This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
When nfsrv_checksequence() replies NFSERR_BADSLOT,
the value of nd_slotid is not valid. As such, the
reply cannot be cached in the session.
Do not set ND_HASSEQUENCE for this case.
Reported by: rtm@lcs.mit.edu
Tested by: rtm@lcs.mit.edu
PR: 260076
MFC after: 2 weeks
For most of these warnings, the variable is loaded
with data parsed out of an RPC messages. In case
the data is useful in the future, I just marked
these with __unused.
The check for the original len being >= retlen needs to
be done before the "if (nd->nd_repstat == 0)" code, so
that it can be reported as too small.
Reported by: rtm@lcs.mit.edu
Tested by: rtm@lcs.mit.edu
PR: 260046
MFC after: 2 weeks
For a LayoutReturn when using the Flexible File Layout,
error reports may be provided in the request.
Sanity check the size of these error reports and
check that they exist before calling nfsrv_flexlayouterr().
Reported by: rtm@lcs.mit.edu
Tested by: rtm@lcs.mit.edu
PR: 260012
MFC after: 2 weeks
If a pNFS server's DS runs out of disk space, it replies
NFSERR_NOSPC to the client doing writing. For the Linux
client, it then sends a LayoutError RPC to the MDS server to
tell it about the error and keeps retrying, doing repeated
LayoutGets to the MDS and Write RPCs to the DS. The Linux client is
"stuck" until disk space on the DS is free'd up unless
a subsequent LayoutGet request is sent a NFSERR_NOSPC
reply.
The looping problem still occurs for NFSv4.1 mounts, but no
fix for this is known at this time.
This patch changes the pNFS MDS server to reply to LayoutGet
operations with NFSERR_NOSPC once a LayoutError reports the
problem, until the DS has available space. This keeps the Linux
NFSv4.2 from looping.
Found during recent testing because of issues w.r.t. a DS
being out of space found during a recent IEFT NFSv4 working
group testing event.
MFC after: 2 weeks
If a pNFS server's DS runs out of disk space, it replies
NFSERR_NOSPC to the client doing writing. For the Linux
client, it then sends a LayoutError RPC to the server to
tell it about the error and keeps retrying, doing repeated
LayoutGet and Write RPCs to the DS. The Linux client is
"stuck" until disk space on the DS is free'd up.
For a mirrored server configuration, the first mirror that
ran out of space was taken offline. This does not make
much sense, since the other mirror(s) will run out of space
soon and the fix is a manual cleanup up disk space.
This patch changes the pNFS server to not disable a mirror
for the mirrored case when this occurs.
Further work is needed, since the Linux client expects the
MDS to reply NFSERR_NOSPC to LayoutGets once the DS is out
of space. Without this further change, the above mentioned
looping occurs.
Found during a recent IEFT NFSv4 working group testing event.
MFC after: 2 weeks
Some exported file systems, such as ZFS ones, cannot do VOP_ALLOCATE().
Since an NFSv4.2 server must either support the Allocate operation for
all file systems or not support it at all, define a sysctl called
vfs.nfsd.enable_v42allocate to enable the Allocate operation.
This sysctl is false by default and can only be set true if all
exported file systems (or all DSs for a pNFS server) can perform
VOP_ALLOCATE().
Unfortunately, there is no way to know if a ZFS file system will
be exported once the nfsd is operational, even if there are none
exported when the nfsd is started up, so enabling Allocate must
be done manually for a server configuration.
This problem was detected during a recent NFSv4 interoperability
testing event held by the IETF working group.
MFC after: 2 weeks
By default NFS server reports as scope and owner major the host UUID
value and zero for owner minor. It works good in case of standalone
server. But in case of CARP-based HA cluster failover the values
should remain persistent, otherwise some clients like VMware ESXi
get confused by the change and fail to reconnect automatically.
The patch makes server scope, major owner and minor owner values
configurable via sysctls. If not set (by default) the host UUID
value is still used.
Reviewed by: rmacklem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31952
Although it is not specified in the RFCs, the concept that
the NFSv4 server should reply to an RPC request within a
reasonable time is accepted practice within the NFSv4 community.
Without this patch, the NFSv4.2 server attempts to reply to
a Copy operation within 1 second by limiting the copy to
vfs.nfs.maxcopyrange bytes (default 10Mbytes). This is crude at
best, given the large variation in I/O subsystem performance.
This patch uses the COPY_FILE_RANGE_TIMEO1SEC flag added by
commit c5128c48df to limit the reply time for a Copy
operation to approximately 1 second.
MFC after: 2 weeks
The recently added VOP_DEALLOCATE(9) VOP call allows
implementation of the Deallocate NFSv4.2 operation.
