This matches directory structure used commonly in Linux-land, and it's
cleaner than mixing overlays into the existing module paths. Overlays are
still mixed in by specifying fdt_overlays in loader.conf(5).
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13922
r314467 introduced hw.usb.wsp.enable_single_tap_clicks to enable/disable
single-tap left click behavior. Update the man page to reflect the new
sysctl.
PR: 196624
MFC after: 3 days
X-MFC-With: r314467
Attaching syscon_generic earlier than BUS_PASS_DEFAULT makes it more
difficult for specific syscon drivers to attach to the syscon node and to
get ordering right. Further discussion yielded the following set of
decisions:
- Move syscon_generic to BUS_PASS_DEFAULT
- If a platform needs a syscon with different attach order or probe
behavior, it should subclass syscon_generic and match on the SoC specific
compat string
- When we come across a need for a syscon that attaches earlier but only
specifies compatible = "syscon", we should create a syscon_exclusive driver
that provides generic access but probes earlier and only matches if "syscon"
is the only compatible. Such fdt nodes do exist in the wild right now, but
we don't really use them at the moment.
Additionally:
- Any syscon provider that has needs any more complex than a spinlock solely
for syscon access and a single memory resource should subclass syscon
directly rather than attempting to subclass syscon_generic or add complexity
to it. syscon_generic's attach/detach methods may be made public should the
need arise to subclass it with additional attach/detach behavior.
We introduce aw_syscon(4) that just subclasses syscon_generic but probes
earlier to meet our requirements for if_awg and implements #2 above for this
specific situation. It currently only matches a64/a83t/h3 since these are
the only platforms that really need it at the time being.
Discussed with: ian
Reviewed by: manu, andrew, bcr (manpages, content unchanged since review)
Differential Revision: https://reviews.freebsd.org/D13793
There's a report of some regression in ports. Revert for now for an
exp run for this change in isolation (previous lld exp run also included
switching the linker used for ports to lld).
Also revert the src.conf.5 regeneration in r327824.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
Another solution would be to extend the Makefile.sys.inc idea, or a .no_obj
file, to more places but I would rather keep that limited to the top-level
build for now to not impact performance (statting a file in every make call)
or to bring unintended side-effects.
Reported by: jhb, imp
Sponsored by: Dell EMC Isilon
Akin to r327783 for amd64. lld has been usable for amd64 for quite some
time, but a couple of issues remained that affected i386. These were
recently addressed upstream in lld and merged into FreeBSD (r326831,
r326879, r326897, r326957), so we can now use ld.lld on i386 as well.
Similarly to amd64 this change enables lld only as the bootstrap linker
(used to link the kernel and userland libraries and executables), while
GNU ld.bfd is still installed as /usr/bin/ld and used for ports builds.
The ports collection is essentially ready to use lld as the system
linker for amd64, but many ports still have trouble with lld on i386,
because lld defaults to -ztext, disallowing relocations against readonly
segments. Thus switching the system linker (WITH_LLD_IS_LD) will happen
later on a per-arch basis.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
(I missed the Reviewed by and review link from r327783.)
Reviewed by: brooks, dim, bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13827
For some time we have been planning to migrate to LLVM's lld linker.
Having a man page was the last blocking issue for using ld.lld to link
the base system kernel + userland, now addressed by r327770. Link the
kernel and userland libraries and binaries with ld.lld by default, for
additional test coverage.
This has been a long time in the making. On 2013-04-13 I submitted an
upstream tracking issue in LLVM PR 23214: [META] Using LLD as FreeBSD's
system linker. Since then 85 individual issues were identified, and
submitted as dependencies. These have been addressed along with two
and a half years of other lld development and improvement.
I'd like to express deep gratitude to upstream lld developers Rui
Ueyama, Rafael Espindola, George Rimar and Davide Italiano. They put in
substantial effort in addressing the issues we found affecting
FreeBSD/amd64.
To revert to using ld.bfd as the bootstrap linker, in /etc/src.conf set
WITHOUT_LLD_BOOTSTRAP=yes
If you need to set this, please follow up with a PR or post to the
freebsd-toolchain mailing list explaining how default WITH_LLD_BOOTSTRAP
failed for your use case.
Note that GNU ld.bfd is still installed as /usr/bin/ld, and will still
be used for linking ports. ld.lld can be installed as /usr/bin/ld by
setting in /etc/src.conf
WITH_LLD_IS_LLD=yes
A followup commit will set WITH_LLD_IS_LD by default, possibly after
Clang/LLVM/lld 6.0 is merged to FreeBSD.
