Commit Graph

231 Commits

Author SHA1 Message Date
Matthew D Fleming
79c3d51b86 Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need
to rely on the format string.  For SYSCTL_PROC instances that I
noticed a discrepancy between the CTLTYPE and the format specifier,
fix the CTLTYPE.
2011-01-18 21:14:13 +00:00
Qing Li
a458eaa039 Adding an address on an interface also requires the loopback route to
that address be installed.

PR:		kern/150481
Submitted by:	Ingo Flaschberger <if at xip.at>
MFC after:	5 days
2010-09-12 18:04:47 +00:00
John Baldwin
c007b96a78 Ensure a minimum "slop" of 10 extra pcb structures when providing a
memory size estimate to userland for pcb list sysctls.  The previous
behavior of a "slop" of n/8 does not work well for small values of n
(e.g. no slop at all if you have less than 8 open UDP connections).

Reviewed by:	bz
MFC after:	1 week
2010-08-17 16:41:16 +00:00
Bjoern A. Zeeb
7a657e630d Enhance the historic behaviour of raw sockets and jails in a way
that we allow all possible jail IPs as source address rather than
forcing the "primary". While IPv6 naturally has source address
selection, for legacy IP we do not go through the pain in case
IP_HDRINCL was not set. People should bind(2) for that.

This will, for example, allow ping(|6) -S to work correctly for
non-primary addresses.

Reported by:	(ten 211.ru)
Tested by:	(ten 211.ru)
MFC after:	4 days
2010-04-27 15:07:08 +00:00
Bjoern A. Zeeb
d0e157f6aa Add pcb reference counting to the pcblist sysctl handler functions
to ensure type stability while caching the pcb pointers for the
copyout.

Reviewed by:	rwatson
MFC after:	7 days
2010-03-17 18:28:27 +00:00
Robert Watson
9bcd427b89 Abstract out initialization of most aspects of struct inpcbinfo from
their calling contexts in {IP divert, raw IP sockets, TCP, UDP} and
create new helper functions: in_pcbinfo_init() and in_pcbinfo_destroy()
to do this work in a central spot.  As inpcbinfo becomes more complex
due to ongoing work to add connection groups, this will reduce code
duplication.

MFC after:      1 month
Reviewed by:    bz
Sponsored by:   Juniper Networks
2010-03-14 18:59:11 +00:00
Luigi Rizzo
b2019e1789 Following up on a request from Ermal Luci to make
ip_divert work as a client of pf(4),
make ip_divert not depend on ipfw.

This is achieved by moving to ip_var.h the struct ipfw_rule_ref
(which is part of the mtag for all reinjected packets) and other
declarations of global variables, and moving to raw_ip.c global
variables for filter and divert hooks.

Note that names and locations could be made more generic
(ipfw_rule_ref is really a generic reference robust to reconfigurations;
the packet filter is not necessarily ipfw; filters and their clients
are not necessarily limited to ipv4), but _right now_ most
of this stuff works on ipfw and ipv4, so i don't feel like
doing a gratuitous renaming, at least for the time being.
2010-01-07 10:39:15 +00:00
Bjoern A. Zeeb
de0bd6f76b Throughout the network stack we have a few places of
if (jailed(cred))
left.  If you are running with a vnet (virtual network stack) those will
return true and defer you to classic IP-jails handling and thus things
will be "denied" or returned with an error.

Work around this problem by introducing another "jailed()" function,
jailed_without_vnet(), that also takes vnets into account, and permits
the calls, should the jail from the given cred have its own virtual
network stack.

We cannot change the classic jailed() call to do that,  as it is used
outside the network stack as well.

Discussed with:	julian, zec, jamie, rwatson (back in Sept)
MFC after:	5 days
2009-12-13 13:57:32 +00:00
Luigi Rizzo
3429911d4d Dispatch sockopt calls to ipfw and dummynet
using the new option numbers, IP_FW3 and IP_DUMMYNET3.
Right now the modules return an error if called with those arguments
so there is no danger of unwanted behaviour.

MFC after:	3 days
2009-12-02 15:50:43 +00:00
Bruce M Simpson
793c70425a Fix a functional regression in multicast.
Userland daemons need to see IGMP traffic regardless of the group;
omit the imo filter check if the proto is IGMP. The kernel part
of IGMP will have already filtered appropriately at this point.

MFC after:      ASAP
Submitted by:   Franz Struwig
Reported by:    Ivor Prebeg, Franz Struwig
2009-11-15 11:07:22 +00:00
Julian Elischer
0b4b0b0fee Virtualize the pfil hooks so that different jails may chose different
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.

Sitting aroung in tree waiting to commit for: 2 months
MFC after:	2 months
2009-10-11 05:59:43 +00:00
Qing Li
9bb7d0f47a Self pointing routes are installed for configured interface addresses
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.

Reviewed by:	bz
MFC after:	immediately
2009-09-15 19:18:34 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
1e77c1056a Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Robert Watson
2d9cfabad4 Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the
in_ifaddrhead and INADDR_HASH address lists.

