This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
Peter reported that his dmesg was getting cluttered with
nfsrv_cache_session: no session
messages when he rebooted his NFS server and they did not seem useful.
He was correct, in that these messages are "normal" and expected when
NFSv4.1 or NFSv4.2 are mounted and the server is rebooted.
This patch silences the printf() during the grace period after a reboot.
It also adds the client IP address to the printf(), so that the message
is more useful if/when it occurs. If this happens outside of the
server's grace period, it does indicate something is not working correctly.
Instead of adding yet another nd_XXX argument, the arguments for
nfsrv_cache_session() were simplified to take a "struct nfsrv_descript *".
Reported by: pen@lysator.liu.se
MFC after: 2 weeks
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
r356084 added error strings for NFSv4.1 and NFSv4.2, with the first
character capitalized. Since the other error strings were not capitalized
and these strings would usually be imbedded in an error, I decided to
make the first characters lower cased.
No real effect but more consistent.
nfsv4_errstr.h only had strings for NFSv4.0 errors. This patch adds the
errors for NFSv4.1 and NFSv4.2. At this time, this file is not used by
any sources in the tree, so the change is not significant.
I do plan on using nfsv4_errstr.h in a future patch to mount_nfs.c.
Since I am doing this patch so that "minor version mismatch" will be
recognized, I made that string less abbreviated.
This patch adds support for NFSv4.2 (RFC-7862) and Extended Attributes
(RFC-8276) to the NFS client and server.
NFSv4.2 is comprised of several optional features that can be supported
in addition to NFSv4.1. This patch adds the following optional features:
- posix_fadvise(POSIX_FADV_WILLNEED/POSIX_FADV_DONTNEED)
- posix_fallocate()
- intra server file range copying via the copy_file_range(2) syscall
--> Avoiding data tranfer over the wire to/from the NFS client.
- lseek(SEEK_DATA/SEEK_HOLE)
- Extended attribute syscalls for "user" namespace attributes as defined
by RFC-8276.
Although this patch is fairly large, it should not affect support for
the other versions of NFS. However it does add two new sysctls that allow
a sysadmin to limit which minor versions of NFSv4 a server supports, allowing
a sysadmin to disable NFSv4.2.
Unfortunately, when the NFS stats structure was last revised, it was assumed
that there would be no additional operations added beyond what was
specified in RFC-7862. However RFC-8276 did add additional operations,
forcing the NFS stats structure to revised again. It now has extra unused
entries in all arrays, so that future extensions to NFSv4.2 can be
accomodated without revising this structure again.
A future commit will update nfsstat(1) to report counts for the new NFSv4.2
specific operations/procedures.
This patch affects the internal interface between the nfscommon, nfscl and
nfsd modules and, as such, they all must be upgraded simultaneously.
I will do a version bump (although arguably not needed), due to this.
This code has survived a "make universe" but has not been built with a
recent GCC. If you encounter build problems, please email me.
Relnotes: yes
When an NFSv4 server replies NFSERR_MINORVERSMISMATCH, it does not generate
a status result for the first operation in the compound. Without this
patch, this will result in a bogus EBADXDR error return.
Returning EBADXDR is relatively harmless, but a correct reply of
NFSERR_MINORVERSMISMATCH is needed by the pNFS client to select the correct
minor version to use for a File Layout DS now that there can be NFSv4.2
DS servers.
mount_nfs.c still needs to be fixed for this, although how the mount fails
is only useful to help sysadmins isolate why a mount fails.
Found during testing of the NFSv4.2 client and server.
MFC after: 2 weeks
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
Since r355472 added code which clears the XATTRSUPPORT bit for non-NFSv4.2
mounts, it is now safe to set it.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
This commit completes updates to nfsproto.h required by the NFSv4.2.
This patch adds code to macros to clear attribute bits not supported
by NFSv4.2. For now, these bits are never set anyhow, but this prepares
the code for the addition of NFSv4.2 support in a future commit.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
A crash was reported where the nr_client field was NULL during an upcall
to the nfsuserd daemon. Since nr_client == NULL only occurs when the
nfsuserd daemon is being shut down, it appeared to be caused by a race
between doing an upcall and the daemon shutting down.
By inspection two races were identified:
1 - The nfsrv_nfsuserd variable is used to indicate whether or not the
daemon is running. However it did not handle the intermediate phase
where the daemon is starting or stopping.
This was fixed by making nfsrv_nfsuserd tri-state and having the
functions that are called during start/stop to obey the intermediate
state.
2 - nfsrv_nfsuserd was checked to see that the daemon was running at
the beginning of an upcall, but nothing prevented the daemon from
being shut down while an upcall was still in progress.
This race probably caused the crash.
The patch fixes this by adding a count of upcalls in progress and
having the shut down function delay until this count goes to zero
before getting rid of nr_client and related data used by an upcall.
Tested by: avg (Panzura QA)
Reported by: avg
Reviewed by: avg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22377
The pNFS server currently reports SpaceUsed (va_bytes) for the metadata
file. This in not correct, since the metadata file is always empty and,
as such, va_bytes is just the allocation for the empty file.
This patch adds va_bytes to the list of attributes acquired from the
DS for a file, so that it includes the allocated data size and is updated
when the file is written.
For files created on a pNFS server before this patch is applied, the
va_bytes value is estimated by rounding va_size up to a multiple of
BLKDEV_IOSIZE. Once the file is written after this patch has been
applied to the metadata server, the va_bytes returned for the file
will be correct.
This patch only affects a pNFS metadata server.
Found during testing of the NFSv4.2 pNFS server for the Allocate operation.
(Not yet in head/current.)
MFC after: 2 weeks
Make the nfsclient always call vnode_pager_setsize() with the vnode
exclusively locked. This ensures that page fault always can find the
backing page if the object size check succeeded. Set VV_VMSIZEVNLOCK
flag on NFS nodes.
The main offender breaking the interface in nfsclient is
nfs_loadattrcache(), which is used whenever server responded with
updated attributes, which can happen on non-changing operations as
well. Also, iod threads only have buffers locked (and even that is
LK_KERNPROC), but they still may call nfs_loadattrcache() on RPC
response.
Instead of immediately calling vnode_pager_setsize() if server
response indicated changed file size, but the vnode is not exclusively
locked, set a new node flag NVNSETSZSKIP. When the vnode exclusively
locked, or when we can temporary upgrade the lock to exclusive, call
vnode_pager_setsize(), by providing the nfsclient VOP_LOCK() implementation.
Tested by: pho
Discussed with: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
To be consistent with replacing the mtx_lock()/mtx_unlock() calls on
the NFS node mutex (n_mtx) and ncl_iod_mutex, this patch replaces
all mtx_assert() calls on these mutexes with macros as well.
This will simplify changing these locks to sx locks in a future commit.
However, this change may be delayed indefinitely, since it appears there
is a deadlock when vnode_pager_setsize() is called to shrink the size
and the NFS node lock is held.
There is no semantic change as a result of this commit.
Suggested by: kib
MFC after: 1 week
Since the NFS node mutex needs to change to an sx lock so it can be held when
vnode_pager_setsize() is called and the iod lock is held when the NFS node lock
is acquired, the iod mutex will need to be changed to an sx lock as well.
To simply the future commit that changes both the NFS node lock and iod lock
to sx locks, this commit replaces all mtx_lock()/mtx_unlock() calls on the
iod lock with macros.
There is no semantic change as a result of this commit.
I don't know when the future commit will happen and be MFC'd, so I have
set the MFC on this commit to one week so that it can be MFC'd at the same
time.
Suggested by: kib
MFC after: 1 week
For a long time, some places in the NFS code have locked/unlocked the
NFS node lock with the macros NFSLOCKNODE()/NFSUNLOCKNODE() whereas
others have simply used mtx_lock()/mtx_unlock().
Since the NFS node mutex needs to change to an sx lock so it can be held when
vnode_pager_setsize() is called, replace all occurrences of mtx_lock/mtx_unlock
with the macros to simply making the change to an sx lock in future commit.
There is no semantic change as a result of this commit.
I am not sure if the change to an sx lock will be MFC'd soon, so I put
an MFC of 1 week on this commit so that it could be MFC'd with that commit.
Suggested by: kib
MFC after: 1 week
The "nd" argument for nfsrv_checkdsattr() is no longer used by the function.
This patch deletes it. This allows subsequent patches to delete the "nd"
argument from nfsrv_proxyds(), since it's only use of "nd" was to pass it
to nfsrv_checkdsattr(). The same will then be true for nfsvno_getattr(),
which passes "nd" to nfsrv_proxyds().
