1. Fix the bogon I introduced that made some root filesystems fail to be
made with `unable to make filesystem on sd1s1a' or some such error
message.
2. Latest installment in the never-ending chapter on making FTP do the right
thing on a cruel internet.
3. Make `express install' a truly express install and split off what it used
to do into a `novice install' that's even more geared to the novice
by asking questions in order, rather than forcing them through the menu
interface.
4. Make anonymous FTP setup truly DTRT.
5. Build lndir directly into sysinstall and make the novice install offer
to set up the ports tree. Also make the ports setup truly explanatory
about what it's doing, and always link the ports destination to /usr/ports
if necessary so that bsd.port.mk doesn't need to be tweaked.
This causes:
1: inetd to clear it's getlogin() name at startup (in case the sysadmin
logged in and su'ed to root and restarted inetd)
2: inetd to start each spawned process in it's own session.
3: inetd to call setlogin() on non-root processes (eg: uucp for uucico)
4: log failures more extensively
This means that root spawned processes from inetd remain responsible for
setting their login name if they change their uid. (eg: rshd, login, etc).
If they do not do so, it is safer for them to have no "login name" than a
wrong one (like "root") because the getlogin() system call is documented
as "secure" on 4.4BSD. inetd when started from /etc/rc would have no login
name anyway, so this isn't really a change - it's making it consistant with
the bootup state...
The setsid() change *may* cause something to break that is doing a setsid()
itself and checking the result - it will fail now because it's already been
done. The consensis seems to be that this is unlikely. David G. thinks
this is acceptable as it is cleaner from an architectural point of view.
patches to merge the two IPX packages to work with each other and to
not break make-world :)
IPXrouted should be working now, (or at least compiling) :)
Submitted by: john Hay (John.Hay@csir.co.za)
John's IPXrouted..
this has not yet been seen to run correctly with Mike's IPX/SPX
code (he has his own)
bringing them both in is the first step in merging the two packages
for 2.2
o Lots of documentation fixes.
o Rename FTP active to "FTP" and explain passive mode better.
o Make tcpip screen a bit more friendly.
o Literally dozens of nits.
There are some important bugfixes here, but nothing earth-shattering.
In particular, the Lame Delegation detection is massively sped up, meaning
that a lame server can be given up on in a few seconds, rather than taking
75 seconds. This will be a big win for large mailing list machines,
eg: freefall.
Note: this is a remote cvs import... Backups have been made.. :-)
Obtained from: Paul Vixie <paul@vix.com>
2. Fix an infinite recursion bug in FTP retry. Tricky, this FTP install!
3. Add messaging routines for scripts.
4. Fix yet more bogons. I think I'm fixing them faster than they're growing,
but it's hard to say. I'm really glad we're throwing this code away for
2.2!
don't bogusly restore the screen to the message that was the cause of the
abort. That resulted in lots of weird flickering dialog boxes that appeared
to be displayed out of sequence.
that the FTP install doesn't deal with timeouts and hasn't since it was
written. Fixed.
2. Totally eliminate the OptionFlags. I only had to work harder to
sync them with configuration variables, so why not simply always use
configuration variables? This has actually greatly simplified areas
of the code.
o Implement the 2.0.5->2.1 upgrade procedure (gah).
o Bring in Coranth's support for configuration of anon ftp and Samba
plus some changes of my own.
o More attempts to actually write the documentation in english.
o Update docs to contain more 2.1-centric information.
I'm really, truly using it). Allow distribution fetch to get .info
files from the root.flp OR the distribution in question, allowing us
to add flexibility to the scheme. At some point, perhaps soon, the
cached copy should probably go away entirely!
Merge today's work.
Now support an attributes file loaded at startup (true front-loaded install).
Add fuller debugging support to all device I/O routines.
Lots-o-bug fixes.
Document `-d' and `-I'. Add a BUGS section noting that
logging from UDP is an unauthenticated remote disk-filling service,
and probably should be disabled by default in the absence of some sort
of authentication.
Remove the ATAPI kernel hack.
Remove the now-unnecessary work-around for booting root off a slice; it
appears to work just fine now and will confuse a lot fewer folks.
A settable redial timer helps to avoid the problem where both ends
of a link want to dial at the same time and the line winds up busy
for both ends. The process id is logged in /var/run/PPP.system where
system is the name of the called system. When both ends of a link
are running in demand dial mode, you need an easy way to get the pid
of the ppp on the called end so it can be killed and re-started with
-direct or pppd started to handle the incoming ppp session.
