In certain cases (probably not during normal operation but observed in
the lab during development) ip6_ouput() could return without error
and ifpp (&oifp) not updated.
Given oifp was never initialized we would take the later branch
as oifp was not NULL, and when calling icmp6_ifstat_inc() we would
panic dereferencing a garbage pointer.
For code stability initialize oifp to NULL before first use to always
have a deterministic value and not rely on a called function to behave
and always and for ever do the work for us as we hope for.
MFC after: 3 days
Sponsored by: Netflix
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
When VIMAGE is enabled make sure the "m_pkthdr.rcvif" pointer is set
for all mbufs being input by the IGMP/MLD6 code. Else there will be a
NULL-pointer dereference in the netisr code when trying to set the
VNET based on the incoming mbuf. Add an assert to catch this when
queueing mbufs on a netisr to make debugging of similar cases easier.
Found by: Vladislav V. Prodan
PR: 244002
Reviewed by: bz@
MFC after: 1 week
Sponsored by: Mellanox Technologies
r354748-354750 replaced the KAME macros with m_pulldown() calls.
Contrary to the rest of the network stack m_len checks before m_pulldown()
were not put in placed (see r354748).
Put these m_len checks in place for now (to go along with the style of the
network stack since the initial commits). These are not put in for
performance but to avoid an error scenario (even though it also will help
performance at the moment as it avoid allocating an extra mbuf; not because
of the unconditional function call).
The observed error case went like this:
(1) an mbuf with M_EXT arrives and we call m_pullup() unconditionally on it.
(2) m_pullup() will call m_get() unless the requested length is larger than
MHLEN (in which case it'll m_freem() the perfectly fine mbuf) and migrate the
requested length of data and pkthdr into the new mbuf.
(3) If m_get() succeeds, a further m_pullup() call going over MHLEN will fail.
This was observed with failing auto-configuration as an RA packet of
200 bytes exceeded MHLEN and the m_pullup() called from nd6_ra_input()
dropped the mbuf.
(Re-)adding the m_len checks before m_pullup() calls avoids this problems
with mbufs using external storage for now.
MFC after: 3 weeks
Sponsored by: Netflix
in6ifa_ifpforlinklocal() asserts the net epoch. The test case from r354832
revealed code paths where we call into the function without having
acquired the net epoch first and consequently we hit the assert.
This happens in certain MLD states during VNET shutdown and most people
normaly not notice this.
For correctness acquire the net epoch around calls to
mld_v1_transmit_report() in all cases to avoid the assertion firing.
MFC after: 2 weeks
Sponsored by: Netflix
After r354748 mld_input() can change the mbuf. The new pointer
is never returned to icmp6_input() and when passed to
icmp6_rip6_input() the mbuf may no longer valid leading to
a panic.
Pass a pointer to the mbuf to mld_input() so we can return an
updated version in the non-error case.
Add a test sending an MLD packet case which will trigger this bug.
Pointyhat to: bz
Reported by: gallatin, thj
MFC After: 2 weeks
X-MFC with: r354748
Sponsored by: Netflix
Remove the KAME introduced PULLDOWN_TESTs which did not even
have a compile-time option in sys/conf to turn them on for a
custom kernel build. They made the code a lot harder to read
or more complicated in a few cases.
Convert the IP6_EXTHDR_CHECK() calls into FreeBSD looking code.
Rather than throwing the packet away if it would not fit the
KAME mbuf expectations, convert the macros to m_pullup() calls.
Do not do any extra manual conditional checks upfront as to
whether the m_len would suffice (*), simply let m_pullup() do
its work (incl. an early check).
Remove extra m_pullup() calls where earlier in the function or
the only caller has already done the pullup.
Discussed with: rwatson (*)
Reviewed by: ae
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22334
In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.
MFC after: 3 weeks
Sponsored by: Netflix
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
Previously the ICMPv6 input path incorrectly handled cases where an
MLDv2 listener query packet was internally fragmented across multiple
mbufs.
admbugs: 921
Submitted by: jtl
Reported by: CJD of Apple
Approved by: so
MFC after: 0 minutes
Security: CVE-2019-5608
connectivity.
Looking at past changes in this area like r337866, some refcounting
bugs have been introduced, one by one. For example like calling
in6m_disconnect() and in6m_rele_locked() in mld_v1_process_group_timer()
where previously no disconnect nor refcount decrement was done.
Calling in6m_disconnect() when it shouldn't causes IPv6 solitation to no
longer work, because all the multicast addresses receiving the solitation
messages are now deleted from the network interface.
This patch reverts some recent changes while improving the MLD
refcounting and concurrency model after the MLD code was converted
to using EPOCH(9).
List changes:
- All CK_STAILQ_FOREACH() macros are now properly enclosed into
EPOCH(9) sections. This simplifies assertion of locking inside
in6m_ifmultiaddr_get_inm().
- Corrected bad use of in6m_disconnect() leading to loss of IPv6
connectivity for MLD v1.
- Factored out checks for valid inm structure into
in6m_ifmultiaddr_get_inm().