Getting rid of the "nd" argument from nfsvno_getattr() avoids confusion
over why it might need "nd".
This patch is trivial and does not have any semantic effect.
Found by inspection while working on the NFSv4.2 server.
I do not know of an extant NFSv4.1 client that currently does a Setattr
operation for the ModeSetMasked, but it has been discussed on the linux-nfs
mailing list.
This patch adds support for doing a Setattr of ModeSetMasked, so that it
will work for any future NFSv4.1 client that chooses to do so.
Tested via a hacked FreeBSD NFSv4.1 client.
MFC after: 2 weeks
During inspection of a packet trace, I noticed that an NFSv4.0 mount
reported that it supported attributes that are only defined for NFSv4.1.
In practice, this bug appears to be benign, since NFSv4.0 clients will
not use attributes that were added for NFSv4.1.
However, this was not correct and this patch fixes the NFSv4.0 server
so that it only supports attributes defined for NFSv4.0.
It also adds a definition for NFSv4.1 attributes that can only be set,
although it is only defined as 0 for now.
This is anticipation of the addition of support for the NFSv4.1 mode+mask
attribute soon.
MFC after: 2 weeks
r340744 broke the NFSv4 client, because it replaced pfind_locked() with a
call to pfind(), since pfind() acquires the sx lock for the pid hash and
the NFSv4 already holds a mutex when it does the call.
The patch fixes the problem by recreating a pfind_any_locked() and adding the
functions pidhash_slockall() and pidhash_sunlockall to acquire/release
all of the pid hash locks.
These functions are then used by the NFSv4 client instead of acquiring
the allproc_lock and calling pfind().
Reviewed by: kib, mjg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19887
The kernel code uses UDP to do upcalls to the nfsuserd(8) daemon to get
updates to the username<->uid and groupname<->gid mappings.
A change to AF_LOCAL last year had to be reverted, since it could result
in vnode locking issues on the AF_LOCAL socket.
This patch adds INET6 support and the required #ifdef INET and INET6
to the code.
Requested by: bz
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: http://reviews.freebsd.org/D19218
r338192 reverted the changes to nfsuserd so that it could use an AF_LOCAL
socket, since it resulted in a vnode locking panic().
Post r338192 nfsuserd daemons use the old AF_INET socket for upcalls and
do not use these kernel changes.
I left them in for a while, so that nfsuserd daemons built from head sources
between r320757 (Jul. 6, 2017) and r338192 (Aug. 22, 2018) would need them
by default.
This only affects head, since the changes were never MFC'd.
I will add an UPDATING entry, since an nfsuserd daemon built from head
sources between r320757 and r338192 will not run unless the "-use-udpsock"
option is specified. (This command line option is only in the affected
revisions of the nfsuserd daemon.)
I suspect few will be affected by this, since most who run systems built
from head sources (not stable or releases) will have rebuilt their nfsuserd
daemon from sources post r338192 (Aug. 22, 2018)
This is being reverted in preparation for an update to include AF_INET6
support to the code.
of it being explicitly passed as an argument. No functional changes.
The big picture here is that I want to get rid of the 'td' argument
being passed everywhere, and this is the first piece that affects
the NFS server.
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19417
The code assumed that this would indicate a corrupted mbuf chain, but
it could simply be caused by bogus RPC message data.
This patch replaces the panic() with a printf() plus error return.
MFC after: 1 week
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
When coding the pNFS server, I added several vn_start_write() calls done
while the vnode was locked, not realizing I had introduced LORs and
possible deadlock when an exported file system on the MDS is suspended.
This patch fixes this by removing the added vn_start_write() calls and
modifying the code so that the extant vn_start_write() call before the
NFS RPC/operation is done when needed by the pNFS server.
Flags are changed so that LayoutCommit and LayoutReturn now get a
vn_start_write() done for them.
When the pNFS server is enabled, the code now also changes the flags for
Getattr, so that the vn_start_write() is done for Getattr, since it may
need to do a vn_set_extattr(). The nfs_writerpc flag array was made global
to the NFS server and renamed nfsrv_writerpc, which is consistent naming
for globals in the NFS server.
Thanks go to kib@ for reporting that doing vn_start_write() while the vnode is
locked results in a LOR.
This patch only affects the behaviour of the pNFS server.
The code in newnfs_request() retries RPCs that get a reply of NFSERR_DELAY,
but exempts certain NFSv4 operations. However, for callback RPCs, there
should not be any exemptions at this time. The code would have erroneously
exempted the CBRECALL callback, since it has the same operation number as
the CLOSE operation.
This patch fixes this by checking for a callback RPC (indicated by clp != NULL)
and not checking for exempt operations for callbacks.
This would have only affected the NFSv4 server when delegations are enabled
(they are not enabled by default) and the client replies to CBRECALL with
NFSERR_DELAY. This may never actually happen.
Spotted during code inspection.
MFC after: 2 weeks
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server. However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.
This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after: 2 weeks
Relnotes: yes
Use CLSET_TIMEOUT to set the timeout for connections to DSs instead of
specifying a timeout on each RPC. This is done so that SO_SNDTIMEO
is set on the TCP socket as well as specifying a time limit when
waiting for an RPC reply. Useful if the send queue for the TCP
connection has become constipated, due to a failed DS.
The choice of lease_duration / 4 is fairly arbitrary, but seems to work
ok, with a lower bound of 10sec.
For client connections to a DS, set the retry limit to vfs.nfsd.dsretries,
which is 2 by default.
This patch should only affect pNFS connections to DSs.
This patch requires r336542.
MFC after: 2 weeks
The ESXi NFSv4.1 client will generate warning messages when the reason for
not issuing a delegation is two. Two refers to a resource limit and I do
not see why it would be considered invalid. However it probably was not the
best choice of reason for not issuing a delegation.
This patch changes the reasons used to ones that the ESXi client doesn't
complain about. This change does not affect the FreeBSD client and does
not appear to affect behaviour of the Linux NFSv4.1 client.
RFC5661 defines these "reasons" but does not give any guidance w.r.t. which
ones are more appropriate to return to a client.
Tested by: andreas.nagy@frequentis.com
PR: 226650
MFC after: 2 weeks
When a NFSv4.1 client mount using pNFS detects a failure trying to do a
Renew (actually just a Sequence operation), the code would simply try
again and again and again every 30sec.
This would tie up the "nfscl" thread, which should also be doing other
things like Renews on other DSs and the MDS.
This patch adds code which closes down the TCP connection and marks it
defunct when Renew detects an failure to communicate with the DS, so
further Renews will not be attempted until a new working TCP connection to
the DS is established.
It also makes the call to nfscl_cancelreqs() unconditional, since
nfscl_cancelreqs() checks the NFSCLDS_SAMECONN flag and does so while holding
the lock.
This fix only applies to the NFSv4.1 client whne using pNFS and without it
the only effect would have been an "nfscl" thread busy doing Renew attempts
on an unresponsive DS.
MFC after: 2 weeks
Without this patch, the client side NFSv4.1 pNFS code erroneously did writes
and commits to both DS mirrors using the TCP connection of the first one.
For my test setup this worked, since I have both DSs running on the same
machine, but it would have failed when the DSs are on separate machines.
This patch fixes the code to use the correct TCP connection for each DS.
This patch should only affect the NFSv4.1 client when using "pnfs" mounts
to mirrored DSs.
MFC after: 2 weeks
Without this patch, the NFSv4.1 pNFS client shared a single TCP connection
for all DSs that resided on the same machine. This made disabling one of
the DSs impossible. Although unlikely, it is possible that the storage
subsystem has failed in such a way that the storage for one DS on a machine
is no longer functioning correctly, but the storage used by another DS on
the same machine is still ok. For this case, it would be nice if a system
can fail one of the DSs without failing them all.
This patch changes the default behaviour to use separate TCP connections
for each DS even if they reside on the same machine.
I do not believe that this will be a problem for extant pNFS servers, but
a sysctl can be set to restore the old behaviour if this change causes a
problem for an extant pNFS server.
This patch only affects the NFSv4.1 pNFS client.
MFC after: 2 weeks
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds the kernel code needed by pnfsdskill(8)
to implement this "forced" case of disabling a DS.
This patch only affects the pNFS server.
Without this patch, the pNFS server distributes the data storage files across
all of the specified DSs.
A tester noted that it would be nice if a system administrator could control
which DSs are used to store the file data for a given exported MDS file system.