Release notes: Yes
Sponsored by: The FreeBSD Foundation
We currently use a set of subroutines in kern_gzio.c to perform
compression of user and kernel core dumps. In the interest of adding
support for other compression algorithms (zstd) in this role without
complicating the API consumers, add a simple compressor API which can be
used to select an algorithm.
Also change the (non-default) GZIO kernel option to not enable
compressed user cores by default. It's not clear that such a default
would be desirable with support for multiple algorithms implemented,
and it's inconsistent in that it isn't applied to kernel dumps.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D13632
Similar to calloc() the mallocarray() function checks for integer
overflows before allocating memory.
It does not zero memory, unless the M_ZERO flag is set.
Reviewed by: pfg, vangyzen (previous version), imp (previous version)
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D13766
The sid controller on the H3 is generally identical in location, size, and
efuse offset to the a64 and the a83t. The main difference is that the H3 has
a silicon bug that sometimes causes the rootkey (at least) to be garbled
unless first read by the prctl registers.
This device is currently not in our DTS and, as of now, is not yet present
in mainline Linux DTS.
Tested on: OrangePi One
I will be moving on to other life commitments this year and will not have
the time to support contributions as a ports committer, if able, until life
settles at the end of the year.
Discussed with: portmgr
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
This copies changes from NetBSD into FreeBSD's man page. I compared the
proposed changes against FreeBSD headers and modified them to match.
PR: 214602
Submitted by: fehmi noyan isi <fnoyanisi@yahoo.com>
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
A comment in Makefile.inc1 has long stated that LOCAL_DIRS are built last,
after the base system. Incremental improvements in parallel building over
the years have led to LOCAL_DIRS being built in parallel with base system
directories. This change allows the .WAIT directive to appear in LOCAL_DIRS
and LOCAL_LIB_DIRS lists to give the user some control over parallel
building of local additions.
Differential Revision: https://reviews.freebsd.org/D13622
This adds HardenedBSD which is a pseudo-fork of FreeBSD. It hasn't had a
release yet, but does does have active users and a community. As such
document it as a branch off of FreeBSD-stable. Ideally this adds enough
space so that future releases are easy enough to add.
filesystem larger than about 50-55 MiB.
The description of VM_KMEM_SIZE_SCALE is roughly as hand-wavy as my
understanding of the option, but at least mentioning that it's a factor
and giving an empirical datapoint that works will give folks some idea
of what to tweak if they have problems.
new clang 6.0.0 -Wtautological-constant-compare warning to the WARNS <=
6 level. (This warning is still being worked on upstream to reduce
false positives, but it is currently still too trigger happy.)
MD_READONLY flag for the md device automatically instantiated during
kernel init for an mdroot filesystem.
Note that there is specifically and by design no tunable or sysctl
control over this feature. Without this option, you already have control
over whether the mdroot fs is writeable using vfs.root.mountfrom.options
from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /"
or equivelent on the fly. This option is being added to provide a way
to make the mdroot fs truly immutable before userland code begins running.
Differential Revision: https://reviews.freebsd.org/D13411
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
Add atomic_load_<type> and atomic_store_<type>, and explain why they
exist.
Define the synchronizes-with relationship and its effects.
Reorder and revise some of the existing text. For example, more
precisely describe when ordinary accesses are atomic.
Reviewed by: jhb, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13522
temporary workaround. This fixes zfs booting generally, but breaks all
GELI booting by default. Add note to UPDATING to this effect. When the
GELI issues are resolved, this will be reverted.
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
rc.conf(5) documents the gifconfig_<interface> keyword, which is
no longer implemented. Document the replacement, which works with
cloned_interfaces as well.
Reviewed by: dab
Group Reviwers: manpages
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D13130
Several checks assume .CURDIR is resolved, such as for determining RELDIR from
SRCTOP/.CURDIR. If -C is used then the path is no longer resolved like it was
before which is problematic for symlinked source trees. A similar change was
also made to ports post bmake-20170301.
This fixes 'make -C <symlinked path> buildworld' using the wrong OBJDIR.
Reported by: rstone
Sponsored by: Dell EMC
This will cause an error if the wanted OBJDIR is not writable. Previously it
would cause the files to generate to the source tree. This was too obscure and
things like buildworld really expect a proper OBJDIR layout.