Since the Deallocate operation is a single succeed/fail
operation, the call to VOP_DEALLOCATE(9) loops so long
as progress is being made. It calls maybe_yield()
between loop iterations to allow other processes
to preempt it.
Where RFC 7862 underspecifies behaviour, the code
is written to be Linux NFSv4.2 server compatible.
Reviewed by: khng
Differential Revision: https://reviews.freebsd.org/D31624
The NFSv4.2 Allocate operation sanity checks the aa_offset
and aa_length arguments. Since they are assigned to variables
of type off_t (signed) it was possible for them to be negative.
It was also possible for aa_offset+aa_length to exceed OFF_MAX
when stored in lo_end, which is uint64_t.
This patch adds checks for these cases to the sanity check.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31511
Since MAXPHYS now allows the FreeBSD NFS client
to do 1Mbyte I/O operations, add a sysctl called vfs.nfsd.srvmaxio
so that the maximum NFS server I/O size can be set up to 1Mbyte.
The Linux NFS client can also do 1Mbyte I/O operations.
The default of 128Kbytes for the maximum I/O size has
not been changed for two reasons:
- kern.ipc.maxsockbuf must be increased to support 1Mbyte I/O
- The limited benchmarking I can do actually shows a drop in I/O rate
when the I/O size is above 256Kbytes.
However, daveb@spectralogic.com reports seeing an increase
in I/O rate for the 1Mbyte I/O size vs 128Kbytes using a Linux client.
Reviewed by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30826
Commit d224f05fcf pre-parsed the next operation number for
the put file handle operations. This patch uses this next
operation number, plus the type of the file handle being set by
the put file handle operation, to implement the rules in RFC5661
Sec. 2.6 with respect to replying NFSERR_WRONGSEC.
This patch also adds a check to see if NFSERR_WRONGSEC should be
replied when about to perform Lookup, Lookupp or Open with a file
name component, so that the NFSERR_WRONGSEC reply is done for
these operations, as required by RFC5661 Sec. 2.6.
This patch does not have any practical effect for the FreeBSD NFSv4
client and I believe that the same is true for the Linux client,
since NFSERR_WRONGSEC is considered a fatal error at this time.
MFC after: 2 weeks
Commit 947bd2479b added support for the Secinfo_no_name operation.
When a non-exported file system is being traversed, the list of
security flavors is empty. It turns out that the Linux client
mount attempt fails when the security flavors list in the
Secinfo_no_name reply is empty.
This patch modifies Secinfo/Secinfo_no_name so that it replies
with all four security flavors when the list is empty.
This fixes Linux NFSv4.1/4.2 mounts when the file system at
the NFSv4 root (as specified on a V4: exports(5) line) is
not exported.
MFC after: 2 weeks
Without this patch, nfsd_checkrootexp() returns failure
and then the NFSv4 operation would reply NFSERR_WRONGSEC.
RFC5661 Sec. 2.6 only allows a few NFSv4 operations, none
of which call nfsv4_checktootexp(), to return NFSERR_WRONGSEC.
This patch modifies nfsd_checkrootexp() to return the
error instead of a boolean and sets the returned error to an RPC
layer AUTH_ERR, as discussed on nfsv4@ietf.org.
The patch also fixes nfsd_errmap() so that the pseudo
error NFSERR_AUTHERR is handled correctly such that an RPC layer
AUTH_ERR is replied to the NFSv4 client.
The two new "enum auth_stat" values have not yet been assigned
by IANA, but are the expected next two values.
The effect on extant NFSv4 clients of this change appears
limited to reporting a different failure error when a
mount that does not use adequate security is attempted.
MFC after: 2 weeks
There are several NFSv4.1/4.2 server operation functions which
have unneeded checks for the NFSv4 root being set up.
The checks are not needed because the operations always follow
a Sequence operation, which performs the check.
This patch deletes these checks, simplifying the code so
that a future patch that fixes the checks to conform with
RFC5661 Sec. 2.6 will be less extension.
MFC after: 2 weeks
The Linux client is now attempting to use the Secinfo_no_name
operation for NFSv4.1/4.2 mounts. Although it does not seem to
mind the NFSERR_NOTSUPP reply, adding support for it seems
reasonable.
I also noticed that "savflag" needed to be 64bits in
nfsrvd_secinfo() since nd_flag in now 64bits, so I changed
the declaration of it there. I also added code to set "vp" NULL
after performing Secinfo/Secinfo_no_name, since these
operations consume the current FH, which is represented
by "vp" in nfsrvd_compound().