This patch adds the kernel support to do this. It also makes a slight semantic
change to nfsv4_findmirror(), since some uses of it no longer require that
the DS being searched for have a current mirror.
A patch that will be committed in a few minutes will modify the nfsd daemon
to support this feature.
The patch should only affect sites using the pNFS server (specified via the
"-p" command line option for nfsd.
Suggested by: james.rose@framestore.com
Most NFSv4.1 compound RPCs start with a Sequence operation. For these
cases, save the slotid and note that it is saved by setting ND_HASSLOTID.
This is used by r335568 to free up the session slot and disable it.
MFC after: 2 weeks
r335568 uses a flag called ND_HASSLOTID to indicate that the slotid is set,
so it can free and invalidate it.
This flag needs to be set, which will be done in a subsequent commit.
MFC after: 2 weeks
When a "soft" mount is used for NFSv4.1, an RPC that fails without completing
will leave a slot in the NFSv4.1 session in an indeterminate state.
As such, all that can be done is free up the slot while making is no longer
usable.
A "soft" NFSv4.1 mount is not recommended in general, since it will leave
Open/Lock state in an indeterminate state. An exception is a pNFS mount of
a DS, since there are no Opens/Locks done for them except file creates
where loss of the Open state does not matter.
The patch also makes connections to DSs soft, so that they will fail when
a DS is non-functional or network partitioned, allowing the pNFS MDS to disable
the DS for a mirrored configuration.
This patch should not affect normal "hard" NFSv4.1 mounts.
MFC after: 2 weeks
When the NFSv4.1 pNFS client gets an error for a DS I/O operation using a
Flexible File layout, it returns the layout with an error.
This patch changes the code slightly, so that it returns the layout for all
errors except EACCES and lets the MDS decide what to do based on the error.
It also makes a couple of changes to nfscl_layoutrecall() to ensure that
the first layoutreturn(s) will have the error in the reply.
Plus, the patch adds a wakeup() so that the "nfscl" thread won't wait 1sec
before doing the LayoutReturn.
Tested against the pNFS service.
This patch should not affect non-pNFS use of the client.
The unused "dsp" argument will be used by a future patch that disables the
connection to the DS when possible.
MFC after: 2 weeks
The Flexible File layout LayoutReturn operation has argument fields where
an I/O error encountered when attempting I/O on a DS can be reported back
to the MDS.
This patch adds code to the client to do this for the Flexible File layout
mirrored case.
This patch should only affect mounts using the "pnfs" option against servers
that support the Flexible File layout.
MFC after: 2 weeks
Normally "soft,retrans=2" cannot be safely used on NFSv4 mounts, since
the RPC can fail and leave the open/lock state in an undefined state.
Doing I/O on a pNFS DS is an exception to this, since no open/lock state
is maintained on the DS server.
It is useful to do "soft,retrans=2" connections to a DS when it is mirrored,
so that the client can detect failure of the DS. As such, mounts from the MDS
to the DSs should use these mount options when mirroring is enabled.
However, the NFSv4.1 client still leaves the session in an undefined state
when this happens.
This patch fixes the problem by setting the session defunct, so it will
no longer be used.
The patch also sets "retries=2" on the connections done by the client to
a DS, which is the internal equivalent of "soft,retrans=2".
The client does not know if the server implements mirroring at connection
time, but always doing this should be safe, since it will fall back on doing
I/O via the MDS as a proxy when there is a failure doing an I/O RPC to the DS.
This patch should not affect non-pNFS client mounts.
MFC after: 2 weeks
Four functions nfscl_reqstart(), nfscl_fillsattr(), nfsm_stateidtom()
and nfsmnt_mdssession() are now called from within the nfsd.
As such, they needed to be moved from nfscl.ko to nfscommon.ko so that
nfsd.ko would load when nfscl.ko wasn't loaded.
Reported by: herbert@gojira.at
This code merge adds a pNFS service to the NFSv4.1 server. Although it is
a large commit it should not affect behaviour for a non-pNFS NFS server.
Some documentation on how this works can be found at:
http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt
and will hopefully be turned into a proper document soon.
This is a merge of the kernel code. Userland and man page changes will
come soon, once the dust settles on this merge.
It has passed a "make universe", so I hope it will not cause build problems.
It also adds NFSv4.1 server support for the "current stateid".
Here is a brief overview of the pNFS service:
A pNFS service separates the Read/Write oeprations from all the other NFSv4.1
Metadata operations. It is hoped that this separation allows a pNFS service
to be configured that exceeds the limits of a single NFS server for either
storage capacity and/or I/O bandwidth.
It is possible to configure mirroring within the data servers (DSs) so that
the data storage file for an MDS file will be mirrored on two or more of
the DSs.
When this is used, failure of a DS will not stop the pNFS service and a
failed DS can be recovered once repaired while the pNFS service continues
to operate. Although two way mirroring would be the norm, it is possible
to set a mirroring level of up to four or the number of DSs, whichever is
less.
The Metadata server will always be a single point of failure,
just as a single NFS server is.
A Plan B pNFS service consists of a single MetaData Server (MDS) and K
Data Servers (DS), all of which are recent FreeBSD systems.
Clients will mount the MDS as they would a single NFS server.
When files are created, the MDS creates a file tree identical to what a
single NFS server creates, except that all the regular (VREG) files will
be empty. As such, if you look at the exported tree on the MDS directly
on the MDS server (not via an NFS mount), the files will all be of size 0.
Each of these files will also have two extended attributes in the system
attribute name space:
pnfsd.dsfile - This extended attrbute stores the information that
the MDS needs to find the data storage file(s) on DS(s) for this file.
pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime
and Change attributes for the file, so that the MDS doesn't need to
acquire the attributes from the DS for every Getattr operation.
For each regular (VREG) file, the MDS creates a data storage file on one
(or more if mirroring is enabled) of the DSs in one of the "dsNN"
subdirectories. The name of this file is the file handle
of the file on the MDS in hexadecimal so that the name is unique.
The DSs use subdirectories named "ds0" to "dsN" so that no one directory
gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize
on the MDS, with the default being 20.
For production servers that will store a lot of files, this value should
probably be much larger.
It can be increased when the "nfsd" daemon is not running on the MDS,
once the "dsK" directories are created.
For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces
of information to the client that allows it to do I/O directly to the DS.
DeviceInfo - This is relatively static information that defines what a DS
is. The critical bits of information returned by the FreeBSD
server is the IP address of the DS and, for the Flexible
File layout, that NFSv4.1 is to be used and that it is
"tightly coupled".
There is a "deviceid" which identifies the DeviceInfo.
Layout - This is per file and can be recalled by the server when it
is no longer valid. For the FreeBSD server, there is support
for two types of layout, call File and Flexible File layout.
Both allow the client to do I/O on the DS via NFSv4.1 I/O
operations. The Flexible File layout is a more recent variant
that allows specification of mirrors, where the client is
expected to do writes to all mirrors to maintain them in a
consistent state. The Flexible File layout also allows the
client to report I/O errors for a DS back to the MDS.
The Flexible File layout supports two variants referred to as
"tightly coupled" vs "loosely coupled". The FreeBSD server always
uses the "tightly coupled" variant where the client uses the
same credentials to do I/O on the DS as it would on the MDS.
For the "loosely coupled" variant, the layout specifies a
synthetic user/group that the client uses to do I/O on the DS.
The FreeBSD server does not do striping and always returns
layouts for the entire file. The critical information in a layout
is Read vs Read/Writea and DeviceID(s) that identify which
DS(s) the data is stored on.
At this time, the MDS generates File Layout layouts to NFSv4.1 clients
that know how to do pNFS for the non-mirrored DS case unless the sysctl
vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File
layouts are generated.
The mirrored DS configuration always generates Flexible File layouts.
For NFS clients that do not support NFSv4.1 pNFS, all I/O operations
are done against the MDS which acts as a proxy for the appropriate DS(s).
When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy.
If the DS is on the same machine, the MDS/DS will do the RPC on the DS as
a proxy and so on, until the machine runs out of some resource, such as
session slots or mbufs.
As such, DSs must be separate systems from the MDS.
Tested by: james.rose@framestore.com
Relnotes: yes
There were a couple of cases in newnfs_request() that it assumed that it
was an NFSv4.1 mount with a session. This should always be the case when
a Sequence operation is in the reply or the server replies NFSERR_BADSESSION.
However, if a server was broken and sent an erroneous reply, these safety
belt checks should avoid trouble.
The one check required a small tweak to nfsmnt_mdssession() so that it
returns NULL when there is no session instead of the offset of the field
in the structure (0x8 for i386).
