. Disconnect imprecise.c from the build. This file can be deleted.
. Add b_tgammal.c to the build for ld80 and ld128 targets. The ld128
is a 'git mv' of imprecise.c to ld128/b_tgammal.c.
* lib/msun/ld80/b_expl.c:
. New file. Implement __exp__D for ld80 targets. This is based on
bsdsrc/b_exp.c.
* lib/msun/ld80/b_logl.c:
. New file. Implement __log__D for ld80 targets. This is based on
bsdsrc/b_log.c.
* lib/msun/ld80/b_tgammal.c b/lib/msun/ld80/b_tgammal.c
. New file. Implement tgammal(x) for ld80 targets.
Submitted by: Steve Kargl
Differential Revision: https://reviews.freebsd.org/D33444
Reviewed by: pfg
The change implements cexpl() for both ld80 and ld128 architectures.
Testing was done on x86_64 and aarch64 systems.
Along the way sincos[fl]() use an optimization that reduces the argument
to being done one rather than twice. This optimization actually pointed
to a bug in the ld128 version of sincosl(), which is now fixed. In
addition, the minmax polynomial coefficients for sincosl() have been
updated.
A concise log of the file-by-file changes follows.
* include/complex.h:
. Add a prototype for cexpl().
* lib/msun/Makefile:
. Add s_cexpl.c to the build.
. Setup a link for cexpl.3 to cexp.3.
* lib/msun/Symbol.map:
. Expose cexpl symbol in libm shared library.
* lib/msun/ld128/s_cexpl.c:
* Implementation of cexpl() for 128-bit long double architectures.
Tested on an aarch64 system.
* lib/msun/ld80/s_cexpl.c:
* Implementation of cexpl() for Intel 80-bit long double.
* lib/msun/man/cexp.3:
. Document cexpl().
* lib/msun/man/complex.3:
. Add a BUGS section about cpow[fl].
* lib/msun/src/s_cexp.c:
. Include float.h for weak references on 53-bit long double targets.
. Use sincos() to reduce argument reduction cost.
* lib/msun/src/s_cexpf.c:
. Use sincosf() to reduce argument reduction cost.
* lib/msun/src/k_sincosl.h:
. Catch up with the new minmax polynomial coefficients for the kernel for
the 128-bit cosl() implementation.
. BUG FIX: *cs was used where *sn should have been. This means that sinl()
was no computed correctly when iy != 0.
* lib/msun/src/s_cosl.c:
. Include fpmath.h to get access to IEEEl2bits.
. Replace M_PI_4 with pio4, a 64-bit or 113-bit approximation for pi / 4.
PR: 216862
MFC after: 1 week
Both IEEE-754 2008 and ISO/IEC TS 18661-4 define the half-cycle
trignometric functions cospi, sinpi, and tanpi. The attached
patch implements cospi[fl], sinpi[fl], and tanpi[fl]. Limited
testing on the cospi and sinpi reveal a max ULP less than 0.89;
while tanpi is more problematic with a max ULP less than 2.01
in the interval [0,0.5]. The algorithms used in these functions
are documented in {ks}_cospi.c, {ks}_sinpi.c, and s_tanpi.c.
Note. I no longer have access to a system with ld128 and
adequate support to compile and test the ld128 implementations
of these functions. Given the almost complete lack of input from
others on improvements to libm, I doubt that anyone cares. If
someone does care, the ld128 files contain a number of FIXME comments,
and in particular, while the polynomial coefficients are given
I did not update the polynomial algorithms to properly use the
coefficients.
PR: 218514
MFC after: 2 weeks
Apparently GCC only supports arithmetic expressions that use static
const variables in initializers starting with GCC8. To keep older
versions happy use a macro instead.
Fixes: 221622ec0c ("lib/msun: Avoid FE_INEXACT for x86 log2l/log10l")
Reported by: Jenkins
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D29233
This fixes tests/lib/msun/logarithm_test after compiling the test with
-fno-builtin (D28577). Adding invln10_lo + invln10_10 results in
FE_INEXACT (for all inputs) and the same for the log2l invln2_lo + invln2_hi.
This patch avoids FE_INEXACT (for exact results such as 0) by defining a
constant and using that.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28786
- Micro-optimization: use sincosl(x) instead of a call to cosl(x) and
a call to sinl(x). Argument reduction is done once not twice.
- Use a long double constant instead of an invalid double constant.
- Spell scale2 correctly
He could not test ld128, so that patch is untested.
Submitted by: sgk at troutmask.apl.washington.edu (Steve Kargl)
This is a follow-up to r336299.
* lib/msun/Makefile:
. Remove polevll.c
* lib/msun/ld80/e_powl.c:
. Copy contents of polevll.c to here. This is the only consumer of
these functions. Make functions 'static inline'.
