Commit Graph

114 Commits

Author SHA1 Message Date
Paul Richards
2d5d3e2ca3 Added sysinstall 1994-10-15 14:37:30 +00:00
Paul Richards
cd56df5a1f Work in progress. 1994-10-15 14:34:49 +00:00
Gary Palmer
ea3a7da2c8 Move `ft' into machine-dependant section. 1994-10-15 00:08:57 +00:00
Andrey A. Chernov
b5df27e29f revision 1.6
date: 1994/03/06 08:55:02;  author: ache;  state: Exp;  lines: +4 -1
Stop count getty spacing problem, if we issue kill -1 1
----------------------------
revision 1.5
date: 1994/03/04 17:51:39;  author: ache;  state: Exp;  lines: +9 -2
I got a lot of
"getty repeating too quickly on port %s, sleeping"
from init.bsdi, it means that getty start and exit in five seconds.
This is common situation for poor quality Russian phone lines:
modem got CONNECT message and after retries got NO CARRIER.
So I introduce spacing count, it means that this warning and
sleep occurse only after GETTY_NSPACE times of sequental attempts.
----------------------------
revision 1.4
date: 1994/02/28 21:53:52;  author: ache;  state: Exp;  lines: +71 -10
I found (and fix) ugly bugs in init.bsdi (this bugs not present
in old init)

1) Init don't setup TERM environment variable for default terminal
type from /etc/ttys before calling getty/window.

2) When "kill -1 1" issued, init don't restart getty when
/etc/ttys parameters was changed (it only kill "off" end empty entries).

3) Small memory leak if "window" /etc/ttys parameter specified and
"kill -1 1" issued.

Obtained from: FreeBSD 1.x
1994-10-14 17:15:40 +00:00
Jordan K. Hubbard
288b78cdc3 Add ft.
Submitted by:	babb
1994-10-14 06:14:58 +00:00
Jordan K. Hubbard
3270fb5ece Put back the `:' in the trinary ?: so this can actually compile again! :) 1994-10-13 08:46:44 +00:00
Poul-Henning Kamp
72ab19aeb7 Added '-F file' option of mount_mfs. This allows me to make floppy images
without waiting for my floppy-drive all the time :-)  Might have other
interesting uses too.
1994-10-12 22:04:36 +00:00
David Greenman
3156bbb2d1 Backed out part of the last change that prevents the rpos table from
being output if <= 1 rpos; there is a bug in the kernel which doesn't
quite get along with this. Changed default #rpos to 1, and fixed up
manual page. Converted nrpos to 1 if user specifies 0.
1994-10-09 20:10:56 +00:00
Andrey A. Chernov
025dc82971 Modify adjkerntz to not write RTC clock per initial call,
suggested by Bruce
1994-10-04 19:15:13 +00:00
Gary Palmer
3e1d4f3258 Moce comcontrol, fdisk & mount_msdos out of machine-independance into
an I386 specific statement. Also add necessary code to allow
machine-dependance in this makefile

Reviewed by:	rgrimes
1994-10-02 03:38:08 +00:00
David Greenman
56499741c4 Fixed manpage to conform to current reality.
Submitted by:	Rod Grimes, with additional sentence by me.
1994-10-01 20:00:28 +00:00
David Greenman
7ce005d7c1 1) If nrpos <= 1, don't output rpos table (and set fs_cpc to 0) - disabling
the use of the rotational position table.
2) Allow specification of 0 rotational positions (disables function).
3) Make rotdelay=0 and nrpos=0 by default.