This patch should have no effect on normal operation of the client.
Found by inspection during pNFS server development.
MFC after: 2 weeks
These macros were added because they were used by the pNFS server last
year. However, they are no longer used by the pNFS server code and
might as well be deleted.
This is a partial reversion of r326735.
NFSDEV_MIRRORSTR was defined for the pNFS server, but has not been used,
so this patch deletes it. It also cleans up the comment and hopefully
makes it more readable.
The intent was that the default would be based on number of CPUs, but the
code disabled using taskqueue() by default.
This code is only executed when mounting a NFSv4.1 server that supports the
Flexible File layout for pNFS and, since such servers are rare, this change
shouldn't result in a POLA violation.
(The FreeBSD pNFS server is still a project and the only other one that
uses Flexible File layout is being developed by Primary Data and I don't
know if they have even shipped any to customers yet.)
Found while testing the pNFS server.
Under some fairly unusual circumstances, the Linux NFSv4.1 client is
doing a BindConnectiontoSession operation for TCP connections.
It is also used by the ESXi6.5 NFSv4.1 client.
This patch adds this operation to the NFSv4.1 server.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com
MFC after: 2 weeks
The NFSv4 protocol requires that the server only allow reclaim of state
and not issue any new open/lock state for a grace period after booting.
The NFSv4.0 protocol required this grace period to be greater than the
lease duration (over 2minutes). For NFSv4.1, the client tells the server
that it has done reclaiming state by doing a ReclaimComplete operation.
If all NFSv4 clients are NFSv4.1, the grace period can end once all the
clients have done ReclaimComplete, shortening the time period considerably.
This patch does this. If there are any NFSv4.0 mounts, the grace period
will still be over 2minutes.
This change is only an optimization and does not affect correct operation.
Tested by: andreas.nagy@frequentis.com
MFC after: 2 months
The Linux client now uses the TestStateID operation, so this patch adds
support for it to the NFSv4.1 server. The FreeBSD client never uses this
operation, so it should not be affected.
MFC after: 2 months
Mechanically replace uses of MALLOC/FREE with appropriate invocations of
malloc(9) / free(9) (a series of sed expressions). Something like:
* MALLOC(a, b, ... -> a = malloc(...
* FREE( -> free(
* free((caddr_t) -> free(
No functional change.
For now, punt on modifying contrib ipfilter code, leaving a definition of
the macro in its KMALLOC().
Reported by: jhb
Reviewed by: cy, imp, markj, rmacklem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14035
pathconf(2) and fpathconf(2) both return a long. The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly. Instead, the system calls explicitly store the
returned long value in td_retval[0].
Requested by: bde
Reviewed by: kib
Sponsored by: Chelsio Communications
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
- Define a NFS_LINK_MAX as UINT32_MAX to match the wire protocol.
- Use NFS_LINK_MAX instead of LINK_MAX as the fallback value reported
for a PATHCONF RPC by the NFS server.
- Use NFS_LINK_MAX instead of LINK_MAX as the default value reported
by the NFS client pathconf() if not overridden by the NFS server.
- When reading the link count out of an RPC reply, read the full 32
bits instead of the lower 16 bits.
Reviewed by: rmacklem (earlier version)
Sponsored by: Chelsio Communications
This commit defines some macros used by the pNFS server code.
They will not be used until the main pNFS server code merge occurs,
which will probably be in April 2018.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
When the NFSv4.1 pNFS client is using a Flexible File Layout specifying
mirrored Data Servers, it must do the writes and commits to all mirrors.
This patch modifies the client to use a taskqueue to perform these writes
and commits concurrently.
The number of threads can't be changed for taskqueue(9), so it is set
to 4 * mp_ncpus by default, but this can be overridden by setting the
sysctl vfs.nfs.pnfsiothreads.
Differential Revision: https://reviews.freebsd.org/D12632
When a "pnfs" NFSv4.1 mount is hung because of an unresponsive DS,
a forced dismount wouldn't work, because the RPC socket for the DS
was not being closed. This patch fixes this.
This will only affect "pnfs" mounts where the pNFS server's DS
is unresponsive (crashed or network partitioned or...).
Found during testing of the pNFS server.
MFC after: 2 weeks
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
I/O error(s) occur when attempting to do I/O on a DS.
This will be fixed in a future commit, since it is important for the
MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
Making them happen concurrently will be done in a future commit,
after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
now, I don't intend to implement this until there is a need for it.
There is support for NFSv4.1 and NFSv3 DSs.
This patch adds a few definitions for the Flex File Layout.
Until a future commit adds Flex File layout support, these new fields
are not used.
This patch should not affect the "pnfs" option for File Layout.
This patch modifies the pNFS client layout and deviceinfo structures
to add fields and unions for the Flex File Layout. Until a future
commit adds Flex File layout support, these new fields are not used.
This patch should not affect the "pnfs" option for File Layout.
This patch adds a NFSSTA_FLEXFILE flag that will be used to enable
Flexible File Layout for the NFSv4.1 pNFS client. It is not yet
used, but will be after a future commit adds Flex File Layout support.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
This patch adds "vers" and "minorvers" arguments to nfscl_reqstart().
The patch always passes them in as "0" and that implies no change
in semantics. These arguments will be used by a future commit that
adds support for the Flexible File Layout.
Make the NFSv4 pNFS client function nfsrpc_layoutget() a static, since it
is only used in sys/fs/nfsclient/nfs_clrpcops.c.
This prepares the code for future patches that add Flex File layout
support.
This patch adds a new function called nfsm_uiombuflist(), which is
similar to nfsm_uiombuf(), but doesn't not use the fields in
struct nfsrv_descript. This new function will be used by the pNFS client
for writing to mirrors using Flex Files layout.
The function is not yet called anywhere.
Also, get rid of #ifndef APPLE, which is ancient cruft left over from
the Mac OSX port of the NFSv4 client.
Simplify nfsrpc_layoutreturn() args. in preparation for the addition
of Flex File layout support, since File layout uses a 0 length field.
Flex Files does use a longer field, but that will be added in a
subsequent commit.
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
This patch defines a macro that checks for MNTK_UNMOUNTF and replaces
explicit checks with this macro. It has no effect on semantics, but
prepares the code for a future patch where there will also be a
NFS specific flag for "forced dismount about to occur".
Suggested by: kib
MFC after: 2 weeks
It applies to both NFS client and NFS server, and is useful for both.
This is different from vfs.nfsd.enable_stringtouid, which is specific
to server side.
Reviewed by: rmacklem@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This patch adds support for AF_LOCAL socket upcalls to an nfsuserd daemon
that supports them. A future patch to the nfsuserd daemon will use AF_LOCAL
sockets to avoid a problem when using upcalls to 127.0.0.1 if jails are
in use.
Suggested by: dfr
PR: 205193
vfs.nfsd.nfsd_enable_stringtouid, but in reverse - when set to 1,
it forces the NFSv4 server to return numeric UIDs and GIDs instead
of "user@domain" strings. This helps with clients that can't
translate returned identifiers, eg when rerooting.
The same can be achieved by just never running nfsuserd(8),
but the sysctl is useful to toggle the behaviour back and forth
without rebooting.
Reviewed by: rmacklem (earlier version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11326
A NFSv4.1/pNFS server using File Layout can specify that Commit operations
are to be done against the DS instead of MDS. Since no extant pNFS
server did this, the code was untested and "#ifdef notyet".
The FreeBSD pNFS server I am developing does specify that Commits be done
through the DS, so the code has been enabled/tested.
This patch should only affect the case of a pNFS server that specfies
Commits through the DS.
PR: 219551
MFC after: 2 weeks
When the NFSv4.1 client is doing pNFS, it needs to get an Open and
a Layout for every file it will be doing I/O on. The current code
does two separate RPCs to get these. This patch adds two new compounds
that do the both the Open and LayoutGet in the same RPC, reducing the
RPC count.
It also factors out the code that sets up and parses the LayoutGet operation
into separate functions, so that the code doesn't get duplicated for
these new RPCs.
This patch is fairly large, but should only affect the NFSv4.1 client
when the "pnfs" option is specified.
PR: 219550
MFC after: 2 weeks
r320070 removed the definition of maxbcachebuf from sys/param.h to
fix the build for arm.
This patch adds the definition of maxbcachebuf to sys/buf.h, which
should be ok, since sys/buf.h is not being included in arm/arm/elf_note.S.
Suggested by: kib
MFC after: 2 weeks
The code still doesn't use d_off. That will come in a future commit.
