take advantage of the rc.subr(8) glue. They are renamed dhclient_program
and dhclient_flags.
o Rename them in rc.conf(5)
o Rename them in /etc/defaults/rc.conf
o Add the deprecated variables to /etc/rc.subr
o Isolate the use of the 'command' variable to the
NetBSD specific parts in /etc/rc.d/dhclient.
o Now that dhcp_flags has also been renamed it will
be applied properly by rc.subr(8) glue code.
Reported by: John Nielsen <john@jnielsen.net>
really make much difference since this script is not used during startup
and is due to be removed before RELENG_5.
Submitted by: "Simon L. Nielsen" <simon@nitro.dk>
with the rest of the options following it. This caused problems for
people using ldconfig_insecure=yes because the '-i' switch was being
positioned before the format argument.
Approved by: markm/mentor (implicit), re/rwatson
PR: 47430
script to read /etc/devfs.conf, and take appropriate actions based on
what it finds there.
The (commented out) examples in the new devfs.conf file are taken in
part from the old rc.devfs script.
sessions if the mailer is dynamically linked. This happens because
on some systems the ldconfig script is run after the vi recovery
script.
I thought I had already fixed this with revision 1.5 of rc.d/ldconfig,
but apparently not. So, in addition I'm making ldconfig a requirement
of this script.
Approved by: markm (mentor)(implicit)
PR: bin/51767
We can't remove the sourcing of /etc/rc.devfs yet in case the user
might have custom entries in it. We will have to come up with an
/etc/devfs.rules or something to make this kind of thing easier.
Approved by: markm (mentor)(implicit)
script at which a filesystem will be mounted in FreeBSD. Without this
the script was being inserted later in the boot than necessary.
Approved by: markm (mentor) (implicit)
Reviewed by: dougb
Noticed by: Andrzej ToboÅa <san@wilk.2a.pl>
it doesn't work because the start_cmd doesn't enable ipfilter if
it is currently disabled.
Approved by: markm (mentor) (implicit)
Submitted by: Michael Lyngbøl <lyngbol@bifrost.lyngbol.dk>
PR: conf/46103
o group them together so they run one right after another
o use the NetBSD supplied ipfs script instead of tacking
it on to the end of ipnat
o Load the ipl module in ipnat and ipfilter, if it's not already
loaded
o In ipmon and ipnat show a warning if neither ipfilter nor
ipnat is enabled or the ipl module is not loaded, and exit
Approved by: markm (mentor) (implicit)
Tested by: leafy <leafy@leafy.idv.tw>
This is how it has always been done (before and after rc.d) but
I somehow failed to include it when I broke up network1.
Submitted by: bmah
Approved by: markm (mentor)(implicit)
o /etc/network.subr contains common subroutines used for seting
up network interfaces
o rc.d/hostname sets the hostname if not already set
o rc.d/nisdomain sets the nis domain *after* rpcbind but
before the yp* daemons. This fixes issues with temporary
hangs when looking up informaion in nis before it's ready.
o rc.d/netif brings network interfaces (minus dhcp) up.
o rc.d/network1 has been disabled and will be retired before
RELENG_5. It will be replaced by rc.d/netif
Approved by: markm (mentor)
stop ipfw, but not enable it again.
Aesthetic changes
o Use positve logic (instead of negative)
o create a 'stop' function, rather than putting the
commands in the stop_cmd variable.
Submitted by: des
Approved by: markm (mentor) (implicit)
devd later in the boot process. This should fix all the problems
people have had with those commits. Diskless should be working again,
and those that mount /usr with nfs should be able to do that again too.
critical remote systems. This lets us run commands from devd that
aren't on the / partition. This also means we can remove some kludges
from the networking startup that I added a while ago that caused other
problems.
There's still a race in starting devd that needs to be fixed in devd
so that things present at boot will be configured by the time devd
does daemon(). That race will be fixed later.
device node exists directly to see if OLDCARD is compiled into the
kernel. This eliminates the scary warning that people using NEWCARD
are seeing when they have pccard_enable=YES in their /etc/rc.conf
files.
withough the $natd_interface having to be explicitly specified on the
command line.
