The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
If a file is specified in loader_conf_files that ends in '.lua', lualoader
will now load and execute that file. These may be used in place of a
traditional loader.conf to use more complicated logic, where some values
may be set based on others or based on the environment that the C bits has
left us with.
Lua scripts are run in a limited environment. In particular, it does not get
access to any modules or, in-fact, anything except environment variable.
A config.buildenv hook has been added so that a local module can add
whatever it may need to to the environment.
When a global var is set in the lua script, it does not immediately alter
the loader environment. Instead, the script's environment is initially
empty and processed only if the whole script executes successfully.
Effectively, a lua configuration file either takes effect or it does not,
an error will not leave it in a half-baked state.
Reviewed by: bcr (manpages), imp
Differential Revision: https://reviews.freebsd.org/D28450
In the lua loader, if one sets a password in loader.conf, the
autoboot_delay timer will start before the menu is displayed. One can
interrupt the autoboot and bring up the menu by entering a keyboard
character before the timer expires.
If this is done a prompt for the password is displayed. Entering the
password will bring up the menu, but the timer will again start and
another keyboard character must be entered or autoboot will abort the
menu and boot the system.
PR: 265472
Reviewed by: kevans
MFC after: 3 days
Usually the kernel is loaded later, but there are circumstances where it
could have been loaded earlier than changing BEs. Unload anything that
is already there so that we know we're using artifacts from the proper
environment.
PR: 265471
Reviewed by: kevans
MFC after: 3 days
To make auditing and debugging easier, export foo_load=XXX foo_name=yyy
etc to the loader env that we export to the kernel.
Original by: dhw
Sponsored by: Netflix
Discussed with: kevans
Differential Revsion: https://reviews.freebsd.org/D38466
This allows the "Multi user" in "[B]oot Multi user" to be substituted
with another string, for example with "Installer" in installer media.
Note that this is lua-only at the moment, since loader.4th's menu.rc
defines the alternate name as Boot [M]ulti User, unlike lualoader which
leaves it as [B]oot Multi user. Ideally loader.4th would adopt the newer
and simpler lualoader behaviour and then it could gain support for this
option, but loader.4th is on the way out and isn't used by any official
installer media so this is not a significant concern.
Reviewed by: kevans, rpokala
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36418
UEFI provides a protocol for accessing randomness. This is a good way
to gather early entropy, especially when there's no driver for the RNG
on the platform (as is the case on the Marvell Armada8k (MACCHIATObin)
for now).
If the entropy_efi_seed option is enabled in loader.conf (default: YES)
obtain 2048 bytes of entropy from UEFI and pass is to the kernel as a
"module" of name "efi_rng_seed" and type "boot_entropy_platform"; if
present, ingest it into the kernel RNG.
Submitted by: Greg V
Reviewed by: markm, kevans
Approved by: csprng (markm)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20780
Otherwise on fs like tftp where no directory listing is possible we fail
on the .dir method.
Reviewed by: imp, kevans
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33414
When the timer drops from double to single digits, a spare 'e' is left
on the end of the line as we don't overwrite it. Include an extra space
at the end to account for this and overwrite the leftover character.
PR: 259429
MFC after: 3 days
Reviewed by: emaste
The behavior remains the same, but lualoader now uses the more concise
verbiage that forthloader used. This is particularly important because
the previous line would exceed the right boundary of the menu and run
straight into space that would typically be allowed for the logo.
This makes it slightly easier to port logos from forthloader to
lualoader.
disable-device fooX will set hint.foo.X.disabled=1 as a way to easily
disable a device attaching during boot.
Reviewed by: tsoome
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31297
As we output spaces around the menu title, we should also check,
if the title is actually empty string.
PR: 255299
Submitted by: Jose Luis Duran
Reported by: Jose Luis Duran
MFC after: 1 week
Add a dummy vendor menu entry on the main welcome menu. Vendors can override
this in their local.lua file to create whatever sub-menu they need for their
products.
Also fix the adding a 'welcome' entry as well based on a suggestion from Kyle.
Silly option menu code also from Kyle. They seem to work for me, but any
transcription error is likely mine.
Reviewed by: kevans@ (the vendor stuff)
We use ascii box chars with serial console because we do not know
if terminal can draw unixode box chars. Same problem is about userboot
console.
MFC after: 5 days
BORDER_PIXELS is left over from picking up the source from illumos
port. Since FreeBSD VT does not use border in terminal size
calculation, there is no reason why should loader use it.
