queues lock such that it isn't held around the call to get_pv_entry(),
which calls uma_zalloc(). At the point of the call to get_pv_entry(), the
lock isn't necessary and holding it could lead to recursive acquisition,
which isn't allowed.
that the page's busy flag could be relied upon to synchronize access to the
pv list. I don't any longer. See, for example, the call to
pmap_insert_entry() from pmap_copy().)
(short) types for the port arg of inb() (rev.1.56). The warning started
working for u_short types with gcc-3.3. The pessimizations exposed
by this been fixed except for the cx and oltr drivers where the breakage
of the warning has been pushed to the drivers.
completenss. The pessimization is tiny compared with i/o port slowness
except on very old machines, but code that used signed short types for
i/o ports was unpessimized long ago, and the macro that detected it
recently started working for u_short types too. Use of bus space
should have made this moot long ago.
Not tested at runtime by: bde
completenss. The pessimization is tiny compared with i/o port slowness
except on very old machines, but code that used signed short types for
i/o ports was unpessimized long ago, and the macro that detected it
recently started working for u_short types too. Use of bus space
should have made this moot long ago.
Not tested at runtime by: bde
This change allows one to specify almost the complete traffic parameters
for IPoverATM channels through the routing table. Up to now we used
4 byte DL addresses (flag, vpi, vciH, vciL). This format is still allowed.
If the address is longer, however, the 5th byte is interpreted as the
traffic class (UBR, CBR, VBR or ABR) and the remaining bytes are the
parameters for this traffic class:
UBR: 0 byte or 3 byte PCR
CBR: 3 byte PCR
VBR: 3 byte PCR, 3 byte SCR, 3 byte MBS
ABR: 3 byte PCR, 3 byte MCR, 3 byte ICR, 3 byte TBE, 1 byte NRM,
1 byte TRM, 2 bytes ADTF, 1 byte RIF, 1 byte RDF and 1 byte CDF
A script to generate the corresponding 'route add' arguments will follow soon.
connection is to be established asynchronously, behave as in the
case of non-blocking mode:
- keep the SS_ISCONNECTING bit set thus indicating that
the connection establishment is in progress, which is the case
(clearing the bit in this case was just a bug);
- return EALREADY, instead of the confusing and unreasonable
EADDRINUSE, upon further connect(2) attempts on this socket
until the connection is established (this also brings our
connect(2) into accord with IEEE Std 1003.1.)
function prototypes. Use LIST_FOREACH instead of explicit loops.
The indentation of functions indendet by 4 space have been left alone.
2-space indented functions have been re-indented.
Eliminate a lot of checkes to make sure requests are not cross-device
which is unnecessary with the new layout. We know a sequential request
cannot possibly be cross-device because there is a reserved page between
the devices.
Remove a couple of comments which no longer are relevant.
i/o ports by calling the implementation-detail level below inb() and
outb() instead of inb() and outb(). Unpessimizing the types is too
hard since they are mainly used in microcode.
completenss. The pessimization is tiny compared with i/o port slowness
except on very old machines, but code that used signed short types for
i/o ports was unpessimized long ago, and the macro that detected it
recently started working for u_short types too. Use of bus space
should have made this moot long ago.
Not tested at runtime by: bde
- Build SGL's for ATA_PASSTHROUGH commands
- Fallback to using the sgl_offset when the opcode is unknown for building
SGL's/
- Add ioctl calls for adding and removing units.
- Define previously undefined AEN's
- Allocate memory for the ioctl payload in multiples of 512bytes.
MFC after: 1 week
need this for swapcontext(), KSE upcalls initiated from ast()
also need to save them so that we properly return the syscall
results after having had a context switch. Note that we don't
use r11 in the kernel. However, the runtime specification has
defined r8-r11 as return registers, so we put r11 in the context
as well. I think deischen@ was trying to tell me that we should
save the return registers before. I just wasn't ready for it :-)
o The EPC syscall code has 2 return registers and 2 frame markers
to save. The first (rp/pfs) belongs to the syscall stub itself.
The second (iip/cfm) belongs to the caller of the syscall stub.
We want to put the second in the context (note that iip and cfm
relate to interrupts. They are only being misused by the syscall
code, but are not part of a regular context).
This way, when the context is switched to again, we return to
the caller of setcontext(2) as one would expect.
o Deal with dirty registers on the kernel stack. The getcontext()
syscall will flush the RSE, so we don't expect any dirty registers
in that case. However, in thread_userret() we also need to save
the context in certain cases. When that happens, we are sure that
there are dirty registers on the kernel stack.
This implementation simply copies the registers, one at a time,
from the kernel stack to the user stack. NAT collections are not
dealt with. Hence we don't preserve NaT bits. A better solution
needs to be found at some later time.
We also don't deal with this in all cases in set_mcontext. No
temporay solution is implemented because it's not a showstopper.
The problem is that we need to ignore the dirty registers and we
automaticly do that for at most 62 registers. When there are more
than 62 dirty registers we have a memory "leak".
This commit is fundamental for KSE support.
sysctl:
- sysctlbyname("net.inet.ip.mfctable", ...)
- sysctlbyname("net.inet.ip.viftable", ...)
This change is needed so netstat can use sysctlbyname() to read
the data from those tables.
Otherwise, in some cases "netstat -g" may fail to report the
multicast forwarding information (e.g., if we run a multicast
router on PicoBSD).
* Bug fix: when sending IGMPMSG_WRONGVIF upcall to the multicast
routing daemon, set properly "im->im_vif" to the receiving
incoming interface of the packet that triggered that upcall
rather than to the expected incoming interface of that packet.
* Bug fix: add missing increment of counter "mrtstat.mrts_upcalls"
* Few formatting nits (e.g., replace extra spaces with TABs)
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
code used to call rtrequest(RTM_DELETE, ...). This is a problem, because
the function that just has called us (route_output)
is not really happy with the route it just is creating beeing ripped out
from under it. Unfortunately we also cannot return an error from
ifa_rtrequest. Therefore mark the route just as RTF_REJECT.
control whether to accept RAs per-interface basis.
the new stuff ensures the backward compatibility;
- the kernel does not accept RAs on any interfaces by default.
- since the default value of the flag bit is on, the kernel accepts RAs
on all interfaces when net.inet6.ip6.accept_rtadv is 1.
Obtained from: KAME
MFC after: 1 week
