The change is intended to be fully transparent to the users.
Similarly to route(8) and netstat(8), arp can be build without
netlink by defining WITHOUT_NETLINK in make.conf.
Differential Revision: https://reviews.freebsd.org/D39720
The manual describes "if*" form only while kernel uses fnmatch(3)
and allows use for more versatile shell-like patterns.
Note that explicitly and provide an example.
MFC after: 3 days
Allow new features to be supported without changing the size of
existing structures.
Reviewed by: kib
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39777
The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437
The pseudo file systems (devfs, fdescfs, procfs, etc.) report total
and available blocks and inodes despite being synthetic with no
underlying storage device to which those values could be applied.
The current code of these file systems tends to report a fixed number
of total blocks but no free blocks, and in the case of procfs,
libprocfs, linsysfs also no free inodes.
This can be irritating in e.g. the "df" output, since 100% of the
resources seem to be in use, but it can also create warnings in
monitoring tools used for capacity management.
This patch makes these file systems return the same value for the
total and free parameters, leading to 0% in use being displayed by
"df". Since there is no resource that can be exhausted, this appears
to be a sensible result.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D39442
Some combinations of FAT12 file system parameters could cause a kernel
panic due to an unmapped access if the size of the FAT was larger than
the CPU page size. The reason is that FAT12 uses 3 bytes to store
2 FAT pointers, leading to partial FAT pointers at the end of buffers
of a size that is not a multiple of 3.
With a typical page size of 4 KB, this caused the FAT entry at byte
offsets 4095 and 4096 to cross the page boundary, with only the first
page mapped. This was fixed by adjusting the mapping to always cover
both bytes of each FAT entry.
Testing revealed 2 other inconsistencies that are fixed by this commit:
1) The calculation of the size of the data area did not take into
account the fact that the first two data block numbers are reserved
and that the data area starts with block 2. This could cause a
FAT12 file system created with the maximum supported number of
blocks to be incorrectly identified as FAT16.
2) The root directory does not take up space in the data area of a
FAT12 or FAT16 file system, since it is placed into a reserved
area outside of that data area. This commits makes stat() report
the logical size of the root directory, but with 0 blocks allocated
from the data area.
PR: 270587
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D39386
If we need to set MK_host_egacy=yes we might need to check it
in local.toolchain.mk so set it earlier in local.meta.sys.env.mk
Leave the default MK_host_egacy?=no in local.sys.mk so it can
be tested in Makefiles without concern for build mode.
Add all acpi tables to qemus acpi table loader. This passes the acpi
tables by fwcfg to the guest.
Reviewed by: markj
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38439
The hypervisor is aware of all system properties. For the guest bios
it's hard and complex to detect all system properties. For that reason,
it would be better if the hypervisor creates acpi tables instead of the
guest. Therefore, the hypervisor has to send the acpi tables to the
guest. At the moment, bhyve just copies the acpi tables into the guest
memory. This approach has some restrictions. You have to keep sure that
the guest doesn't overwrite them accidentally. Additionally, the size of
acpi tables is limited.
Providing a plain copy of all acpi tables by fwcfg isn't possible. Acpi
tables have to point to each other. So, if the guest copies the acpi
tables into memory by it's own, it has to patch the tables. Due to
different layouts for different acpi tables, there's no generic way to
do that. For that reason, qemu created a table loader interface. It
contains commands for the guest for loading specific blobs into guest
memory and patching those blobs.
This commit adds a qemu_loader class which handles the creation of qemu
loader commands. At the moment, the WRITE_POINTER command isn't
implement. It won't be required by bhyve's acpi table generation yet.
Reviewed by: markj
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38438
People often want estimates of how much of their pool is occupied
by metadata, but they end up using lots of text processing on zdb's
output to get it.
So let's just...provide it for them.
Now, zdb -bbbs will output something like:
Blocks LSIZE PSIZE ASIZE avg comp %Total Type
[...]
68 1.06M 272K 544K 8K 4.00 0.00 L6 Total
1.71K 212M 6.85M 13.7M 8K 30.91 0.00 L5 Total
1.71K 212M 6.85M 13.7M 8K 30.91 0.00 L4 Total
1.73K 214M 6.92M 13.8M 8K 30.89 0.00 L3 Total
18.7K 2.29G 111M 221M 11.8K 21.19 0.00 L2 Total
3.56M 454G 28.4G 56.9G 16.0K 15.97 0.19 L1 Total
308M 36.8T 28.2T 28.6T 95.1K 1.30 99.80 L0 Total
311M 37.3T 28.3T 28.6T 94.2K 1.32 100.00 Total
50.4M 774G 113G 291G 5.77K 6.85 0.99 Metadata Total
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#14746
Relevant/interesting changes:
* make.1: document seemingly unexplained Error code 6.
o compat.c: CompatDeleteTarget skip .PHONY targets to be
consistent with JobDeleteTarget.
o job.c: fix memory leak in handling sysv :from=to modifiers
o unit tests for .MAKE.META.IGNORE_{FILTER,PATHS,PATTERNS}
o var.c: fix parsing of unevaluated subexpressions with
unbalanced '{}'
o cond.c: reduce complexity of evaluating expressions
It became illegal to not have them as of
5f6df17775 ("vfs: validate that vop
vectors provide all or none fplookup vops") upstream.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes#14788
Not complete, but already shaves on some locking.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
API contract requires VOPs to handle EXDEV internally, worst case by
falling back to the generic copy routine. This broke with the recent
changes.
While here whack custom loop to lock 2 vnodes with vn_lock_pair, which
provides the same functionality internally. write start/finish around
it plays no role so got eliminated.
One difference is that vn_lock_pair always takes an exclusive lock on
both vnodes. I did not patch around it because current code takes an
exclusive lock on the target vnode. zfs supports shared-locking for
writes, so this serializes different calls to the routine as is, despite
range locking inside. At the same time you may notice the source vnode
can get some traffic if only shared-locked, thus once more this goes
the safer route of exclusive-locking. Note this should be patched to
use shared-locking for both once the feature is considered stable.
Technically the switch to vn_lock_pair should be a separate change, but
it would only introduce churn immediately whacked by the rest of the
patch.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by: Rubicon Communications, LLC ("Netgate")
Closes#14723
This is the historical (and still current) behavior, as well as that of
NetBSD, OpenBSD, illumos and Linux (getdents()/getdents64()).
Reviewed by: kib
MFC after: 3 days
When building tar for linux, just disable HAVE_READPASSPHRASE
in config_freebsd.h and libarchive will provide for readpassphrase
Otherwise the two conflict.
For DIRDEPS_BUILD we need Makefile.depend.options to
force libegacy to be built on older FreeBSD and non-FreeBSD hosts.
Add readpassphrase to libegacy to avoid the need for libbsd on Linux
src.opts.mk disable TESTS for host if MK_host_egacy is yes
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39766
This reverts commit 6433365490.
The error is not valid per api contract, it showed up as a regression
after 15f0b8c30915f0b8c309 ("zfs: merge openzfs/zfs@9cd71c860 (master)") and was
subsequently in d012836fb6 ("zfs: fix up EXDEV handling for
clone_range").
Sponsored by: Rubicon Communications, LLC ("Netgate")
