to accomodate the changes.
Here's a list of things that have changed (I may have left out a few); for a
relatively complete list, see http://people.freebsd.org/~bmilekic/mtx_journal
* Remove old (once useful) mcluster code for MCLBYTES > PAGE_SIZE which
nobody uses anymore. It was great while it lasted, but now we're moving
onto bigger and better things (Approved by: wollman).
* Practically re-wrote the allocation macros in sys/sys/mbuf.h to accomodate
new allocations which grab the necessary lock.
* Make sure that necessary mbstat variables are manipulated with
corresponding atomic() routines.
* Changed the "wait" routines, cleaned it up, made one routine that does
the job.
* Generalized MWAKEUP() macro. Got rid of m_retry and m_retryhdr, as they
are now included in the generalized "wait" routines.
* Sleep routines now use msleep().
* Free lists have locks.
* etc... probably other stuff I'm missing...
Things to look out for and work on later:
* find a better way to (dynamically) adjust EXT_COUNTERS
* move necessity to recurse on a lock from drain routines by providing
lock-free lower-level version of MFREE() (and possibly m_free()?).
* checkout include of mutex.h in sys/sys/mbuf.h - probably violating
general philosophy here.
The code has been reviewed quite a bit, but problems may arise... please,
don't panic! Send me Emails: bmilekic@freebsd.org
Reviewed by: jlemon, cp, alfred, others?
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
newbus for referencing device interrupt handlers.
- Move the 'struct intrec' type which describes interrupt sources into
sys/interrupt.h instead of making it just be a x86 structure.
- Don't create 'ithd' and 'intrec' typedefs, instead, just use 'struct ithd'
and 'struct intrec'
- Move the code to translate new-bus interrupt flags into an interrupt thread
priority out of the x86 nexus code and into a MI ithread_priority()
function in sys/kern/kern_intr.c.
- Remove now-uneeded x86-specific headers from sys/dev/ata/ata-all.c and
sys/pci/pci_compat.c.
re-enable interrupts when actually releasing the lock.
- Bring across some fixes to propagate_priority from the x86 code.
(It still doesn't work properly, however.)
- Use the SMTX state when putting a process that blocks on a mutex to sleep.
- Use mi_switch instead of cpu_switch so that accounting works properly as
well as other things.
- Bring across DDB protection of the spinlock timeout panic which is useful
in a multiple CPU system when 1 CPU enters the debugger holding the
sched_lock so that the other CPU doesn't panic as well resulting in all
sorts of fun things.
- Bring across various other small changes in format strings and comments
to sync up with the x86 code.
fixes a serious problem with the previous version where an input could
have been placed in the same register as an output which would stop
the inline from working properly.
* Redo atomic_{set,clear,add,subtract}_{32,64} as inlines since the code
sequence is shorter than the call sequence to the code in atomic.s.
I will remove the functions from atomic.s after a grace period to allow
people to rebuild kernel modules.
and mtx_exit(). This change tracks the i386 version.
Rename mtx_enter(), mtx_try_enter(), and mtx_exit() and wrap them with cpp
macros that expand to pass filename and line number information. This is
necessary since we're using inline functions instead of macros now.
Add const to the filename pointers passed througout the mtx and witness
code.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
machines. The patch uses an existing global variable in place of the
newbus accessor to get at use_bwx.
This is a quick fix to get miatas booting again; somebody
with more newbus skills than I can muster will have to correct it.
Matt Jacob's description of the problem from the -alpha list:
The IVAR accessor stuff for pcib is incompletely specified for CIA. There's
only one accessor defined, and that's to get the BUS instance number.
<..>
The device methods that try and get at the use_bwx get overriden because
there's only one ivar for CIA's pcib, and that's for hose #, and it's always
zero.
foo_pcib_[read|write]_config() functions rather than relying on
a break or return being in the CFG macro.
This fixes a panic later in the boot process on a UP1000. From
inspection, it looks like this fixes a similar problem in the tsunami code.
Approved by: dfr
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
which call busspace.
* Rework pci config accesses to route through the pcib device instead of
calling a MD function directly.
With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
In summary:
o This file has been moved to sys/compat/linux,
o Any MD syscalls in this file are moved to
linux_machdep.c in sys/i386/linux,
o Include directives, makefiles and config files
have been updated.
that should be better.
The old code counted references to mbuf clusters by using the offset
of the cluster from the start of memory allocated for mbufs and
clusters as an index into an array of chars, which did the reference
counting. If the external storage was not a cluster then reference
counting had to be done by the code using that external storage.
NetBSD's system of linked lists of mbufs was cosidered, but Alfred
felt it would have locking issues when the kernel was made more
SMP friendly.
The system implimented uses a pool of unions to track external
storage. The union contains an int for counting the references and
a pointer for forming a free list. The reference counts are
incremented and decremented atomically and so should be SMP friendly.
This system can track reference counts for any sort of external
storage.