   The purpose of the above is to optimize for modern SCSI (and IDE) drives
that do read-ahead/write-behind.
1994-10-01 16:56:22 +00:00
David Greenman
9eb98cece8 Corrected message when no rotational position table is found. 1994-10-01 16:53:53 +00:00
Paul Traina
109f505bfb Router Discovery from Sun Microsystems 1994-09-30 21:16:09 +00:00
Paul Traina
bafea7d8a3 Router discovery code - Courtesy Sun Microsystems 1994-09-30 20:47:35 +00:00
Andrey A. Chernov
0fd4e043f4 Add code to skip "userquota"/"groupquota" options needed for
quotaon/quotacheck
1994-09-29 16:39:26 +00:00
Paul Traina
13e0abcba7 disklabel will dump core if you give it too few numbers to process
Obtained from: NetBSD misc/490 - John Kohl
1994-09-26 04:45:11 +00:00
Garrett Wollman
9e7b894ffe Fix one more _PATH_UNIX. 1994-09-24 03:18:32 +00:00
Garrett Wollman
4be4929c2b Get rid of _PATH_UNIX completely; use getbootfile(3) instead.
DANGER WILL ROBINSON!
_PATH_UNIX is currently defined as the literal string "don't use this".
I am of two minds about this myself, but wanted to get something into the
tree as quickly as possible.
1994-09-24 00:08:43 +00:00
Garrett Wollman
8e3847b2b9 Document more MIB variables. 1994-09-23 19:04:02 +00:00
Garrett Wollman
9d1275ccf4 Add two new flags:
-q just shut up, will you?!
	-u unlink output file after successful load
1994-09-22 22:35:53 +00:00
Garrett Wollman
d599144d24 Automatically load NFS and a bevy of other filesystems. 1994-09-22 22:17:02 +00:00
Garrett Wollman
fed2752194 Automatically load filesystem if not present in system and loadable. 1994-09-22 02:15:34 +00:00
Garrett Wollman
c974f9c6a6 Use getvfs* functions to map between VFS types and names.
Automatically load UFS if it is not present but is loadable.
(This won't happen now, but could happen if we fix NFS diskless support.)
1994-09-22 02:07:33 +00:00
Andrey A. Chernov
736c101eaf Correction for new sysctl interface 1994-09-19 23:18:41 +00:00
Andrey A. Chernov
bb84bd5c6b rewritted to use sysctl, no more /var/run/.adjkerntz now 1994-09-19 23:09:34 +00:00
Doug Rabson
541758b1c6 Added support for MSDOS file systems. 1994-09-19 18:47:12 +00:00
Doug Rabson
5cb2bca1a3 Added mount_msdos.
Obtained from: NetBSD
1994-09-19 15:30:36 +00:00
Andrey A. Chernov
0a7f0f3504 bugfix: change gidset[] type from int to gid_t 1994-09-19 13:52:38 +00:00
David Greenman
f3932b979d Various fixes:
modload doesn't honor it's -p argument.

It also will destroy the input file when you don't specify an output
symbol file with -o.

Submitted by:	John Kohl
1994-09-18 04:12:13 +00:00
Garrett Wollman
0eec3684ff Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and
arrange for that directory to get created by mtree.  Also, process secure
directory after all the others, because the programs there may overlay
ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
Bruce Evans
b60eb39594 Don't exit early if the device is not character special or if the
device driver cannot supply a label (real or faked).  This allows
you to practice using fdisk on disposable media (e.g., "dd count=1
<dev/zero >/tmp/junk; fdisk /tmp/junk", "dd count=1 </etc/passwd
>/tmp/fix-up-the-mess; fdisk /tmp/fix-up-the-mess") and allows me
to test DOSpartitioning and labelling on floppies.
1994-09-15 20:19:51 +00:00
Paul Traina
57f30b48dc Missing 'break' after setting interface route flag was causing interface
routes to not be properly marked as static.
1994-09-15 08:35:37 +00:00
Poul-Henning Kamp
66e5de4524 Fixed a bug where mount_nfs would core-dump if used with IP# directly.
Also moved some KERBEROS related stuff inside the #ifdef.

Should we always try to do a reverse lookup (IP#->name) ?
It has som merit, but is probably against the tradition or huh ?
1994-09-15 02:06:59 +00:00
Garrett Wollman
28d8923ed0 Add ip_mroute_mod, if NOLKM is not defined. 1994-09-14 22:23:47 +00:00
Garrett Wollman
49fbf8ddcf Makefile to generate the ip_mroute_mod.o LKM. After talking this over
with DavidG, I've come to the conclusion that unless and until we define
a new directory to put these things in, /sbin is the right place.
(OSF/1 does a lot worse for non-executables in /sbin...).
1994-09-14 22:11:51 +00:00
David Greenman
a68dd6cb87 Fixed slattach to do flags ioctl via network device rather than tty.
Submitted by:	Rich Murphey, and fixed up by me.
1994-09-14 05:40:56 +00:00
Jordan K. Hubbard
7df428cb21 Add fdisk to SUBDIR. 1994-09-13 05:32:20 +00:00
David Greenman
304b4edbac Woops, last patch was by Wolfgang Solfrank. 1994-09-09 11:16:03 +00:00
David Greenman
9fef312289 Two fixes from the NetBSD group (Charles Hannum):
1) dir.c: get byte order right in mkentry()
2) pass1.c: When doing -c2 conversion, do secsize reads for a symlink -
   not doing so was causing the conversion to fail because the device
   driver can't deal with short reads.
1994-09-09 11:06:27 +00:00
Paul Traina
a7ab72edf1 Fix endian bug introduced at Berkeley during the Net2->4.4-lite transition.
Fix is courtesy of the NetBSD folks.

