting you later), and blank passwords.
Yes, adduser could create a blank password account, but this makes it
slightly more difficult to shoot yourself in the foot.
The /etc/adduser.conf entries are:
# use password-based authentication for new users
# defaultusepassword = "yes" | "no"
defaultusepassword = "yes"
# enable account password at creation
# (the password will be prepended with a star if the account isn't enabled)
# defaultenableaccount = "yes" | "no"
defaultenableaccount = "yes"
# allow blank passwords
# defaultemptypassword = "yes" | "no"
defaultemptypassword = "no"
Requested by: alfred
Reviewed by: alfred
valid keyword handling and the holiday file processing
- don't issue a warning in case the holiday file is not found
- enable inclusion of ../Makefile.inc to reenable compiling-in monitor
support into isdnd
- update manual page, add a comma and correct authors mail address
This driver supports PCI Xr-based and ISA Xem Digiboard cards.
dgm will go away soon if there are no problems reported. For now,
configuring dgm into your kernel warns that you should be using
digi. This driver is probably close to supporting Xi, Xe and Xeve
cards, but I wouldn't expect them to work properly (hardware
donations welcome).
The digi_* pseudo-drivers are not drivers themselves but contain
the BIOS and FEP/OS binaries for various digiboard cards and are
auto-loaded and auto-unloaded by the digi driver at initialisation
time. They *may* be configured into the kernel, but waste a lot
of space if they are. They're intended to be left as modules.
The digictl program is (mainly) used to re-initialise cards that
have external port modules attached such as the PC/Xem.
after the port build/install. The former cleans up "dirty" port work
directories that happen to be lying around, and the latter cleans up
after we're done so that they won't trip up someone else.
PR: ports/25106
Submitted by: tim@bishnet.net, nik, mwm@mired.org
extensive pass through the rpcbind code soon, but I might as well
bring these in now.
- (NetBSD util.c r1.5) Move the initialisation of `tbuf' to avoid
a case where it could end up containing junk from the stack. This
should address the issue in PR bin/26806.
- (NetBSD util.c r1.6) Don't `merge' AF_LOCAL addresses, fix a few
memory leaks.
PR: bin/26806
Submitted by: Martin Blapp <mb@imp.ch>
Obtained from: NetBSD
/usr/X11R6/bin should be there. This helps all the ports that need to
run `mkfontdir' and error out as many port maintainers do not realize
`mkfontdir' isn't in the path.
Prompted by: pkg_add pcemu
make the code not automatically dead but actually use the debug level
in order to determine if output is needed. Fix non-existant from_addr()
by #define'ing it to inet_ntoa().
Remove hardcoded -g from Makefile.
Reported by: "John W. De Boskey" <jwd@bsdwins.com>
Tested by: "John W. De Boskey" <jwd@bsdwins.com>
We now unwrap IP/IP and apply filter rules to both the outer
layer (with ``set filter blah x.x.x.x y.y.y.y ipip'') and to
the payload (reinterpreted by the filter rules).
``set log tcp/ip'' will now show both the outer wrapper and
the (reinterpreted) payload contents.
always look up -network and -mask addresses numerically before
trying getnetbyname(). Without this, we may end up attempting DNS
queries on silly names such as "127.0.0.0.my-domain.com". See the
commit log from revisions 1.21 and 1.20 for further details.
removes the last path component until the mount() succeeds. However,
the code never checks if it has passed the mountpoint, so in some
cases where the mount() never succeeds, it can end up applying the
flags from a mounted filesystem to the underlying one.
Add a sanity check to the code which removes the last path component:
test that the fsid associated with the new path is the same as that
of the old one.
PR: bin/7872
a number of assumptions related to the parsing of options in
/etc/exports, and missed a few necessary new error checks.
The main problems related to netmasks: an IPv6 network address
missing a netmask would result in the filesystem being exported to
the whole IPv6 world, non-continuous netmasks would be made continuous
without any warnings, and nothing prevented you specifying an IPv4
mask with an IPv6 address.
This change addresses these issues. As a side-effect we now store
netmasks in sockaddr structs (this matches the kernel interface,
and is closer to the way it used to be). Add a flag OP_HAVEMASK to
keep track of whether or not we have successfully got a mask from
any source. Replace some mask-related helper functions with versions
that use the sockaddr-based masks.