. Make reducl a 'static inline' function.
* lib/msun/man/exp.3:
. Remove BUGS section that no longer applies.
* lib/msun/src/math_private.h:
. Remove prototypes of __p1evll() and __polevll()
* lib/msun/src/s_cpow.c:
* lib/msun/src/s_cpowf.c:
* lib/msun/src/s_cpowl.c
. Include math_private.h.
. Use the CMPLX macro from either C99 or math_private.h (depends on
compiler support) instead of the problematic use of complex I.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
PR: 229876
MFC after: 1 week
This was open-coded in range reduction for trig and exp functions. Now
there are 3 static inline functions rnint[fl]() that replace open-coded
expressions, and type-generic irint() and i64rint() macros that hide the
complications for efficiently using non-generic irint() and irintl()
functions and casts.
Special details:
ld128/e_rem_pio2l.h needs to use i64rint() since it needs a 46-bit integer
result. Everything else only needs a (less than) 32-bit integer result so
uses irint().
Float and double cases now use float_t and double_t locally instead of
STRICT_ASSIGN() to avoid bugs in extra precision.
On amd64, inline asm is now only used for irint() on long doubles. The SSE
asm for irint() on amd64 only existed because the ifdef tangles made the
correct method of simply casting to int for this case non-obvious.
cc1: warnings being treated as errors
/usr/src/lib/msun/src/s_cpow.c: In function 'cpow':
/usr/src/lib/msun/src/s_cpow.c:63: warning: implicit declaration of function 'CMPLX'
This is a follow-up to r336299.
* lib/msun/Makefile:
. Remove polevll.c
* lib/msun/ld80/e_powl.c:
. Copy contents of polevll.c to here. This is the only consumer of
these functions. Make functions 'static inline'.
. Make reducl a 'static inline' function.
* lib/msun/man/exp.3:
. Remove BUGS section that no longer applies.
* lib/msun/src/math_private.h:
. Remove prototypes of __p1evll() and __polevll()
* lib/msun/src/s_cpow.c:
* lib/msun/src/s_cpowf.c:
* lib/msun/src/s_cpowl.c
. Use the CMPLX macro from either C99 or math_private.h (depends of
compiler support) instead of the problematic use of complex I.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
PR: 229876
MFC after: 1 week
independent of the precision in most cases. This is mainly to simplify
checking for errors. r176266 did this for e_pow[f].c using a less
refined expression that often didn't work. r176276 fixes an error in
the log message for r176266. The main refinement is to always expand
to long double precision. See old log messages (especially these 2)
and the comment on the macro for more general details.
Specific details:
- using nan_mix() consistently for the new and old pow*() functions was
the only thing needed to make my consistency test for powl() vs pow()
pass on amd64.
- catrig[fl].c already had all the refinements, but open-coded.
- e_atan2[fl].c, e_fmod[fl].c and s_remquo[fl] only had primitive NaN
mixing.
- e_hypot[fl].c already had a different refined version of r176266. Refine
this further. nan_mix() is not directly usable here since we want to
clear the sign bit.
- e_remainder[f].c already had an earlier version of r176266.
- s_ccosh[f].c,/s_csinh[f].c already had a version equivalent to r176266.
Refine this further. nan_mix() is not directly usable here since the
expression has to handle some non-NaN cases.
- s_csqrt.[fl]: the mixing was special and mostly wrong. Partially fix the
special version.
- s_ctanh[f].c already had a version of r176266.
This corresponds to the latest status (hasn't changed in 9+
years) from openbsd of ld80/ld128 powl, and source cpowf, cpow,
cpowl (the complex power functions for float complex, double
complex, and long double complex) which are required for C99
compliance and were missing from FreeBSD. Also required for
some numerical codes using complex numbered Hamiltonians.
Thanks to jhb for tracking down the issue with making
weak_reference compile on powerpc.
When asked to review, bde said "I don't like it" - but
provided no actionable feedback or superior implementations.
Discussed with: jhb
Submitted by: jmd
Differential Revision: https://reviews.freebsd.org/D15919
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This cleans up a warning when building libm at higher WARNS levels and
makes the intent more clear. By the C standard the values are assigned
to subobject members in order so this change introduces no functional
change. (6.7.9 20)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8333
The C11 standard introduced a set of macros (CMPLX, CMPLXF, CMPLXL) that
can be used to construct complex numbers from a pair of real and
imaginary numbers. Unfortunately, they require some compiler support,
which is why we only define them for Clang and GCC>=4.7.