MFC after: 1 week
According to the Lua 5.4 manual section 6.4.1 ("Patterns"), the interaction
between ranges and classes is not defined and hyphens must be specified at
either the beginning or the end of a set if they are not escaped.
Move all such occurrences to the beginning.
Reported-by: _parv (twitter)
MFC-after: 3 days
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
lualoader was previously not processing \ as escapes; this commit fixes
that and does better error checking on the value as well.
Additionally, loader.conf had some odd restrictions on values that make
little sense. Previously, lines like:
kernel=foo
Would simply be discarded with a malformed line complaint you might not
see unless you disable beastie.
lualoader tries to process these as well as it can and manipulates the
environment, while forthloader did minimal processing and constructed a
`set` command to do the heavy lifting instead. The lua approach was
re-envisioned from building a `set` command so that we can appropriately
reset the environment when, for example, boot environments change.
Lift the previous restrictions to allow unquoted values on the right hand
side of an expression. Note that an unquoted value is effectively:
[A-Za-z0-9-][A-Za-z0-9-_.]*
This commit also stops trying to weirdly limit what it can handle in a
quoted value. Previously it only allowed spaces, alphanumeric, and
punctuation, which is kind of weird. Change it here to grab as much as it
can between two sets of quotes, then let processEnvVar() do the needful and
complain if it finds something malformed looking.
My extremely sophisticated test suite is as follows:
<<EOF
X_01_simple_string="simple"
X_02_escaped_string="s\imple"
X_03_unquoted_val=3
X_04_unquoted_strval=simple_test
X_05_subval="${X_03_unquoted_val}"
X_06_escaped_subval="\${X_03_unquoted_val}"
X_07_embedded="truth${X_03_unquoted_val}"
X_08_escaped_embedded="truth\${X_03_unquoted_val}"
X_09_unknown="${unknown_val}"
X_10_unknown_embedded="truth${unknown_val}"
X_11_crunchy="crunch$unknown_val crunch"
X_12_crunchy="crunch${unknown_val}crunch"
Y_01_badquote="te"lol"
Y_02_eolesc="lol\"
Y_02_noteolesc="lol\\"
Y_03_eolvar="lol$"
Y_03_noteolvar="lol\$"
Y_04_badvar="lol${"
exec="echo Done!"
EOF
Future work may provide a stub loader module in userland so that we can
formally test the loader scripts rather than sketchy setups like the above
in conjunction with the lua-* tools in ^/tools/boot.
This fixes the positioning of the "Welcome to FreeBSD" heading, which was
misplaced after the recent update to Lua 5.4. The issue was previously
masked by a compatibility knob in Lua 5.3 that would cause float-tagged
numbers to render faithfully without the decimal component. Lua 5.4 dropped
that and ensures that it always prints a decimal component, even if it has
to append a ".0" to the value.
Standard division produces a "float", floor division (//) can be used to
guarantee an integer. Floating point operations have been completely ripped
out of the liblua compiled for the bootloader, so this is a nop. This is
decidedly better than trying to hack out the float tag entirely.
Reported-by: mjg, probably others
MFC-after: 3 days
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
loader_conf_dirs is the supporting mechanism for the included
/boot/loader.conf.d directory. When lualoader finishes processing all of
the loader_conf_files it finds after walking /boot/defaults/loader.conf,
it will now check any and all loader_conf_dirs and process files ending
in ".conf" as if they were a loader.conf.
Note that loader_conf_files may be specified in a loader.conf.d config
file, but loader_conf_dirs may *not*. It will only be processed as specified
in /boot/defaults/loader.conf and any loader_conf_files that were loaded
from there.
Reviewed by: allanjude, freqlabs, rpokala, tsoome
Includes suggestion from: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25608
luacheck rightfully complains that i is unused in the show-module-options
loop at the end (it was used for some debugging in the process).
We've added a new pager module that's compiled in, so declare that as an
acceptable global.
This effectively dumps everything lualoader knows about to the console using
the libsa pager; that particular lua interface was added in r368591.
A pager stub implementation has been added that just dumps the output as-is
as a compat shim for older loader binaries that do not have lpager. This
stub should be moved into a more appropriate .lua file if we add anything
else that needs the pager.
Specifically, we have:
- enable-module
- disable-module
- toggle-module
These can be used to add/remove modules to be loaded or force modules to be
loaded in spite of modules_blacklist. In the typical case, a user is
expected to use them to recover an issue happening due to a module directive
they've added to their loader.conf or because they discover that they've
under-specified what to load.
MFC after: 1 week
In the previous world order, any brand/logo was forced to pull in the
drawer and call drawer.add{Brand,Logo} with the name their brand/logo is
taking and a table describing it.
