It was lost when tryforward appeared. Now ip[6]_tryforward will be enabled
only when sending redirects for corresponding IP version is disabled via
sysctl. Otherwise will be used default forwarding function.
PR: 221137
Submitted by: mckay@
MFC after: 2 weeks
On PowerPC (and possibly other architectures), that doesn't use
EARLY_AP_STARTUP, the config task queue may be used initialized.
This was observed while trying to mount the root fs from NFS, as
reported here: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=230168.
This patch has 2 main changes:
1- Perform a basic initialization of qgroup_config, similar to
what is done in taskqgroup_adjust, but simpler.
This makes qgroup_config ready to be used during NFS root mount.
2- When EARLY_AP_STARTUP is not used, call inm_init() and
in6m_init() right before SI_SUB_ROOT_CONF, because bootp needs
to send multicast packages to request an IP.
PR: Bug 230168
Reported by: sbruno
Reviewed by: jhibbits, mmacy, sbruno
Approved by: jhibbits
Differential Revision: D16633
The dtrace provider for UDP-Lite is modeled after the UDP provider.
This fixes the bug that UDP-Lite packets were triggering the UDP
provider.
Thanks to dteske@ for providing the dwatch module.
Reviewed by: dteske@, markj@, rrs@
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16377
TCP/IPv4 allows an implicit connection setup using sendto(), which
is used for TTCP and TCP fast open. This patch adds support for
TCP/IPv6.
While there, improve some tests for detecting multicast addresses,
which are mapped.
Reviewed by: bz@, kbowling@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16458
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
Fire UDP receive probes when a packet is received and there is no
endpoint consuming it. Fire the probe also if the TTL of the
received packet is smaller than the minimum required by the endpoint.
Clarify also in the man page, when the probe fires.
Reviewed by: dteske@, markj@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16046
This deduplicates the code a bit, and also implicitly adds missing
callout_stop() to in[6]_lltable_delete_entry() functions.
PR: 209682, 225927
Submitted by: hselasky (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4605
Simple fix to address panics relating to setting IPV6_TCLASS
with setsockopt(). The premise of this change is that it is
ok to call malloc with M_NOWAIT while holding a lock on the
in6p.
If it later turns out that it is not ok, then major surgery
will be required, as ip6_setpktopt() will have to be fixed
(as it also calls malloc with M_NOWAIT) which pulls in the
ip6_pcbopts(), ip6_setpktopts(), ip6_setpktopt() call chain.
Submitted by: Jason Eggnet
Reviewed by: rrs, transport, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16201
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
encap_lookup_t method can be invoked by IP encap subsytem even if none
of gif/gre/me interfaces are exist. Hash tables are allocated on demand,
when first interface is created. So, make NULL pointer check before
doing access to hash table.
PR: 229378
Using of rwlock with multiqueue NICs for IP forwarding on high pps
produces high lock contention and inefficient. Rmlock fits better for
such workloads.
Reviewed by: melifaro, olivier
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15789
It is possible that ifma_protospec becomes NULL in this function for
some entry, but it is still referenced and thus it will not unlinked
from the list. Then "restart" condition triggers and this entry with
NULL ifma_protospec will lead to page fault.
PR: 228982
of needed interface when many gre interfaces are present.
Remove rmlock from gre_softc, use epoch(9) and CK_LIST instead.
Move more AF-related code into AF-related locations. Use hash table to
speedup lookup of needed softc.
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
of needed interface when many gif interfaces are present.
Remove rmlock from gif_softc, use epoch(9) and CK_LIST instead.
Move more AF-related code into AF-related locations.
Use hash table to speedup lookup of needed softc. Interfaces
with GIF_IGNORE_SOURCE flag are stored in plain CK_LIST.
Sysctl net.link.gif.parallel_tunnels is removed. The removal was planed
16 years ago, and actually it could work only for outbound direction.
Each protocol, that can be handled by if_gif(4) interface is registered
by separate encap handler, this helps avoid invoking the handler
for unrelated protocols (GRE, PIM, etc.).
This change allows dramatically improve performance when many gif(4)
interfaces are used.
Sponsored by: Yandex LLC
Currently it has several disadvantages:
- it uses single mutex to protect internal structures. It is used by
data- and control- path, thus there are no parallelism at all.
- it uses single list to keep encap handlers for both INET and INET6
families.
- struct encaptab keeps unneeded information (src, dst, masks, protosw),
that isn't used by code in the source tree.
