for missing devices.
The fsck_ffs(8) utility uses its internal function openfilesys()
when opening a disk to be checked. This change avoids the use
of pfatal() in openfilesys() which always exits with failure (exit
value 8) so that the caller can choose the correct exit value.
In the case of a non-existent device it should exit with value 3
which allows the startup system to wait for drives (such as those
attached by USB) to come online.
Reported by: karels
Tested by: karels
PR: 262580
MFC after: 3 days
The cleanup of fsck_ffs(8) in commit c0bfa109b9 broke fsdb(8).
This commit adds the one-line update needed in fsdb(8) to make it
work with the new fsck_ffs(8) structure.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 3 days
Normally fsck_ffs never does reads or writes that are not aligned
to the size of one of the checked filesystems fragments. The one
exception is when it finds that it needs to write the superblock
recovery information. Here it will write with the alignment reported
by the underlying disk as its sector size as reported by an
ioctl(diskfd, DIOCGSECTORSIZE, &secsize).
Modern disks have a sector size of 4096, but for backward compatibility
with older disks will report that they have a sector size of 512.
When presented with a 512 byte write, they have to read the associated
4096 byte sector, replace the 512 bytes to be written, and write
the updated 4096 byte sector back to the disk. Unfortunately, some
disks report that they have 512 sectors, but fail writes that are not
aligned to 4096 boundaries and are a multiple of 4096 bytes in size.
This commit updates fsck_ffs(8) so that it uses the filesystem fragment
size as the smallest size and alignment for doing writes rather than
the disk's reported sector size.
Reported by: Andriy Gapon
MFC after: 1 week
Part of the problem was that fsck_ffs would read the superblock
multiple times complaining and repairing the superblock check hash
each time and then at the end failing to write out the superblock
with the corrected check hash. This fix reads the superblock just
once and if the check hash is corrected ensures that the fixed
superblock gets written.
Tested by: Peter Holm
PR: 245916
MFC after: 1 week
Sponsored by: Netflix
The segfault was being hit in ckfini() (sbin/fsck_ffs/fsutil.c)
while attempting to traverse the buffer cache to flush dirty buffers.
The tail queue used for the buffer cache was not initialized before
dropping into gjournal_check(). Move the buffer initialization earlier
so that it has been done before calling gjournal_check().
Reported by: crypt47, nvass
Fix by: Robert Wing
Tested by: Robert Wing
PR: 255030
PR: 255979
MFC after: 3 days
Sponsored by: Netflix
making fsck_ffs(8) run faster, there should be no functional change.
The original fsck_ffs(8) had its own disk I/O management system.
When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8)
to do the necessary gjournal rollback. Rather than use the existing
fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly
when journalled soft updates were added in FreeBSD 9, code was added
to fsck_ffs(8) to do the necessary journal rollback. And once again,
rather than using either of the existing fsck_ffs(8) disk I/O
systems, it wrote its own from scratch. Lastly the fsdb(8) utility
uses the fsck_ffs(8) disk I/O management system. In preparation for
making the changes necessary to enable snapshots to be taken when
using journalled soft updates, it was necessary to have a single
disk I/O system used by all the various subsystems in fsck_ffs(8).
This commit merges the functionality required by all the different
subsystems into a single disk I/O system that supports all of their
needs. In so doing it picks up optimizations from each of them
with the results that each of the subsystems does fewer reads and
writes than it did with its own customized I/O system. It also
greatly simplifies making changes to fsck_ffs(8) since everything
goes through a single place. For example the ginode() function
fetches an inode from the disk. When inode check hashes were added,
they previously had to be checked in the code implementing inode
fetch in each of the three different disk I/O systems. Now they
need only be checked in ginode().
Tested by: Peter Holm
Sponsored by: Netflix
over various major releases. Superblock check hashes were added for
the 12 release and cylinder-group and inode check hashes will appear
in the 13 release.
When a disk with a UFS filesystem is writably mounted, the kernel
clears the feature flags for anything that it does not support. For
example, if a UFS disk from a 12-stable kernel is mounted on an
11-stable system, the 11-stable kernel will clear the flag in the
filesystem superblock that indicates that superblock check-hashs
are being maintained. Thus if the disk is later moved back to a
12-stable system, the 12-stable system will know to ignore its
incorrect check-hash.
If the only filesystem modification done on the earlier kernel is
to run a utility such as growfs(8) that modifies the superblock but
neither updates the check-hash nor clears the feature flag indicating
that it does not support the check-hash, the disk will fail to mount
if it is moved back to its original newer kernel.
This patch moves the code that clears the filesystem feature flags
from the mount code (ffs_mountfs()) to the code that reads the
superblock (ffs_sbget()). As ffs_sbget() is used by the kernel mount
code and is imported into libufs(3), all the filesystem utilities
will now also clear these flags when they make modifications to the
filesystem.
As suggested by John Baldwin, fsck_ffs(8) has been changed to accept
and repair bad superblock check-hashes rather than refusing to run.
This change allows fsck to recover filesystems that have been impacted
by utilities older than those created after this change and is a
sensible thing to do in any event.
Reported by: John Baldwin (jhb@)
MFC after: 2 weeks
Sponsored by: Netflix
The only output from fsck that should go to stderr is the usage message.
if setup() fails then exit with EEXIT rather than 0.
Reviewed by: mckusick
Sponsored by: Netflix
This one is also a small list:
- 3x duplicate definition (ufs2_zino, returntosingle, nflag)
- 5x 'needs extern', 3/5 of which are referenced in fsdb
-fno-common will become the default in GCC10/LLVM11.