In the new world order, these files just need to return a table that maps
out graphics types to a table of the exact same format as what was
previously being passed back into the drawer. The appeal here is not needing
to grab a reference back to the drawer module and having a cleaner
data-driven looking format for these. The format has been renamed to 'gfx-*'
prefixes and each one can provide a logo and a brand.
drawer.addBrand/drawer.addLogo will remain in place until FreeBSD 13, as
there's no overhead to them and it's not yet worth the break in
compatibility with any pre-existing brands and logos.
Reviewed by: freqlabs
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24966
Report what console the boot loader is telling the kernel to use:
o Dual (Serial Primary)
o Dual (Video Primary)
o Serial
o Video
This allows the user to interrupt the boot and tweak the cosnole, if
needed, in a trivial way. Useful for installs where the default
selected may not be quite what you want, or when you are running a
dual setup and need to toggle over to the other console being primary.
The 'c'/'C' keys will do the cycling through the consoles. Note:
you'll still have to drop into the loader to set details about serial
consoles. And this doesn't change the console the loader is using.
Reviewed by: kevans@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26573
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
The checkpoints are another way of keeping the state of ZFS.
During the rewind, the pool has to be exported.
This makes checkpoints unusable when using ZFS as root.
Add the option to rewind the ZFS checkpoint at the boot time.
If checkpoint exists, a new option for rewinding a checkpoint will appear in
the bootloader menu.
We fully support boot environments.
If the rewind option is selected, the boot loader will show a list of
boot environments that existed before the checkpoint.
Reviewed by: tsoome, allanjude, kevans (ok with high-level overview)
Differential Revision: https://reviews.freebsd.org/D24920
At least one user has landed in a scenario where logo files appear to be
misnamed, and we failed to find them. Our fallback for missing logodefs is
orb/orbbw, based on the color status. In a scenario where we can't locate
the logos, though, this is not ideal. Add in one more layer of fallback
to properly just don't draw any logo if the fan has been jam packed with
foreign material.
PR: 246046
MFC after: 3 days
The previous interface was pretty bad, and required the caller to get some
implementation details correct that it really shouldn't need to (e.g.
loader_conf_files handling) and pass in an empty table for it to use.
The new and much improved interface, readConf, is much less of a hack;
hiding these implementation details and just doing the right thing.
config.lua will now use it to process /boot/defaults/loader.conf and the
subsequent loader_conf_files from there, and read-conf will also use it.
This improvement submitted by Olivier (cited below), loader_conf_files
handling from the original patch was changed to just clobber it before
processing and not bother restoring it after the fact following r360505
where it's now guaranteed to evade the loader environment.
PR: 244640
Submitted by: Olivier Certner (olivier freebsd free fr>
This new table should be used for transient values that don't need to end up
in the loader environment. Generally, these will be things that are internal
details that really aren't needed or interesting outside of the config
module (e.g. if we changed how ${module}_* directives work, they might use
this instead).
To start, populate it with loader_conf_files. Any specific value of
loader_conf_files isn't all that interesting; if we're going to export it,
we should really instead export a loader_conf_files that indicates all of
the configuration files we processed. This will be used to reduce
bookkeeping overhead in a future commit that cleans up readConfFiles.
While we're here, let's stylize these as functions instead of just raw text.
A future change may allow arbitrary data arguments to be passed some of
these, and the distinction is useful.
This makes sure that config.readConfFiles doesn't see a stale
loader_conf_files from before, in case the newly loaded file doesn't set it.
MFC after: 3 days
This is a straightforward match to the command used by many in forthloader;
it uses the newly-exported config.readConfFiles() to make sure that any
loader_conf_files gets done as appropriate.
PR: 244640
Submitted by: Olivier Certner <olivier freebsd free fr>
MFC after: 3 days
In the process, change it slightly: readConfFiles will take a string like
loader_conf_files in addition to the loaded_files table that it normally
takes. This is to facilitate the addition of a read-conf CLI command, which
will just pass in the single file to read and an empty table.
MFC after: 3 days
We don't actually need to fetch loader_conf_files as much as we do; we've
already fetched it once at the beginning, we only really need to fetch it
again after each file we've processed. If it changes, then we can stash that
off into our local prefiles.
While here, drop a note about the recursion so that I stop trying to
change it. It may very well make redundant some of the work we're doing, but
that's OK.
MFC after: 3 days
Make menu customizations easier by naming the entries and using the
names to build the table entries.
Reviewed by: kevans
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24527