- matches are prioritized and when many tunneling interfaces are
registered, encapcheck handler of each interface is invoked for each
packet. The search takes O(n) for n interfaces. All this work is done
with exclusive lock held.
What this patch includes:
- the datapath is converted to be lockless using epoch(9) KPI.
- struct encaptab now linked using CK_LIST.
- all unused fields removed from struct encaptab. Several new fields
addedr: min_length is the minimum packet length, that encapsulation
handler expects to see; exact_match is maximum number of bits, that
can return an encapsulation handler, when it wants to consume a packet.
- IPv6 and IPv4 handlers are stored in separate lists;
- added new "encap_lookup_t" method, that will be used later. It is
targeted to speedup lookup of needed interface, when gif(4)/gre(4) have
many interfaces.
- the need to use protosw structure is eliminated. The only pr_input
method was used from this structure, so I don't see the need to keep
using it.
- encap_input_t method changed to avoid using mbuf tags to store softc
pointer. Now it is passed directly trough encap_input_t method.
encap_getarg() funtions is removed.
- all sockaddr structures and code that uses them removed. We don't have
any code in the tree that uses them. All consumers use encap_attach_func()
method, that relies on invoking of encapcheck() to determine the needed
handler.
- introduced struct encap_config, it contains parameters of encap handler
that is going to be registered by encap_attach() function.
- encap handlers are stored in lists ordered by exact_match value, thus
handlers that need more bits to match will be checked first, and if
encapcheck method returns exact_match value, the search will be stopped.
- all current consumers changed to use new KPI.
Reviewed by: mmacy
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15617
Per vnet(9), CURVNET_SET and CURVNET_RESTORE cannot be used as a single
statement for a conditional and CURVNET_RESTORE must be in the same
block as CURVNET_SET (or a subblock).
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Avoid the ugly unlock / lock of the inpcbinfo where we need to
figure out what kind of lock we hold by simply deferring the
operation to another context. (Also a small dependency for
converting the pcbinfo read lock to epoch)
r333175 updated the join_group functions, but not the leave_group ones.
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15393
Use LIST_FOREACH_SAFE in in6m_disconnect() since we're
deleting and freeing item from the membership list
while traversing the list.
Reviewed by: mmacy
Sponsored by: Netflix
based link-local address.
The default link local address for IPv6 is added as part of bringing the
network interface up. Move the call to "EVENTHANDLER_INVOKE(ifaddr_event,)"
from the SIOCAIFADDR_IN6 ioctl(2) handler to in6_notify_ifa() which should
catch all the cases of adding IPv6 based addresses to a network interface.
Add a witness warning in case the event handler is not allowed to sleep.
Reviewed by: network (ae), kib
Differential Revision: https://reviews.freebsd.org/D13407
MFC after: 1 week
Sponsored by: Mellanox Technologies
to sleep on commands to the NIC when updating multicast filters. More generally this permitted
driver's to use an sx as a softc lock. Unfortunately this change introduced a race whereby a
a multicast update would still be queued for deletion when ifconfig deleted the interface
thus calling down in to _purgemaddrs and synchronously deleting _all_ of the multicast addresses
on the interface.
Synchronously remove all external references to a multicast address before enqueueing for delete.
Reported by: lwhsu
Approved by: sbruno
to avoid a LOR on the multicast list lock in the freemoptions routines.
As it turns out, tcp_usr_detach can acquire the tcbinfo lock readonly.
Trying to wunlock the pcbinfo lock in that context has caused a number
of reported crashes.
This change unclutters in_pcbfree and moves the handling of wunlock vs
runlock of pcbinfo to the freemoptions routine.
Reported by: mjg@, bde@, o.hartmann at walstatt.org
Approved by: sbruno
is too big for the outgoing interface and no firewall is involed.
This problem was introduced in
https://svnweb.freebsd.org/changeset/base/324996
Thanks to Irene Ruengeler for finding the bug and testing the fix.
Reviewed by: kp@
MFC after: 3 days
Multicast incorrectly calls in to drivers with a mutex held causing drivers
to have to go through all manner of contortions to use a non sleepable lock.
Serialize multicast updates instead.
Submitted by: mmacy <mmacy@mattmacy.io>
Reviewed by: shurd, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14969
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
considered as originated by our host packet. And thus rcvif should be
NULL, since it is used by ipfw(4) to determine that packet was originated
from this host. Some of icmp6_reflect() consumers reuse mbuf and m_pkthdr
without resetting rcvif pointer. To avoid this always reset m_pkthdr.rcvif
pointer to NULL in icmp6_reflect(). Also remove such line and comment
describing this from icmp6_error(), since it does not longer matters.
