counterpart also takes, i.e. "fdx" for "full-duplex", "flow" for
"flowcontrol", "hdx" for "half-duplex" as well as "loop" and "loopback"
for "hw-loopback".
MFC after: 1 week
Rather than duplicating the LLE_FREE_LOCKED() macro code in LLE_FREE(),
call it directly (like we do for the RT_* macros).
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
MFC After: 1 week
[1] Early 2010.
variable into two so that we can see on which one we are waiting.
This might also more properly propagate the update of the
flowclean_cycles flag and avoid "hangs" people were seeing.
Suggested by: rwatson [1]
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
Updated by: Mikolaj Golub (to.my.trociny gmail.com)
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC After: 1 week
[1] Early 2010, initial version.
isn't configurable in a meaningful way. This is for ifconfig(8) or
other tools not to change code whenever IFT_USB-like interfaces are
registered at the interface list.
Reviewed by: brooks
No objections: gavin, jkim
created in separated vnets. As a side-effect of having a separated
if_cloner instance for each vnet, all vlan ifnets created in a vnet
will be automatically destroyed when vnet teardown is initiated.
Disallow SIOCSETVLAN and SIOCGETVLAN ioctls on vlan ifnets which are
associated with physical ifnets residing in parent vnets.
This is an interim vlan-specific solution which will be superseded by a
more generic if_cloner V_irtualization change from p4. For nooptions
VIMAGE builds, this should be a no-op change.
Discussed with: bz
MFC after: 3 days
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
support in mii(4):
- Merge generic flow control advertisement (which can be enabled by
passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
IFM_FLOW isn't implemented as a global option via the "don't care
mask" but instead as a media specific option this. This has the
following advantages:
o allows flow control advertisement with autonegotiation to be
turned on and off via ifconfig(8) with the default typically
being off (though MIIF_FORCEPAUSE has been added causing flow
control to be always advertised, allowing to easily MFC this
changes for drivers that previously used home-grown support for
flow control that behaved that way without breaking POLA)
o allows to deal with PHY drivers where flow control advertisement
with manual selection doesn't work or at least isn't implemented,
like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
by setting MIIF_NOMANPAUSE
o the available combinations of media options are readily available
from the `ifconfig -m` output
- Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
- Change IFM_ETH_MASTER from being implemented as a global option via
the "don't care mask" to a media specific one as it actually is only
applicable to IFM_1000_T to date.
- Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
actually configure manually selected slave mode (like we also do in
the PHY specific implementations).
- Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
e1000phy(4) and ip1000phy(4) to use the generic flow control support
instead of home-grown solutions via IFM_FLAGs. This includes changing
these PHY drivers and smcphy(4) to no longer unconditionally advertise
support for flow control but only if the selected media has IFM_FLOW
set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
the contents of the BMSR via mii_phy_add_media() instead of hardcoding
them. The latter approach seems to have developed historically, besides
causing unnecessary code duplication it was also undesirable because
brgphy_mii_phy_auto() already based the capability advertisement on the
contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
just BCM5701. Apparently this was a misinterpretation of a workaround
in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
this doesn't mean we can't set these as well on other PHYs for manual
media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
IFM_1000_T master mode support now is generally available with all PHY
drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
not applicable there.
Reviewed by: yongari (plus additional testing)
Obtained from: NetBSD (partially), OpenBSD (partially)
MFC after: 2 weeks
bug (incorrect placement of __start_SECNAME in some cases) that was
fixed in r210245.
There is already an UPDATING entry about needing a recent ld.
MFC after: 1 month
When a fast machine first brings up some non TCP networking program
it is quite possible that we will drop packets due to the fact that
only one packet can be held per ARP entry. This leads to packets
being missed when a program starts or restarts if the ARP data is
not currently in the ARP cache.
This code adds a new sysctl, net.link.ether.inet.maxhold, which defines
a system wide maximum number of packets to be held in each ARP entry.
Up to maxhold packets are queued until an ARP reply is received or
the ARP times out. The default setting is the old value of 1
which has been part of the BSD networking code since time
immemorial.