2. Add secret description for "set timeout" to man.
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: John Capo <jc@irbs.com>
host sends a leave message for a group that the router is a member of
that membership gets forgotten until the next general query.
- the second group-specific query generated looks like a general query
sent to a specific group
Submitted by: Bill Fenner <fenner@parc.xerox.com>
host sends a leave message for a group that the router is a member of
that membership gets forgotten until the next general query.
- the second group-specific query generated looks like a general query
sent to a specific group
methods. This should make the process rather more robust in the face
of entropy.
o Let tape cpio extract guess type of tape format.
o Hide cursor better in options screen.
Don't gratuitously shutdown network after NFS or FTP install.
Centralize release version string to one location included by everyone.
Bring in new options screen.
The filenames in SRCS must have one of the extensions .s, .S, .c, or .cc
if they are to be handled by bsd.dep.mk. Lex and yacc files must be
converted to C files and kept around for everything to work. This is
handled fairly automatically if the names of the generated C files are
put in SRCS. Unfortunately these names must be put in CLEANFILES too.
pcvt Makefiles:
Fix DPADD. It was missing.
Fix CLEANFILES. Some temporary files were missing.
Fix CFLAGS. There were some `-I dir' options.
There must be no whitespace separating -I and -D options from the
corresponding args if these options are to be handled by bsd.dep.mk.
Generate prototypes for SCSI functions and function pointers.
Fix redundant declarations of interrupt handlers.
Generate 4.4-style includes (<> instead of "").
Clean up formatting of both the source and the output a bit.
This looks like it was developed offline, and is being spammed over the
top of the existing. "That's fine by me! I dont really care how you do
it, just get it in there..." said Jordan in a conversation a short while
ago...
dropped - devet@adv.IAEhv.nl (Arjan de Vet)
2. Will not read data from telnet connection - John Capo <jc@irbs.com>
3. Using LQM option could be drop the link due to LcpLayerDown() doesn't
stop LQR timer. - Brian <brian@awfulhak.demon.co.uk>
4. Allow to describe a syntax of filters that is not only port number
but also by name in /etc/service. - Rich Murphey <rich@lamprey.utmb.edu>
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: devet@adv.IAEhv.nl, jc@irbs.com, brian@awfulhak.demon.co.uk,
rich@lamprey.utmb.edu
so that it only unlinks the file if syslogd knows it created it.
If the path specified for the socket already exists then syslogd
will now exit with an "address already in use" error which is more
sensible than blindly unlinking the existing filename. This stops
syslogd -d foo/bar from unlinking foo/bar if it's a real file.
one) as a valid answer to an echo request. This makes the log less
noisy when connecting to Trumpet Winsock or FreeBSD 2.0.5's pppd. :)
Submitted by: melvin@zytek.com (Stephen Melvin)
This is not quite finished yet, and therefore I have not added it to the
usr.sbin/Makefile yet.
I collected a bunch of Andrews small programs into one: pccardc /phk
Reviewed by: phk
Submitted by: Andrew McRae <andrew@mega.com.au>
import of 4.9.3. This man page was produced by sed from the real version
before import, but I didn't have much choice.. This is needed to enable
the ndc target to complete a "make install"
Yes, there will be conflicts on just about every file. There is a
significant mainline after the initial import, and the "-j" merge conflicts
on the $Id$ lines... Yuck! (These comments apply to the rest of the
imports)
Obtained from: Paul Vixie <paul@vix.com>
that this is a superset of cdplay, and perhaps it's time to send cdplay
into the bit bucket if this works well. According to the docs, it has
a friendlier command structure, command line interface etc.
Submitted by: Serge Vakulenko <vak@cronyx.ru>
Note that conf.c, although there was an import conflict, it did not
require intervention, as it was the $Id$ tag. It would have become
rev 1.8 on checkout so there's no point changing it from 1.7 to
1.1.1.3 as the "-j" option wanted to do.. Trust me.. :-)
page. I tried all three modes (rwhod, rwhod -m, rwhod -m 32) on a machine
with 2 ethernet interfaces and they all worked.
Submitted by: Bill Fenner <fenner@parc.xerox.com>
'NIS information unchanged' or '/etc/master.passwd unchanged'
depending on which was is being modified (conditional on -DYP).
This is to save me the trouble of writing a whole other error
routine (nis_error()?) for the upcoming changes to passwd and
chpass.
Note that this is pretty light at the moment.. It's been gutted to remove
references to older features no longer in the driver.