PR: 227674
Reported by: eugen
MFC after: 1 week
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
- The two types must be type-punnable for shared members of ifr_ifru.
This allows compatibility accessors to be shared.
- There must be no padding gap between ifr_name and ifr_ifru. This is
assumed in tcpdump's use of SIOCGIFFLAGS output which attempts to be
broadly portable. This is true for all current architectures, but very
large (256-bit) fat-pointers could violate this invariant.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14910
currently on the queue. This prevents accidentally doubly-removing a DAD
entry from the queue, while also simplifying some of the logic in
nd6_dad_stop().
Reviewed by: ae, hrs, vangyzen
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D10943
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
Created GET_PKTOPT_EXT_HDR() and GET_PKTOPT_SOCKADDR() macros to
handle safely fetching options from in6p_outputopts, including
properly dealing with in6p locking and preparing memory for
sooptcopyout().
Changed the function signature of ip6_getpcbopt() to allow the
function to acquire and release locks on in6p as needed.
Submitted by: Jason Eggleston <jason@eggnet.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14619
through the lock-switching hoops.
A few of the INP lookup operations that lock INPs after the lookup do
so using this mechanism (to maintain lock ordering):
1. Lock lookup structure.
2. Find INP.
3. Acquire reference on INP.
4. Drop lock on lookup structure.
5. Acquire INP lock.
6. Drop reference on INP.
This change provides a slightly shorter path for cases where the INP
lock is uncontested:
1. Lock lookup structure.
2. Find INP.
3. Try to acquire the INP lock.
4. If successful, drop lock on lookup structure.
Of course, if the INP lock is contested, the functions will need to
revert to the previous way of switching locks safely.
This saves a few atomic operations when the INP lock is uncontested.
Discussed with: gallatin, rrs, rwatson
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D12911
Current arp/nd code relies on the feedback from the datapath indicating
that the entry is still used. This mechanism is incorporated into the
arpresolve()/nd6_resolve() routines. After the inpcb route cache
introduction, the packet path for the locally-originated packets changed,
passing cached lle pointer to the ether_output() directly. This resulted
in the arp/ndp entry expire each time exactly after the configured max_age
interval. During the small window between the ARP/NDP request and reply
from the router, most of the packets got lost.
Fix this behaviour by plugging datapath notification code to the packet
path used by route cache. Unify the notification code by using single
inlined function with the per-AF callbacks.
Reported by: sthaug at nethelp.no
Reviewed by: ae
MFC after: 2 weeks
ip6_calcmtu() only looks at the interface MTU if neither the TCP hostcache
nor the route provides an MTU. Update the routes so they do not provide
stale MTUs.
This fixes UNH IPv6 conformance test cases v6LC_4_1_08 and v6LC_4_1_09,
which use a RA to reduce the link MTU from 1500 to 1280.
Reported and tested by: Farrell Woods <Farrell_Woods@Dell.com>
Reviewed by: dab, melifaro
Discussed with: ae
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14257
icmp6_redirect_input() validates that a redirect packet came from the
current gateway for the respective destination. To do this, it compares
the source address, which has an embedded scope zone id, to the next-hop
address, which does not. If the address is link-local, which should be
the case, the comparison fails and the redirect is ignored.
Insert the scope zone id into the next-hop address so the comparison
is accurate.
Unsurprisingly, this fixes 35 UNH IPv6 conformance test cases.
Submitted by: Farrell Woods <Farrell_Woods@Dell.com> (initial revision)
Reviewed by: ae melifaro dab
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14254
Instead of returning pointer to the previous header, return its offset.
In frag6_input() use m_copyback() and determined offset to store next
header instead of accessing to it by pointer and assuming that the memory
is contiguous.
In rip6_input() use offset returned by ip6_get_prevhdr() instead of
calculating it from pointers arithmetic, because IP header can belong
to another mbuf in the chain.
Reported by: Maxime Villard <max at m00nbsd dot net>
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14158
Fix a pretty simple, yet pretty tragic typo: we should return IPPROTO_DONE,
not IPPROTO_NONE. With IPPROTO_NONE we will keep parsing the header chain
on an mbuf that was already freed.
Reported by: Maxime Villard <max at m00nbsd dot net>
MFC after: 3 days
Restore state 6. Many of the UNH tests end up exercising this
state, where we have a new neighbor cache entry and a new link-layer
entry is being created for it. The link-layer address is currently
unknown so the initial state of the "llentry" should remain initialized
to ND6_LLINFO_NOSTATE so that the ND code will send a solicitation.
