import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
locks: a global list/counter/generation counter protected by a new
mutex unp_list_lock, and a global linkage rwlock, unp_global_rwlock,
which protects the connections between UNIX domain sockets.
This eliminates conditional lock acquisition that was previously a
property of the global lock being held over sonewconn() leading to a
call to uipc_attach(), which also required the global lock, but
couldn't rely on it as other paths existed to uipc_attach() that
didn't hold it: now uipc_attach() uses only the list lock, which
follows the linkage lock in the lock order. It may also reduce
contention on the global lock for some workloads.
Add global UNIX domain socket locks to hard-coded witness lock
order.
MFC after: 1 week
Discussed with: kris
section of code, this uses WITNESS_NORELEASE() and WITNESS_RELEASEOK() to mark
the boundaries. Both functions require the lock to be held when calling.
This is intended for scenarios like a bus asserting that the bus lock is not
dropped during a driver call. There doesn't appear to be a man page to
document this in.
Reviewed by: jhb
- If there aren't spinlocks held, but there are problems with old
sleeplocks, they are not reported.
- If the spinlock found is not the only one, problems are not reported.
Fix these 2 problems.
Reported by: tegge
PCPU_PTR() curthread can migrate on another CPU and get incorrect
results.
- Fix a similar race into witness_warn().
- Fix the interlock's checks bypassing by correctly using the appropriate
children even when the lock_list chunk to be explored is not the first
one.
- Allow witness_warn() to work with spinlocks too.
Bugs found by: tegge
Submitted by: jhb, tegge
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
for registering top-level commands, show operands, and show all operands,
respectively
While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"
Submitted by: Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by: jhb
MFC after: 1 month
the free list and in this way avoid contention on the w_mtx.
In order to make the code simple, we rely on the rule that when the head
has not a child it also doesn't have other subsequent entries.
Actually this assertion is broken because we can free all the head
children and quit witness_unlock() with the head still allocated, with no
children and subsequent entries present.
Fix this by shifting the head if other entries are present and still
freeing the object, but leaving always an head.
- Fix witness_thread_has_locks() in order to report, correctly, if the
lock list linked to a specific thread has children or not based on the
above explained rule.
- Fix a printout into DDB's "show alllocks" command in order to show,
correctly, the process name that is really what we want.
- Fix style(9) for a comment.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reported by: Marko Kiiskila <marko dot kiiskila at nokia dot com>
Sponsored by: Nokia
of spurious witness warnings since lockmgr grew witness support. Before
this, every time you passed an interlock to a lockmgr lock WITNESS treated
it as a LOR.
Reviewed by: attilio
lock tracking and checks, doing just the former ones.
- Fix a bug where sysctl utility was printing crazy values when setting a
new value for debug.witness.watch [0]
[0] Reported by: yongari
1 means that witness is up and running.
0 means that witness is disabled but that it can be established later
again in effective way.
-1 means that witness is disabled permanently
- Fix a bug causing kernel to panic on witness disabling through
witness_watch. lock lists queues were still full of entries and this was
causing throubles with debugging stubs (like witness_thread_exit()).
Reported by: kris, yongari
Sponsored by: Nokia
- Speedup the lock orderings lookup modifying the witness graph from a
linked tree to a matrix. A table lookup caches the lock orderings in
order to make a O(1) access for them. Any witness object has an unique
index withing this lookup cache table.
- Reduce the lock contention on w_mtx acquiring it only when the LOR
actually happens and not in a sane case. In order to do this don't totally
flush lock lists (per-CPU spinlocks list and per-thread sleeplocks list)
but check for ll_count anytime we need to have to verify allocations sanity.
- Introduce the function witness_thread_exit() in the witness namespace which
should verify a thread doesn't hold any witness occurrence why exiting.
- Rename the sysctl debug.witness.graphs into debug.witness.fullgraph and
add debug.witness.badstacks which prints out stacks for LOR revealed.
This is implemented using the stack(9) support, which makes WITNESS to be
dependent by the STACK option or by the DDB (including STACK) option.
- Fix style(9) for src/sys/kern/subr_witness.c
The hash table approach has been developed by Ilya Maykov on the behalf of
Isilon Systems which kindly released the patch.
Jeff Roberson, ported the patch to -CURRENT and fixed w_mtx contention, on the
behalf of Nokia.
Submitted by: Ilya Maykov <ivmaykov at gmail dot com> (Isilon Systems), jeff
Sponsored by: Nokia
lock_object, using an unified field called lo_data.
- Replace lo_type usage with the w_name usage and at init time pass the
lock "type" directly to witness_init() from the parent lock init
function. Handle delayed initialization before than
witness_initialize() is called through the witness_pendhelp structure.