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
This is actually several different bugs:
- The code is not designed to handle inpcb deletion after interface deletion
- add reference for inpcb membership
- The multicast address has to be removed from interface lists when the refcount
goes to zero OR when the interface goes away
- decouple list disconnect from refcount (v6 only for now)
- ifmultiaddr can exist past being on interface lists
- add flag for tracking whether or not it's enqueued
- deferring freeing moptions makes the incpb cleanup code simpler but opens the
door wider still to races
- call inp_gcmoptions synchronously after dropping the the inpcb lock
Fundamentally multicast needs a rewrite - but keep applying band-aids for now.
Tested by: kp
Reported by: novel, kp, lwhsu
It is possible that ifma_protospec becomes NULL in this function for
some entry, but it is still referenced and thus it will not unlinked
from the list. Then "restart" condition triggers and this entry with
NULL ifma_protospec will lead to page fault.
PR: 228982
to sleep on commands to the NIC when updating multicast filters. More generally this permitted
driver's to use an sx as a softc lock. Unfortunately this change introduced a race whereby a
a multicast update would still be queued for deletion when ifconfig deleted the interface
thus calling down in to _purgemaddrs and synchronously deleting _all_ of the multicast addresses
on the interface.
Synchronously remove all external references to a multicast address before enqueueing for delete.
Reported by: lwhsu
Approved by: sbruno
Multicast incorrectly calls in to drivers with a mutex held causing drivers
to have to go through all manner of contortions to use a non sleepable lock.
Serialize multicast updates instead.
Submitted by: mmacy <mmacy@mattmacy.io>
Reviewed by: shurd, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14969
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
a reply to the MLDv2 General Query. In case when router has a lot of
multicast groups, the reply can take several packets due to MTU limitation.
Also we have a limit MLD_MAX_RESPONSE_BURST == 4, that limits the number
of packets we send in one shot. Then we recalculate the timer value and
schedule the remaining packets for sending.
The problem is that when we call mld_v2_dispatch_general_query() to send
remaining packets, we queue new reply in the same mbuf queue. And when
number of packets is bigger than MLD_MAX_RESPONSE_BURST, we get endless
reply of MLDv2 reports.
To fix this, add the check for remaining packets in the queue.
PR: 204831
MFC after: 1 week
Sponsored by: Yandex LLC
represents a context.
- Preserve name 'struct mld_ifinfo' for a new structure, that will be stable
API between userland and kernel.
- Make sysctl_mld_ifinfo() return the new 'struct mld_ifinfo', instead of
old one, which had a bunch of internal kernel structures in it.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
the knowledge of mbuf layout, and in particular constants such as M_EXT,
MLEN, MHLEN, and so on, in mbuf consumers by unifying various alignment
utility functions (M_ALIGN(), MH_ALIGN(), MEXT_ALIGN() in a single
M_ALIGN() macro, implemented by a now-inlined m_align() function:
- Move m_align() from uipc_mbuf.c to mbuf.h; mark as __inline.
- Reimplement M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() using m_align().
- Update consumers around the tree to simply use M_ALIGN().
This change eliminates a number of cases where mbuf consumers must be aware
of whether or not mbufs returned by the allocator use external storage, but
also assumptions about the size of the returned mbuf. This will make it
easier to introduce changes in how we use external storage, as well as
features such as variable-size mbufs.
Differential Revision: https://reviews.freebsd.org/D1436
Reviewed by: glebius, trasz, gnn, bz
Sponsored by: EMC / Isilon Storage Division
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
features. The changes in particular are:
o Remove rarely used "header" pointer and replace it with a 64bit protocol/
layer specific union PH_loc for local use. Protocols can flexibly overlay
their own 8 to 64 bit fields to store information while the packet is
worked on.
o Mechanically convert IP reassembly, IGMP/MLD and ATM to use pkthdr.PH_loc
instead of pkthdr.header.
o Extend csum_flags to 64bits to allow for additional future offload
information to be carried (e.g. iSCSI, IPsec offload, and others).
o Move the RSS hash type enumerator from abusing m_flags to its own 8bit
rsstype field. Adjust accessor macros.
o Add cosqos field to store Class of Service / Quality of Service information
with the packet. It is not yet supported in any drivers but allows us to
get on par with Cisco/Juniper in routing applications (plus MPLS QoS) with
a modernized ALTQ.
o Add four 8 bit fields l[2-5]hlen to store the relative header offsets
from the start of the packet. This is important for various offload
capabilities and to relieve the drivers from having to parse the packet
and protocol headers to find out location of checksums and other
information. Header parsing in drivers is a lot of copy-paste and
unhandled corner cases which we want to avoid.
o Add another flexible 64bit union to map various additional persistent
packet information, like ether_vtag, tso_segsz and csum fields.
Depending on the csum_flags settings some fields may have different usage
making it very flexible and adaptable to future capabilities.
o Restructure the CSUM flags to better signify their outbound (down the
stack) and inbound (up the stack) use. The CSUM flags used to be a bit
chaotic and rather poorly documented leading to incorrect use in many
places. Bring clarity into their use through better naming.
Compatibility mappings are provided to preserve the API. The drivers
can be corrected one by one and MFC'd without issue.
o The size of pkthdr stays the same at 48/56bytes (32/64bit architectures).
Sponsored by: The FreeBSD Foundation
in6m_release_locked() to defer calls to mld_v1_transmit_report() until
after the IF_ADDR_LOCK is dropped. This removes a race where the lock
is dropped and reacquired while attempting to walk an interface's
address list.
Reviewed by: bz
MFC after: 1 week