Fixing when the server replies NFSERR_WRONGSEC so that
it conforms to RFC5661 Sec. 2.6 still needs to be done
in a future commit.
MFC after: 2 weeks
Commit b3d4c70dc6 added support for CLAIM_DELEG_CUR_FH to Open.
While doing this, I noticed that CLAIM_DELEG_PREV_FH support
could be added the same way. Although I am not aware of any extant
NFSv4.1/4.2 client that uses this claim type, it seems prudent to add
support for this variant of Open to the NFSv4.1/4.2 server.
This patch does not affect mounts from extant NFSv4.1/4.2 clients,
as far as I know.
MFC after: 2 weeks
The Linux NFSv4.1/4.2 client now uses the CLAIM_DELEG_CUR_FH
variant of the Open operation when delegations are recalled and
the client has a local open of the file. This patch adds
support for this variant of Open to the NFSv4.1/4.2 server.
This patch only affects mounts from Linux clients when delegations
are enabled on the server.
MFC after: 2 weeks
There is a NFSv4 file attribute called TimeCreate
that can be used for va_birthtime.
r362175 added some support for use of TimeCreate.
This patch completes support of va_birthtime by adding
support for setting this attribute to the server.
It also eanbles the client to
acquire and set the attribute for a NFSv4
server that supports the attribute.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30156
An Internet Draft titled "Towards Remote Procedure Call Encryption By Default"
(soon to be an RFC I think) describes how Sun RPC is to use TLS with NFS
as a specific application case.
Various commits prepared the NFS code to use KERN_TLS, mainly enabling use
of ext_pgs mbufs for large RPC messages.
r364475 added TLS support to the kernel RPC.
This commit (which is the final one for kernel changes required to do
NFS over TLS) adds support for three export flags:
MNT_EXTLS - Requires a TLS connection.
MNT_EXTLSCERT - Requires a TLS connection where the client presents a valid
X.509 certificate during TLS handshake.
MNT_EXTLSCERTUSER - Requires a TLS connection where the client presents a
valid X.509 certificate with "user@domain" in the otherName
field of the SubjectAltName during TLS handshake.
Without these export options, clients are permitted, but not required, to
use TLS.
For the client, a new nmount(2) option called "tls" makes the client do
a STARTTLS Null RPC and TLS handshake for all TCP connections used for the
mount. The CLSET_TLS client control option is used to indicate to the kernel RPC
that this should be done.
Unless the above export flags or "tls" option is used, semantics should
not change for the NFS client nor server.
For NFS over TLS to work, the userspace daemons rpctlscd(8) { for client }
or rpctlssd(8) daemon { for server } must be running.
and getxattr operations.
This patch optionally enables generation of read, readlink and getxattr replies
in ext_pgs mbufs. Since neither of ND_EXTPG or ND_TLS are currently ever set,
there is no change in semantics at this time.
It also corrects the message in a couple of panic()s that should never occur.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Use of ext_pgs mbufs will not be enabled until the kernel RPC is updated
to handle TLS.
This patch uses a slightly different algorithm for nfsrv_adj()
since ext_pgs mbuf lists are not permitted to have m_len == 0 mbufs.
As such, the code now frees mbufs after the adjustment in the list instead
of setting their m_len field to 0.
Since mbuf(s) may be trimmed off the tail of the list, the function now
returns a pointer to the last mbuf in the list. This saves the caller
from needing to use m_last() to find the last mbuf.
It also implies that it might return a nul list, which required a check for
that in nfsrvd_readlink().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Use of ext_pgs mbufs will not be enabled until the kernel RPC is updated
to handle TLS.
These macro definitions are no longer needed as the NFS OSX port is long
dead. The vfs_statfs macro conflicts with the vfsops field of the same
name.
Submitted by: shivank@
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2020)
Differential Revision: https://reviews.freebsd.org/D25263
The typedef mbuf_t was used for the Mac OS/X port of the code long ago.
Since this port is no longer used and the use of mbuf_t obscures what
the code does (and is not consistent with style(9)), it is no longer needed.
This patch replaces all instances of mbuf_t with "struct mbuf *", so that
it is no longer used.
This patch should not result in any semantic change.
I missed the "atomic" field of the RemoveExtendedAttribute operation's
reply when I implemented it. It worked between FreeBSD client and server,
since it was missed for both, but it did not conform to RFC 8276.
This patch adds the field for both client and server.
Thanks go to Frank for doing interoperability testing of the extended
attribute support against patches for Linux.
Submitted by: Frank van der Linden <fllinden@amazon.com>
Reported by: Frank van der Linden <fllinden@amazon.com>
I did not realize that zero length attributes are allowed, but they are.