- Axe out LO_ENROLLPEND as it is not really needed. The case where the
mutex init delayed wants to be destroyed can't happen because
witness_destroy() checks for witness_cold and panic in case.
- In enroll(), if we cannot allocate a new object from the freelist,
notify that to userspace through a printf().
- Modify the depart function in order to return nothing as in the current
CVS version it always returns true and adjust callers accordingly.
- Fix the witness_addgraph() argument name prototype.
- Remove unuseful code from itismychild().
This commit leads to a shrinked struct lock_object and so smaller locks,
in particular on amd64 where 2 uintptr_t (16 bytes per-primitive) are
gained.
Reviewed by: jhb
and its children in the form:
"parent","child"
so that head and bottom of an oriented graph can be easilly detected and
various form of diagrams can be build.
The sysctl is called debug.witness.graphs and it is read-only; in order
to get the list of relations, a simple:
#sysctl debug.witness.graphs
will do the trick.
This approach has been choosen in order to support easilly things like
the DOT format and such. Soon, an auto-explicative awk script, which
filters simple informations returned by the sysctl and converts them into
a real DOT script, will be committed to the repository between examples.
Discussed with: rwatson
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
public namespace for WITNESS as they are only used internally so just
move them in the private namespace for the subsystem (with all related
supporting definitions).
the only one difference is that lockmgr*() functions now accept
LK_NOWITNESS flag which skips ordering for the instanced calling.
- Remove an unuseful stub in witness_checkorder() (because the above check
doesn't allow ever happening) and allow witness_upgrade() to accept
non-try operation too.
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential. Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E
This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.
The following major integrated peripherals are supported:
* On-chip peripherals bus
* OpenPIC interrupt controller
* UART
* Ethernet (TSEC)
* Host/PCI bridge
* QUICC engine (SCC functionality)
This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.
Approved by: cognet (mentor)
Obtained from: Juniper, Semihalf
MFp4: e500
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
In particular:
- smp_tlb_mtx is no longer used, so it is axed.
- smp rendezvous lock isn't really a leaf spin-mutex. Its bad placement in
the table, however, has been the source of a false positive LOR reporting
with the dt_lock. However, smp rendezvous lock would have had sched_lock
there for older lock, so it wasn't still a leaf lock.
- allpmaps is only used in ia32 architecture, so it is inserted in the
appropriate stub.
Addictionally:
- kse_zombie_lock is no longer present, so its definition is axed out.
- zombie_lock doesn't need to have an exported symbol, so just let's it be
declared as static.
Tested by: kris
Approved by: jeff (mentor)
Approved by: re
- Move the rtc_mtx spin lock out from under #ifdef SMP as it's just
not SMP-specific.
- Add a new spin lock pcib_mtx for locking "fast" interrupt handlers
of host-to-PCI bridge drivers on sparc64.
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
- Add new spinlocks to support thread_lock() and adjust ordering.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
patch:
- Do the correct test for ldt allocation
- Drop dt_lock just before to call kmem_free (since it acquires blocking
locks inside)
- Solve a deadlock with smp_rendezvous() where other CPU will wait
undefinitively for dt_lock acquisition.
- Add dt_lock in the WITNESS list of spinlocks
While applying these modifies, change the requirement for user_ldt_free()
making that returning without dt_lock held.
Tested by: marcus, tegge
Reviewed by: tegge
Approved by: jeff (mentor)
scheduler lock is not involved. sched_lock still protects the sched_clock
call. Another patch will remedy this.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
Tested by: kris, jeff
Group mutexes used in hwpmc(4) into 3 "types" in the sense of
witness(4):
- leaf spin mutexes---only one of these should be held at a time,
so these mutexes are specified as belonging to a single witness
type "pmc-leaf".
- `struct pmc_owner' descriptors are protected by a spin mutex of
witness type "pmc-owner-proc". Since we call wakeup_one() while
holding these mutexes, the witness type of these mutexes needs
to dominate that of "sleepq chain" mutexes.
- logger threads use a sleep mutex, of type "pmc-sleep".
Submitted by: wkoszek (earlier patch)
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
sleep lock missed the witness code, and the system will panic
immediately on boot if WITNESS is enabled.
Changed the witness definition to the new type.
wait (time waited to acquire) and hold times for *all* kernel locks. If
the architecture has a system synchronized TSC, the profiling code will
use that - thereby minimizing profiling overhead. Large chunks of profiling
code have been moved out of line, the overhead measured on the T1 for when
it is compiled in but not enabled is < 1%.
Approved by: scottl (standing in for mentor rwatson)
Reviewed by: des and jhb