Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
- Allow the userland hypervisor to intercept breakpoint exceptions
(BP#) in the guest. A new capability (VM_CAP_BPT_EXIT) is used to
enable this feature. These exceptions are reported to userland via
a new VM_EXITCODE_BPT that includes the length of the original
breakpoint instruction. If userland wishes to pass the exception
through to the guest, it must be explicitly re-injected via
vm_inject_exception().
- Export VMCS_ENTRY_INST_LENGTH as a VM_REG_GUEST_ENTRY_INST_LENGTH
pseudo-register. Injecting a BP# on Intel requires setting this to
the length of the breakpoint instruction. AMD SVM currently ignores
writes to this register (but reports success) and fails to read it.
- Rework the per-vCPU state tracked by the debug server. Rather than
a single 'stepping_vcpu' global, add a structure for each vCPU that
tracks state about that vCPU ('stepping', 'stepped', and
'hit_swbreak'). A global 'stopped_vcpu' tracks which vCPU is
currently reporting an event. Event handlers for MTRAP and
breakpoint exits loop until the associated event is reported to the
debugger.
Breakpoint events are discarded if the breakpoint is not present
when a vCPU resumes in the breakpoint handler to retry submitting
the breakpoint event.
- Maintain a linked-list of active breakpoints in response to the GDB
'Z0' and 'z0' packets.
Reviewed by: markj (earlier version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20309
The !USE_OPENSSL_CRYPTO_RAND path uses arc4random_buf() correctly.
In general, we should prefer to avoid things OpenSSL does poorly when a good
alternative exists in libc.
This doesn't appear to have some active upstream (and it's a steaming pile of
bad 90s crypto design). Rip out the completely horrible bits and leave the
only mildly less horrible bits. The whole thing should probably be deleted; to
the extent it purports to provide a security feature: it doesn't.
<sys.mk> defines ECHO=echo when not using make -s, and ECHO=true when using
make -s.
export ECHO for ntp products and use it in the mkver script to echo the
version. This suppresses the output as appropriate. ECHO is given a default
value to make sure things still work as expected for anyone that isn't
redefining ECHO.
Reviewed by: cy
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22101
VFs return zero for the memory enable bit even if it has been set by a
prior write. After r348779 this caused the annoying behavior that a
guest OS would unintentionally disable memory decoding on a future
read-modify-write operation on the command register. Instead, return
the shadow value of the command register for reads. This ensures that
the guest will only toggle the state of the memory enable bit when it
specifically intends to do so.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
Previously kbdmap had a localized menu heading ("Choose your keyboard
layout") but not the dialog title ("Keyboard Menu").
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Some of the printf statements only use LF to get a newline. However, a CR character is also required for the serial console to print debug logs in a nice way.
Fix those code locations that only use LF, by adding a CR character.
Reviewed by: markj, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22552
When using sysrc to modify a file, the file should be created silently.
However, with the introduction of SVN r335280, an error of "No such file
or directory" would appear despite everything else working as-expected.
The nature of this spurious error is that SVN r335280 did not check if
the file exists first, before trying to fixup the line-endings in the
file just prior to modification.
PR: bin/240875
Reported by: Jose Luis Duran
MFC after: 3 days
foreground.
This allows a separate process to monitor when and how those programs exit.
That process can then restart them if needed.
Submitted by: Alex Burlyga
Reviewed by: bcr, imp
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22474
This reapplies the RISC-V GNU ld workaround from r354896, r354899, and
354900, along with a fix for the build failure during cleandir.
LINKER_TYPE was not being set during cleandir, resulting in
Malformed conditional (${LINKER_TYPE} == "bfd" && ${MACHINE} == "riscv")
from Cirrus-CI.
PR: 242109
Sponsored by: The FreeBSD Foundation
Add code to decode the BootCurrent and BootXXXX variable it points at
to deduce the ESP used to boot the system. By default, it prints the
path to that device. With --unix-path (-p) it will instead print the
current mount point for the ESP, if any (or an error). With
--device-path (-d) it wil print the UEFI device path for the ESP.
Note: This is the best guess based on the UEFI variables. If the ESP
is part of a gmirror, etc, that won't be reported. If by some weird
chance there was a complicated series of chain boots, this may not be
what you want. For setups that don't add layers on top of the raw
devices, it is accurate.
