Commit Graph

5170 Commits

Author SHA1 Message Date
Gordon Tetlow
42e2c9f18f No longer install /etc/manpath.config since the BSDL man utilities
don't use it.

Approved by:	wes (mentor)
2010-10-04 01:07:04 +00:00
Ed Maste
17332126d1 Commit the rest of r213270.
Thanks to Anonymous <swell dot k at gmail.com> for spotting this.
2010-09-29 22:59:49 +00:00
Ed Maste
e64241487f /etc/rc.d/defaultroute currently bails immediately if all interfaces
set to use DHCP have no carrier.  This can cause grief as it may take
some time for link to be established, and defaultroute may terminate
before this happens.

Introduce a defaultroute_carrier_delay variable and then wait that long
in defaultroute before bailing if no interfaces have carrier.  With the
default settings defaultroute will wait for five seconds for this, and
the original 30 second wait for a default route to appear is unchanged.
Note that there is in discussion an alternative approach to the broader
problem of waiting for DHCP-configured routes.  However, this change
addresses a real problem in the current defaultroute script.

Discussed on:	freebsd-rc@
2010-09-29 13:08:23 +00:00
Warner Losh
8f3ec30476 Prefer echo over printf 2010-09-27 15:55:39 +00:00
Pawel Jakub Dawidek
867b3ba46a Add gptboot script that is responsible for:
- looking for partition with 'bootonce' attribute alone (without 'bootme'
  attribute), removing it and logging that we successfully booted from this
  partition.
- looking for partitions with 'bootfailed' attribute, removing it and
  logging that we failed to boot from this partition.

Reviewed by:	arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
Obtained from:	Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after:	2 weeks
2010-09-24 19:53:55 +00:00
Hiroki Sato
d3a8a8b9fa Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces.
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively.  When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first.  If it is found, it reads and installs it as
a policy table.  If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.

When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.

The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.

Discussed with:	ume and bz
2010-09-13 19:55:40 +00:00
Hiroki Sato
95f15c1589 Localize $_punct_c in get_if_var() and whitespace clean-ups.
Based on:	changes in r206408 by dougb
2010-09-13 19:53:54 +00:00
Hiroki Sato
fa3b84643a - Check some specific IFs first in ipv6_autoconfif().
- $ipv6_enable supports YES|TRUE|ON|1 as in checkyesno().

Based on:	changes in r206408 by dougb
2010-09-13 19:53:22 +00:00
Hiroki Sato
abe3ac576a Add $ipv6_privacy to support net.inet6.ip6.use_tempaddr. Note that this
will be replaced with a per-IF version later.

Based on:	changes in r206408 by dougb
2010-09-13 19:52:46 +00:00
Hiroki Sato
e5481092bb Fix $ipv6_network_interfaces and set it as AUTO by default.
Based on:	changes in r206408 by dougb
2010-09-13 19:52:04 +00:00
Hiroki Sato
c5ad71aff5 Revert changes in r206408.
Discussed with:	dougb, core.5, and core.6
2010-09-13 19:51:15 +00:00
Bernhard Schmidt
b6c44f6440 Create the var/run/wpa_supplicant directory where the wpa_supplicant
RC script wants to save a pidfile for each interface.

MFC after:	2 weeks
2010-09-10 08:27:02 +00:00
Daichi GOTO
6f0bcd4110 Avoid to try to remove suj journal file (.sujournal) and conventional
snapshot directory (.snap) from cleartmp rc.d script.
2010-09-05 05:44:40 +00:00
Maxim Konovalov
e62f433662 o Correct typo.
Submitted by:	Bojidara Marinchovska via -stable
MFC after:	1 week
2010-08-25 08:37:18 +00:00
Alexander Leidinger
3dd9aad270 - Change the threshold from 'running next scrub the <value+1>th day after the
last one' to 'running next scrub the <value>th day after the last one'.
- Improve wording.