Approved by: markm (mentor)
Submitted by: Aaron D. Gifford <agifford@infowest.com>
PR: conf/47024
MFC: upon re approval
named(8) daemon by providing a new rc.conf knob: named_pidfile
that defaults to the path specified in the system-installed named.conf(5).
Approved by: markm (mentor)
Reviewed by: dougb
Noticed by : Galen Sampson <galen_sampson@yahoo.com>
Dan Pelleg <daniel+bsd@pelleg.org>
PR: conf/46402
MFC: 2 weeks (with re@ approval)
Instead, load them as part of the rc.d system. This allows us to prioritize
the initidiskless script so it runs before the configuration files are loaded
and allows us to get rid of the exit 2 hack in /etc/rc. The exit 2 never
worked anyway since it did not unset the prior configuration, causing the
diskless code to not operate properly.
Do a major cleanup and revamping of the diskless code for RCNG. This will
be backported to the non-RCNG scripts as well as -stable.
With suggestions from: Mike Makonnen <mtm@identd.net>
MFC after: 7 days
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
that's being replaced here. This is what /etc/rc does now.
There is no NetBSD devfs, so there is no compatibility issue.
Not objected to by: FreeBSD-rc@yahoogroups.com
Approved by: re (murray)
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
an entry in /etc/sysctl.conf didn't exist. Fixing this exposed a minor
typo "exits" vs. "exist".
However, there doesn't appear to be any provision to run this with
the "lastload" argument, meaning that the error will never appear.
* Space -> tabs conversion.
* Removed blanks before semicolon in "if ... ; then".
* Proper indentation of misindented lines.
* Put a full stop after some comments.
* Removed whitespace at end of line.
Approved by: silence from gordon
script did. Stuff in rc.local frequently has lines like
"echo -n ' service_name'" which look ugly without a prefix and a
trailing period. Likewise for rc.shutdown.local for consistency.
a per-machine or per-cluster (with different ways of expressing what's
part of a cluster) basis. In order for this to be effective, rc.conf
has to be reread after initdiskless is finished. Implement this by
adding a hook to etc/rc which rereads rc.conf by request. This can
also be implemented by renaming initdiskless to initdiskless.sh and
sourcing rc.conf there manually, but it was decided that, that would
be uglier than a hook in etc/rc.
Developed in concert with: gordon
rcNG. The $amd_flags variable was already taken over into $rc_flags
by run_rc_command() when amd_precmd() is executed, so changing
$amd_flags there no longer effects the actual execution of amd.
Hence in amd_precmd() the $rc_flags have to be adjusted instead.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable -> mountd_enable
Changing the mountd flags brings us closer to NetBSD.
All of the old variable names are shimmed so you can continue to use the
old variable name.
Finally make /etc/rc.d/mountd no longer dependent on nfs as there are
(apparently) other consumers of mountd.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
/etc filesystem isn't enough; consequently, add "-i 4096" to the newfs
command for /etc. This results in 1022 inodes, which should be enough
for the forseeable future (although I don't know why we would ever
have more than 1000 files in a default /etc).
Silence by: -current
while. This is only the script pieces, the glue for the build comes next.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
Reviewed by: silence on -current and -hackers
Prodded by: rwatson
while. This is only the script pieces, the glue for the build comes next.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
Reviewed by: silence on -current and -hackers
Prodded by: rwatson
prevent the interfaces from being initialized by /etc/rc.network6
wrongly. So, you can explicitly initialize the interfaces by
/etc/pccard_ether.
With previous rc.network6, if you specify pccardd_flags="-z",
net.inet6.ip6.accept_rtadv was wronly set to 0, then RA was not
accepted.
was apparently smoking something when I committed the last fix, because as
ume was kindly enough to set me straight on, amd *will* start with no
arguments at all, as long as there is an /etc/amd.conf file for it to
read. What it won't do is start with *just* -p.
