possible to end up in the interrupt handler again while processing the
previous RX interrupt in ifp->if_input() because the MD interrupt code
disables the delivery of the respective interrupt until all associated
handlers were called (in the INTR_FILTER case the MI code supposedly
does the same). Toggling the NIC interrupt enable bit in these handlers
still is necessary though as some chips (f.e. the VMware emulated one)
require this to be done in order to keep issuing interrupts.
MFC after: 1 month
implemented with macros. This patch improves code readability. Reasoning
behind vidd_* is a sort of "video discipline".
List of macros is supposed to be complete--all methods of video_switch
ought to have their respective macros from now on.
Functionally, this code should be no-op. My intention is to leave current
behaviour of touched code as is.
No objections: rwatson
Silence on: freebsd-current@
Approved by: cognet
implemented with macros. This patch improves code readability. Reasoning
behind kbdd_* is a "keyboard discipline".
List of macros is supposed to be complete--all methods of keyboard_switch
should have their respective macros from now on.
Functionally, this code should be no-op. My intention is to leave current
behaviour of code as is.
Glanced at by: rwatson
Reviewed by: emax, marcel
Approved by: cognet
machine-independent support for superpages. (The earlier part was
the rewrite of the physical memory allocator.) The remainder of the
code required for superpages support is machine-dependent and will
be added to the various pmap implementations at a later date.
Initially, I am only supporting one large page size per architecture.
Moreover, I am only enabling the reservation system on amd64. (In
an emergency, it can be disabled by setting VM_NRESERVLEVELS to 0
in amd64/include/vmparam.h or your kernel configuration file.)
argument. It allows ppp, mpd or any other node consumer to request
connection to specified access concentrator.
Proposed by: Alexander A. Burylov <burylov@mail.ru>
Without it, code has two problems:
- behaviour of the old and new [l]stat are different with regard of
the /compat/linux
- directly accessing the userspace data from the kernel asks for
the panics.
Reported and tested by: Peter Holm
Reviewed by: rdivacky
MFC after: 3 days
the inode, do the rollback in case the allocation failed (due to
insufficient free space or quota limits). But, the code does leaves the
buffers corresponding to the inoirect blocks on the vnode bufobj list.
This causes several assertion failures (for instance, "ffs_truncate3"
in ffs_truncate()) to fail, and could result in the indirect block
aliasing problem, like writing the context of such blocks to random
disk location.
Remove the buffers from the bufobj properly.
Reported and tested by: Peter Holm
Reviewed by: tegge
MFC after: 3 weeks
so that the results end up in the DDB output stream rather than the
console output stream.
This should likely also be done for the vprint() function it calls.
MFC after: 3 months
This option just adds complexity and the new implementation no longer
will support it, so axing it now that it is unused is probabilly the
better idea.
FreeBSD version is bumped in order to reflect the KPI breakage introduced
by this patch.
In the ports tree, kris found that only old OSKit code uses it, but as
it is thought to work only on 2.x kernels serie, version bumping will
solve any problem.
with the interlock), owner of the lock should be only curthread or at
least, for its limited usage, NULL which identifies LK_KERNPROC.
The thread "extra argument" for the lockmgr interface is going to be
removed in the near future, but for the moment, just let kernel run for
some days with this check on in order to find potential deadlocking
places around the kernel and fix them.
p_candebug() will return EAGAIN which, if the other process never
leaves execve(), will result in the sysctl spinning and never returning
to userspace. Processes should always eventually leave execve(), but
spinning in kernel while we wait is bad for countless reasons, and
particularly harmful if execve() itself is deadlocked.
Possibly we should return another error, or return a marker indicating
the thread is in execve() so it can be reported that way in userspace.
Reported by: kris
equivalent with this and so operate the switch.
That call is the only one remaining LK_EXCLUPGRADE consumer and removing
it will prepare the ground for LK_EXCLUPGRADE axing and further
lockmgr improvements.
Discussed with: jeff, ups
Recycle the vm object's "pg_color" field to represent the color of the
first virtual page address at which the object is mapped instead of the
color of the object's first physical page. Since an object may not be
mapped, introduce a flag "OBJ_COLORED" that indicates whether "pg_color"
is valid.
mounted FS' problems. These are more along the lines of 'avoiding an
avoidable panic' than a complete solution to removable devices. We
now close the barn door after the horse has gotten lose and has been
hit by a truck, as it were. The barn no longer catches fire in this
case, but the horse is still dead :-).
The vfs_bio.c fix causes us not to put a failed write back into the
dirty pool if the error returned was ENXIO. In that case, the buffer
is treated like any other clean buffer that's being retured. ENXIO
means the device isn't there anymore and will never be there again in
the future, so retrying is futile.
The vfs_mount.c fix treats 'ENXIO' as success for unmounting a file
system. If the device is gone, retrying later won't help and we'll
never be able to unmount the device.
These two are part of a larger patch set submitted by the author. The
other patches will be forth coming. I added comments to these two
patches.
Submitted by: Henrik Gulbrandsen
Reviewed by: phk@
PR: usb/46176 (partial)
functions. It is easily triggered by running routed, and, I expect, by
running any other daemon that uses routing sockets.
Reviewed by: net@
MFC after: 1 week
- Use the correct offsets when copying out the results of PCIOCGETCONF_OLD.