Requested by:	jhell <jhell@DataIX.net>
MFC after:	1 week
2010-08-25 08:09:42 +00:00
Doug Barton
15539a8a80 Fix silly typo on my part (s/quotas_enable/quota_enable/)
Submitted by:	ed
2010-08-14 22:28:07 +00:00
Doug Barton
a7112b557f Give people some warning before removing enable_quotas 2010-08-14 18:58:05 +00:00
Jung-uk Kim
4a2637c486 Consistently use full pathnames for external commands. 2010-08-13 21:23:13 +00:00
Jung-uk Kim
ca988da3ca Do not fork a subshell unnecessarily. 2010-08-13 21:04:43 +00:00
Jung-uk Kim
ed82feee0c Enforce ACPI timer as the timecounter hardware before we change sleep state
unless it is the current timer.  When we have resumed successfully, restore
the previous timecounter hardware if it was changed earlier.  Only the ACPI
timer is guaranteed to increase monotonically between S-state changes.
2010-08-13 20:43:19 +00:00
Oliver Fromme
686fdc1fc1 Connect the new script 490.status-pkg-changes (see r210863)
to the build, so it gets actually installed.

Approved by:	des (mentor)
MFC after:	17 days
2010-08-10 12:58:44 +00:00
Gabor Kovesdan
c2f40dcd3f - Fixes to the chkportsum script to handle better some special cases,
like spaces in filename

Submitted by:	Alex Kozlov <spam@rm-rf.kiev.ua>
Approved by:	delphij (mentor)
2010-08-10 11:15:17 +00:00
Oliver Fromme
6ece019fcf Add a daily script to the periodic framework that reports
changes to the package database, i.e. any packages that
have been added, updated or deleted in the past 24 hours.
The format is intentionally simple and concise.

That information is particularly useful on servers that
are maintained by multiple administrators.  When someone
adds, updates or deletes a package, the others will see
it in the daily periodic output.

This script is disabled by default.

PR:		conf/113913
Submitted by:	olli
Approved by:	des (mentor)
MFC after:	3 weeks
2010-08-05 15:53:33 +00:00
Hajimu UMEMOTO
b3cae08659 /etc/rc.d/network_ipv6 was deprecated.
Reported by:	Alex Kozlov <spam__at__rm-rf.kiev.ua>
2010-08-05 15:11:03 +00:00
Hajimu UMEMOTO
478e8b2dc1 /etc/rc.d/ip6fw was deprecated.
Reported by:	Alex Kozlov <spam__at__rm-rf.kiev.ua>
MFC after:	3 days
2010-08-05 15:07:28 +00:00
Jilles Tjoelker
32c50473a8 Allow starting /etc/rc.d/ipmon if ipnat is enabled but ipfilter is not
(in /etc/rc.conf).

This fixes an apparent confusion between test(1) and sh(1) syntax for
AND/OR.

PR:		conf/149036
Submitted by:	pluknet
MFC after:	1 week
2010-08-01 15:41:00 +00:00
Shteryana Shopova
ffc9a38171 Add a (disabled) configuration line to enable the snmp_wlan(3) module.
Sponsored by:	The FreeBSD Foundation
2010-07-26 16:20:52 +00:00
Ed Schouten
ffd1746d03 Upgrade our Clang in base to r108428.
This commit merges the latest LLVM sources from the vendor space. It
also updates the build glue to match the new sources. Clang's version
number is changed to match LLVM's, which means /usr/include/clang/2.0
has been renamed to /usr/include/clang/2.8.

Obtained from:	projects/clangbsd
2010-07-20 17:16:57 +00:00
Gabor Kovesdan
d8456aa881 - Add a periodic script, which can be used to find installed ports' files with
mismatched checksum

PR:		conf/124641
Submitted by:	Alex Kozlov <spam@rm-rf.kiev.ua>
Approved by:	delphij (mentor)
2010-07-19 20:19:14 +00:00
Benedict Reuschling
a32e2a86af Fix spelling of "weirdo" in /etc/gettytab comment.
PR:             docs/148500
Submitted by:   Warren Block (wblock at wonkity dot com)
Approved by:    ed@
MFC after:      1 week
2010-07-12 19:09:18 +00:00
Pawel Jakub Dawidek
aac0676809 Use spaces, not tabs. 2010-06-28 08:05:30 +00:00
Warner Losh
4bbc5bd8e0 Bring in Kris Moore's pc-sysinstall shell script from PC-BSD. This
shell script is the back end logic necessary for an installer.  It
contains both query routines to allow a front-end installer to present
reasonable choices to the user and also action routines which allow
the front end installer to put a FreeBSD distribution onto a disk.  It
supports installing onto the usual suspects, as well as advanced
features like Mirroring, ZFS, Encryprion and GPT labels.

