Commit Graph

47 Commits

Author SHA1 Message Date
Mike Smith
2a50a6d730 Add PnP probe methods to some common AT hardware drivers. In each case,
the PnP probe is merely a stub as we make assumptions about some of this
hardware before we have probed it.

Since these devices (with the exception of the speaker) are 'standard',
suppress output in the !bootverbose case to clean up the probe messages
somewhat.
2000-06-23 07:44:33 +00:00
Poul-Henning Kamp
e4961fbf07 Don't use struct buf for random small temporary buffers. 2000-05-05 09:05:39 +00:00
Peter Wemm
e27c1addaa Remove #if NFOO > 0 (it's not required in most cases) and also where it
isn't used as a result, remove #include "foo.h".  Many of these drivers
still use NFOO for softc struct sizing etc however.
2000-01-29 16:00:34 +00:00
Poul-Henning Kamp
5b664c7c13 Move isfoo() and friends to the newly created sys/ctype.h.
Urged by:       bde
1999-11-03 17:54:26 +00:00
Archie Cobbs
44b4dd855d Consolidate some of the various ctype(3) macros in one location. 1999-11-02 22:50:34 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Bruce Evans
d918320517 Use devtoname() to print dev_t's instead of casting them to long or u_long
for misprinting in %lx format.
1999-08-23 20:35:21 +00:00
Bill Fumerola
b8e49f681b Welcome devtoname(), to most likely be used when printing information
about a dev_t.

printf("%x", dev) now becomes printf("%s", devtoname(dev)) because
printing actual information about the device is much more useful then
printing a pointer to an address that would never help the developer debug.

Submitted by:	phk, bde
1999-08-17 20:25:50 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Bruce Evans
00671271c3 Fixed printf format errors. Only one left in LINT on i386's. 1998-08-24 02:28:16 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Bruce Evans
e31abede1f Don't depend on "implicit int" or bloat the data section in the
declaration of xxx_devsw_installed.
1998-02-20 13:46:58 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Poul-Henning Kamp
ab3f746966 In all such uses of struct buf: 's/b_un.b_addr/b_data/g' 1997-12-02 21:07:20 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
9275c7cc3e Use macros from timmerreg.h instead of private ones.
Use global timer_freq instead of private TIMER_CLK.

Removed unused #includes.

Fixed some comments.
1996-10-25 14:00:47 +00:00
Peter Wemm
3bd9f6db7a Unconditionally null-terminate string read into spkr driver.
Submitted by: Ikuo Nakagawa <ikuo@isl.intec.co.jp>, PR#1488, but using
	Bruce Evans <bde@zeta.org.au>'s fix.
1996-08-24 03:24:39 +00:00
Joerg Wunsch
f4de22acc7 Correct the timer2 acquiration and release, it must happen at splclock.
Also slightly reformatted so that it meets at least partially style(9),
and makes navigating through the functions easier.
1996-07-20 18:48:54 +00:00
Bruce Evans
2412bc33ad Fixed name of /dev/speaker (it's not spkr). 1996-03-27 19:07:33 +00:00
Bruce Evans
0dfe10a65c Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.
1995-12-15 00:54:32 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Julian Elischer
7146c13e43 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
David Greenman
4590fd3a2a Fixed init functions argument type - caddr_t -> void *. Fixed a couple of
compiler warnings.
1995-09-09 18:10:37 +00:00
Bruce Evans
6003967057 Fix benign type mismatches in devsw functions. 82 out of 299 devsw
functions were wrong.
1995-09-08 11:09:15 +00:00
Julian Elischer
8af5d536ff devfs changes..
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
1995-09-03 05:43:50 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
David Greenman
9714de6a38 Check for 0 before dividing by it. Patch from Paul Traina, modified
slightly by me.
1995-05-05 06:15:11 +00:00
Bruce Evans
b5e8ce9f12 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'.  Fix all the bugs found.  There were no serious
ones.
1995-03-16 18:17:34 +00:00
Andrey A. Chernov
3bdc031e93 Fix hanging while playing very short notes. 1995-02-03 10:19:38 +00:00
Andrey A. Chernov
0a97fb590a Fix range checking bug, pointed by peter@haywire.dialix.com 1994-10-14 16:37:58 +00:00
Garrett Wollman
f540b1065a Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
Søren Schmidt
bc4ff6e376 Change timer usage to use new functions in clock.c 1994-04-21 14:21:50 +00:00
Andrey A. Chernov
424e2d04fc Fix error with tsleep loop 1994-01-25 23:04:27 +00:00
Andrey A. Chernov
b4afc64b0b wmesg was too long (>7), fixed 1993-11-29 19:26:32 +00:00
Andrey A. Chernov
1e064bd4be timeout+sleep changed to tsleep 1993-11-15 01:33:11 +00:00
Andrey A. Chernov
e614aa8a3b Fixed minor bug in M[LSN] interpretation, added octave-tracking.
Added the slur-mark feature.
Name of ioctl's include sys/spkr.h changed to machine/speaker.h
1993-11-09 02:32:30 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
David Greenman
269312019a * Applied fixes from Bruce Evans to fix COW bugs, >1MB kernel loading,
profiling, and various protection checks that cause security holes
  and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
  - included from cpufunc.h in via systm.h. This change
  improves performance in many parts of the kernel - up to 5% in the
  networking layer alone. Note that this requires systm.h to be included
  in any file that uses these functions otherwise it won't be able to
  find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
1993-07-27 10:52:31 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00