The code also removes the checks for servers returning a fileno that
doesn't fit in 32bits, since that should work ok now.
Bump __FreeBSD_version since this patch changes the interface between
the NFS kernel modules.
Reviewed by: kib
arm build.
In the arm build, elf_note.S includes sys/param.h and then does an
elf macro called ELFNOTE(). Although the compile error doesn't make
sense to me, I believe it just means that an "extern ..." can't exist
in param.h for this inclusion case.
I suspect adding #if !defined(LOCORE) might fix the build, but this
commit just takes the definition out.
I will ask freebsd-current@ what is the best was to deal with this
and do a subsequent commit after that.
Reported by: melounmichal@gmail.com
By making MAXBCACHEBUF a tunable, it can be increased to allow for
larger read/write data sizes for the NFS client.
The tunable is limited to MAXPHYS, which is currently 128K.
Making MAXPHYS a tunable or increasing its value is being discussed,
since it would be nice to support a read/write data size of 1Mbyte
for the NFS client when mounting the AmazonEFS file service.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10991
This definition is a part of the maxiotune2 patch that will be
committed soon. It is being committed separately to ease merging
with the pNFS projects subversion trees.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10991
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
An NFSv4 server has the option of allowing a Read to be done using a Write
Open. If this is not allowed, the server will return NFSERR_OPENMODE.
This patch attempts the read with a write open and then disables this
if the server replies NFSERR_OPENMODE.
This change will avoid some uses of the special stateids. This will be
useful for pNFS/DS Reads, since they cannot use special stateids.
It will also be useful for any NFSv4 server that does not support reading
via the special stateids. It has been tested against both types of NFSv4 server.
MFC after: 2 weeks
The NFSv4 Setattr operation always has reply data even when it fails,
so don't set the ND_NOMOREDATA for it. This would only affect unusual
cases where Setattr fails and the RPC code wants to parse the rest of
the compound. Detected during recent development related to the pNFS server.
MFC after: 2 weeks
An NFSv4.1 client connection to a Data Server (DS) should not have a
backchannel. This patch fixes the NFSv4.1/pNFS client to not do a backchannel
for this case.
Found during recent testing with the pNFS server under development.
MFC after: 2 weeks
The default uid/gid for NFSv4 are set by the nfsuserd(8) daemon.
However, they were 0 until the nfsuserd(8) was run. Since it is
possible to use NFSv4 without running the nfsuserd(8) daemon, set them
to nobody/nogroup initially.
Without this patch, the values would be set by the nfsuserd(8) daemon
and left changed even if the nfsuserd(8) daemon was killed. The default
values of 0 meant that setting a group to "wheel" would fail even when
done by root.
It also adds a definition of GID_NOGROUP to sys/conf.h.
Discussed on: freebsd-current@
MFC after: 2 weeks
The default uid/gid for NFSv4 are set by the nfsuserd(8) daemon.
However, they were 0 until the nfsuserd(8) was run. Since it is
possible to use NFSv4 without running the nfsuserd(8) daemon, set them
to nobody/nogroup initially.
Without this patch, the values would be set by the nfsuserd(8) daemon
and left changed even if the nfsuserd(8) daemon was killed. Also, the default
values of 0 meant that setting a group to "wheel" would fail even when
done by root and this patch fixes this issue.
MFC after: 2 weeks
The "cred" argument of ncl_flush() is unused and it was confusing to have
the code passing in NULL for this argument in some cases. This patch deletes
this argument.
There is no semantic change because of this patch.
MFC after: 2 weeks
Some NFSv4.1 servers such as AmazonEFS can only support a small fixed number
of open_owner4s. This patch adds a mount option called "oneopenown" that
can be used for NFSv4.1 mounts to make the client do all Opens with the
same open_owner4 string. This option can only be used with NFSv4.1 and
may not work correctly when Delegations are is use.
Reported by: cperciva
Tested by: cperciva
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8988
The AmazonEFS NFSv4.1 server does not support the FILES_FREE and FILES_TOTAL
attributes. As such, an NFSv4.1 mount to the server would return garbage
for these values. This patch initializes the fields of the nfsstatfs structure,
so that "df" and friends will at least return consistent bogus values.
This patch should have effect when mounting other NFSv4.1 servers.
Reported by: cperciva
MFC after: 2 weeks
For the ReclaimComplete operation, the RPC layer should not loop on
NFSERR_BADSESSION. If it does, the recovery thread (nfscl) can get stuck
looping and will not do a recovery.
This patch fixes it so it does not loop. This bug only affects NFSv4.1 and
only when a server reboots.
Tested by: cperciva
PR: 215886
MFC after: 2 weeks
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Right now size of the structure is 472 bytes on amd64, which is
already large and stack allocations are indesirable. With the ino64
work, MNAMELEN is increased to 1024, which will make it impossible to have
struct statfs on the stack.
Extracted from: ino64 work by gleb
Discussed with: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
For most NFSv4.1 servers, a NFS4ERR_BAD_SESSION error is a rare failure
that indicates that the server has lost session/open/lock state.
However, recent testing by cperciva@ against the AmazonEFS server found
several problems with client recovery from this due to it generating this
failure frequently.
Briefly, the problems fixed are:
- If all session slots were in use at the time of the failure, some processes
would continue to loop waiting for a slot on the old session forever.
- If an RPC that doesn't use open/lock state failed with NFS4ERR_BAD_SESSION,
it would fail the RPC/syscall instead of initiating recovery and then
looping to retry the RPC.
- If a successful reply to an RPC for an old session wasn't processed
until after a new session was created for a NFS4ERR_BAD_SESSION error,
it would erroneously update the new session and corrupt it.
- The use of the first element of the session list in the nfs mount
structure (which is always the current metadata session) was slightly
racey. With changes for the above problems it became more racey, so all
uses of this head pointer was wrapped with a NFSLOCKMNT()/NFSUNLOCKMNT().
- Although the kernel malloc() usually allocates more bytes than requested
and, as such, this wouldn't have caused problems, the allocation of a
session structure was 1 byte smaller than it should have been.
(Null termination byte for the string not included in byte count.)
There are probably still problems with a pNFS data server that fails
with NFS4ERR_BAD_SESSION, but I have no server that does this to test
against (the AmazonEFS server doesn't do pNFS), so I can't fix these yet.
Although this patch is fairly large, it should only affect the handling
of NFS4ERR_BAD_SESSION error replies from an NFSv4.1 server.
Thanks go to cperciva@ for the extension testing he did to help isolate/fix
these problems.
Reported by: cperciva
Tested by: cperciva
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D8745
The "-z" option on nfsstats was erroneously zeroing out the counts
of NFSv4 state structures. These counts will normally go back down
to zero as state is released. When zeroed out by "-z", these counts
can go negative. This patch fixes this problem.
MFC after: 2 weeks
Rather than printing a warning for every time we receive a fileid > 2^32
from the NFS server, count warnings and print at most one of each warning
type per minute, e.g.,
Nov 15 05:17:34 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (24730 occurrences)
Nov 15 05:17:56 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (178 occurrences)
Nov 15 05:18:53 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (7582 occurrences)
Nov 15 05:18:58 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (23 occurrences)
A buildworld with an NFS mounted /usr/obj can otherwise result in
hundreds of thousands of lines being printed, which seems unnecessarily
verbose.
When ino_t becomes a 64-bit type, these printfs will no longer be needed
(and the problems associated with truncating 64-bit fileids to generate
32-bit inode numbers will also go away).
Reviewed by: rmacklem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8523
the patch in D1626 plus changes so that it includes counts for
NFSv4.1 (and the draft of NFSv4.2).
Also, make all the counts uint64_t and add a vers field at the
beginning, so that future revisions can easily be implemented.
There is code in place to handle the old vesion of the nfsstats
structure for backwards binary compatibility.
Subsequent commits will update nfsstat(8) to use the new fields.
Submitted by: will (earlier version)
Reviewed by: ken
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D1626
and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
This is only allowed by root and only used by the nfs daemon, which
should not provide an incorrect value. However, it's still good
practice to validate data provided by userland.
PR: 206626
Reported by: CTurt <cturt@hardenedbsd.org>
Reviewed by: rmacklem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D6201
The ordering of acquisition of the state and session mutexes was
reversed in two cases executed when an NFSv4.1 client created/freed
a session. Since clients will typically do this only when mounting
and dismounting, the likelyhood of causing a deadlock was low but possible.
This can only occur for NFSv4.1 mounts, since the others do not
use sessions.