The cpack() function in libm performs the same task as CMPLX(), but
cannot be used to generate compile-time constants. This means that all
invocations of cpack() can safely be replaced by C11's CMPLX(). To keep
the code building with GCC 4.2, provide copies of CMPLX() that can at
least be used to generate run-time complex numbers.
This makes it easier to build some of the functions outside of libm.
lgamma(x) = -log(x) - log(1+x) + x*(1-g) + x**2*P(x) with g = 0.57...
being the Euler constant and P(x) a polynomial. Substitution of small
into the RHS shows that the last 3 terms are negligible in comparison to
the leading term. The choice of 3 may be conservative.
The value large=2**(p+3) is detemined from Stirling's approximation
lgamma(x) = x*(log(x)-1) - log(x)/2 + log(2*pi)/2 + P(1/x)/x
Again, substitution of large into the RHS reveals the last 3 terms
are negligible in comparison to the leading term.
Move the x=+-0 special case into the |x|<small block.
In the ld80 and ld128 implementaion, use fdlibm compatible comparisons
involving ix, lx, and llx. This replaces several floating point
comparisons (some involving fabsl()) and also fixes the special cases
x=1 and x=2.
While here
. Remove unnecessary parentheses.
. Fix/improve comments due to the above changes.
. Fix nearby whitespace.
* src/e_lgamma_r.c:
. Sort declaration.
. Remove unneeded explicit cast for type conversion.
. Replace a double literal constant by an integer literal constant.
* src/e_lgammaf_r.c:
. Sort declaration.
* ld128/e_lgammal_r.c:
. Replace a long double literal constant by a double literal constant.
* ld80/e_lgammal_r.c:
. Remove unused '#include float.h'
. Replace a long double literal constant by a double literal constant.
Requested by: bde
. Hook e_lgammal[_r].c to the build.
. Create man page links for lgammal[-r].3.
* Symbol.map:
. Sort lgammal to its rightful place.
. Add FBSD_1.4 section for the new lgamal_r symbol.
* ld128/e_lgammal_r.c:
. 128-bit implementataion of lgammal_r().
* ld80/e_lgammal_r.c:
. Intel 80-bit format implementation of lgammal_r().
* src/e_lgamma.c:
. Expose lgammal as a weak reference to lgamma for platforms
where long double is mapped to double.
* src/e_lgamma_r.c:
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
. Expose lgammal_r as a weak reference to lgamma_r for platforms
where long double is mapped to double.
* src/e_lgammaf_r.c:
. Fixed the Cygnus Support conversion of e_lgamma_r.c to float.
This includes the generation of new polynomial and rational
approximations with fewer terms. For each approximation, include
a comment on an estimate of the accuracy over the relevant domain.
. Use integer literal constants instead of real literal constants.
Let compiler(s) do the job of conversion to the appropriate type.
This allows the removal of several explicit casts of double values
to float.
* src/e_lgammal.c:
. Wrapper for lgammal() about lgammal_r().
* src/imprecise.c:
. Remove the lgamma.
* src/math.h:
. Add a prototype for lgammal_r().
* man/lgamma.3:
. Document the new functions.
Reviewed by: bde
. Add s_erfl.c to building libm.
. Add MLINKS for erfl.3 and erfcl.3.
* Symbol.map:
. Move erfl and erfcl to their proper location.
* ld128/s_erfl.c:
. Implementations of erfl and erfcl in the IEEE 754 128-bit format.
* ld80/s_erfl.c:
. Implementations of erfl and erfcl in the Intel 80-bit format.
* man/erf.3:
. Document the new functions.
. While here, remove an incomplete sentence.
* src/imprecise.c:
. Remove the stupidity of mapping erfl and erfcl to erf and erfc.
* src/math.h:
. Move the declarations of erfl and erfcl to their proper place.
* src/s_erf.c:
. For architectures where double and long double are the same
floating point format, use weak references to map erfl to
erf and ercl to erfc.
Reviewed by: bde (many earlier versions)
* ld128/k_expl.h:
. Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
x must be finite and not tiny or huge. The kernel returns hi and lo
values for extra precision and an exponent k for a 2**k scale factor.
. Define additional kernels k_hexpl() and hexpl() that include a 1/2
scaling and are used by the hyperbolic functions.
* ld80/s_expl.c:
* ld128/s_expl.c:
. Use the __k_expl() kernel.
Obtained from: bde
as a fairly faithful implementation of the algorithm found in
PTP Tang, "Table-driven implementation of the Expm1 function
in IEEE floating-point arithmetic," ACM Trans. Math. Soft., 18,
211-222 (1992).
Over the last 18-24 months, the code has under gone significant
optimization and testing.
Reviewed by: bde
Obtained from: bde (most of the optimizations)
* Use integral numerical constants, and let the compiler do the
conversion to long double.
ld128/s_expl.c:
* Use integral numerical constants, and let the compiler do the
conversion to long double.