Expose the time we hold an incomplete ARP entry by adding
the sysctl net.link.ether.inet.wait, which defaults to 20
seconds, the value used when the new ARP code was added..
Reviewed by: bz, rpaulo
MFC after: 3 weeks
symbols of the set_vnet and set_pcpu sections, so those symbols will
always be emitted in kernel modules, if they use vnet.h or pcpu.h.
Also, for pcpu.h, make the __(start|stop)_set_pcpu declarations, and
associated macros invisible to userland, to prevent it picking up these
symbols.
Reviewed by: kib
enhancements (1). Switch to a standard 2-clause BSD license for this (2).
Unfortunately we have to un-static the ifindex_table for this but do not
publicly export it.
Suggested by: rwatson (1) a while back.
Approved by: thompsa (2) for the change from r204279.
MFC after: 6 days
- move all the chunks into one file, which allows to hide SIOCGIFCONF32
global definition as well.
- replace __amd64__ with proper COMPAT_FREEBSD32 around.
- handle 32bit capacity before going into the handler itself instead of
doing internal 32bit specific changes within it (e.g. as it's done for
SIOCGDEFIFACE32_IN6).
- use explicitely sized types for ABI compat.
Approved by: kib (mentor)
MFC after: 2 weeks
over all interfaces to make sure the address will neither change nor be
freed while we are working on it.
PR: kern/146250
Submitted by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 1 week
driver-maintained ifnet fields (such as if_drv_flags).
- Use soft locks as the mutex that protects each interface's knote list
rather than using the global knote list lock. Also, use the softc
for kn_hook instead of the cdev.
- Use mtx_sleep() instead of tsleep() when blocking in the read routines.
This fixes a lost wakeup race.
- Remove D_NEEDGIANT now that the cdevsw routines use the softc lock
where locking is needed.
- Lock IFQ when calculating the result for FIONREAD in tap(4). tun(4)
already did this.
- Remove remaining spl calls.
Submitted by: Marcin Cieslak saper of saper|info (3)
MFC after: 2 weeks
code associated with overflow or with the drain function. While this
function is not expected to be used often, it produces more information
in the form of an errno that sbuf_overflowed() did.
use '-' in probe names, matching the probe names in Solaris.[1]
Add userland SDT probes definitions to sys/sdt.h.
Sponsored by: The FreeBSD Foundation
Discussed with: rwaston [1]
bridge(4), lagg(4) etc. and make use of function pointers and
pf_proto_register() to hook carp into the network stack.
Currently, because of the uncertainty about whether the unload path is free
of race condition panics, unloads are disallowed by default. Compiling with
CARPMOD_CAN_UNLOAD in CFLAGS removes this anti foot shooting measure.
This commit requires IP6PROTOSPACER, introduced in r211115.
Reviewed by: bz, simon
Approved by: ken (mentor)
MFC after: 2 weeks
interfaces to be a vlan (IFT_L2VLAN) rather than an Ethernet interface
(IFT_ETHER). The code already fixed if_type in the ifnet causing some
places to report the interface as a vlan (e.g. arp -a output) and other
places to report the interface as Ethernet (getifaddrs(3)). Now they
should all report IFT_L2VLAN.
Reviewed by: brooks
MFC after: 1 month
either find an existing entry, or allocate a new one. In the latter
case an entry would have flags, that were supplied as argument to
lla_lookup(). In case of an existing entry, flags aren't modified.
This lead to losing LLE_PUB and/or LLE_PROXY flags.
We should apply these flags either in lla_rt_output() or in the
in.c:in_lltable_lookup(). It seems to me that lla_rt_output() is
a more correct choice.
PR: kern/148784, kern/146539
Silence from: qingli, 5 days
- Allow setting format, resolution and accuracy of BPF time stamps per
listener. Previously, we were only able to use microtime(9). Now we can
set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command.
Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP
command. Document all supported options in bpf(4) and their uses.
- Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'.