Reviewed by:	pst
1994-09-08 01:06:46 +00:00
David Greenman
6052587146 Get rid of the need for the readonly mandatory option - set readonly
flags regardless of whether the user specified it.
1994-09-07 15:07:43 +00:00
Bruce Evans
127af73461 Fix punctuation. 1994-09-05 13:54:02 +00:00
Jordan K. Hubbard
db8ad19dab What cretin named both a global and a function "reboot"? Global
changed to Reboot.
Submitted by:	jkh
1994-08-28 10:00:49 +00:00
Nate Williams
e460cfd33f Bring in my changes from the 1.1 init.bsdi which causes a reboot (was a
halt before)  if init is sent an interrupt signal.  This is necessary
for <CTL><ALT><DEL> to do the right thing if enabled.
1994-08-27 21:32:01 +00:00
David Greenman
559c1aff1f Added comcontrol ...this thing *really* should be renamed. 1994-08-26 16:30:55 +00:00
David Greenman
cf8181ddff Set fs_clean. 1994-08-26 10:41:13 +00:00
Rich Murphey
97605525f5 Once again, slattach sources ported from 1.1.5 with fixes.
Reviewed by:	davidg, bde
Submitted by:	rich
1994-08-23 08:28:32 +00:00
Rich Murphey
76a4cb22c6 Slattach ported from 1.1.5 plus Bruce Evans suggested fix (close
FDs and fork before redialing) to prevent dialer from hanging with
newer sio.c.

Also moved history from the source to the cvs log (here) per
David G's suggestion.

This compiles but needs testing now...  Rich

/*
 * Hacks to support "-a|c|n" flags on the command line which enable VJ
 * header compresion and disable ICMP.
 * If this is good all rights go to B & L Jolitz, otherwise send your
 * comments to Reagan (/dev/null).
 *
 * nerd@percival.rain.com (Michael Galassi) 92.09.03
 *
 * Hacked to change from sgtty to POSIX termio style serial line control
 * and added flag to enable cts/rts style flow control.
 *
 * blymn@awadi.com.au (Brett Lymn) 93.04.04
 *
 * Put slattach in it's own process group so it can't be killed
 * accidentally. Close the connection on SIGHUP and SIGINT. Write a
 * syslog entry upon opening and closing the connection.  Rich Murphey
 * and Brad Huntting.
 *
 * Add '-r command' option: runs 'command' upon recieving SIGHUP
 * resulting from loss of carrier.  Log any errors after forking.
 * Rich 8/13/93
 *
 * This version of slattach includes many changes by David Greenman, Brian
 * Smith, Chris Bradley, and me (Michael Galassi).  None of them are
 * represented as functional anywhere outside of RAINet though they do work
 * for us.  Documentation is limited to the usage message for now.  If you
 * make improovments please pass them back.
 *
 * Added '-u UCMD' which runs 'UCMD <old> <new>' whenever the slip
 * unit number changes where <old> and <new> are the old and new unit
 * numbers, respectively.  Also added the '-z' option which forces
 * invocation of the redial command (-r CMD) upon startup regardless
 * of whether the com driver claims (sometimes mistakenly) that
 * carrier is present. Also added '-e ECMD' which runs ECMD before
 * exiting.
 *
 * marc@escargot.rain.com (Marc Frajola) 93/09/10
 *
 * Minor fixes to allow passive SLIP links to work (connections with
 * modem control that do not have an associated dial command). Added
 * code to re-check for carrier after dial command has been executed.
 * Added SIGTERM handler to properly handle normal kill signals. Fixed
 * bug in logic that caused message about no -u command to be logged
 * even when -u was specified and the sl number changes. Tried to get
 * rid of redundant syslog()'s to minimize console log output. Improved
 * logging of improper command line options or number of command
 * arguments. Removed spurious newline characters from syslog() calls.
 *
 * gjung@gjbsd.franken.de
 *
 * sighup_handler changed to set CLOCAL before running redial_cmd.
 * added flag exiting, so exit_handler is not run twice.  Fork
 * before reopening tty.
 */
1994-08-23 08:07:17 +00:00
David Greenman
40eaff5d0f Nuked the 2 second DTR wait; this is handled correctly in the sio driver. 1994-08-23 04:42:45 +00:00