Also tidy up get_net() and fix the code that interprets IPv4 partial
networks such as "127.1" as network rather than host addresses.
Properly zero out some structures that were ending up partially
containing junk from the stack, fix a few formatting issues, and
add a comment noting some assumptions about export arguments.
would call malloc, stdio and other library functions from the signal
handler which is not safe due to reentrancy problems.
Instead, add a simple handler that just sets a flag, and call the
more complex function from main() when necessary. Unfortunately to
be able to check this flag, we must expand the svc_run() call, but
the RPC library makes that relatively easy to do.
- Remove some horrible code that faked a "struct addrinfo" to be
later passed to freeaddrinfo(). Instead, add a new group type
"GT_DEFAULT" used to denote that the filesystem is exported to the
world, and treat this case separately.
- Don't clear the AI_CANONNAME flag in a struct addrinfo returned
by getaddrinfo. There's still a bit more struct addrinfo abuse
left in here.
- Simplify do_mount() slightly by using an addrinfo pointer to keep
track of the current address.
- Revert del_mlist() to its pre-tirpc prototype. Unlike NetBSD's version,
ours lets the caller generate any syslog() messages, so that it
can include the service name in the message.
- Initialise a few local variables to clarify the logic and avoid some
compiler warnings.
- Remove a few unused functions and local variables, and fix some
whitespace issues.
- Reinstate the logic for avoiding duplicate host entries that got
removed accidentally in revision 1.41 (added in r1.5). This bit
was submitted in a slightly different form by Thomas Quinot.
Submitted by: Martin Blapp <mb@imp.ch>,
Thomas Quinot <quinot@inf.enst.fr>
PR: bin/26148
group file. Because of the way the group sorting works while printing
out the new file it's not possible at this time to restore comments
in other locations, but at least they won't just disappear altogether.
one user who differs only by case. The other perl tools assume (or enforce)
the all lowercase requirement, therefore making the search through
master.passwd case insensitive seemed a reasonable optimization, IMO.
I understand, although I do not sympathize with, the argument that someone
might want to do this on purpose, and might subsequently want to use the
wrong tool for the job. So, this fix should hopefully satisfy both camps.
the following fixes had been made:
- check the size of the font being loaded and compare it with possible sizes
to minimise possibility of loading something that is not a fontfile at all
and turning console screen into garbage;
- prevent buffer overflow (and coredump as a result ) when loading valid
uuencoded file with size that exceeds allocated buffer;
- correct and improve several error messages.
Approved by: -audit, -hackers (silently)
being present in the environment if the user has CDROM defined, or
has specified a device on the command line.
This avoids users of ports like 'workman' that use these variables
getting gratuitous warnings from cdcontrol.
Suggested by: John Sellens <jsellens@generalconcepts.com>
Paxson et al, Status: Informational, May 1998), we should use "bits per
second" and "k" as 1000 not 1024 for throughput measures.
Submitted by: Eduardo Souza Machado da Silva <esms@acm.org>
that actually conforms to the Porters Handbook.
Add a -t option to pkg_version(1) for doing comparison testing.
Add a script (and make test target) to do some regression tests on
the package number comparison routine, to help debug future revisions.
Submitted by: knu
Procrastination by: bmah
Mschapv2 response generation may produce embedded NULs... causing
us to send a bogus response to the radius server and end up
failing the client's valid response.
Problem pointed out by: Eugene Vigovskiy <vigov@com2com.ru>
The usr.sbin/acpi/ utilities should be compiled non-static.
It just followed the usr.sbin/pccard/Makefile.inc way last time.
Pointed out by: ru and msmith
Committed at: BSD HANAMI in Japan 2001
Make sure we pass $(BUILDOPTS) to the `clean' target
so that `make clean' works on the same set of object
files. Otherwise, we may end up with an incorrectly
built and up-to-date object file.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Reflect this in mergemaster, this might later on be decided to be set to
NO_MAKEDEV_INSTALL, for now I kept to the old behaviour.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Reflect this in the documentation.