* Use the ENTERI/RETURNI macros, which are no-ops on ld128. This
however makes the ld80 and ld128 identical.
Reviewed by: bde (as part of larger diff)
* In the special case x = -Inf or -NaN, use a micro-optimization
to eliminate the need to access u.xbits.man.
* Fix an off-by-one for small arguments |x| < 0x1p-65.
ld128/s_expl.c:
* In the special case x = -Inf or -NaN, use a micro-optimization
to eliminate the need to access u.xbits.manh and u.xbits.manl.
* Fix an off-by-one for small arguments |x| < 0x1p-114.
Obtained from: bde
* Update the evaluation of the polynomial. This allows the removal
of the now unused variables t23 and t45.
ld128/s_expl.c:
* Update the evaluation of the polynomial and the intermediate
result t. This update allows several numerical constants to be
written as double rather than long double constants. Update
the constants as appropriate.
Obtained from: bde
and use macros to access the e component of the unions. This allows
the portions of the code in ld80 to be identical to the ld128 code.
Obtained from: bde
The names now coincide with the name used in PTP Tang's paper.
* Rename the variable from s to tbl to better reflect that
this is a table, and to be consistent with the naming scheme
in s_exp2l.c
Reviewed by: bde (as part of larger diff)
* Update Copyright years to include 2013.
ld128/s_expl.c:
* Correct and update Copyright years. This code originated from
the ld80 version, so it should reflect the same time period.
Reviewed by: bde (as part of larger diff)
* Use ENTERI/RETURNI to allow the use of FP_PE on i386 target.
Reviewed by: das (and bde a long time ago)
Approved by: das (mentor)
Obtained from: bde (polynomial coefficients)
are workarounds for various symptoms of the problem described in clang
bugs 3929, 8100, 8241, 10409, and 12958.
The regression tests did their job: they failed, someone brought it
up on the mailing lists, and then the issue got ignored for 6 months.
Oops. There may still be some regressions for functions we don't have
test coverage for yet.
table and the requirement on trailing zero bits.
* Remove the __aligned() compiler directives as these were found
to have a negative effect on the produced code.
Submitted by: bde
Approved by: das (mentor)
. Change the API for the LD80C by removing the explicit passing
of the sign bit. The sign can be determined from the last
parameter of the macro.
. On i386, load long double by bit manipulations to work around
at least a gcc compiler issue. On non-i386 ld80 architectures,
use a simple assignment.
* ld80/s_expl.c:
. Update the only consumer of LD80C.
Submitted by: bde
Approved by: das (mentor)
. Fix the threshold for expl(x) where |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
* ld128/s_expl.c:
. Re-order logic in exceptional cases to match the logic used in
other long double functions.
. Fix the threshold for expl(x) where is |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
Submitted by: bde
Approved by: das (mentor)
. Guard a comment from reformatting by indent(1).
. Re-order variables in declarations to alphabetical order.
. Remove a banal comment.
* ld128/s_expl.c:
. Add a comment to point to ld80/s_expl.c for implementation details.
. Move the #define of INTERVAL to reduce the diff with ld80/s_expl.c.
. twom10000 does not need to be volatile, so move its declaration.
. Re-order variables in declarations to alphabetical order.
. Add a comment that describes the argument reduction.
. Remove the same banal comment found in ld80/s_expl.c.
Reviewed by: bde
Approved by: das (mentor)
Also, update the comment to describe the choice of using
a high and low decomposition of 2^(i/INTERNVAL) for
0 <= i <= INTERVAL in preparation for an implementation of
expm1l.
* Move the #define of INTERVAL above the comment, because the
comment refers to INTERVAL.
Reviewed by: bde
Approved by: das (mentor)
compatibility with the INTERVALS macro used in the soon-to-be-commmitted
expm1l() and someday-to-be-committed log*l() functions.
Add a comment into ld128/s_expl.c noting at gcc issue that was
deleted when rewriting ld80/e_expl.c as ld128/s_expl.c.
Requested by: bde
Approved by: das (mentor)
. Remove a few #ifdefs that should have been removed in the initial
commit.
. Sort fpmath.h to its rightful place.
* ld128/s_expl.c:
. Replace EXPMASK with its actual value.
. Sort fpmath.h to its rightful place.
Requested by: bde
Approved by: das (mentor)
format. These implementations are based on
PTP Tang, "Table-driven implementation of the exponential function
in IEEE floating-point arithmetic," ACM Trans. Math. Soft., 15,
144-157 (1989).
PR: standards/152415
Submitted by: kargl
Reviewed by: bde, das
Approved by: das (mentor)