Sponsored by: Dell EMC
This change adds an implementation of a sysent for running CloudABI
armv6 and armv7 binaries on FreeBSD/arm64. It is a somewhat literal copy
of the armv6 version, except that it's been patched up to use the proper
registers.
Just like for cloudabi32.ko on FreeBSD/amd64, we make use of a vDSO that
automatically pads system call parameters to 64-bit value. These are
stored in a buffer on the stack, meaning we need to use copyin() and
copyout() unconditionally.
This warning checks whether a constant is out of range of the integer
type. An example is `comparison of 'u_int' > 4294967295 is always false`
and in this case the warning makes sense.
However, when the type is a typedef that can be either 64 or 32 bits the
if condition is only tautological in some configurations so this should
not be a warning that fails the build.
Reviewed by: dim
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D12912
type to any value. This can cause page faults and panics due to accessing
uninitialized fields in the "struct ifnet" which are specific to the network
device type.
MFC after: 1 week
Found by: jau@iki.fi
PR: 223767
Sponsored by: Mellanox Technologies
EMBEDDEDPORTS. [1]
Remove and update stale documentation from release(7) while here.
PR: 206344 [1]
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Add missing support for specifying I/O control flags during core reset,
and resolve a number of siba(4)-specific reset issues:
- Add missing check for target reject flags in siba_is_hw_suspended().
- Remove incorrect wait on SIBA_TMH_BUSY when modifying any target state
register; this should only be done when waiting for initiated
transactions to clear.
- Add missing wait on SIBA_IM_BY when asserting SIBA_IM_RJ.
- Overwrite any previously set SIBA_TML_REJ flag when bringing the core
out of reset. This fixes a lockup that occured when we brought up a core
(after reboot) that had previously been placed into RESET by siba_bwn(4).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13039
This includes a number of copyedits for the inline code documentation
comments, updates to the existing bhnd(4), bhndb(4), bcma(4), and siba(4)
man pages, and new man pages for bhnd_chipc(4), bhnd_pmu(4), bhndb_pci(4),
bhnd(9), and bhnd_erom(9).
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13021
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Commit these apart because compile testing doesn't guarantee I didn't made
some nasty mistake. No functional change intended.
AHCI emulation is useful for testing scenarios closer to the real
hardware. For example, it allows to exercise the CAM subsystem.
There could be other uses as well.
MFC after: 2 weeks
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This also makes it so that top-level build targets do not immediately create
the OBJDIR. Only sub-make targets will do so. This avoids creating object
directories for targets like 'make check-old' or creating unneeded
MACHINE.MACHINE_ARCH directories during 'make tinderbox'.
Reported by: npn, lifanov
Tested by: npn, Mark Millard
Sponsored by: Dell
This will allow disabling some things like AUTO_OBJ early if not needed for the
directory/targets, without putting special logic into share/mk/*.sys.mk.
Sponsored by: Dell
The old description has been inaccurate since at least 243271, if not
before.
Submitted by: will
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13108
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
The -fuse-ld flag is only meant to be passed to the compiler driver so
direct linker invocations should not include it.
Reviewed by: emaste, jhb
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D12910
syslog in libc secretly reconnects to the daemon.
Another issue is that we don't have any information from openlog(3) if we
succeeded to open log or not so we don't know if we are ready
to enter cabability mode.
Because all of that we decided we need a syslog service for Caspser.
Reviewed by: bapt@
Differential Revision: https://reviews.freebsd.org/D12824
The information here is somewhere between ancient to obsolete.
It refers to a time in the internet's history when manual routing
was still useful, talks about UUCP as if its modern, and refers
to documents which I had trouble tracking down.
It seems unlikely that a manual page in this form would be useful, so
just remove it.
Reviewed By: imp, tsoome, bdrewery(?)
Differential Revision: https://reviews.freebsd.org/D12924
DIRDEPS_BUILD works just fine without defining __objdir or dealing with any of
this logic. It handles its own TARGET_SPEC in local.meta.sys.mk as well. Just
let it do its own thing.
Sponsored by: Dell EMC Isilon
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
This avoids flipping the expected TARGET.TARGET_ARCH suffix / OBJTOP when it is
already set by a parent make which wants to control it more such as in
something like 'make native-xtools'.