Setting this to ND6_LLINFO_STALE implies that the link-level entry
is valid and can be used (but needs to be refreshed via the Neighbor
Unreachability state machine).
https://forums.freebsd.org/threads/64287/
Submitted by: Farrell Woods <Farrell_Woods@Dell.com>
Reviewed by: mjoras, dab, ae
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14059
When mbuf has M_FASTFWD_OURS flag, this means that a destination address
is our local, but we still need to pass scope zone violation check,
because protocol level expects that IPv6 link-local addresses have
embedded scope zone indexes. This should fix the problem, when ipfw is
used to forward packets to local address and source address of a packet
is IPv6 LLA.
Reported by: sbruno
MFC after: 3 weeks
When an interface has IFF_LOOPBACK flag in6_ifattach() tries to assing
IPv6 loopback address to this interface. It uses in6ifa_ifpwithaddr()
to check, that interface doesn't already have given address and then
uses in6_ifattach_loopback(). If in6_ifattach_loopback() fails, it just
exits and thus skips assignment of IPv6 LLA.
Fix this using in6ifa_ifwithaddr() function. If IPv6 loopback address is
already assigned in the system, do not call in6_ifattach_loopback().
PR: 138678
MFC after: 3 weeks
the first mbuf of the reassembled datagram should have a pkthdr.
This was discovered with cxgbe(4) + IPSEC + ping with payload more than
interface MTU. cxgbe can generate !M_WRITEABLE mbufs and this results
in m_unshare being called on the reassembled datagram, and it complains:
panic: m_unshare: m0 0xfffff80020f82600, m 0xfffff8005d054100 has M_PKTHDR
PR: 224922
Reviewed by: ae@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14009
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
This bring back r327293 from OpenBSD, with the important difference that
we are now getting it from their ip6_id.c file.
Obtained from: OpenBSD (CVS v1.3)
correct non-repetitive ID code, based on comments from niels provos.
- seed2 is necessary, but use it as "seed2 + x" not "seed2 ^ x".
- skipping number is not needed, so disable it for 16bit generator (makes
the repetition period to 30000)
Obtained from: OpenBSD (CVS rev. 1.2)
MFC after: 1 week
netinet6/ip6_id.c: niels kindly dropped clause 3/4 from the license.
I was looking at the wrong file. There is an important merge that must be
done before I can bring this change.
This file is supposed to be based on the OpenBSD CVS v1.6 but checking
the OpenBSD repository the license had already dropped the 2&3 clasues by
then. Catch up with the licensing.
Obtained from: OpenBSD (CVS 1.2)
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
clang does not know that two lookup calls will return the same
pointer, so it assumes correctly that using the old pointer
after dropping the reference to it is a bit risky.
that had the IPv6 fragmentation header:
o Neighbor Solicitation
o Neighbor Advertisement
o Router Solicitation
o Router Advertisement
o Redirect
Introduce M_FRAGMENTED mbuf flag, and set it after IPv6 fragment reassembly
is completed. Then check the presence of this flag in correspondig ND6
handling routines.
PR: 224247
MFC after: 2 weeks
This option was used in the early days to allow performance measurements
extrapolating the use of SCTP checksum offloading. Since this feature
is now available, get rid of this option.
This also un-breaks the LINT kernel. Thanks to markj@ for making me
aware of the problem.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
and other similar socket options.
Provide new control message SCM_TIME_INFO to supply information about
timestamp. Currently it indicates that the timestamp was
hardware-assisted and high-precision, for software timestamps the
message is not returned. Reserved fields are added to ABI to report
additional info about it, it is expected that raw hardware clock value
might be useful for some applications.
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12638
Defer the packet size check until after the firewall has had a look at it. This
means that the firewall now has the opportunity to (re-)fragment an oversized
packet.
This mirrors what the slow path does.
Reviewed by: ae
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12779
Violators may define _WANT_SOCKET and _WANT_UNPCB respectively and
are not guaranteed for stability of the structures. The violators
list is the the usual one: libprocstat(3) and netstat(1) internally
and lsof in ports.
In struct xunpcb remove the inclusion of kernel structure and add
a bunch of spare fields. The xsocket already has socket not included,
but add there spares as well. Embed xsockbuf into xsocket.
Sort declarations in sys/socketvar.h to separate kernel only from
userland available ones.
PR: 221820 (exp-run)
flowtable anymore (as flowtable was never considered to be useful in
the forwarding path).