Previously, these lists were used unsynchronized as they were effectively
never changed in steady state, but we've seen increasing reports of
writer-writer races on very busy VPN servers as core count has gone up
(and similar configurations where address lists change frequently and
concurrently).

For the time being, use rwlocks rather than rmlocks in order to take
advantage of their better lock debugging support.  As a result, we don't
enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion
is complete and a performance analysis has been done.  This means that one
class of reader-writer races still exists.

MFC after:      6 weeks
Reviewed by:    bz
2009-06-25 11:52:33 +00:00
Robert Watson
8896f83a58 Add a new function, ifa_ifwithaddr_check(), which rather than returning
a pointer to an ifaddr matching the passed socket address, returns a
boolean indicating whether one was present.  In the (near) future,
ifa_ifwithaddr() will return a referenced ifaddr rather than a raw
ifaddr pointer, and the new wrapper will allow callers that care only
about the boolean condition to avoid having to free that reference.

MFC after:	3 weeks
2009-06-22 10:59:34 +00:00
Roman Divacky
e40bae9a45 Switch cmd argument to u_long. This matches what if_ethersubr.c does and
allows the code to compile cleanly on amd64 with clang.

Reviewed by:	rwatson
Approved by:	ed (mentor)
2009-06-21 10:29:31 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Marko Zec
bc29160df3 Introduce an infrastructure for dismantling vnet instances.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state.  The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.

While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers.  Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.

Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels.  Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.

Bump __FreeBSD_version to 800097.
Reviewed by:	bz, julian
Approved by:	rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
Robert Watson
bcf11e8d00 Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.

Discussed with:	pjd
2009-06-05 14:55:22 +00:00
Luigi Rizzo
115a40c7bf More cleanup in preparation of ipfw relocation (no actual code change):
+ move ipfw and dummynet hooks declarations to raw_ip.c (definitions
  in ip_var.h) same as for most other global variables.
  This removes some dependencies from ip_input.c;

+ remove the IPFW_LOADED macro, just test ip_fw_chk_ptr directly;

+ remove the DUMMYNET_LOADED macro, just test ip_dn_io_ptr directly;

+ move ip_dn_ruledel_ptr to ip_fw2.c which is the only file using it;

To be merged together with rev 193497

MFC after:	5 days
2009-06-05 13:44:30 +00:00
Pawel Jakub Dawidek
f44270e764 - Rename IP_NONLOCALOK IP socket option to IP_BINDANY, to be more consistent
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
  as there is no more space for more SOL_SOCKET options, but this option also
  fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
  functionality (currently only unjail root can use it).

Discussed with:	julian, adrian, jhb, rwatson, kmacy
2009-06-01 10:30:00 +00:00
Marko Zec
f6dfe47a14 Permit buiding kernels with options VIMAGE, restricted to only a single
active network stack instance.  Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:

1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables.  As an example, V_ifnet becomes:

    options VIMAGE:          ((struct vnet_net *) vnet_net)->_ifnet
    default build:           vnet_net_0._ifnet
    options VIMAGE_GLOBALS:  ifnet

2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:

    INIT_VNET_NET(ifp->if_vnet); becomes

    struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];

3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals.  If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.

4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet.  options VIMAGE builds
will fill in those fields as required.

5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.

6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod.  SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.

Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.

Reviewed by:	bz, rwatson
Approved by:	julian (mentor)
2009-04-30 13:36:26 +00:00
Robert Watson
86425c62a0 Update stats in struct ipstat using four new macros, IPSTAT_ADD(),
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel.  This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.

MFC after:	3 days
2009-04-11 23:35:20 +00:00
Bruce M Simpson
d10910e6ce Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD
IPv4 stack.

Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.

__FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
Bjoern A. Zeeb
33553d6e99 For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
2009-02-27 14:12:05 +00:00
Jamie Gritton
b89e82dd87 Standardize the various prison_foo_ip[46] functions and prison_if to
return zero on success and an error code otherwise.  The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family.  For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.

Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes).  Remove the explicit
jailed() checks that preceded many of the function calls.

Approved by:	bz (mentor)
2009-02-05 14:06:09 +00:00
Bjoern A. Zeeb
1cecba0fcd For consistency with prison_{local,remote,check}_ipN rename
prison_getipN to prison_get_ipN.

Submitted by:	jamie (as part of a larger patch)
MFC after:	1 week
2009-01-25 10:11:58 +00:00
Kip Macy
3bb87a6c70 check pointer against NULL
add new line after declaration for style
2008-12-16 03:18:59 +00:00
Marko Zec
385195c062 Conditionally compile out V_ globals while instantiating the appropriate
container structures, depending on VIMAGE_GLOBALS compile time option.

Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out.  Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.

Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively

#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif

Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.

Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs.  This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.

Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.

De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps.  PF virtualization will be done
separately, most probably after next PF import.

Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw.  Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-12-10 23:12:39 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Bjoern A. Zeeb
413628a7e3 MFp4:
Bring in updated jail support from bz_jail branch.

This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..

SCTP support was updated and supports IPv6 in jails as well.

Cpuset support permits jails to be bound to specific processor
sets after creation.

Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.

DDB 'show jails' command was added to aid debugging.

Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.

Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.

Bump __FreeBSD_version for the afore mentioned and in kernel changes.

Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
  and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
  help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
  suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
  on cluster machines as well as all the testers and people
  who provided feedback the last months on freebsd-jail and
  other channels.
- My employer, CK Software GmbH, for the support so I could work on this.

Reviewed by:	(see above)
MFC after:	3 months (this is just so that I get the mail)
X-MFC Before:   7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
Julian Elischer
bc97ba5100 Fix a scope problem in the multiple routing table code that stopped the
SO_SETFIB socket option from working correctly.

Obtained from:	Ironport
MFC after:	3 days
2008-11-19 19:19:30 +00:00
Marko Zec
44e33a0758 Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
Bjoern A. Zeeb
f08ef6c595 Add cr_canseeinpcb() doing checks using the cached socket
credentials from inp_cred which is also available after the
socket is gone.
Switch cr_canseesocket consumers to cr_canseeinpcb.
This removes an extra acquisition of the socket lock.

Reviewed by:	rwatson
MFC after:	3 months (set timer; decide then)
2008-10-17 16:26:16 +00:00
Bjoern A. Zeeb
c6ddb94cf2 Remove an INP_RUNLOCK() missed in SVN r183606, cvs rev. 1.195 raw_ip.c
when transitioning from so_cred to inp_cred.

MFC after:	6 weeks
2008-10-04 16:48:09 +00:00
Bjoern A. Zeeb
86d02c5c63 Cache so_cred as inp_cred in the inpcb.
This means that inp_cred is always there, even after the socket
has gone away. It also means that it is constant for the lifetime
of the inp.
Both facts lead to simpler code and possibly less locking.

Suggested by:	rwatson
Reviewed by:	rwatson
MFC after:	6 weeks
X-MFC Note:	use a inp_pspare for inp_cred
2008-10-04 15:06:34 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Julian Elischer
ac957cd271 A bunch of formatting fixes brough to light by, or created by the Vimage commit
a few days ago.
2008-08-20 01:05:56 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Alexander Motin
18f401c664 Some style and assertion fixes to the previous commits hinted by rwatson.
There is no functional changes.
2008-07-28 06:57:28 +00:00
Alexander Motin
0ca3b0967b According to in_pcb.h protocol binding information has double locking.
It allows access it while list travercing holding only global pcbinfo lock.
This relaxed locking noticably increses receive socket lookup performance.
2008-07-26 21:12:00 +00:00
Alexander Motin
9ed324c9a5 Add hash table lookup for a fully connected raw sockets.
This gives significant performance improvements when many raw sockets used.
Benchmarks of mpd handeling 1000 simultaneous PPTP connections show up to 50%
performance boost. With higher number of connections benefit becomes even
bigger. PopTop snd others should also get some benefits.
2008-07-26 17:32:15 +00:00
Robert Watson
3b19fa3597 Eliminate use of the global ripsrc which was being used to pass address
information from rip_input() to rip_append().  Instead, pass the source
address for an IP datagram to rip_append() using a stack-allocated
sockaddr_in, similar to udp_input() and udp_append().

Prior to the move to rwlocks for inpcbinfo, this was not a problem, as
use of the global was synchronized using the ripcbinfo mutex, but with
read-locking there is the potential for a race during concurrent
receive.

This problem is not present in the IPv6 raw IP socket code, which
already used a stack variable for the address.

Spotted by:	mav
MFC after:	1 week (before inpcbinfo rwlock changes)
2008-07-18 10:47:07 +00:00
Robert Watson
cec9ffee22 Rename raw_append() to rip_append(): the raw_ prefix is generally used
for functions in the generic raw socket library (raw_cb.c, raw_usrreq.c),
and they are not used for IPv4 raw sockets.

MFC after:	3 days
2008-07-05 18:55:03 +00:00
Robert Watson
0ae76120da Improve approximation of style(9) in raw socket code. 2008-07-05 18:03:39 +00:00
Robert Watson
22c82719cf Consistently check IPFW and DUMMYNET privileges in the configuration
routines for those modules, rather than in the raw socket code.  This
each privilege check to occur in exactly once place and avoids
duplicate checks across layers.

MFC after:	3 weeks
Sponsored by:	nCircle Network Security, Inc.
2008-05-22 08:10:31 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Robert Watson
9ad11dd8a4 With IPv4 raw sockets, read lock rather than write lock the inpcb when
receiving or transmitting.

With IPv6 raw sockets, read lock rather than write lock the inpcb when
receiving.  Unfortunately, IPv6 source address selection appears to
require a write lock on the inpcb for the time being.

MFC after:	3 months
2008-04-21 12:06:41 +00:00