Access to the reference counting stuff is now through macros defined
in mbuf.h, so it should be easier to make changes to the system in
the future.
The possibility of storing the reference count in one of the
referencing mbufs was considered, but was rejected 'cos it would
often leave extra mbufs allocated. Storing the reference count in
the cluster was also considered, but because the external storage
may not be a cluster this isn't an option.
The size of the pool of reference counters is available in the
stats provided by "netstat -m".
PR: 19866
Submitted by: Bosko Milekic <bmilekic@dsuper.net>
Reviewed by: alfred (glanced at by others on -net)
gcc's internal exit() prototypes and the (futile) hackery that we did to
try and avoid warnings. main() was renamed for similar reasons.
Remove an exit related hack from makesyscalls.sh.
ether_ifdetach().
The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.
Reviewed by: julian, freebsd-net
hose are 16 PCI instances apart. This allows us to recognize secondary
PCI busses (at least to a first level) until the pci infrastructure is
fixed.
Turn on support for secondary cycles, too. Redo debug printouts.
Instead, for now (until we get a pci infrastructure cleanup),
assign the PCI bus number to be mcpcia bus instance << 4. This
is to allow secondary bridges some room to be recongnized on
4100 systems.
SYSCTL_LONG macro to be consistent with other integer sysctl variables
and require an initial value instead of assuming 0. Update several
sysctl variables to use the unsigned types.
PR: 15251
Submitted by: Kelly Yancey <kbyanc@posi.net>
irongate chipset (used in the UP1000) which does not support scatter/gather
DMA. We'll still use scatter gather if the core logic chipset supports it.
Reviewed by: dfr
fields, not lex/yacc grammar so it is not an exact match but should be
close enough for most cases.
Deal with 'port?', 'irq?' style specifications. These are parsed as
seperate values in lex/yacc in config(8) but tripped up this helper tool.
deal with filename arguments. It is amazing how much you forget over time.
Thanks to the people that reminded me this. I knew there was an easy way
that didn't involve messing with $argv, filehandles, etc, but just could
not remember - all of my books are on the opposite side of the planet..
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
loader for alpha (Yay!) we still need to explicitly look for boot_verbose-
I assume because the boothowto flags aren't passed to us at boot like x86.
Do some minor cosmetics as well.
Only PCI and on-board ISA peripherials are supported at this time.
This support has been only lightly tested due to a lack of response to my
call for testers on the freebsd-alpha mailing list. It works quite well
on the one AS2100 on which it has been tested, but it may not work on
an AS2100A and should therefore be regarded as experimental.
to various pmap_*() functions instead of looking up the physical address
and passing that. In many cases, the first thing the pmap code was doing
was going to a lot of trouble to get back the original vm_page_t, or
it's shadow pv_table entry.
Inspired by: John Dyson's 1998 patches.
Also:
Eliminate pv_table as a seperate thing and build it into a machine
dependent part of vm_page_t. This eliminates having a seperate set of
structions that shadow each other in a 1:1 fashion that we often went to
a lot of trouble to translate from one to the other. (see above)
This happens to save 4 bytes of physical memory for each page in the
system. (8 bytes on the Alpha).
Eliminate the use of the phys_avail[] array to determine if a page is
managed (ie: it has pv_entries etc). Store this information in a flag.
Things like device_pager set it because they create vm_page_t's on the
fly that do not have pv_entries. This makes it easier to "unmanage" a
page of physical memory (this will be taken advantage of in subsequent
commits).
Add a function to add a new page to the freelist. This could be used
for reclaiming the previously wasted pages left over from preloaded
loader(8) files.
Reviewed by: dillon
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.
The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.
The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.
Reviewed by: freebsd-net
/dev/?random devices. This appears to have been missed when the code
was brought across from the i386. (This should fix the "world build
hangs with everything waiting on 'temp' problem.)
Also add some iovec fixup code in the error path which seems to have
been similarly fixed.
There are a number of other differences between the i386 and alpha
version which have not been examined. This code should still be
considered suspect.
the negative of their blue-box (UNIX/OVMS) counterpart. This was
causing us to panic early in the boot process because we weren't
expecting a negative index into the cpuinit[] array.
Obtained from: NetBSD
Reported by: Brett Bump <bbump@mail.enetis.net>
chipsets. An example of this is the USB controller on these chipsets.
With this, I can now use USB devices on the test Alpha I am borrowing at
the moment.
Reviewed by: dfr, obrien
syscalls including exit(). These entries were unused, so the bugs had no
effect, but the the args struct tag will be used to calculate sy_nargs
correctly. exit() was wrong in all emulators.
like to see the true SRM bus number be passed to us, instead, we get FreeBSD's
PCI bus instance number (Brzzt! Wrong Answer!).
Also, once we've seen the MCPCIA that has the EISA bus on it, call
dec_kn300_cons_init just before configuring devices on this bus.
We'll call it later when, in the natural order of things, we configure
the MCPCIA that has the EISA bus that a serial console and/or VGA and/or
keyboard.