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D11448
This macro allocates memory and, if malloc does not return NULL, copies
data into the new memory. However, it doesn't just check whether malloc
returns NULL. It also checks whether we called malloc with M_NOWAIT. That
is not necessary.
While it may be that malloc() will only return NULL when the M_NOWAIT flag
is set, we don't need to check for this when checking malloc's return
value. Further, in this case, the check was not completely accurate,
because it checked for flags == M_NOWAIT, rather than treating it as a bit
field and checking for (flags & M_NOWAIT).
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10942
in the icmp6_input() function.
When processing an ICMP6_ECHO_REQUEST, if IP6_EXTHDR_GET fails, it will
set nicmp6 and n to NULL. Therefore, we should condition our modification
to nicmp6 on n being not NULL.
And, when processing an ICMP6_WRUREQUEST in the (mode != FQDN) case, if
m_dup_pkthdr() fails, the code will set n to NULL. However, the very next
line dereferences n. Therefore, when m_dup_pkthdr() fails, we should
discontinue further processing and follow the same path as when m_gethdr()
fails.
Reported by: clang static analyzer
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10941
response.
Delete an unneeded rate limit for UDP under IPv6. Because ICMP6
messages have their own rate limit, it is unnecessary to apply a
second rate limit to UDP messages.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10387
if it is called on a TCP socket
* with an IPv6 address and the socket is bound to an
IPv4-mapped IPv6 address.
* with an IPv4-mapped IPv6 address and the socket is bound to an
IPv6 address.
Thanks to Jonathan T. Leighton for reporting this issue.
Reviewed by: bz gnn
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9163
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
compiled into the kernel
This ensures that .iss_asm (the number of ASM listeners) isn't incorrectly
decremented for MLD-layer source datagrams when inspecting im*s_st[1]
(the second state in the structure).
MFC after: 2 months
PR: 217509 [1]
Reported by: Coverity (Isilon)
Reviewed by: ae ("This patch looks correct to me." [1])
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: Dell EMC Isilon
Rename the mtu variable in ip6_fragment(), because mtu is misleading. The
variable actually holds the fragment length.
No functional change.
Suggested by: ae
When forwarding pf tracks the size of the largest fragment in a fragmented
packet, and refragments based on this size.
It failed to ensure that this size was a multiple of 8 (as is required for all
but the last fragment), so it could end up generating incorrect fragments.
For example, if we received an 8 byte and 12 byte fragment pf would emit a first
fragment with 12 bytes of payload and the final fragment would claim to be at
offset 8 (not 12).
We now assert that the fragment size is a multiple of 8 in ip6_fragment(), so
other users won't make the same mistake.
Reported by: Antonios Atlasis <aatlasis at secfu net>
MFC after: 3 days
do for streaming sockets.
And do more cleanup in the sbappendaddr_locked_internal() to prevent
leak information from existing mbuf to the one, that will be possible
created later by netgraph.
Suggested by: glebius
Tested by: Irina Liakh <spell at itl ua>
MFC after: 1 week
When checksums of received IP and UDP header already checked, UDP uses
sbappendaddr_locked() to pass received data to the socket.
sbappendaddr_locked() uses given mbuf as is, and if NIC supports checksum
offloading, mbuf contains csum_data and csum_flags that were calculated
for already stripped headers. Some NICs support only limited checksums
offloading and do not use CSUM_PSEUDO_HDR flag, and csum_data contains
some value that UDP/TCP should use for pseudo header checksum calculation.
When L2TP is used for tunneling with mpd5, ng_ksocket receives mbuf with
filled csum_flags and csum_data, that were calculated for outer headers.
When L2TP header is stripped, a packet that was tunneled goes to the IP
layer and due to presence of csum_flags (without CSUM_PSEUDO_HDR) and
csum_data, the UDP/TCP checksum check fails for this packet.
Reported by: Irina Liakh <spell at itl ua>
Tested by: Irina Liakh <spell at itl ua>
MFC after: 1 week
If a jail has an explicitly assigned IPv6 loopback address then allow it
to be used instead of remapping requests for the loopback adddress to the
first IPv6 address assigned to the jail.
This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.
This is the same fix applied to IPv4 fix by: r316313
Also:
* Correct the description of prison_check_ip6_locked to match the code.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
ip_forward, TCP/IPv6, and probably SCTP leaked references to L2 cache
entry because they used their own routes on the stack, not in_pcb routes.