The new time stamp has both 64-bit second and fractional parts. bpf_xhdr
has this time stamp instead of 'struct timeval' for bh_tstamp. The new
structures let us use bh_tstamp of same size on both 32-bit and 64-bit
platforms without adding additional shims for 32-bit binaries. On 64-bit
platforms, size of BPF header does not change compared to bpf_hdr as its
members are already all 64-bit long. On 32-bit platforms, the size may
increase by 8 bytes. For backward compatibility, struct bpf_hdr with
struct timeval is still the default header unless new time stamp format is
explicitly requested. However, the behaviour may change in the future and
all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now.
- Add experimental support for tagging mbufs with time stamps from a lower
layer, e.g., device driver. Currently, mbuf_tags(9) is used to tag mbufs.
The time stamps must be uptime in 'struct bintime' format as binuptime(9)
and getbinuptime(9) do.
Reviewed by: net@
interface when tearing down a vlan interface. If a trunk interface is
detached, all of its multicast addresses are removed before the ifnet
departure eventhandlers are invoked. This means that all of the multicast
addresses are removed before the vlan interfaces are removed which causes
the if_delmulti() calls in the vlan teardown to fail.
In the VLAN_ARRAY case, this left vlan interfaces referencing a no longer
valid parent interface. In the !VLAN_ARRAY case, the eventhandler gets
stuck in an infinite loop retrying vlan_unconfig_locked() forever. In
general the callers of vlan_unconfig_locked() do not expect nor handle
failure, so I believe it is safer to ignore the errors and tear down as
much of the vlan state as possible.
Silence from: net@
MFC after: 4 days
We cannot expect that modspace is the last entry in the linker
set and thus that modspace + possible extra space up to PAGE_SIZE
would be contiguous. For the moment do not support more than
*_MODMIN space and ignore the extra space (*).
(*) We know how to get it back but it'll need testing.
Discussed with: jeff, rwatson (briefly)
Reviewed by: jeff
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 4 days
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
"Whitspace" churn after the VIMAGE/VNET whirls.
Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.
Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.
This also removes some header file pollution for putatively
static global variables.
Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.
Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days
Add missing CURVNET_RESTORE() calls for multiple code paths, to stop
leaking the currently cached vnet into callers and to the process.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 4 days
bd_compat32 field of struct bpf_d is kept unconditionally to not
impose the requirement of including "opt_compat.h" on all numerous
users of bpfdesc.h.
Submitted by: jhb (version for 6.x)
Reviewed and tested by: emaste
MFC after: 2 weeks
interface considers that it hits a fatal error, and will not copyout
the request structure back for _IOW and _IOWR ioctls, keeping them
untouched.
The previous implementation of the SIOCGIFDESCR ioctl intends to
feed the buffer length back to userland. However, if we return
an error, the feedback would be defeated and ifconfig(8) would
trap into an infinite loop.
This commit changes SIOCGIFDESCR to set buffer field to NULL to
indicate the previous ENAMETOOLONG case.
Reported by: bschmidt
MFC after: 2 weeks
to remove it to avoid panics in case of two threads trying to remove it in
parallel.
PR: kern/116837
Submitted by: Takahiro Kurosawa (takahiro.kurosawa gmail.com) (orig version)
MFC after: 10 days
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
dom_ifdetach() calls as they might sleep for callout_drain().
Do as we do in if_attachdomain1() [r121470] and handle
if_afdata_initialized earlier and call dom_ifdetach() unlocked.
Discussed with: rwatson
MFC after: 10 days
has actually succeeded to initialize and attach. There is a theoretical
possibility to drop out early in if_attachdomain1() leaving the array
uninitialized if we cannot get the lock.
Discussed with: rwatson
MFC after: 10 days
- increase flow cleaning frequency and decrease flow caching time
when near the flow limit
- stop allocating new flows when within 3% of maxflows don't start
allocating again until below 12.5%
MFC after: 7 days
that provides the allocated and setup eventhandler entry.
Add a new wrapper for VIMAGE that allocates extra space to hold the
callback function and argument in addition to an extra wrapper function.
While the wrapper function goes as normal callback function the
argument points to the extra space allocated holding the original func
and arg that the wrapper function can then call.
Provide an iterator function for the virtual network stack (vnet) that
will call the callback function for each network stack.