This was detected while testing the pNFS server/client where the
client crashed during dismounting.
The patch also reorders the unlocks, although that isn't necessary
for correct operation.
MFC after: 2 weeks
the old and new NFS clients. He did a good job of isolating the problem
which was caused by the new NFS client not setting the post write mtime
correctly. The new NFS client code was cloned from the old client, but
was incorrect, because the mtime in the nfs vnode's cache wasn't yet
updated. This patch fixes this problem. The patch also adds missing mutex
locking.
Reported and tested by: bde
MFC after: 2 weeks
* Use standard IPv6 SAS instead of rt->rt_ifa address.
* Make address lookup work for IPv6 LLA.
* Save address into buffer provided by caller instead of using static vars.
Discussed with: rmacklem
This leak was introduced by r291527.
Since the nfscommon.ko module is rarely unloaded, this leak would not
have been much of an issue.
MFC after: 2 weeks
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
the name of a filesystem when setting it as the first parameter to the
getnewvnode() function. Most filesystems call getnewvnode from just one
place so can use a literal string as the first parameter. However, NFS
calls getnewvnode from two places, so we create a global constant string
that can be used by the two instances. This change also collapses two
instances of getnewvnode() in the UFS filesystem to a single call.
Reviewed by: kib
Tested by: Peter Holm
(opens, locks, etc) is retained, which I believe is correct behaviour.
However, for NFSv4.1, the server also retained a reference to the xprt
(RPC transport socket structure) for the backchannel. This caused
svcpool_destroy() to not call SVC_DESTROY() for the xprt and allowed
a socket upcall to occur after the mutexes in the svcpool were destroyed,
causing a crash.
This patch fixes the code so that the backchannel xprt structure is
dereferenced just before svcpool_destroy() is called, so the code
does do an SVC_DESTROY() on the xprt, which shuts down the socket upcall.
Tested by: g_amanakis@yahoo.com
PR: 204340
MFC after: 2 weeks
sign on every directory exported via NFSv4 with NFSv4 ACLs enabled.
Reviewed by: rmacklem@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3502
No appreciable change in performance was observed after increasing
the sizes of these tables and then testing with a single client.
However, there was an email that indicated high CPU overheads for
a heavily loaded NFSv4 and it is hoped that increasing the sizes
of the hash tables via these tunables might help.
The tables remain the same size by default.
Differential Revision: https://reviews.freebsd.org/D2596
MFC after: 2 weeks
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
largest size for a buffer in the buffer cache. This patch
defines a new constant MAXBCACHEBUF, which is the largest
size for a buffer in the buffer cache. Having a separate
constant allows MAXBCACHEBUF to be set larger than MAXBSIZE
on a per-architecture basis, so that NFS can do larger read/writes
for these architectures. It modifies sys/param.h so that BKVASIZE
can also be set on a per-architecture basis.
A couple of cases where NFS used MAXBSIZE instead of NFS_MAXBSIZE
is fixed as well.
Differential Revision: https://reviews.freebsd.org/D2330
Reviewed by: mav, kib
MFC after: 2 weeks
can perform better when using a 128K read/write data size.
This patch changes NFS_MAXDATA from 64K to 128K so that
clients can use 128K for NFS mounts to allow this.
The patch also renames NFS_MAXDATA to NFS_SRVMAXIO so
that it is clear that it applies to the NFS server side
only. It also avoids a name conflict with the NFS_MAXDATA
defined in rpcsvc/nfs_prot.h, that is used for userland RPC.
Tested by: mav
Reviewed by: mav
MFC after: 2 weeks
in the NFS server; garbage collect now-unused NFSMSIZ() and M_HASCL()
macros. Also garbage collect now-unused versions in headers for the
removed previous NFS client and server.
Reviewed by: rmacklem
Sponsored by: EMC / Isilon Storage Division
which means that the NFSCLIENT and NFSSERVER
kernel options will no longer work. This commit
only removes the kernel components. Removal of
unused code in the user utilities will be done
later. This commit does not include an addition
to UPDATING, but that will be committed in a
few minutes.
Discussed on: freebsd-fs
This assertion was added in r246213 as a guard against corrupted mbufs
arriving from drivers, the key distinguishing factor of said mbufs being
that they had a negative length. Given we're in a while loop specifically
designed to skip over zero-length mbufs, panicking on a zero-length mbuf
seems incorrect.
No objection from: kib
This fix addresses only issues with the pynfs reports, none of these
issues are know to create problems for extant real clients.
Submitted by: Bart Hsiao <bart.hsiao@gmail.com>
Reworked by: myself
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
mbuf-initialisation logic that is best left to centralised mbuf utility
code rather than scattered around the kernel.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
It overflows witness.
Shorten the names of some nfs mutexes.
Reported and tested by: pho
No objections from: rmacklem, mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
into head. The code is not believed to have any effect
on the semantics of non-NFSv4.1 server behaviour.
It is a rather large merge, but I am hoping that there will
not be any regressions for the NFS server.
MFC after: 1 month
should either accept owner and owner_group strings that are just
the digits of the uid/gid or return NFS4ERR_BADOWNER.
This patch adds a sysctl vfs.nfsd.enable_stringtouid, which can
be set to enable the server w.r.t. accepting numeric string. It
also ensures that NFS4ERR_BADOWNER is returned if numeric uid/gid
strings are not enabled. This fixes the server for recent Linux
nfs4 clients that use numeric uid/gid strings by default.
Reported and tested by: craigyk@gmail.com
MFC after: 2 weeks
attributes. This allows the client to cache directory names
when they are looked up, reducing the Lookup RPC count by
about 40% for software builds.
MFC after: 2 weeks
- Introduce additional hash to group requests by hash of sockref. This
allows to process TCP acknowledgements without looping though all the cache,
and as result allows to do it every time.
- Indroduce additional callbacks to notify application layer about sockets
disconnection. Without this last few requests processed just before socket
disconnection never processed their ACKs and stuck in cache for many hours.
- Implement transport-specific method for tracking reply acknowledgements.
New implementation does not cross multiple stack layers to get the data and
does not have race conditions that previously made some requests stuck
in cache. This could be done more efficiently at sockbuf layer, but that
would broke some KBIs, while I don't know other consumers for it aside NFS.
- Instead of traversing all DRC twice per request, run cleaning only once
per request, and except in some conditions traverse only single hash slot
at a time.
Together this limits NFS DRC growth only to situations of real connectivity
problems. If network is working well, and so all replies are acknowledged,
cache remains almost empty even after hours of heavy load. Without this
change on the same test cache was growing to many thousand requests even
with perfectly working local network.
As another result this reduces CPU time spent on the DRC handling during
SPEC NFS benchmark from about 10% to 0.5%.
Sponsored by: iXsystems, Inc.
when a Getattr for a file is done by a client other than the one that
holds the file's delegation. This would only happen when delegations
are enabled and the problem is fixed by this patch.
MFC after: 1 week
nfsv4_fillattr() as NULLs for the Getattr callback. This caused
nfsv4_fillattr() to not fill in the Change attribute for the reply.
I believe this was a violation of the RFC, but had little effect on
server behaviour. This patch passes a non-NULL p argument to fix this.
MFC after: 1 week
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
The hang occurred in nfsv4_setsequence() when it couldn't find an
available session slot and is fixed by checking for a forced dismount
in progress and just returning for this case.
MFC after: 1 month
CLNT_CONTROL() would be called on "client" after it was
released via CLNT_RELEASE(). It was unlikely that this
code path gets executed and I have not heard of any problem
report caused by this bug. This patch fixes the code so that
this cannot happen.
MFC after: 2 months
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
DRC for NFS over TCP.
- Increase the size of the hash tables.
- Create a separate mutex for each hash list of the TCP hash table.
- Single thread the code that deletes stale cache entries.
- Add a tunable called vfs.nfsd.tcphighwater, which can be increased
to allow the cache to grow larger, avoiding the overhead of frequent
scans to delete stale cache entries.
(The default value will result in frequent scans to delete stale cache
entries, analagous to what the pre-patched code does.)
- Add a tunable called vfs.nfsd.cachetcp that can be used to disable
DRC caching for NFS over TCP, since the old NFS server didn't DRC cache TCP.
It also adjusts the size of nfsrc_floodlevel dynamically, so that it is
always greater than vfs.nfsd.tcphighwater.
For UDP the algorithm remains the same as the pre-patched code, but the
tunable vfs.nfsd.udphighwater can be used to allow the cache to grow
larger and reduce the overhead caused by frequent scans for stale entries.
UDP also uses a larger hash table size than the pre-patched code.