In any case, now it's fixed.
only doing ipnat(8). Go back to using $ipfilter_active, but turn off
$ipfilter_active when loading ipl.ko has failed.
Submitted by: devet@devet.org (Arjan de Vet)
MFC after: 3 days
conf file, or command line options. I brought this up in PR 12432,
which (ironically) obrien assigned to me after I became a committer. :)
PR: conf/12432
Submitted by: Me
$ipfilter_active. $ipfilter_enable is set to "NO" if modules fail to
load, and $ipfilter_active can be "YES" when we are not using ipf(8).
MFC after: 3 days
and looks like no other Unix diskless configuration I've ever seen.
Thus allow a more traditional /etc.
Note, the use of an MFS /var should also be settable.
Otherwise installing ports(packages) is just a total PITA.
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
values at all if they are not purposefully set. What if the
administrator messed with them in /etc/sysctl.conf? We don't want to
overwrite them.
If 'log_in_vain' is zero, do not force the issue. If it is non-zero,
set it.
This change was submitted to the freebsd-audit mailing list for review
but received no feedback. Hindsight-enabled reviews are welcome.
PR: conf/31358
Submitted: Thomas Quinot <thomas@cuivre.fr.eu.org>
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
md device and file system creation occurs *after* mtree is run, and
as such an /var/tmp/* or /tmp/* entries will be under the mountpoint
(or fail) rather than appearing in the md filesystems. This prevents
the creation of vi.recover, and might affect other localizations that
rely on the mtree calls affecting these directories.
so swap the order.
Also allow rpc.lockd and rpc.statd to be turned on if nfsclient is
enabled. They are needed to provide client side locking support.
PR: conf/27811
kernel TCP timer code: rather than checking for tcp_keepalive being
set to "YES", check for "NO" and turn off keepalives if the variable
is set in that manner.
o Note: eventually, it would make sense to remove this variable from
rc.conf management, and instead rely on sysctl.conf. In fact, this
is probably true of a number of rc.conf variables whose sole aim
is to drive the setting of sysctls at boot time.
to get it all right, allowing ipnat to be enabled independantly of ipfilter
in rc.conf (among other things).
PR: multiple
Submitted by: Arjan de Vet <devet@devet.org>
Reviewed by: Giorgos Keramidas <keramida@FreeBSD.org>
continuation lines, extra whitespace, and to use the last matching
line in the file. This syncs the host.conf generation with how
the nsswitch.conf is parsed.
Only print " host.conf" instead of a multi-line message, since this
happens on every boot.
- if nsswitch.conf exists, host.conf is auto-generated for compatibility
with legacy applications and libraries.
- if host.conf exists but nsswitch.conf does not, nsswitch.conf is auto-
generated as usual.
is required into rc.network.
Person failed to use a real name so both email addresses from PR included
(Sent was different to From).
PR: 22998
Submitted by: dl@leo.org/spock@empire.trek.org
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
the null mount, we currently create a temporary mfs on /tmp, copy
/etc to /tmp, then mount /etc as mfs and copy everything back from
/tmp, then delete the /tmp mfs.
The patch eliminates the temporary /tmp mfs and the subsequent
copying and simply populates the /etc mfs by copying from
/conf/default/etc. This requires that /conf/default/etc contain a
complete copy of all the /etc stuff instead of just overrides. I
don't think that is too much of an extra step in setting up a
diskless environment.
* Provide the ability to make /tmp a memory filesystem independent
of /var. This removes the requirement that /tmp be a symlink to
/var/tmp and this makes the diskless code work with the default
filesystem layout. If a seperate /tmp memory filesystem is
created, the 'tmpsize' environment variable is used to determine
its size (default to 10 Meg).
* Reduce diffs between the -current and -stable versions of these
files to a bare minimum. Only the definition of the shell
function 'mount_md' is different.
Not Objected to by: -arch@, -small@
MFC after: 2 days
o create a simple wrapper function mount_md that makes it easy to
move from mount_mfs.
# NOTE: you will need to MAKEDEV md[0123] in order for this to work.
Reviewed by: bsd, keichii
default first, then network-specific files, then host-specific files.