Curses-based port monitoring is intended for the future.. :-)
Obtained from: Andy Rutter, <andy@acronym.co.uk>
- getnetgrent.c: address some NIS compatibility problems. We really need
to use the netgroup.byuser and netgroup.byhost maps to speed up innetgr()
when using NIS. Also, change the NIS interaction in the following way:
If /etc/netgroup does not exist or is empty (or contains only the
NIS '+' token), we now use NIS exclusively. This lets us use the
'reverse netgroup' maps and is more or less the behavior of other
platforms.
If /etc/netgroup exists and contains local netgroup data (but no '+').
we use only lthe local stuff and ignore NIS.
If /etc/netgroup exists and contains both local data and the '+',
we use the local data nd the netgroup map as a single combined
database (which, unfortunately, can be slow when the netgroup
database is large). This is what we have been doing up until now.
Head off a potential NULL pointer dereference in the old innetgr()
matching code.
Also fix the way the NIS netgroup map is incorporated into things:
adding the '+' is supposed to make it seem as though the netgroup
database is 'inserted' wherever the '+' is placed. We didn't quite
do it that way before.
(The NetBSD people apparently use a real, honest-to-gosh, netgroup.db
database that works just like the password database. This is
actually a neat idea since netgroups is the sort of thing that
can really benefit from having multi-key search capability,
particularly since reverse lookups require more than a trivial
amount of processing. Should we do something like this too?)
- netgroup.5: document all this stuff.
- rcmd.c: some sleuthing with some test programs linked with my own
version of innetgr() has revealed that SunOS always passes the NIS
domain name to innetgr() in the 'domain' argument. We might as well
do the same (if YP is defined).
- ether_addr.c: also fix the NIS interaction so that placing the
'+' token in the /etc/ethers file makes it seem like the NIS
ethers data is 'inserted' at that point. (Chances are nobody will
notice the effect of this change, which is just te way I like it. :)
specified in the top level Makefiles.
Previously I missed dozens of Makefiles that skip the install after
using `cmp -s' to decide that the install isn't necessary.
flag. The getopt handling in here is actually pretty bogus (not Phil's
fault - it's original sin) but the general approach is working so I'm not
going to break it. Some small tweaks of my own to add error checking to what
was originally submitted. Strange how nobody noticed that the flag was
documented but completely missing from the code before! [jkh].
Submitted by: Phil Taylor <phil@zipmail.co.uk>
interface set at 57600 baud, and I found out the hard way that lpd doesn't
know about speeds greater than 38400, even though <sys/ttydev.h> also
permits 57600 and 115200 baud. Fix this by adding B57600 and B115200 to the
'bauds' table. (The Apple printer worked properly once I did this, BTW. :)
FTP_PASSIVE_MODE. It would be really nice if we could standardise on
this name so that all tools (like ncftp) that offer passive/active
ftp selection would work seamlessly with one user environment variable
setting.
Running there you got any kind of strange errors from tar caused
by treating directories as tar files!
Fix it by adding new isfile(name) (check for reg. files) to simple fexists(name) calls.
pkg_manage silently dumps core, pkg_info claims about them to
stderr, which makes very difficult to find what directory cause it via
tons of pkg_info -a output. I found solution which covers both variants,
now pkg_info claims about missing files to stdout among valid output
with ERROR: prefix. It heals pkg_manage to not dump core and makes
easy to find errors in pkg_info -a output by simple /ERROR 'more' command.
- use daemon() to daemonify ourselves
- the 'Usage' printf() was missing an argument
- remove declaration of rindex and #include <string.h> instead
bootparam.c:
- get rid of local declarations of YP functions and include headers
from /usr/include/rpcsvc instead.
level ourself. We failed for unreadable directories. E.g.,
`mtree -d -f /etc/mtree/BSD.usr.dist -p /usr' run by `nobody' was
confused after it couldn't descend into /usr/games/hide. It looked
for /usr/include and subsequent directories in /usr/games.
Don't search for `extra' files when the spec depth is less than the
fts level. The spec depth isn't incremented for leaf nodes because
that would give a NULL level pointer and make it inconvenient to go
back to the parent level. Leaf nodes are built for directories that
are empty in the spec. Since they are empty in the spec, all files
in them are extra. The search looked for files one spec level
too high, so for `mtree -d -f /etc/mtree/BSD.usr.dist -p /usr',
obj/sbin matched ./sbin and wasn't considered extra, so it was
descended into and lots of bogus extra things in it were found.
This was harmful for `mtree -U' (as reported in pr623) and worse
for `mtree -r'.
Use rmdir(), not unlink(), to remove `extra' directories. unlink()
succeeds for root but unlinking directories normally damages the
file system.
Report `fts_errno' instead of `errno' when the former applies.