While this is only the back-end of the installer, it can do unattended
scripted installations.  In PC-BSD's world view, all installations are
scripted and all the front-end does is write the script.  As such, it
is useful in its own right.

This has been extensively tested over the past several releases of
PC-BSD.  However, differences between that environment and FreeBSD
suggest there will be a period of shake-out while those differences
are discovered and corrected.

A text-based front-end is in the works.  For the GUI-based front-end,
you can use the PC-BSD distribution.

Kris' BSDcan paper on pc-sysinstall is linked off his talk on the
BSDcan site:
	http://www.bsdcan.org/2010/schedule/events/173.en.html

The man page is written by Josh Paetzel, and I wrote the Makefiles for
the FreeBSD integration.  Kris wrote the rest.

This represents version r7010 in the PC-BSD repo.
http://svn.pcbsd.org/pcbsd/current/pc-sysinstall

Submitted by:	kris@
Sponsored by:	iX Systems
2010-06-24 22:21:47 +00:00
Brian Somers
5fa77f4fe4 Remove vestiges of 'slip'.
PR:		145648
Submitted by:	alexbestms at wwu dot de and spam at rm-rf dot kiev dot ua
MFC after:	1 week
2010-06-19 09:21:34 +00:00
Doug Barton
998ef62e74 Add the AAAA address for i.root-servers.net 2010-06-18 08:11:52 +00:00
Alexander Leidinger
92dee8c3a0 - add the zfs scrub script
- move the zfs status script into the MK_ZFS conditional to respect
  WITHOUT_ZFS

Noticed by:	Andrzej Tobola <ato@iem.pw.edu.pl>
2010-06-17 12:25:47 +00:00
Andriy Gapon
ac79617984 device.hints: do install when WITHOUT_BOOT is set
Discussed with:	imp
MFC after:	2 weeks
2010-06-16 07:52:44 +00:00
Alexander Leidinger
63669de232 Add a periodic zfs scrub script.
Features:
 - configurable amount of days between scrubs (default value or per pool)
 - do not scrub directly after pool creation (respects the configured
   number of days between scrubs)
 - do not scrub if a scrub is in progress
 - tells how to see the status of the scrub
 - tells how many days since the last scrub if it skips the scrubbing
 - warns if a non-existent pool is specified explicitely
   (default: no pools specified -> all currently imported pools are
   handled)
 - runs late in the periodic run to not slow down the other periodic daily
   scripts

Discussed on:	fs@
2010-06-15 08:58:16 +00:00
Warner Losh
f62a0233c8 Merge from tbemd, with minor tweaks:
Search from most specific ($MACHINE) to least specific
($MACHINE_CPUARCH) when looking for the tty file to use.  Also add an
.error case if none exist.
2010-06-13 16:35:20 +00:00
Roman Divacky
6513cfc82f Hook clang into the build on i386/amd64/powerpc.
Approved by:	ed (mentor)
2010-06-09 19:57:20 +00:00
Jung-uk Kim
07e547fe26 Add a new build option, MAN_UTILS. This option lets you control building
utilities and related support files for manual pages, which were previously
controlled by MAN.  For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS.  This patch
is slightly improved by me from:

PR:		misc/145212
2010-05-19 23:56:26 +00:00
Doug Barton
2822c33f8c This change does the following for the scripts that run up through
FILESYSTEMS (the default early_late_divider):
1. Move sysctl to run first
2. Move as many BEFOREs to REQUIREs as possible.
3. Minor effect, move hostid_save from right before mdconfig to right
   after.

A lot of the early scripts make use of sysctl one way or another so
running this first makes a lot of sense given that system-critical
values are often placed in sysctl.conf.

My original purpose for working on this was that while doing some
debugging on other stuff I noticed that the order of execution was
different in the first pass through the early scripts and the second.
In practice that doesn't matter because the scripts are not executed the
second time. However this _can_ result in problems if the difference in
the rcorder moves a script from the late section to the early section in
the second pass (which would mean the script would not get executed).
So, I wanted to make the order of execution of the scripts in the early
section more deterministic.