This patch fixes the NFSv4.2 client and server to handle zero length
extended attributes correctly.
Submitted by: Frank van der Linden <fllinden@amazon.com> (earlier version)
Reported by: Frank van der Linden <fllinder@amazon.com>
When the code was ported to Mac OS/X, mbuf handling functions were
converted to using the Mac OS/X accessor functions. For FreeBSD, they
are a simple set of macros in sys/fs/nfs/nfskpiport.h.
Since porting to Mac OS/X is no longer a consideration, replacement of
these macros with the code generated by them makes the code more
readable.
When support for external page mbufs is added as needed by the KERN_TLS,
the patch becomes simpler if done without the macros.
This patch should not result in any semantic change.
Luoqi Chen reported a problem on freebsd-fs@ where a Linux NFSv4 client
was able to open and write to a file when the file's permissions were
not set to allow the owner write access.
Since NFS servers check file permissions on every write RPC, it is standard
practice to allow the owner of the file to do writes, regardless of
file permissions. This provides POSIX like behaviour, since POSIX only
checks permissions upon open(2).
The traditional way NFS clients handle this is to check access via the
Access operation/RPC and use that to determine if an open(2) on the
client is allowed.
It appears that, for NFSv4, the Linux client expects the NFSv4 Open (not a
POSIX open) operation to fail with NFSERR_ACCES if the file is not being
created and file permissions do not allow owner access, unlike NFSv3.
Since both the Linux and OpenSolaris NFSv4 servers seem to exhibit this
behaviour, this patch changes the FreeBSD NFSv4 server to do the same.
A sysctl called vfs.nfsd.v4openaccess can be set to 0 to return the
NFSv4 server to its previous behaviour.
Since both the Linux and FreeBSD NFSv4 clients seem to exhibit correct
behaviour with the access check for file owner in Open enabled, it is enabled
by default.
Reported by: luoqi.chen@gmail.com
MFC after: 2 weeks
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
None of these case were actually using the variable(s) uninitialized, but
I figured that silencing the warnings via initializing them made sense.
Some of these predated r355677.
This patch adds support for NFSv4.2 (RFC-7862) and Extended Attributes
(RFC-8276) to the NFS client and server.
NFSv4.2 is comprised of several optional features that can be supported
in addition to NFSv4.1. This patch adds the following optional features:
- posix_fadvise(POSIX_FADV_WILLNEED/POSIX_FADV_DONTNEED)
- posix_fallocate()
- intra server file range copying via the copy_file_range(2) syscall
--> Avoiding data tranfer over the wire to/from the NFS client.
- lseek(SEEK_DATA/SEEK_HOLE)
- Extended attribute syscalls for "user" namespace attributes as defined
by RFC-8276.
Although this patch is fairly large, it should not affect support for
the other versions of NFS. However it does add two new sysctls that allow
a sysadmin to limit which minor versions of NFSv4 a server supports, allowing
a sysadmin to disable NFSv4.2.
Unfortunately, when the NFS stats structure was last revised, it was assumed
that there would be no additional operations added beyond what was
specified in RFC-7862. However RFC-8276 did add additional operations,
forcing the NFS stats structure to revised again. It now has extra unused
entries in all arrays, so that future extensions to NFSv4.2 can be
accomodated without revising this structure again.
A future commit will update nfsstat(1) to report counts for the new NFSv4.2
specific operations/procedures.
This patch affects the internal interface between the nfscommon, nfscl and
nfsd modules and, as such, they all must be upgraded simultaneously.
I will do a version bump (although arguably not needed), due to this.
This code has survived a "make universe" but has not been built with a
recent GCC. If you encounter build problems, please email me.
Relnotes: yes
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
I do not know of an extant NFSv4.1 client that currently does a Setattr
operation for the ModeSetMasked, but it has been discussed on the linux-nfs
mailing list.
This patch adds support for doing a Setattr of ModeSetMasked, so that it
will work for any future NFSv4.1 client that chooses to do so.
Tested via a hacked FreeBSD NFSv4.1 client.
MFC after: 2 weeks
At the time of this nfsv4_sattr() call, "vp == NULL", so this patch doesn't
change the semantics, but I think it makes the code more readable.
It also makes it consistent with the nfsv4_sattr() call a few lines above
this one. Found during code inspection.
MFC after: 2 weeks
PR#223036 reported that INET6 callback addresses were not printed by
nfsdumpstate(8). This kernel patch adds INET6 addresses to the dump structure,
so that nfsdumpstate(8) can print them out, post-r346190.
The patch also includes the addition of #ifdef INET, INET6 as requested
by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server. However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.
This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after: 2 weeks
Relnotes: yes