Sponsored by: Dell EMC Isilon
- If OBJROOT is SRCTOP then don't add on TARGET.TARGET_ARCH. This
only happens at the top-level, and for sub-directories when the
user is clever with MAKEOBJDIRPREFIX=/.
- Don't bother checking 'test -w' on .CURDIR.
- Properly set OBJTOP/OBJROOT to SRCTOP in various needed cases.
- Check if the OBJDIR is writable even for *clean* targets since it
determines which .OBJDIR the user gets; If they cannot write to an
existing eligible .OBJDIR then it needs to clean in .CURDIR instead.
- Add guard to cleanworld/cleanuniverse from removing SRCTOP.
- Ensure OBJTOP is proper for .OBJDIR=.CURDIR which fixes finding
libraries since src.libnames.mk is based on OBJTOP.
- Avoid some chdir(2) for modifying .OBJDIR
Sponsored by: Dell EMC Isilon
This introduces a facility to EVENTHANDLER(9) for explicitly defining a
reference to an event handler list. This is useful since previously all
invokers of events had to do a locked traversal of the global list of
event handler lists in order to find the appropriate event handler list.
By keeping a pointer to the appropriate list an invoker can avoid this
traversal completely. The pointer is initialized with SYSINIT(9) during
the eventhandler stage. Users registering interest in events do not need
to know if the event is backed by such a list, since the list is added
to the global list of lists. As with lists that are not pre-defined it
is safe to register for the events before the list has been created.
This converts the process_* and thread_* events to using the new
facility, as these are events whose locked traversals end up showing up
significantly in ports build workflows (and presumably other workflows
with many short lived threads/procs). It may be advantageous to convert
other events to using the new facility.
The el_flags field is now unused, but leave it be so that this revision
can be MFC'd.
Reviewed by: bdrewery, markj, mjg
Approved by: rstone (mentor)
In collaboration with: ian
MFC after: 4 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12814
This avoids the obvious of not running the target when expected, but
also avoids META_MODE from showing 'Building'. This is mostly only
a problem when directly including bsd.obj.mk as many of these targets
were already .PHONY via bsd.sys.mk.
Sponsored by: Dell EMC Isilon
- Fix clear doorbell queue buffer for ADAPTER_TYPE_B
- Fix release memory resource when detach device
- Add support for ARC-1216, 1226 SAS 12Gb controllers
- Declare some functions as static
- Change checking dword read/write for IOP rqbuffer.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 2 weeks
The problem with it was a bogus .OBJDIR in some cases where creation of
object directories were purposely not attempted, such as for 'make cleandir'
and in etc/ sub-directories. In these cases bmake would start with a
bogus .OBJDIR like etc/ due to MAKEOBJDIR being a dynamic value based on
.CURDIR, SRCTOP, and OBJTOP. OBJTOP would not yet be defined but is
during early src.sys.obj.mk. That file and auto.obj.mk both were not
modifying .OBJDIR unless they expected to create the objdir. Thus in
these cases the .OBJDIR was left as etc/* rather than fixed to the
proper .CURDIR.
The issues were fixed in r325404 and r325416. An assertion to avoid the
bad .OBJDIR was added in r325405.
Sponsored by: Dell EMC Isilon
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
- Define TARGET_CPUARCH and use in libclang_rt as the basis for CRTARCH
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
If TARGET_ARCH isn't defined (host-builds), fallback to MACHINE_ARCH.
- Define CRTARCH to armhf when TARGET/TARGET_ARCH are set to arm/armv[67]
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which
affects the clang lookup path per `getArchNameForCompilerRTLib(..)` in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp, so chase clang and
Linux's assumed naming convention for hard-float arm architectures.
CROSSENV (in Makefile.inc1) sets CPUTYPE/MACHINE(_ARCH)? to the
TARGET*-relevant values when building the `libraries` target, so test
those variables instead.
- Add OLD_FILES/OLD_LIBS entries for TARGET/TARGET_ARCH == arm/armv[67]. This
impacts only arm/armv6 and arm/armv7.
PR: 222925
of this kind. Describe how to compile the driver into the kernel
and how to load it as a module.
This is useful for people using the MINIMAL kernel configuration file.
PR: 218610
Submitted by: Harald Schmalzbauer (bugzilla.freebsd@omnilan.de)
Reviewed by: noone (1 month inactivity)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12271
Apparently they have SRCTOP set, but won't have RELDIR set since they are
not in-tree.