In the course of debugging the ordering problems I noticed that moving
the BEFOREs to REQUIREs prevented the changes in order from the first
pass to the second pass without having to make any substantial changes.
(Of course it's no secret that I think BEFORE should be avoided as much
as possible, but this is a good example of why.)

Reviewed by:	silence on freebsd-rc@
MFC after:	8.1-RELEASE
2010-05-19 19:03:19 +00:00
John Baldwin
4d84f49da4 Prevent unloading a kld for a driver that has subinterfaces (vlan and/or
wlan interfaces) from being automatically reloaded via devd shutdown
event handlers.
- Revert part of my previous changes to call ifn_stop on subinterfaces
  when an interface is detached.  It is better to destroy the interfaces
  first so that an 'ifconfig foo0.blah down' doesn't result in ifconfig
  auto-loading if_foo.ko.  The ifconfig command will not be invoked if
  foo0.blah is gone when ifn_stop() is called.  Furthermore, it is not
  necessary to explicitly invoke ifn_stop() after the subinterface is
  destroyed as devd will already do that.
- Pass -n to ifconfig when destroying interfaces so that destroying a
  cloned interface does not kldload any drivers.

Reviewed by:	dougb
MFC after:	4 days
2010-05-17 19:51:34 +00:00
Jilles Tjoelker
18bd63b7c5 Change the commented msgs examples in profile/csh.login from -f to -q.
Starting something that wants input on login seems strange and can be
dangerous. In some configurations, causing output can be bad, but it is not
as dangerous.

I do not expect this msgs invocation to be uncommented often.

PR:		conf/96015
MFC after:	4 days
2010-05-15 17:49:56 +00:00
Doug Barton
2557f5bf0a Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
David E. O'Brien
680e78b305 Non-GCC gcc compatible compilers may provide the same multimedia intrinsic
headers as GCC, but of their own implementation.  So put the GCC ones into
their own header "namespace".

Requested by:	ed
2010-05-12 19:59:32 +00:00
Martin Matuska
81ad83880d Import of liblzma, xz, xzdec, lzmainfo from vendor branch
Add support for xz and lzma to lesspipe.sh (xzless, lzless)
Bump __FreeBSD_version

Approved by:	delphij (mentor)
MFC after:	2 weeks
2010-05-10 06:59:50 +00:00
Doug Barton
fd73ccb143 Make address assignment via ipv6_prefix_IF work again 2010-05-04 01:46:58 +00:00
Doug Barton
a16334d031 In the case where named_chroot_autoupdate is NOT set, but
named_chrootdir IS set, named-checkconf fails because it
cannot find the conf file. Fix this by making checkconf a
variable that includes "-t $named_chrootdir" as needed.
Notice of the bug and suggested direction for the fix from [1].

Using required_files for named.conf is overkill ever since
I added the named-checkconf call, so rather than update the
logic to handle the case described above, remove it. This
also handles the case where named_chroot_autoupdate IS set
but the symlink doesn't exist yet.

PR:		conf/145904
Submitted by:	J R Matthews
2010-04-28 22:29:17 +00:00
Hajimu UMEMOTO
b13cc627c7 Better handling of ipv6_default_interface using
net.inet6.ip6.use_defaultzone=1.  Now, it works IPv6 link-local
unicast addresses as well as IPv6 link-local multicast addresses.

MFC after:	1 week
2010-04-26 15:31:58 +00:00
Andrew Thompson
3acd904d85 Change usb devd events from fake attach to a notify. The ugen device is not a
proper device_t so it faked the devctl event to appear like one, this is now a
notify which allows more information to be passed.

We notify for both the device attach/detach and for each usb interface. A devd
rule can now match on the interface properties, including composite devices
which may have a uvideo interface and also usound and possibly uhid too.

An example to match a umass device with a scsi subclass and BBB protocol would be

notify 100 {
	match "system"          "USB";
	match "subsystem"       "INTERFACE";
	match "type"            "ATTACH";
	match "intclass"        "0x08";
	match "intsubclass"     "0x06";
	match "intprotocol"     "0x50";
	action ...
};

The old attach devctl event has been retained for the moment to make merging to
8.1 easier. This was never compatible with 7.x or earlier due to the ugen regex
change needed.

Reviewed by:	warner
MFC after:	1 week
2010-04-21 21:51:14 +00:00