We should have nextboot feature implemented in libsa zfs code.
To get there, I have created zfs_nextboot() implementation based on
two sources, our current simple textual string based approach with added
structured boot label PAD structure from OpenZFS.
Secondly, all nvlist details are moved to separate source file and
restructured a bit. This is done to provide base support to add nvlist
add/update feature in followup updates.
And finally, the zfsboot/gptzfsboot disk access functions are swapped to use
libi386 and libsa.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25324
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix
- Use enc_xform_aes_xts.setkey() directly instead of duplicating the code
now that it no longer calls malloc().
- Rather than bringing back all of xform_userland.h, add a conditional
#include of <stand.h> to xform_enc.h.
- Update calls to encrypt/decrypt callbacks in enc_xform_aes_xts for
separate input/output pointers.
Pointy hat to: jhb
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
When reading less than sector size but from sector boundary,
the vdev_read() will read full sector into the provided buffer
and therefore corrupting memory past buffer end.
MFC after: 2 days
This code was trying to use a pointer value for st_dev, which is definitely
not a pointer. Instead, cast to uintptr_t so it becomes a non-pointer value
before casting it.
Tested: mips-gcc cross compile, mips32 build
On slow platforms, it helps to spread the hashing load
over time so that tftp does not timeout.
Also, some .4th files are too big to fit in cache of pkgfs,
so increase cache size and ensure fully populated.
Reviewed by: stevek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24287
This option is intended to aid development, to allow building with user malloc.
The use case would be to build userboot & test with libc (or other) malloc and
use extra malloc debug features.
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
In some cases the pool discovery will get stuck in infinite loop while setting
up the vdev children.
To fix, we split the vdev setup into two parts, first we create vdevs based on
configuration we do get from pool label, then, we process pool config from MOS
and update the pool config if needed.
Testing done: confirm previously hung loader is not hung any more.
MFC after: 1 week
Instead of passing NULL to fzap_name_equal and crashing, just return
ENOENT. This happened when higher bits of a hash of the searched key
(its hash prefix) matched a hash prefix of some key in the ZAP, but the
full hash value of the searched key did not match any key in the ZAP.
I observerved this problem when loader tried to look up
"features_for_read" in a particular old pool that predates pool
features.
MFC after: 2 weeks
Sponsored by: Panzura
We do allocate amount of memory (void * or char *), and then assign this
buffer to struct iso_primary_descriptor *vd. Make sure we do
allocate enough bytes.
In fact we do allocate enough, but it is good idea to make sure this really
is so.
MFC after: 1 week
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
Include the server IP address when logging nfs_open(), add a few missing
"\n"s, and correct a typo.
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22346
In our case the structure is more complex and simple static initializer
will upset compiler diagnostics - using memset is still better than building
more complext initializer.
Since physical device asize is calculated from psize and the asize is stored
in pool label, we can use asize to set the value of psize, which is used to
calculate the location of the pool labels.
MFC after: 1 week
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
Add ficl words for isvirtualized
and move ficl inb and outb words to ficl/x86/sysdep.c
so can be shared by i386 and amd64
Reviewed by: imp bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22069
When zfs probe did fail and no spa was created, but zfs_fmtdev() is called,
we will crash while dereferencing spa (NULL pointer dereference).
MFC after: 1 week
