Commit Graph

135 Commits

Author SHA1 Message Date
Bruce Evans
3b3bedbc0e Added some delays to the probe. This might fix some incompatible UARTs
(the ones that take more than a few hundred nsec and less than 1 msec to
switch their IRQ output).
1996-02-25 21:10:54 +00:00
Poul-Henning Kamp
e8cbe8fa47 Avoid local sprintfs and other printf'isms. 1996-01-25 07:21:50 +00:00
Garrett Wollman
0e41ee3037 Convert DDB to new-style option. 1996-01-04 21:13:23 +00:00
Bruce Evans
5c0ea38c00 Restored likely_com_ports[] from rev.1.122 so that Hayes ESP support at
least compiles.
1995-12-30 03:52:58 +00:00
Bruce Evans
768fd661e4 Added support for the Hayes ESP serial card.
Submitted by:	Sean Eric Fagan (sef@kithrup.com)
Based on code by John Vinopal (banshee@resort.com)
Cosmetic (I hope) changes by me (bde).
1995-12-29 12:51:32 +00:00
Bruce Evans
bfd6eab381 Fixed bugs introduced in rev. 1.127 (some broken 16650 support was
unintentionally committed):
- the fifo was completely disabled for low speeds.  Apart from being
  unnecessarily inefficient, this invalidated com->tx_fifo_size.
- `ftl' became a bogus name.
- the 16650 probe breaks the COM_NOFIFO() case and has other bugs
  (disabled, not fixed).

Fixed bogus change of the fifo settings for the non-speed of 0.  This
bug made the above fifo bug occur even at non-low speeds.

Fixed the modes of the cua devices.  It isn't possible to set the uid
and gid correctly since the kernel can't know who uucp.dialer is.

Register the devswitch at device attach time.  SYSINIT() is not
the right way to initialize devswitches (if anything :->).
Eventually, the devswitch should be deregistered at device detach
and/or unload time and reregistered at device attach time ...  Then
some com->gone tests could be removed.

Cleaned up some other recent changes.
1995-12-22 14:58:55 +00:00
Bruce Evans
81ab2caf0a Replaced nxreset by noreset (if the reset function gets called, then the
device must be configured.  It's hard to tell whether a reset function
should be noreset or nullreset since reset functions are never called.
Most drivers use nullreset but noreset has the advantage of complaining
if somehow gets called).
1995-12-10 20:54:38 +00:00
Bruce Evans
c73feca0b7 Removed new alias d_size_t for d_psize_t.
Removed old aliases d_rdwr_t and d_ttycv_t for d_read_t/d_write_t and
d_devtotty_t.

Sorted declarations of switch functions into switch order.

Removed duplicated comments and declarations of nonexistent switch
functions.
1995-12-10 15:55:34 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Bruce Evans
86a1c05db0 Removed unnecessary #includes of <sys/user.h>. Some of these were just
to get the definitions of TRUE and FALSE which happen to be defined in
a deeply nested include.

Added nearby #includes of <sys/conf.h> where appropriate.
1995-12-06 23:44:23 +00:00
Bruce Evans
56cb20cd72 Removed builtin list of port addresses. The address for sio3
conflicted with S3 graphics cards.  Now users should put sio[2-3]
in the config file if the hardware exisst, even if the probe is
certain to fail due to an interrupt conflict.  Otherwise, ports
sharing the interrupt may fail the probe if the system is warm
booted while sio[2-3] are active (perhaps under another OS).  The
same problem for nonstandard ports is now handled better than
before.
1995-11-29 15:00:07 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
Bruce Evans
6ad175be4d Restored static variable `nsio_tty' which is used only by pstat(8). Made
it `const' to inhibit compiler warnings.

Added #include of <pccard/driver.h> to get prototypes.  <pccard/slot.h>
is still necessary for its side effect of exporting non-slot things.
1995-11-21 09:15:04 +00:00
Poul-Henning Kamp
bf6a29da66 Fix compiler warnings. 1995-11-20 12:13:32 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Bruce Evans
4fda91c705 Moved prototypes for devswitch functions from conf.c and driver sources
to <machine/conf.h>.  conf.h was mechanically generated by
`grep ^d_ conf.c >conf.h'.  This accounts for part of its ugliness.  The
prototypes should be moved back to the driver sources when the functions
are staticalized.
1995-11-04 13:25:33 +00:00
Bruce Evans
f668386c04 sio.c:
Fix the tests for being a console by reverting to the ones that
were used before the the RB_SERIAL changes.  RB_SERIAL only needs
to be tested in one place.  The initialization of comconsole was
wrong before the RB_SERIAL changes for the COMCONSOLE case.  This
may have been the cause of the unnecessary changes.