The original model for route caching was callers that provided a route
structure to ip{,6}input() would keep the route, and this model was used
for L2 caching as well. Instead, change L2 caching to be done by default
only when using a route structure in the in_pcb; the pcb deallocation
code frees L2 as well as L3 cacches. A separate change will add route
caching to TCP/IPv6.
Another suggestion was to have the transport protocols indicate willingness
to use L2 caching, but this approach keeps the changes in the network
level
Reviewed by: ae gnn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10059
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.
The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.
This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.
Reviewed by: adrian, aw
Approved by: ae (mentor)
Sponsored by: rsync.net
Differential Revision: D9235
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
and csum_flags using information from all fragments. This fixes
dropping of reassembled packets due to wrong checksum when the IPv6
checksum offloading is enabled on a network card.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.
SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.
To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.
Reported by: tuexen
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D9538
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.
The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.
This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.
Sponsored-by: rsync.net
Differential Revision: D9235
Reviewed-by: adrian
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
(intentionally) deleted first and then completely added again (so all the
events, announces and hooks are given a chance to run).
This cause an issue with CARP where the existing CARP data structure is
removed together with the last address for a given VHID, which will cause
a subsequent fail when the address is later re-added.
This change fixes this issue by adding a new flag to keep the CARP data
structure when an address is not being removed.
There was an additional issue with IPv6 CARP addresses, where the CARP data
structure would never be removed after a change and lead to VHIDs which
cannot be destroyed.
Reviewed by: glebius
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.
- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.
- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().
- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.
- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.
- How rate limiting works:
1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.
2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.
3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.
4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.
Reviewed by: wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision: https://reviews.freebsd.org/D3687
Sponsored by: Mellanox Technologies
MFC after: 3 months
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:
o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).
In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.
Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.
This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.
There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.
Reviewed by: adrian, gnn
Differential Revision: https://reviews.freebsd.org/D9171
The caller may unlink a prefix before purging referencing addresses. An
identical assertion in nd6_prefix_del() verifies that the addresses are
purged before the prefix is freed.
PR: 215372
X-MFC With: r306829
This can lead to change of mbuf pointer (packet filter could do m_pullup(),
NAT, etc). Also in case of change of destination address, tryforward can
decide that packet should be handled by local system. In this case modified
mbuf can be returned to the ip[6]_input(). To handle this correctly, check
M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present,
update variables that depend from mbuf pointer and skip another inbound
firewall processing.
No objection from: #network
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D8764
Add rcvif local variable to keep inbound interface pointer. Count
ifs6_in_discard errors in all "goto bad" cases. Now it will count
errors even if mbuf was freed. Modify all places where m->m_pkthdr.rcvif
is used to use local rcvif variable.
Obtained from: Yandex LLC
MFC after: 1 month
for IPv6.
It gets performance benefits from reduced number of checks. It doesn't
copy mbuf to be able send ICMPv6 error message, because it keeps mbuf
unchanged until the moment, when the route decision has been made.
It doesn't do IPsec checks, and when some IPsec security policies present,
ip6_input() uses normal slow path.
Reviewed by: bz, gnn
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D8527
The tools using to generate the sources has been updated and produces
different whitespaces. Commit this seperately to avoid intermixing
these with real code changes.
MFC after: 3 days
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
to the TCP user for both IPv4 and IPv6.
For IPv6 the TCP connected was dropped but errno wasn't set.
Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
This change extends the nd6 lock to protect the ND prefix list as well
as the list of advertising routers associated with each prefix. To handle
cases where the nd6 lock must be dropped while iterating over either the
prefix or default router lists, a generation counter is used to track
modifications to the lists. Additionally, a new mutex is used to serialize
prefix on-link/off-link transitions. This mutex must be acquired before
the nd6 lock and is held while updating the routing table in
nd6_prefix_onlink() and nd6_prefix_offlink().
Reviewed by: ae, tuexen (SCTP bits)
Tested by: Jason Wolfe <jason@llnw.com>,
Larry Rosenman <ler@lerctr.org>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D8125
It appears that this assertion can be tripped in some cases when
multiple interfaces are on the same link. Until this is resolved, revert a
part of r306305 and simply log a message if the DAD timer fires on a
non-tentative address.
Reported by: jhb
X-MFC With: r306305
In icmp6_reflect() use original source address of erroneous packet as
destination address for source selection algorithm when original
destination address is not one of our own.
Reported by: Mark Kamichoff <prox at prolixium com>
Tested by: Mark Kamichoff <prox at prolixium com>
MFC after: 1 week