Provide a new set of macros for VNET that in the non-VIMAGE case will
just call eventhandler_register() while in the VIMAGE case it will use
vimage_eventhandler_register() passing in the extra iterator function
but will only register once rather than per-vnet.
We need a special macro in case we are interested in the tag returned
as we must check for curvnet and can neither simply assign the
return value, nor not change it in the non-vnet0 case without that.
Sponsored by: ISPsystem
Discussed with: jhb
Reviewed by: zec (earlier version), jhb
MFC after: 1 month
- show all lltables [1] (optional flag to also show the llentries as well)
- show lltable <struct lltable *>
- show llentry <struct llentry *>
MFC after: 6 days
if the interface has such capability. The interface
capability flag indicates whether such capability
exists. This approach is much more backward compatible.
Physical device driver changes will be part of another
commit.
Also updated the ifconfig utility to show the LINKSTATE
capability if present.
Reviewed by: rwatson, imp, juli
MFC after: 3 days
- Add a missing callout_drain(9) before the descriptor deallocation.[1]
- Prefer callout_init_mtx(9) over callout_init(9) and let the callout
subsystem handle the mutex for callout function.
PR: kern/144453
Submitted by: Alexander Sack (asack at niksun dot com)[1]
MFC after: 1 week
address as well as the transport protocol port information
from the outbound packets. The routing code is generic and
compares every byte in the given sockaddr object. Therefore
the temporary sockaddr objects must be cleared due to padding
bytes. In addition, the port information must be stripped
or the route search will either fail or return the incorrect
route entry.
Unit testing is done using OpenVPN over the if_tun interface.
MFC after: 7 days
- add a name argument to flowtable_alloc for printing with ddb commands
- extend ddb commands to print destination address or 4-tuples
- don't parse ports in ulp header if FL_HASH_ALL is not passed
- add kern_flowtable_insert to enable more generic use of flowtable
(e.g. system calls for adding entries)
- don't hash loopback addresses
- cleanup whitespace
- keep statistics per-cpu for per-cpu flowtables to avoid cache line contention
- add sysctls to accumulate stats and report aggregate
MFC after: 7 days
does not set or update the if_link_state variable.
As such RT_LINK_IS_UP() fails for the if_tap interface.
Also, the RT_LINK_IS_UP() needs to bypass all loopback
interfaces because loopback interfaces are considered
up logically as long as the system is running.
This patch fixes the above issues by setting and updating
the if_link_state variable when the tap interface is
opened or closed respectively. Similary approach is
already done in the if_tun device.
MFC after: 3 days
allow for connection load balancing across interfaces. Currently
the address alias handling method is colliding with the ECMP code.
For example, when two interfaces are configured on the same prefix,
only one prefix route is installed. So connection load balancing
among the available interfaces is not possible.
The other advantage of ECMP is for failover. The issue with the
current code, is that the interface link-state is not reflected
in the route entry. For example, if there are two interfaces on
the same prefix, the cable on one interface is unplugged, new and
existing connections should switch over to the other interface.
This is not done today and packets go into a black hole.
Also, there is a small bug in the kernel where deleting ECMP routes
in the userland will always return an error even though the command
is successfully executed.
MFC after: 5 days
radix table root nodes. This is only needed (and available)
in the virtualization case to free the resources when tearing
down a virtual network stack.
Sponsored by: ISPsystem
Reviewed by: julian, zec
MFC after: 5 days
or overflow the netisr queue and fall back to the interface
queue so that we can garuantee that the ifnet pointer stays
valid. Formerly we ended up with reference counts <= 0 in
case the netisr had returned ENOBUFS. The idea is to track
any packet in the netisr queue and only change the refount
on edge operations for the fallback interface queue. This
also avoids problems in case the if_snd.ifq_len lies to us.
Also rework refount assertions to make sure they trigger if
we go below 1. Formerly a negative refence count did not
trigger the assert as the refcount variable is u_int.
Sponsored by: ISPsystem
MFC after: 5 days
and tested over the past two months in the ipfw3-head branch. This
also happens to be the same code available in the Linux and Windows
ports of ipfw and dummynet.