Reported by: wollman
Tested by: wollman (earlier version of patch)
Submitted by: ivoras (earlier patch)
Reviewed by: jhb (earlier version of patch)
MFC after: 1 month
the attribute bitmap argument would be non-zero. This caused an
interoperability problem for a recent patch to the Linux NFSv4 client.
The Linux folks have changed their patch to avoid this, but this
patch fixes the problem on the server.
Reported and tested by: Andre Heider (a.heider@gmail.com)
MFC after: 3 days
credentials to the kernel rpc. Modify the NFSv4 client to add
support for the gssname and allgssname mount options to use this
capability. Requires the gssd daemon to be running with the "-h" option.
Reviewed by: jhb
it will work with either the old or new server.
The FHA code keeps a cache of currently active file handles for
NFSv2 and v3 requests, so that read and write requests for the same
file are directed to the same group of threads (reads) or thread
(writes). It does not currently work for NFSv4 requests. They are
more complex, and will take more work to support.
This improves read-ahead performance, especially with ZFS, if the
FHA tuning parameters are configured appropriately. Without the
FHA code, concurrent reads that are part of a sequential read from
a file will be directed to separate NFS threads. This has the
effect of confusing the ZFS zfetch (prefetch) code and makes
sequential reads significantly slower with clients like Linux that
do a lot of prefetching.
The FHA code has also been updated to direct write requests to nearby
file offsets to the same thread in the same way it batches reads,
and the FHA code will now also send writes to multiple threads when
needed.
This improves sequential write performance in ZFS, because writes
to a file are now more ordered. Since NFS writes (generally
less than 64K) are smaller than the typical ZFS record size
(usually 128K), out of order NFS writes to the same block can
trigger a read in ZFS. Sending them down the same thread increases
the odds of their being in order.
In order for multiple write threads per file in the FHA code to be
useful, writes in the NFS server have been changed to use a LK_SHARED
vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem
doesn't allow multiple writers to a file at once. ZFS is currently
the only filesystem that allows multiple writers to a file, because
it has internal file range locking. This change does not affect the
NFSv4 code.
This improves random write performance to a single file in ZFS, since
we can now have multiple writers inside ZFS at one time.
I have changed the default tuning parameters to a 22 bit (4MB)
window size (from 256K) and unlimited commands per thread as a
result of my benchmarking with ZFS.
The FHA code has been updated to allow configuring the tuning
parameters from loader tunable variables in addition to sysctl
variables. The read offset window calculation has been slightly
modified as well. Instead of having separate bins, each file
handle has a rolling window of bin_shift size. This minimizes
glitches in throughput when shifting from one bin to another.
sys/conf/files:
Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c
when either the old or the new NFS server is built.
sys/fs/nfs/nfsport.h,
sys/fs/nfs/nfs_commonport.c:
Bring in changes from Rick Macklem to newnfs_realign that
allow it to operate in blocking (M_WAITOK) or non-blocking
(M_NOWAIT) mode.
sys/fs/nfs/nfs_commonsubs.c,
sys/fs/nfs/nfs_var.h:
Bring in a change from Rick Macklem to allow telling
nfsm_dissect() whether or not to wait for mallocs.
sys/fs/nfs/nfsm_subs.h:
Bring in changes from Rick Macklem to create a new
nfsm_dissect_nonblock() inline function and
NFSM_DISSECT_NONBLOCK() macro.
sys/fs/nfs/nfs_commonkrpc.c,
sys/fs/nfsclient/nfs_clkrpc.c:
Add the malloc wait flag to a newnfs_realign() call.
sys/fs/nfsserver/nfs_nfsdkrpc.c:
Setup the new NFS server's RPC thread pool so that it will
call the FHA code.
Add the malloc flag argument to newnfs_realign().
Unstaticize newnfs_nfsv3_procid[] so that we can use it in
the FHA code.
sys/fs/nfsserver/nfs_nfsdsocket.c:
In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types
that use the LK_SHARED lock type.
sys/fs/nfsserver/nfs_nfsdport.c:
In nfsd_fhtovp(), if we're starting a write, check to see
whether the underlying filesystem supports shared writes.
If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE.
sys/nfsserver/nfs_fha.c:
Remove all code that is specific to the NFS server
implementation. Anything that is server-specific is now
accessed through a callback supplied by that server's FHA
shim in the new softc.
There are now separate sysctls and tunables for the FHA
implementations for the old and new NFS servers. The new
NFS server has its tunables under vfs.nfsd.fha, the old
NFS server's tunables are under vfs.nfsrv.fha as before.
In fha_extract_info(), use callouts for all server-specific
code. Getting file handles and offsets is now done in the
individual server's shim module.
In fha_hash_entry_choose_thread(), change the way we decide
whether two reads are in proximity to each other.
Previously, the calculation was a simple shift operation to
see whether the offsets were in the same power of 2 bucket.
The issue was that there would be a bucket (and therefore
thread) transition, even if the reads were in close
proximity. When there is a thread transition, reads wind
up going somewhat out of order, and ZFS gets confused.
The new calculation simply tries to see whether the offsets
are within 1 << bin_shift of each other. If they are, the
reads will be sent to the same thread.
The effect of this change is that for sequential reads, if
the client doesn't exceed the max_reqs_per_nfsd parameter
and the bin_shift is set to a reasonable value (22, or
4MB works well in my tests), the reads in any sequential
stream will largely be confined to a single thread.
Change fha_assign() so that it takes a softc argument. It
is now called from the individual server's shim code, which
will pass in the softc.
Change fhe_stats_sysctl() so that it takes a softc
parameter. It is now called from the individual server's
shim code. Add the current offset to the list of things
printed out about each active thread.
Change the num_reads and num_writes counters in the
fha_hash_entry structure to 32-bit values, and rename them
num_rw and num_exclusive, respectively, to reflect their
changed usage.
Add an enable sysctl and tunable that allows the user to
disable the FHA code (when vfs.XXX.fha.enable = 0). This
is useful for before/after performance comparisons.
nfs_fha.h:
Move most structure definitions out of nfs_fha.c and into
the header file, so that the individual server shims can
see them.
Change the default bin_shift to 22 (4MB) instead of 18
(256K). Allow unlimited commands per thread.
sys/nfsserver/nfs_fha_old.c,
sys/nfsserver/nfs_fha_old.h,
sys/fs/nfsserver/nfs_fha_new.c,
sys/fs/nfsserver/nfs_fha_new.h:
Add shims for the old and new NFS servers to interface with
the FHA code, and callbacks for the
The shims contain all of the code and definitions that are
specific to the NFS servers.
They setup the server-specific callbacks and set the server
name for the sysctl and loader tunable variables.
sys/nfsserver/nfs_srvkrpc.c:
Configure the RPC code to call fhaold_assign() instead of
fha_assign().
sys/modules/nfsd/Makefile:
Add nfs_fha.c and nfs_fha_new.c.
sys/modules/nfsserver/Makefile:
Add nfs_fha_old.c.
Reviewed by: rmacklem
Sponsored by: Spectra Logic
MFC after: 2 weeks
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
changes in r246417 were incomplete as they did not add explicit calls to
sigdeferstop() around all the places that previously passed SBDRY to
_sleep(). In addition, nfs_getcacheblk() could trigger a write RPC from
getblk() resulting in sigdeferstop() recursing. Rather than manually
deferring stop signals in specific places, change the VFS_*() and VOP_*()
methods to defer stop signals for filesystems which request this behavior
via a new VFCF_SBDRY flag. Note that this has to be a VFC flag rather than
a MNTK flag so that it works properly with VFS_MOUNT() when the mount is
not yet fully constructed. For now, only the NFS clients are set this new
flag in VFS_SET().
A few other related changes:
- Add an assertion to ensure that TDF_SBDRY doesn't leak to userland.
- When a lookup request uses VOP_READLINK() to follow a symlink, mark
the request as being on behalf of the thread performing the lookup
(cnp_thread) rather than using a NULL thread pointer. This causes
NFS to properly handle signals during this VOP on an interruptible
mount.
PR: kern/176179
Reported by: Russell Cattelan (sigdeferstop() recursion)
Reviewed by: kib
MFC after: 1 month
195702, 195703, and 195821 prevented a thread from suspending while holding
locks inside of NFS by forcing the thread to fail sleeps with EINTR or
ERESTART but defer the thread suspension to the user boundary. However,
this had the effect that stopping a process during an NFS request could
abort the request and trigger EINTR errors that were visible to userland
processes (previously the thread would have suspended and completed the
request once it was resumed).