Pointyhat to: bdrewery
Reported by: O. Hartmann <ohartmann@walstatt.org>, dhw
Tested by: dhw
Sponsored by: Dell EMC Isilon
The cleanobj target will not really remove the OBJDIR in this case,
it will only remove the OBJDIR if only clean targets are ran.
Sponsored by: Dell EMC Isilon
When AUTO_OBJ is enabled this change becomes redundant with the auto.obj.mk
check added in r325404. However, it is possible that new code is added
at some point between src.sys.obj.mk and auto.obj.mk that disables AUTO_OBJ.
That could leave make with a bogus and unsafe .OBJDIR in some cases.
Sponsored by: Dell EMC Isilon
auto.obj.mk is loaded before the Makefile which may have NO_OBJ set inside of
it. In that case we can't avoid creating the OBJDIR but we do need to avoid
using it. Fixing .OBJDIR in bsd.init.mk at least fixes all of the build .mk
files to have a proper .OBJDIR. It does not fix the Makefile itself but
usually if they have NO_OBJ set they are not inspecting ${.OBJDIR} anyhow.
It is ideal to only have this in bsd.init.mk and to remove it from bsd.obj.mk,
but then bsd.obj.mk would need to include bsd.init.mk. Doing something like
that would require more testing. It has been proposed that bsd.obj.mk not be
included directly but it has been possible for too long to do so to change it
at this point.
Note too that it may make sense to fix .OBJDIR even when AUTO_OBJ is not
enabled but the historical behavior has always been that NO_OBJ just avoids
running 'make obj', so .OBJDIR should already be .CURDIR.
Also while NO_OBJ seems like it should be removed at this point, it is not
always possible to fix Makefiles to properly use an .OBJDIR. The cost of
keeping NO_OBJ support is minimal.
Sponsored by: Dell EMC Isilon
Forcing MK_AUTO_OBJ to no is not really needed since bsd.obj.mk is protected
against 'rm -rf ${.CURDIR}' already. It was also flawed as if MK_AUTO_OBJ=yes
was in the .MAKEOVERRIDES already then it just remained on.
Sponsored by: Dell EMC Isilon
If for any reason we cannot set .OBJDIR==_objdir as desired
use .CURDIR so that at least the classic
.if ${.OBJDIR} != ${.CURDIR}
works and dangerous misstakes can be avoided.
Reviewed by: bdrewery
NO_OBJ has a very specific meaning in sub-directories in that no object
directory will be made. If a user wanted to skip the 'make obj' phase then
passing -DNO_OBJ would break all sub-directories from building properly. Using
NO_OBJ internally also causes issue with NO_OBJ handling being added in
share/mk/bsd.init.mk soon.
Sponsored by: Dell EMC Isilon
fine when a lot of different flows to be ciphered/deciphered are involved.
However, when a software crypto driver is used, there are
situations where we could benefit from making crypto(9) multi threaded:
- a single flow is to be ciphered: only one thread is used to cipher it,
- a single ESP flow is to be deciphered: only one thread is used to
decipher it.
The idea here is to call crypto(9) using a new mode (CRYPTO_F_ASYNC) to
dispatch the crypto jobs on multiple threads, if the underlying crypto
driver is working in synchronous mode.
Another flag is added (CRYPTO_F_ASYNC_KEEPORDER) to make crypto(9)
dispatch the crypto jobs in the order they are received (an additional
queue/thread is used), so that the packets are reinjected in the network
using the same order they were posted.
A new sysctl net.inet.ipsec.async_crypto can be used to activate
this new behavior (disabled by default).
Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae, jmg, jhb
Differential Revision: https://reviews.freebsd.org/D10680
Sponsored by: Stormshield
This is to prevent downstream checks from assuming they can trust .OBJDIR when
MK_AUTO_OBJ is yes, such as the bsd.obj.mk checks.
Pointyhat to: bdrewery
Sponsored by: Dell EMC Isilon
This will force any existing objects to rebuild if their .meta
files reference files from WORLDTMP. This is a problem after
the UNIFIED_OBJDIR effort caused buildworld and DIRDEPS_BUILD
to share an OBJDIR. Without cleaning these files the
Makefile.depend files end up with odd tmp/legacy/... entries
since some bootstrap-tools linger from there and otherwise
don't rebuild. Removing the files causes anything having
used WORLDTMP to rebuild.
Sponsored by: Dell EMC Isilon
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