Differential Revision: https://reviews.freebsd.org/D22432
This patch fixes a race condition where the receive callback is called
while the device is being reset. Since the rx_merge variable may change
during reset, the receive callback may operate inconsistently with what
the guest expects.
Also, get rid of the unused rx_vhdrlen variable.
PR: 242023
Reported by: aleksandr.fedorov@itglobal.com
Reviewed by: markj, jhb
MFC with: r354552
Differential Revision: https://reviews.freebsd.org/D22440
error: operator '?:' has lower precedence than '|'; '|' will be evaluated first
I discovered this in CheriBSD after updating our fork of clang to the latest
upstream master.
Reviewed By: ian
Differential Revision: https://reviews.freebsd.org/D22433
Since st_birthtime doesn't exists on Linux (unless you use statx(2)), we
instead populate it with the st_ctime value.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22386
Instead of providing ioctl cmd value, which has no meaning to user,
print MSR number. The later is what the user expects in this place
even.
Reported by: pstef
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Instead of calloc()ing (and forgetting to free) in a tight loop, just put
this small array on the stack.
Reported by: Coverity
Coverity CID: 1331665
MFC after: 2 weeks
Sponsored by: Axcient
sesutil would allow the user to toggle an LED that was one past the maximum
element. If he tried, ENCIOC_GETELMSTAT would return EINVAL.
Reported by: Coverity
Coverity CID: 1398940
MFC after: 2 weeks
Sponsored by: Axcient
At the end of both mevent_add() and mevent_update(), mevent_notify()
is called to wakeup the I/O thread, that will call kevent(changelist)
to update the kernel.
A race condition is possible where the client calls mevent_add() and
mevent_update(EV_ENABLE) before the I/O thread has the chance to wake
up and call mevent_build()+kevent(changelist) in response to mevent_add().
The mevent_add() is therefore ignored by the I/O thread, and
kevent(fd, EV_ENABLE) is called before kevent(fd, EV_ADD), resuliting
in a failure of the kevent(fd, EV_ENABLE) call.
PR: 241808
Reviewed by: jhb, markj
MFC with: r354288
Differential Revision: https://reviews.freebsd.org/D22286
via 'diskinfo -v'. This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM. And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.
Reviewed by: allanjude, imp
Sponsored by: Klara Inc
Differential Revision: https://reviews.freebsd.org/D22249
Mergeable rx buffers is a virtio-net feature that allows the hypervisor
to use multiple RX descriptor chains to receive a single receive packet.
Without this feature, a TSO-enabled guest is compelled to publish only
64K (or 32K) long chains, and each of these large buffers is consumed
to receive a single packet, even a very short one. This is a waste of
memory, as a RX queue has room for 256 chains, which means up to 16MB
of buffer memory for each (single-queue) vtnet device.
With the feature on, the guest can publish 2K long chains, and the
hypervisor will merge them as needed.
This change also enables the feature in the netmap backend, which
supports virtio-net offloads. We plan to add support for the
tap backend too.
Note that differently from QEMU/KVM, here we implement one-copy receive,
while QEMU uses two copies.
Reviewed by: jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21007
If a VM is flooded with more ingress packets than the guest OS
can handle, the current virtio-net code will keep reading those
packets and drop most of them as no space is available in the
receive queue. This is an undesirable receive livelock, which
is a waste of CPU and memory resources and potentially opens to
DoS attacks.
With this change, virtio-net uses the new netbe_rx_disable()
function to disable ingress operation in the backend while the
guest is short on RX buffers. Once the guest makes more buffers
available to the RX virtqueue, ingress operation is enabled again
by calling netbe_rx_enable().
Reviewed by: bryanv, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20987
The valectl(4) program is used to manage vale(4) switches.
Add it to the system commands so that it can be used right away.
This program was previously called vale-ctl, and stored in
tools/tools/netmap
Reviewed by: hrs, bcr, lwhsu, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22146
whitespace, and also reorder the fields so they are easier to read on
an 80 column display (the lines wrapped even before these changes).
Also fix non-standard nomenclature in the Caps code, and update the
man page.
Reported by: rpokala