Commit Graph

61 Commits

Author SHA1 Message Date
Kevin Lo
5a1fac10af Remove unused variable count.
This variable is initialized but not used.
2012-02-27 16:10:26 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Ed Schouten
e78a5a3f2f Convert mlx(4) and mly(4) to si_drv1 instead of dev2unit(). 2009-04-18 07:36:38 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Stephane E. Potvin
29e6fa3a7f Make mlxcontrol work with more than one system drive:
- When searching for the next system drive, return the next one instead
  of always returning the first one.
- Plug fd lead and make sure that the MLX_NEXT_CHILD ioctl is called
  on the controller fd, not the disk's one.

While there, fix a cut-n-pase error in a warning.

Reviewed by:	jhb
Approved by:	kan (mentor)
MFC after:	1 month
2008-09-12 17:40:17 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Sam Leffler
aa083c3dc6 plug resource leak
Submitted by:	mdodd
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:58:53 +00:00
Sam Leffler
23691262f0 fix potential null ptr deref
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:55:09 +00:00
Sam Leffler
001ea8fba8 avoid null ptr deref
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:53:21 +00:00
Poul-Henning Kamp
23db907c0f Don't call mlx_free() i mlx_attach() in case of failure. Doing so
in mlx_attach_pci() is much cleaner.

Inspired by:	Coverity
2005-03-26 21:58:09 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Scott Long
a770030306 Change another pointer name that was missed in the previous commit.
Spotted by:	njl
2004-03-01 21:45:49 +00:00
Scott Long
d488190531 Check and free the actual pointer the was used in a malloc instead of
checking and freeing a different pointer that may or may not have been
assigned the same value.  This should fix panics under load that were
recently reported.
2004-03-01 21:27:14 +00:00
Colin Percival
caa32ef5c2 Don't free meo until we're finished using it.
Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor), scottl
2004-02-22 09:52:46 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Scott Long
1b4404f9ab Prepare for locking mlx(4) by cleaning up the use of busdma. No real
functional changes should result from this.
2003-09-02 08:30:31 +00:00
Scott Long
fc3e87b367 Don't provide a mutex in the S/G list dma tag since it will never be defered.
Fix some nearby style.
2003-08-09 23:07:21 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Bruce Evans
07e929da1c Fixed printf format errors in previous commit. %llu is no more suitable
than %u for printing signed 64-bit types.  It fails on different machines,
and has the wrong signdness.

Fixed old printf format error on the same line.  %u is not suitable for
printing 32-bit types on all machines.

"Fixed" format printf error in previous commit.  This file is not
formatted in KNF.  Partially restore bug for bug compatibility: indent
the printf args too much, but don't format them for 160-column terminals.
2002-03-18 23:38:16 +00:00
Warner Losh
8321855307 Formats that print the block number need to be changed from %u to
%llu due to recent changes in bio_pblkno's type.
2002-03-18 20:50:04 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Kris Kennaway
bf61e26696 Fix some signed/unsigned integer confusion, and add bounds checking of
arguments to some functions.

Obtained from:	NetBSD
Reviewed by:	peter
MFC after:	2 weeks
2001-09-10 11:28:07 +00:00
Mike Smith
15fd5d220f Driver modifications consistent with my other drivers to facilitate
the use of a single set of sources across 4.x and 5.x branches.

No significant code changes.
2001-06-25 04:32:31 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Matthew N. Dodd
9b11c7ba44 Avoid hardcoding the 'rid' and 'type' of the MEM/IOPORT resource.
Store the 'rid' and 'type' in the softc and use them in mlx.c:mlx_free().

EISA and MCA front ends will require this.

Approved by:	 msmith
2000-11-28 06:17:32 +00:00
David Malone
ca89ee278e Further use of M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	msmith
2000-11-18 15:21:22 +00:00
Mike Smith
786cd128a8 Add support for 2.x/3.x firmware adapters which are too old to have a
memory-mapped register window.  This closes the last known issue with
2.x vintage adapters.
2000-08-04 06:52:00 +00:00
Mike Smith
baff09db2c Change the way that scatter/gather list tables are allocated so that we
can use all of the s/g entries available on smaller cards.  This is
necessary if we want to be able to handle a non-page-aligned 64k transfer
on 2.x and 3.x firmware.

Fix a missing splx() that may have left us at splbio() for longer than
desired.

Reduce shadowing of controller-supplied parameters a little.
2000-05-06 08:54:33 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Mike Smith
5d278f5cf3 One minor bugfix:
- Free resources in all the possible attachment failure cases.

One critical bugfix:

 - Fix a race where it was possible to get out of synch with the log
   messages from the controller, if the controller hung up for any
   period of time (eg. while resetting a SCSI bus).  This would result
   in an endless string of console errors, bringing the machine to a
   halt.
2000-04-20 23:52:33 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Mike Smith
421f2f7d74 Add features required for basic userland management utility:
- implement user-initiated background drive rebuild
 - implement user-initiated background consistency check
 - log controller-initiated background rebuild/check operations

Try to fix the elusive "invalid log operation" bug, and panic if we do
hit this one in the hopes of getting better information.

Tidy up diagnostic messages.

Try to use disk_create/disk_destroy correctly.  This isn't working
properly yet, but it's not clear whose fault that is.
2000-04-11 02:52:46 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Mike Smith
da8bb3a3bf Update to the latest development version of the Mylex driver. Changes in
this version include:

 - Support for version 2.x firmware (2.42 or later recommended).  This
   means we are the only open-source driver supporting these adapters.
   This code has only been tested on a Digital KZPCA adapter in an Alpha
   system, but is believed to be correct.  NOTE: EISA adapters are not
   yet supported.

 - Support the BIOS/Firmware initialisation handshake protocol.  This
   allows the driver to bring the card up to operational state even if
   the BIOS can't be run (eg. if it's an x86 BIOS in an Alpha system).

 - A working command pasthrough interface.  This allows a user-space
   configuration tool (under development) to issue arbitrary commands
   to the controller or to devices in the system.
2000-03-18 02:01:37 +00:00
Mike Smith
b9256fe34e Fix the firmware build number output (again). 1999-12-25 01:45:22 +00:00
Mike Smith
1a5bb1b602 Cosmetic fix; get the firmware build code and customisation tag the
right way around.

Submitted by:	"Chris D. Faulhaber" <jedgar@fxp.org>
1999-12-24 07:04:23 +00:00
Mike Smith
9eee27f16d Updates resulting from new documentation from Mylex and some cleaning:
- Don't keep private copies of some of the data fields from the
   ENQUIRY and ENQUIRY2 commands.  Instead, standardise on the ENQUIRY2
   command for initial adapter information, and keep a copy of the entire
   structure.  Refer to it where appropriate.

 - Move all of the controller description functionality into a new
   function.  Print lots more controller data if bootverbose is set.
   Add knowledge of the DAC960 PR, PT, PTL0 and PRL controllers, rename
   the 960PTL -> PTL0 and 1100P -> 1100PVX.

 - Correctly terminate an error message.

The controller interface procedures have been reviewed against the
Mylex-supplied documentation; no changes appear necessary at this
time.
1999-12-22 01:21:28 +00:00