I think this was the original intent, as Matt indicated the previous
code appeared to be a bug.
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.
(second of three commits)
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
- ipv6_network_interfaces has all available interfaces to work for
static configuration even if the host is end host. When rtsol is
invoked, singleness of interface is checked.
* Put quotes around each line
* Single quotes for lines with no variable interpolation
* Double quotes if there is
* Capitalize each word that begins a line
* Make echo -n 'Doing foo:' ... echo '.' more of a standard
No functionality changes
- rtsol should be work for only one interface
- new variable ipv6_defaultrouter is added
- option name of rtadvd in comment are corrected
- ipv6_firewall_enable, ipv6_firewall_type, ipv6_firewall_script,
ipv6_firewall_logging are added to introduce rc.firewall6.
IPv6 firewall rule is just starting point and should be brushed up.
This commit includes PR18621, PR21694, PR22051.
PR: conf/18621, conf/21694, conf/22051
Reviewed by: asmodai
the appropriate documentation added to rc.conf(5). If all goes well
with this over the next few weeks, the PR will be closed with the
pullup of patches back to 4-STABLE.
PR: 20202
Submitted by: Gerhard Sittig <Gerhard.Sittig@gmx.net>
Reviewed by: Darren Reed <darrenr@freebsd.org>
Approved by: Darren Reed <darrenr@freebsd.org>
Obtained from: Gerhard Sittig <Gerhard.Sittig@gmx.net>
PC-card stuff. Also print a NEWLINE (!!) after that.
I'm driving mad each time when I see messages related to pccard before
"Enable PC-card." and particulary when I see
"Doing initial network setup". on the same line w/o a break.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
time, I have no idea if there is equivalence of printf. So, stf
setup still depends on /usr. In addition, prefix(8) and gifconfig(8)
are in /usr/sbin. Should we move these into /sbin?
- Sync with latest stf behavior. Latest stf doesn't have link-local
address. And, latest stf is not gif but stf.
options. This allows you to set the standard dynamic port
assignment range prior to any network daemons (like named) starting
up, necessary if you are also using a firewall to restrict lower ports.
will be MFC'd in a few days
scripts may use to source safely overrides in ${rc_conf_files}
files.
This protects users who insist on the bad practice of copying
/etc/defaults/rc.conf to /etc/rc.conf from a recursive loop
that exhausts available file descriptors.
Several people have expressed interest in breaking this function
out into its own shell script. Anyone who wants to embark on
such an undertaking would do well to study the attributed PR.
PR: 17595
Reported by: adrian
Submitted by: Doug Barton <Doug@gorean.org>
reserve, in maximal NFS packets. Originally only 2 packets worth of
space was reserved. The default is now 4, which appears to greatly
improve performance for slow to mid-speed machines on gigabit networks.
Add documentation and correct some prior documentation.
Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
- 6to4(stf) interface configuration.
- Static route configuration.
- Comment additions.
- Replaced a still existed '@' to '%' in IPv6 scoped addr format.
(This became necessary as previous IPv6 scoped addr format change.)
Much thanks to ume, who helped me reviewing, testing, and finding problems
with these changes.
Approved by: jkh
Reviewed by: ume
to avoid error messages printed on /var/log/messages.
Recently added "stf" interface has IFF_MULTICAST bit set,
because IPv6 don't work on non IFF_MULTICAST set interfaces
in current implementation.
But "stf" interface is multi-dest IPv6 over IPv4 tunnel, so
can't treat multicast packet with no special configuration.
On the other hand, tools like "rtadvd", "pim6dd", "pim6sd"
send messages on IFF_MULTICAST set interfaces by default.
So there will be many bogus error message on /var/log/messages,
that multicast packets sent to "stf0" failed.
So,
-strip "stf0" from rtadvd sending interfaces in rc.network6
("rtadvd" is a daemon used only for local subnet, so it
will never need to send its packets over "stf0" interfaces.)
-Add default configuration files for "pim6dd" and "pim6sd",
and disable "stf0" in those files.
Approved by: jkh