This happened to not affect the 64-bit architectures because there the
addition of pc_domain to struct pcisel didn't change the overall size of
struct pci_conf. [1]
- Always copy the name and unit information to conf_old so it's also part
of the output once this information is cached in dinfo.
- Use the correct type for flags in struct pci_match_conf_old. This
change is more or less cosmetic though.
Reported and tested by: bde [1]
Reviewed by: imp
MFC after: 3 days
Committed from: 24C3
If a mouse has both a wheel and a Z direction we report both.
XXX Due to tradition the wheel is reported as the Z direction (and the Z
direction as W).
Now Apple's Mighty Mouse is fully supported, except the X11 mouse driver
doesn't know what to do with the new coordinate.
MFC after: 3 months
Approved by: njl (mentor), imp
dump using mechanically generated/extracted debugging output rather than
a simple memory dump. Current sources of debugging output are:
- DDB output capture buffer, if there is captured output to save
- Kernel message buffer
- Kernel configuration, if included in kernel
- Kernel version string
- Panic message
Textdumps are stored in swap/dump partitions as with regular dumps, but
are laid out as ustar files in order to allow multiple parts to be stored
as a stream of sequentially written blocks. Blocks are written out in
reverse order, as the size of a textdump isn't known a priori. As with
regular dumps, they will be extracted using savecore(8).
One new DDB(4) command is added, "textdump", which accepts "set",
"unset", and "status" arguments. By default, normal kernel dumps are
generated unless "textdump set" is run in order to schedule a textdump.
It can be canceled using "textdump unset" to restore generation of a
normal kernel dump.
Several sysctls exist to configure aspects of textdumps;
debug.ddb.textdump.pending can be set to check whether a textdump is
pending, or set/unset in order to control whether the next kernel dump
will be a textdump from userspace.
While textdumps don't have to be generated as a result of a DDB script
run automatically as part of a kernel panic, this is a particular useful
way to use them, as instead of generating a complete memory dump, a
simple transcript of an automated DDB session can be captured using the
DDB output capture and textdump facilities. This can be used to
generate quite brief kernel bug reports rich in debugging information
but not dependent on kernel symbol tables or precisely synchronized
source code. Most textdumps I generate are less than 100k including
the full message buffer. Using textdumps with an interactive debugging
session is also useful, with capture being enabled/disabled in order to
record some but not all of the DDB session.
MFC after: 3 months
to identify textdumps in the swap/dump partition. While textdumps
aren't really an architecture, they are architecture-neutral and so
don't really correspond to any existing architecture.
Define a version number for textdumps, KERNELDUMP_TEXT_VERSION, of 1.
MFC after: 3 months
define a set of named scripts. Each script consists of a list of DDB
commands separated by ";"s that will be executed verbatim. No higher
level language constructs, such as branching, are provided for:
scripts are executed by sequentially injecting commands into the DDB
input buffer.
Four new commands are present in DDB: "run" to run a specific script,
"script" to define or print a script, "scripts" to list currently
defined scripts, and "unscript" to delete a script, modeled on shell
alias commands. Scripts may also be manipulated using sysctls in the
debug.ddb.scripting MIB space, although users will prefer to use the
soon-to-be-added ddb(8) tool for usability reasons.
Scripts with certain names are automatically executed on various DDB
events, such as entering the debugger via a panic, a witness error,
watchdog, breakpoint, sysctl, serial break, etc, allowing customized
handling.
MFC after: 3 months
(dummynet), ipsec_filter() would return the empty error code and the ipsec code
would continue to forward/deference the null mbuf.
Found by: m0n0wall
Reviewed by: bz
MFC after: 3 days
captured to a memory buffer for later inspection using sysctl(8), or in the
future, to a textdump.
A new DDB command, "capture", is added, which accepts arguments "on", "off",
"reset", and "status".
A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to
resize the capture buffer and extract buffer contents.
MFC after: 3 months
kern.console format as is. Thus, no difference in output format should
appear after this commit.
Reviewed by: cognet@ (mentor)
Approved by: cognet@ (mentor)
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
fget() call, that is sleeping point, and possibly dropping Giant.
The snp_target == NULL implies the snp_tty == NULL. Remove the code
that is put under snp_target == NULL and snp_tty != NULL clause.
In snpclose(), do the snp_detach() before scheduling the snp device
destruction. Otherwise, after the return from snpclose(), the snp
device is already removed from the snp_list, but tty is still in
snooped state. Any attempt to do i/o on such tty cause panic because
ttytosnp() returns NULL.
Tested by: Peter Holm
MFC after: 1 week
o BSD disklabels have relative offsets. Even for the BSD in MBR slice
setup, except when the mbroffset ioctl is supported. Since we don't
support that ioctl, bsdlabel(8) expects relative offsets. So, when
reading an existing disklabel, correct for disklabels that mistakenly
have the mbroffset offsets.
o Don't take the geometry seriously, because it's untrustworthy. We do
expect the numbers to be within range. This means that the secperunit
field will not be computed from secpercyl and ncyls, but simply is
the mediasize in sectors.
o Don't enforce partitions to be aligned to track boundaries. The
default label, constructed by bsdlabel(8), puts partition a at offset
BBSIZE bytes, which commonly means sector 16.
