Commit Graph

70 Commits

Author SHA1 Message Date
Peter Wemm
a5b996a7ec recording cvs-1.6 file death 1995-12-30 19:02:48 +00:00
Bruce Evans
6ea3e9d839 Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.

pci now uses a different interrupt handler type for interrupts that it
dispatches and the isa interrupt handler type for the interrupts that
it handles.
1995-12-16 00:27:59 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Stefan Eßer
2e80ea0536 Make CONF1_ENABLE_MSK1 even less restriktive: Ignore slot ID ... 1995-10-17 23:30:11 +00:00
Stefan Eßer
0e2f699b9e At least the ASUS Triton motherboards don't disable the PCI bus configuration
accesses after the BIOS bus scan. The previous revision made the assumption,
that every PCI motherboard did ...

Change the test on the initial value of the CONF1_ADDR_PORT register in a way
that makes the probe succeed on triton based motherboards, without breaking
the EISA motherboard that has some non-PCI register at the same address.
1995-10-17 15:23:14 +00:00
Stefan Eßer
287911bd50 Go back to separate tests for configuration mechanism 1 and mechanism 2.
Require the state of the configuration enable bits to be OFF assuming
that the BIOS left them that way, as it should anyway to avoid bad things
to happen.

The tests themselves are copied from the previous release, with the
exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be
read back as '0', since only DWORD addresses are legal.
1995-10-15 23:43:08 +00:00
Stefan Eßer
c7483249e7 Fix bad typo: CONF1_ENABLE_RES1 was written CONF1_ENABLE_CHK1 ... 1995-10-09 21:56:24 +00:00
Stefan Eßer
77b573149a New approach to the PCI bus configuration mechanism probe problem:
- try to make sure there is any kind of PCI device
- if there is anything at port 0x0cf8, then check for mech. 1 or 2
1995-09-22 19:10:54 +00:00
Stefan Eßer
a3adc4f8c5 Revert most changes of previous commit.
Changes relative to 1.12:
- Put extra instruction between outl()/inl() sequence to prevent the
  old value being read back because of the bus capacitance.
- Additional check for existence of register at CONF2_ENABLE_PORT.
1995-09-18 21:48:39 +00:00
Stefan Eßer
2d14418625 Another try to determine the PCI bus configuration mode (and whether
there is a PCI bus at all) ...

- Do not expect the chip sets to follow even very clearly expressed
  requirements of the PCI 2.0 spec.
- Do not read back the value just written to an I/O port without making
  sure that some other data have crossed the bus in between ...
1995-09-15 21:43:45 +00:00
Stefan Eßer
d7ea35fc88 Improved verification of configuration space accesses working:
Scan for devices instead of assuming that device 0 is present on bus 0
of every PCI motherboard.
1995-09-14 20:27:31 +00:00
Stefan Eßer
cda6791190 Make the PCI host bridge probe code more robust when dealing with chip sets
that use configuration mode 1, but still violate the PCI 2.0 specs ...
(Required for the Compaq Proliant, for example.)
1995-09-13 17:03:47 +00:00
Stefan Eßer
d2a2d5ec41 The PCI config mechanism 1 test failed for the Intel Aries.
Make it less strict ...

Submitted by:	NIIMI Satoshi <sa2c@and.or.jp>
1995-06-30 16:11:42 +00:00
Stefan Eßer
0847c06d2e PCI configuration mechanism now determined by a method, that doesn't
fail on new hardware (Compaq Prolinea and Compaq Prosignea), and that
doesn't erroneously identify old mech. 2 chip sets as using mech. 1.
(See section 3.6.4.1.1 of the PCI bus specs rev. 2.0)
1995-06-28 15:54:57 +00:00
Stefan Eßer
0f29bf015c Correct pcibus_setup() to return as soon as one test succeeds. 1995-03-22 21:35:39 +00:00
Stefan Eßer
9c6f3c132b Delete PCI PCI bridge simulator code ...
Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-22 19:51:59 +00:00
Stefan Eßer
33865a313c Remove spurious declaration of printf().
Submitted by:	Michael Reifenberger <root@rz-wb.fh-sw.de>
1995-03-22 10:52:05 +00:00
Stefan Eßer
5b3f532eb1 New ISA specific PCI code.
Supports shared PCI interrupts.

Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:06:07 +00:00
Bruce Evans
550f8550ec Replace all remaining instances of i386/include' by machine' and fix
nearby #include inconsistencies.
1995-02-26 05:14:53 +00:00
Stefan Eßer
781d9d4623 Keep PCI_CONF_MODE in a safe place for later reference, if #defined.
Reviewed by:	se
Submitted by:	seb@erix.ericsson.se (Sebastian Strollo)
1995-02-25 17:51:18 +00:00
Stefan Eßer
6f22585dd4 Initialisation of interrupt masks changed.
Reviewed by:	se
Submitted by:	wolf (Wolfgang Stanglmeier)
1995-02-09 20:16:19 +00:00
Stefan Eßer
ac19f91802 Reviewed by: se
Submitted by:	wolf (Wolfgang Stanglmeier)
New ISA dependend file for PCI bus support.
Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
Justin T. Gibbs
d7be8cb6e9 Change the string returned in the aic7870 motherboard probe case. Change
#define to a more appropriate name.
1995-01-22 00:47:50 +00:00
Justin T. Gibbs
344e176820 Add $Id. Recognize motherboard aic7870 based controllers. 1995-01-16 16:31:57 +00:00
Justin T. Gibbs
451ab98ff3 Add in aic7770.c (EISA/VL Adaptors) and aic7870.c (PCI adaptor) dependancies
for the ahc driver.
1995-01-13 02:23:27 +00:00
Stefan Eßer
cde24835d3 Submitted by: Mikael Hybsch <micke@dynas.se>
Add support for NCR 53c815 PCI SCSI chip.
1995-01-12 14:01:13 +00:00
David Greenman
edd5a4af47 Restore my changes in rev 1.11 that Garrett killed in his commit. 1994-12-22 23:42:25 +00:00
Garrett Wollman
dd2e410221 Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
Stefan Eßer
9a3c07de07 Add support for -v option passed to boot loader (bootverbose).
Reviewed by:
Submitted by:
Obtained from:
1994-12-22 21:20:39 +00:00
David Greenman
2b4e0927f6 Unbogify the size being passed to bzero when clearing struct softc. 1994-12-18 14:40:26 +00:00
David Greenman
d33095d2b2 The physical memory allocated for input DMA must be contiguous. The driver
worked in the past only because of good fortune. Anyway, use the contig alloc
routine I wrote awhile ago (vm_page_alloc_contig) for the sound code to do
this allocation. Also, specify read+write on the permissions to pmap_enter().
Specifying just read can have unexpected consquences.
1994-12-11 01:45:41 +00:00
David Greenman
89384ace85 Fix bug I introduced that broke BPF support. Caused by a byte order problem
in an if () expression. Problem fixed by removing the test for ETHERTYPE_*
before passing packet to higher layers.
1994-11-30 12:08:23 +00:00
Stefan Eßer
99e7cabca3 Really deactivated the code that puts scsi stats into dk0.
This should have been disabled for some time, but I had screwed up ...
This made spurious values appear for fd0 in systat, when there was
NCR SCSI activity.
1994-11-28 23:18:46 +00:00
David Greenman
307d80be7a Moved conversion of ether_type to host byte order out of ethernet drivers
and into ether_input(). It was silly to have bpf want this one way and
ether_input want it another way. Ripped out trailer support from the few
remaining drivers that still had it.
1994-11-24 14:29:38 +00:00
David Greenman
b83f4f55d8 Bunch of fixes from Matt Thomas:
1) make #includes correct
2) fix bugs in address check macros
3) fixed bugs in, and enabled, recopy if heavily fragmented code
4) moved call to bpf tap to be before enqueing packet (probably gratuitous)
5) fixed bug that caused "abnormal interrupt" at boot time/first use
6) added support for reading Zynx address ROM
7) fixed bug that caused broadcasts to not work shortly after booting (only
	manifested if not using multicast - e.g. not in FreeBSD 2.0)
8) fixed spelling errors in comments

Submitted by:	Matt Thomas
1994-11-22 09:47:31 +00:00
David Greenman
07d0d0fc9c Added support for SIOCSIFMTU ioctl. Fixed bug that caused panic at boot time
related to interrupts being enabled before the device attach. The interrupt
should be mapped *after* the device attach.
1994-11-13 12:39:38 +00:00
David Greenman
6e876d0d60 Added missing call to bpf on the transmit side. Nuked revision log. 1994-11-10 02:56:48 +00:00
David Greenman
e754e0f30f Fixed bug that somehow made it into here: the ifp must be stored in the
mbuf header for received packets. Minor performance optimizations. Removed
#ifdef MULTICAST's as this isn't optional in our kernel.
1994-11-09 15:12:44 +00:00
Stefan Eßer
66da596420 Submitted by:
Added hooks for "lsdev" ...
PCI devices should need no individual code for lsdev.
1994-11-02 23:47:14 +00:00
Andreas Schulz
339b10f15d Submitted by: Paul F. Werkowski
Add a quirk line for the SONY SDT-5000 like it is done for the WangDAT tapes.
1994-10-30 00:30:27 +00:00
Jordan K. Hubbard
904c1a11ac Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
Stefan Eßer
c3739b59ec Change some compile time defaults, which may be overridden from the
kernel config file by options lines.
Now the default settings are FAST SCSI, max. 4 TAGS, WIDE transfers,
if supported by the hardware ...
1994-10-27 20:12:46 +00:00
Stefan Eßer
422cdd6132 Modified fifth parameter (imask) to register_intr() according to
new definition of that function.
1994-10-25 23:09:08 +00:00
Stefan Eßer
c6f2eb5edb Added decoding of chipset registers for Pentium 90/100 CPUs. 1994-10-25 18:45:19 +00:00
Poul-Henning Kamp
161e7c8d87 #ifdef'ed the verbose probe messages. Only until I find a good way of
making it run-time selectable, then it will be back (at will).
1994-10-17 21:11:31 +00:00
Stefan Eßer
65005ce25c Fixed typo and message format change to avoid line wrapping. 1994-10-15 23:27:39 +00:00
Stefan Eßer
6055e04518 Submitted by: "Randall W. Dean" <rwd@osf.org>
Fixed typo in initialisation of DMODE:
PCI burst length now really 16 transfers as advertised ...
1994-10-14 23:59:36 +00:00
Stefan Eßer
55f018a694 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
removed PCI mapping call from vga_attach() in pcisupport.c.
1994-10-13 01:12:31 +00:00
Stefan Eßer
152f2ff316 Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
Debugging option changed, getirr() removed.
1994-10-13 01:11:13 +00:00
Stefan Eßer
140e168d9b Submitted by: Matt Thomas <thomas@lkg.dec.com>
Preliminary FAST Ethernet support added (DEC21140).
1994-10-12 11:19:36 +00:00