The major enhancement is a completely restructured version of
dummynet, with support for different packet scheduling algorithms
(loadable at runtime), faster queue/pipe lookup, and a much cleaner
internal architecture and kernel/userland ABI which simplifies
future extensions.
In addition to the existing schedulers (FIFO and WF2Q+), we include
a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new,
very fast version of WF2Q+ called QFQ.
Some test code is also present (in sys/netinet/ipfw/test) that
lets you build and test schedulers in userland.
Also, we have added a compatibility layer that understands requests
from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries,
and replies correctly (at least, it does its best; sometimes you
just cannot tell who sent the request and how to answer).
The compatibility layer should make it possible to MFC this code in a
relatively short time.
Some minor glitches (e.g. handling of ipfw set enable/disable,
and a workaround for a bug in RELENG_7's /sbin/ipfw) will be
fixed with separate commits.
CREDITS:
This work has been partly supported by the ONELAB2 project, and
mostly developed by Riccardo Panicucci and myself.
The code for the qfq scheduler is mostly from Fabio Checconi,
and Marta Carbone and Francesco Magno have helped with testing,
debugging and some bug fixes.
Enhanced process coredump routines.
This brings in the following features:
1) Limit number of cores per process via the %I coredump formatter.
Example:
if corefilename is set to %N.%I.core AND num_cores = 3, then
if a process "rpd" cores, then the corefile will be named
"rpd.0.core", however if it cores again, then the kernel will
generate "rpd.1.core" until we hit the limit of "num_cores".
this is useful to get several corefiles, but also prevent filling
the machine with corefiles.
2) Encode machine hostname in core dump name via %H.
3) Compress coredumps, useful for embedded platforms with limited space.
A sysctl kern.compress_user_cores is made available if turned on.
To enable compressed coredumps, the following config options need to be set:
options COMPRESS_USER_CORES
device zlib # brings in the zlib requirements.
device gzio # brings in the kernel vnode gzip output module.
4) Eventhandlers are fired to indicate coredumps in progress.
5) The imgact sv_coredump routine has grown a flag to pass in more
state, currently this is used only for passing a flag down to compress
the coredump or not.
Note that the gzio facility can be used for generic output of gzip'd
streams via vnodes.
Obtained from: Juniper Networks
Reviewed by: kan
- Rename the netisr protocol registration array, 'np' to 'netisr_proto',
in order to reduce the chances of symbol name collisions. It remains
statically defined, but it will be looked up by netstat(1).
- Move certain internal structure definitions from netisr.c to
netisr_internal.h so that netstat(1) can find them. They remain
private, and should not be used for any other purpose (for example,
they should not be used by kernel modules, which must instead use the
public interfaces in netisr.h).
- Store a kernel-compiled version of NETISR_MAXPROT in the global variable
netisr_maxprot, and export via a sysctl, so that it is available for use
by netstat(1). This is especially important for crashdump
interpretation, where the size of the workstream structure is determined
by the maximum number of protocols compiled into the kernel.
MFC after: 1 week
Sponsored by: Juniper Networks
Do not do additional dev_ref() on the newly created interface in the
if_clone create method [1]. This reference is not needed and never
removed, causing struct cdevpriv leakage. Remove the setting of
SI_CHEAPCLONE flag as well, since it is unused.
For dev_clone handlers, create cdevs with the call make_dev_credf(MAKEDEV_REF)
instead of calling make_dev() and then dev_ref(), to avoid a race.
Call drain_dev_clone_events() at the module unload time after dev_clone
handler is deinstalled.
Submitted by: Mikolaj Golub <to.my.trociny gmail com> [1]
MFC after: 1 week
counters have not gone about MAXCPU or NETISR_MAXPROT. These problems
caused panics on UP kernels with INVARIANTS when using sysctl -a, but
would also have caused problems for 32-core boxes or if the netisr
protocol vector was fully populated.
Reported by: nwhitehorn, Neel Natu <neelnatu@gmail.com>
MFC after: 4 days