MFC after: 1 week
shorter than its size resulting in a hole as its final block (which
is a violation of the invarients of the UFS filesystem).
Soft updates will always ensure that the file size is correct when
writing inodes to disk for files that contain only direct block
pointers. However soft updates does not roll back sizes for files
with indirect blocks that it has set to unallocated because their
contents have not yet been written to disk. Hence, the file can
appear to have a hole at its end because the block pointer has been
rolled back to zero when its inode was written to disk. Thus,
fsck_ffs calculates the last allocated block in the file. For files
that extend into indirect blocks, fsck_ffs checks for a size past
the last allocated block of the file and if that is found, shortens
the file to reference the last allocated block thus avoiding having
it reference a hole at its end.
Submitted by: Chuck Silvers <chs@netflix.com>
Tested by: Chuck Silvers <chs@netflix.com>
MFC after: 1 week
Sponsored by: Netflix
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
report the check-hash failure and offer to search for and use
alternate superblocks. Prior to this fix fsck_ffs would simply
report the check-hash failure and exit.
Reported by: Julian H. Stacey <jhs@berklix.com>
Tested by: Peter Holm
Sponsored by: Netflix
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
routine to write out the cylinder groups rather than recreating the
calculation of the cylinder-group check hash in fsck_ffs.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
superblocks created in revision 322297 only works on disks
with sector sizes up to 4K. This update allows the recovery
information to be created by newfs and used by fsck on disks
with sector sizes up to 64K. Note that FFS currently limits
filesystem to be mounted from disks with up to 8K sectors.
Expanding this limitation will be the subject of another
commit.
Reported by: Peter Holm
Reviewed with: kib
unable to automatically find alternate superblocks. This checkin
places the information needed to find alternate superblocks to the
end of the area reserved for the boot block.
Filesystems created with a newfs of this vintage or later will
create the recovery information. If you have a filesystem created
prior to this change and wish to have a recovery block created for
your filesystem, you can do so by running fsck in forground mode
(i.e., do not use the -p or -y options). As it starts, fsck will
ask ``SAVE DATA TO FIND ALTERNATE SUPERBLOCKS'' to which you should
answer yes.
Discussed with: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
a mismatch, but will allow fsck to continue when the last alternate
superblock gets corrupted somehow.
Also, remove searching for alternate super blocks. It should have been
removed two years ago with r276737 by imp@. Leave minor vestiges in
place in case someone wants to solve the hard problem of knowing where
altnernate superblocks live without access to data formerly stored in
disklabels.
Differential Revision: https://reviews.freebsd.org/D11589
Instead of casting listmax and numdirs to unsigned values just define
them as unsigned and avoid the casts. Use reallocarray(3).
While here, fs_ncg is already unsigned so the cast is unnecessary.
Reviewed by: mckusick
MFC after: 2 weeks
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
alternate superblock location when given in the -b option. When int
is 32-bits, block numbers larger than 2^32 would get truncated. This
commit changes the storage fpr the alternate superblock location
to a ufs2_daddr_t.
Submitted by: Dmitry Sivachenko <trtrmitya@gmail.com>
Clang errors around printf could be trivially fixed, but the breakage in
sbin/fsdb were to significant for this type of change.
Submitter of this changeset has been notified and hopefully this can be
restored soon.
that they do not need to be read again in pass5. As this nearly
doubles the memory requirement for fsck, the cache is thrown away
if other memory needs in fsck would otherwise fail. Thus, the
memory footprint of fsck remains unchanged in memory constrained
environments.
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
Due to UFS insistence to pretend that device sector size is 512 bytes,
sector size is obtained from ioctl(DIOCGSECTORSIZE) for real devices,
and from the label otherwise. The file images without label have to
be made with 512 sector size.
In collaboration with: pho
Reviewed by: jeff
Tested by: bz, pho
whether fs_bsize is larger than MINBSIZE, which is larger than the
value that is used to compared with fs_bsize, the sizeof fs, so the
check followed, will be always true.
By inspecting the code and some old commit log, I believe that the
check must be that *fs_sbsize* is larger than sizeof fs. We round
up the size to nearest dev_bsize, as the smallest accepted fs_sbsize,
personally, I think this can be even changed to equal, because this
number is mostly an invariant in file systems.
With this check, fsck_ffs(8) will be more picky and has better
chance rejecting bad first superblock rather than referring to bad
value it supplied, thus gives better chance for it to check the
filesystem carefully.
and -p flag was given perform fast file system checking (bascially only
garbage collecting of orphaned objects).
Rename bread() to blread() and bwrite() to blwrite() as we now link to
the libufs library, which also implement functions with that names.
Sponsored by: home.pl
initializing the sysctl mibs data before actually using them.
The original patchset (which is the actual version that is running
on my testboxes) have checked whether all of these sysctls and
refuses to do background fsck if we don't have them. Kirk has
pointed out that refusing running fsck on old kernels is pointless,
as old kernels will recompute the summary at mount time, so I
have removed these checks.
Unfortunatelly, as the checks will initialize the mib values of
those sysctl's, and which are vital for the runtime summary
adjustment to work, we can not simply remove the check, which
will lead to problem when running background fsck over a dirty
volume. Add these checks in a different way: give a warning rather
than refusing to work, and complain if the functionality is not
available when adjustments are necessary.
Noticed by: A power failure at my lab
Pointy hat: me
MFC After: 3 days
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
trying to use them. Set a minimum value for numdirs when using an
alternate superblock to avoid spurious numdirs == 0 error. Calculate
new fields when using an alternate superblock from a UFS1 filesystem
to avoid segment faulting.
Sponsored by: DARPA & NAI Labs.
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