This change instead effectively masks stop signals while in the NFS client.
It uses the existing TDF_SBDRY flag to effect this since SIGSTOP cannot
be masked directly. Also, instead of setting PBDRY on individual sleeps,
the NFS client now sets the TDF_SBDRY flag around each NFS request and
stop signals are masked for all sleeps during that region (the previous
change missed sleeps in lockmgr locks). The end result is that stop
signals sent to threads performing an NFS request are completely
ignored until after the NFS request has finished processing and the
thread prepares to return to userland. This restores the behavior of
stop signals being transparent to userland processes while still
preventing threads from suspending while holding NFS locks.
Reviewed by: kib
MFC after: 1 month
this check is somewhere in the network code, but this assertion
already proven to be useful in catching what seems to be driver bugs
causing NFS scrambling random memory.
Discussed with: rmacklem
MFC after: 1 week
- Use NFSD_MONOSEC (which maps to time_uptime) instead of the seconds
portion of wall-time stamps to manage timeouts on events.
- Remove unused nd_starttime from the per-request structure in the new
NFS server.
- Use nanotime() for the modification time on a delegation to get as
precise a time as possible.
- Use time_second instead of extracting the second from a call to
getmicrotime().
Submitted by: bde (3)
Reviewed by: bde, rmacklem
MFC after: 2 weeks
by returning an error of EINTR rather than EACCES.
- While here, bring back some (but not all) of the NFS RPC statistics lost
when krpc was committed.
Reviewed by: rmacklem
MFC after: 1 week
to head. I don't think the NFS client behaviour will change unless
the new "minorversion=1" mount option is used. It includes basic
NFSv4.1 support plus support for pNFS using the Files Layout only.
All problems detecting during an NFSv4.1 Bakeathon testing event
in June 2012 have been resolved in this code and it has been tested
against the NFSv4.1 server available to me.
Although not reviewed, I believe that kib@ has looked at it.
which dumps out the actual options being used by an NFS mount.
This will be used to implement a "-m" option for nfsstat(1).
Reviewed by: alfred
MFC after: 2 weeks
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
and owner_group strings that consist entirely of
digits, interpreting them as the uid/gid number.
This change was needed since new (>= 3.3) Linux
servers reply with these strings by default.
This change is mandated by the rfc3530bis draft.
Reported on freebsd-stable@ under the Subject
heading "Problem with Linux >= 3.3 as NFSv4 server"
by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de
Reviewed by: jhb
MFC after: 2 weeks
Use it for a printf() that can be harmlessly generated for mmap()'d
files. It will be used extensively for the NFSv4.1 client.
Debugging printf()s are enabled by setting vfs.nfs.debuglevel to
a non-zero value. The higher the value, the more debugging printf()s.
Reviewed by: jhb
MFC after: 2 weeks
to freebsd-fs@, where the setfacl of an NFSv4 acl would fail.
This was caused by the VOP_ACLCHECK() call for ZFS replying
EOPNOTSUPP. After discussion with rwatson@, it was determined
that a call to VOP_ACLCHECK() before doing VOP_SETACL() is not
required. This patch fixes the problem by deleting the
VOP_ACLCHECK() call.
Tested by: Andrew Leonard (previous version)
MFC after: 1 week
subject "Data corruption over NFS in -current". During investigation
of this, I came across an ugly bogusity in the new NFS client where
it replaced the cr_uid with the one used for the mount. This was
done so that "system operations" like the NFSv4 Renew would be
performed as the user that did the mount. However, if any other
thread shares the credential with the one doing this operation,
it could do an RPC (or just about anything else) as the wrong cr_uid.
This patch fixes the above, by using the mount credentials instead of
the one provided as an argument for this case. It appears
to have fixed Martin's problem.
This patch is needed for NFSv4 mounts and NFSv3 mounts against
some non-FreeBSD servers that do not put post operation attributes
in the NFSv3 Statfs RPC reply.
Tested by: Martin Cracauer (cracauer at cons.org)
Reviewed by: jhb
MFC after: 2 weeks
would go negative after using the "-z" option to zero out the stats.
This patch fixes that by not zeroing out the srvcache_size field
for "-z", since it is the size of the cache and not a counter.
MFC after: 2 weeks
The effect of this was, for clients mounted via inet6 addresses,
that the DRC cache would never have a hit in the server. It also
broke NFSv4 callbacks when an inet6 address was the only one available
in the client. This patch fixes the above, plus deletes opt_inet6.h
from a couple of files it is not needed for.
MFC after: 2 weeks
It seems strchr() and strrchr() are used more often than index() and
rindex(). Therefore, simply migrate all kernel code to use it.
For the XFS code, remove an empty line to make the code identical to
the code in the Linux kernel.
get a reply of EEXIST from an NFS server when a Mkdir RPC was retried,
for an NFS over UDP mount.
Upon investigation, it was found that the client was retransmitting
the Mkdir RPC request over UDP, but with a different xid. As such,
the retransmitted message would miss the Duplicate Request Cache
in the server, causing it to reply EEXIST. The kernel client side
UDP rpc code has two timers. The first one causes a retransmit using
the same xid and socket and was set to a fixed value of 3seconds.
(The default can be overridden via CLSET_RETRY_TIMEOUT.)
The second one creates a new socket and xid and should be larger
than the first. However, both NFS clients were setting the second
timer to nm_timeo ("timeout=<value>" mount argument), which defaulted to
1second, so the first timer would never time out.
This patch fixes both NFS clients so that they set the first timer
using nm_timeo and makes the second timer larger than the first one.
Reported by: jwd
Tested by: jwd
Reviewed by: jhb
MFC after: 2 weeks
of the same lock_owner4 string. As such, the handling of cleanup
of lock_owners could be simplified. This simplification permitted
the client to do a ReleaseLockOwner operation when the process that
the lock_owner4 string represents, has exited. This permits the
server to release any storage related to the lock_owner4 string
before the associated open is closed. Without this change, it
is possible to exhaust a server's storage when a long running
process opens a file and then many child processes do locking
on the file, because the open doesn't get closed. A similar patch
was applied to the Linux NFSv4 client recently so that it wouldn't
exhaust a server's storage.
Reviewed by: zack
MFC after: 2 weeks
client. This does not change the client's behaviour, but prepares
the code so that nfsrpc_rellockown() can be called elsewhere in a
future commit.
MFC after: 2 weeks
head nfsc_defunctlockowner. This patch simply removes the code that
loops through this always empty list, since the code no longer does
anything useful. It should not have any effect on the client's
behaviour.
MFC after: 2 weeks
for the remove and rename operations. Some NFSv4 servers will
report NFSERR_GRACE for these operations. This patch changes
the behaviour of the client so that it handles NFSERR_GRACE
like NFSERR_DELAY for non-state related operations like
remove and rename. It also exempts the delegreturn operation
from handling within newnfs_request() for NFSERR_DELAY/NFSERR_GRACE
so that it can handle NFSERR_GRACE in the same manner as before.
This problem was resolved thanks to discussion with bfields at fieldses.org.
The problem was identified at the recent NFSv4 ineroperability
bakeathon.
MFC after: 2 weeks
Isilon has the concept of an in-memory exit-code ring that saves the last exit
code of a function and allows for stack tracing. This is very helpful when
debugging tough issues.
This patch is essentially a no-op for BSD at this point, until we upstream
the dexitcode logic itself. The patch adds DEXITCODE calls to every NFS
function that returns an errno error code. A number of code paths were also
reorganized to have single exit paths, to reduce code duplication.
Submitted by: David Kwan <dkwan@isilon.com>
Reviewed by: rmacklem
Approved by: zml (mentor)
MFC after: 2 weeks
to the lock_owner4 string that goes on the wire. Also, add
code to do a ReleaseLockOwner Op on the lock_owner4 string
before a Close. Apparently not all NFSv4 servers handle multiple
instances of the same lock_owner4 string, at least not in a
compatible way. This patch avoids having multiple instances,
except for one unusual case, which will be fixed by a future commit.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
mode attribute in as 0 when doing writes. The change adds
the Mode attribute plus the others except Owner and Owner_group
to the list requested by the NFSv4 Write Operation. This fixed
a problem where an executable file built by "cc" would get mode
0111 instead of 0755 for some NFSv4 servers.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
server replied NFS3ERR_JUKEBOX/NFS4ERR_DELAY to an rpc.
This affected both NFSv3 and NFSv4. Found during testing
at the recent NFSv4 interoperability Bakeathon.
MFC after: 2 weeks