Start eliminating #includes of <i386/i386/cons.h>.  This header is
supposed to be included from <machine> although it should be
completely machine-independent and included from <sys>.

Remove a wrong XXX comment.  `comconsole' is used to test for being
a console and even the tests for deciding the default termios state
are necessary (the semi-reentrant i/o routines don't handle ordinary
device i/o).

cy.c:
Sync with sio.c.  The console tests are present but always fail.
1995-10-22 15:38:08 +00:00
Poul-Henning Kamp
b59d7f4673 A mixed bag of changes, relating to getting the state in "lsdev" right,
and pccard support to work sensibly.  Better by far, but still not good.
1995-10-21 00:55:36 +00:00
David Greenman
b025187719 siostop() is a void function, so don't return a value. 1995-09-24 04:59:16 +00:00
Poul-Henning Kamp
ccdbc84cba The stuff needed to remove a pccard with a sio port on it...
Not optimal, but pretty solid.
1995-09-19 12:37:41 +00:00
Poul-Henning Kamp
0d2966d3f2 Andrew McRae's pcmcia/pccard code, the kernel part.
This is still very green, but I have managed to get my modem working.
Lots of work still to do, but now at least we can commit it. /phk

Reviewed by:	phk
Submitted by:	Andrew McRae <andrew@mega.com.au>
1995-08-24 08:56:20 +00:00
Bruce Evans
6097a1e94f Disable fifos in sioclose(). Closes PR 576. 1995-08-13 07:49:35 +00:00
Bruce Evans
1856afe955 Sleep on a better address to wait for output to drain out of the
hardware.  Set the sleep-on flag for the address so there is more
than a small chance that the sleep address is actually used (this
used to work by timing out).  Don't bother clearing the sleep-on
flag after a timeout here or elsewhere since leaving it set just
generates a few null calls to wakeup().
1995-07-31 21:10:36 +00:00
Bruce Evans
f3b37f91c1 Improve input flow control.
Use input buffer watermarks of TTYHOG-512 (high) and (high)*7/8
(low) instead of TTYHOG/2 (high) and TTYHOG/5 (low) to agree with
some drivers.  512 is magic and some things depended on TTYHOG/2
>= TTYHOG-512 to work; now they depend on the 512 magic not changing
and TTYHOG-512 being significantly larger than 0.  This should be
handled in ttsetwater().

Separate the decision about whether to do input flow control from
doing it.  ttyblock() now just starts input flow control (hardware
and/or software) and there is a new function ttyunblock() to stop
it.  The decisions are the same except for the watermark changes
and allowing for input expansion for PARMRK.

When flushing input, try harder at first to send a start character
if required, but give up if the first attempt fails.

cy.c, rc.c, sio.c:
Simplify: let ttyinput() handle input flow control if it is not
being bypassed.  Use ttyblock() to start flow control otherwise.

rc.c:
Use same input flow control test as elsewhere: test in a more
efficient order and start flow control at >= highwater instead of
at > highwater.
1995-07-31 18:29:51 +00:00
Bruce Evans
611c22c117 Don't let IXOFF or ECHONL stop the setting of TS_CAN_BYPASS_L_RINT. IXOFF
is handled at a low level, and ECHONL only applies if ICANON is set,
although tty.c sometimes bogusly applies it when ICANON isn't set.
1995-07-29 08:33:13 +00:00
Bruce Evans
4ce7d32178 Always wake up writers after clearing TS_BUSY. This will soon be
essential when I fix excessive wakeups for output-below-low-water.
In cy.c and sio.c, wake up via the driver start routine to also
eliminate duplicated code involving the clearing of TS_TTSTOP.

Always (except in code to be replaced soon) call driver start
routine directly instead of going through ttstart().
1995-07-29 04:05:57 +00:00
Bruce Evans
abe8bea470 Obtained from: partly from ancient patches of mine via 1.1.5
Give names to the magic tty i/o sleep addresses and use them.  This makes
it easier to remember what the addresses are for and to keep them unique.
1995-07-22 16:45:22 +00:00
Bruce Evans
a16721a13a Move the inline code for waking up writers to a new function
ttwwakeup().  The conditions for doing the wakeup will soon become
more complicated and I don't want them duplicated in all drivers.

It's probably not worth making ttwwakeup() a macro or an inline
function.  The cost of the function call is relatively small when
there is a process to wake up.  There is usually a process to wake
up for large writes and the system call overhead dwarfs the function
call overhead for small writes.
1995-07-22 01:30:45 +00:00
Bruce Evans
2ce42987d3 Obtained from: partly from ancient patches of mine via 1.1.5
Move static termioschars() from a couple of drivers to tty.c.  Now there
is only one copy of ttydefchars[].
1995-07-21 22:52:01 +00:00
Bruce Evans
aa96081f8b Fix error logging:
- get the timeout countdown right
- report everything before turning timeouts off.
1995-07-05 14:30:07 +00:00
Andrey A. Chernov
5575abefeb Fight with hanging modems continued:
return EIO after t_timeout expired instead infinite looping in "siotx"
in comparam, consuming CPU time.
1995-06-28 17:58:14 +00:00
Bruce Evans
33dc7e1b84 Reduce timeout frequency from `hz' to 0 if no ports are open or to 1 if
no ports are active, provided there are no polled ports and no
`LOSESOUTINTS' ports.  Do a little more in the interrupt handler instead.
This is a little less efficient if there are are many active ports but
a little more efficient otherwise.  Polled ports are ones with no irq
specified (as before).  `LOSESOUTINTS' ports are ones with 0x08 set in
their config flags.  Unless this flag is set, it will now take up to one
second to recover from lost output interrupts, if any.  Some 8250s and
16450s lose output interrupts.

Improve output buffering: copy the clist buffer to 2 linear buffers if
necessary and possible instead of to 1.  Handle an arbitrary queue of
buffers in the interrupt handler.  Check for waking up sleepers after
copying characters out of the clist buffer instead of before.

Delay translation of TIOCM_DTR to MCR_DTR etc. so that the top level
routines are more machine independent.

Fix bogus device register in unused code.
1995-06-25 04:51:01 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Rodney W. Grimes
b2b795f07c Fix -Wformat warnings from LINT kernel. 1995-05-11 19:26:53 +00:00
Andrey A. Chernov
e73e1e3715 Add hook for pstat -t 1995-05-07 23:00:02 +00:00
Bruce Evans
8d98ed564c Move declarations of console functions to cons.h (they should be
config(8)ed).

Update other misplaced prototypes.
1995-04-23 12:41:57 +00:00
Bruce Evans
33242876a4 Fix initializations of kdc_state for serial consoles.
Change order of RTS flow control tests so that less tests are required
in the usual case.

Clean up parts of previous commits.  Cosmetic.
1995-04-15 21:45:16 +00:00
Garrett Wollman
ae60406da6 Forgot two things in yesterday's massive devconf update:
initialized class for sio
don't bogusly re-initialize it in sio_registerdev()
1995-04-13 15:03:29 +00:00
Andrey A. Chernov
3cf91c530d Move setcompat code to another place, initial/locked devices
not supposed to work with old style ioctls
1995-04-13 11:11:11 +00:00
Andrey A. Chernov
d17ad80fda Comment out ttcompat via COMPAT_SUNOS too
Fix error handling initial/callout devices
1995-04-13 09:22:40 +00:00
Poul-Henning Kamp
04a6a5a9ac ttsetcompat is a '#ifdef COMPAT_43' feature.
Dropping into the debugger when a break comes down the serial line is a
>MISFEATURE (1st class)< and has been put under it's own #ifdef.  This
should be a magic sequence of chars instead.
1995-04-12 22:00:41 +00:00
Garrett Wollman
6c0081e92b Add a class field to devconf and mst drivers.
For those where it was easy, drivers were also fixed to call
dev_attach() during probe rather than attach (in keeping with the
new design articulated in a mail message five months ago).  For
a few that were really easy, correct state tracking was added as well.
The `fd' driver was fixed to correctly fill in the description.
The CPU identify code was fixed to attach a `cpu' device.  The code
was also massively reordered to fill in cpu_model with somethingremotely
resembling what identifycpu() prints out.  A few bytes saved by using
%b to format the features list rather than lots of ifs.
1995-04-12 20:48:13 +00:00
Andrey A. Chernov
2178b9bb49 Call new ttsetcompat() function for proper working
old v7 ioctls with locking bits.
1995-04-11 17:58:09 +00:00
Andrey A. Chernov
a65a3dd65a Move unit structure member down to optimize com->state per Bruce
suggestion. Move hotchar setting to set_bypass routine and rename it
to disc_optim
1995-04-04 16:26:04 +00:00
Andrey A. Chernov
021ad37586 Allow serial console BREAK to DDB
Use com->unit in several places
1995-04-03 10:29:14 +00:00
Andrey A. Chernov
bedbd95393 Back out changes related to locked bits until more elegant
solution will be found. Remove some unused variables sneaked in.
1995-04-02 19:28:58 +00:00